Related
Please help!!! I started messing with my phone about a week ago and I install the Android 1.6 dev. It will not flash anything, not even an spl. What am I missing. I almost feel bad asking because all of you seem to have such knowledge of this stuff. Thank you very much
I don't wanna bring your hopes down thinking this was help lol but u prolly tried flashing cyanogens new rom and its funny cause i was JUST about to post this same shiet. but anyways. i was thinking about flashing the dream file but i dunno if that owuld brick my phone or not. and just to clarify its the htc 1.6 dev right? i mean if thats the only 1? lol
yup
That is exactly what happened! I don't understand how this isn't a major issue and posted everywhere. If you figure it out make sure you let me know and I will do the same. Take it slow!
Can you explain what the problem problem is? What have you been trying to flash? Do you get errors? What recovery image are you using?
Btw, if you're flashing an SPL or radio with Cyans recovery, you can't use the trackball. It must be an update.zip which you install by pressing alt-s and reboot using home+power. If you don't it wont be installed.
Well, I don'tk now about the original poster, but I've tried flashing the OTA cupcake rom to downgrade. renamed to update, went into recovery but it says its not authorized. and.. im afraid to put the dream.nbh or w/e cause it might brick the phone.
PS: This is 1.6 without root. this is the dev ver. so we have the exclamation point recovery not cyan.
lapalways05 said:
Well, I don'tk now about the original poster, but I've tried flashing the OTA cupcake rom to downgrade. renamed to update, went into recovery but it says its not authorized. and.. im afraid to put the dream.nbh or w/e cause it might brick the phone.
PS: This is 1.6 without root. this is the dev ver. so we have the exclamation point recovery not cyan.
Click to expand...
Click to collapse
okay first you need a app called flashrec it will dl cyan recovery image then you reboot.But you need root first also teh dreaimg.nbh file which is RC29.
1.5 cupcake rc30 or something and up was patched with the one click root, that's why we were trying to downgrade to 1.5..
nothing works
I can't use the flash rec because it won't back up the recovery image! Everything I try to flash just goes to installation aborted! I don't know what to do!
It's b ecause 1.5 rc30+up (including 1.6) patched up the 1 click, but an answer would be nice
flash the dream image and start from scratch. that takes everything back to stock, then you can re-root. This thread can walk you through it
http://forum.xda-developers.com/showthread.php?t=491350
it doesnt work
I already tryed that but it won't let me flash the spl!
i tried that too
I tried flashin the dreaimg too. I have ran jf1.5 before and flashed themes and everything. That's why I don't understand why I can't flash anything. The 1.6 work but the recovery image isn't letting me flash anything at all! Once I installed the 1.6 dev it flashed me from the 1.4 cyanogen image to the exclamation image with a differnt bootloader. Ever since then I can't flash anything.
i think he means using camera + power unroot it.but im guessing we don't flash the SPL since we can't, we just flash the dream.nbh?
After Factory Reset
Guys,
I did factory reset but now I can not work with HTC dream as it is requesting me to cerate a gmail account, and I can not cerate because I do nto have internet in my mobile operator.
Does anyone knwo how to bypass this mesage?
please help meee.
r,
bhowd u do the factory reset?
I did it!!!
I had to download sdk, get it working, fastboot the the cyanogen 1.4 recovery image. After the it let me install all of my updates. YAAAAYYYY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
could you tell me the steps of what you did?
I'm stuck with ADP1 1.6 ><
Thanks a lot!!
This will work!!!
Trust me this will work because it took me hours to figure out. Install sdk, get it to work. They explain how to use the program on the forum. After you finally get into fastboot flash the cm 1.4 recovery image. After you do that you can bootup into that recovery and it will then read all of your zip files unlike that stupid exclamation recovery.
slightly confused
So you mean you used http://forum.xda-developers.com/showthread.php?t=502010 to figure out how to use the sdk right?
If not, can show me the link to that guide?
Many thanks!!!
yes
Yes, I used the sticky notes at the top of Dream Q&A to figure it out and it wasn't too fun.
I also posted this over at HowardForums:
Long story short, I was trying to root my phone and flash it with the latest CM using this guide: http://forum.xda-developers.com/showpost.php?p=4848777&postcount=506 Basically, somewhere along the line I f***ed up, and now when I try to turn it on it gets to the Rogers screen and hangs there. I've tried everything I could find to fix it and nothing has worked. I've tried basically everything I could in recovery, and when I go to fastboot, it's a wierd screen that has sort of a rainbow-ish background and for the first line that says what SPL it is, it doesn't say anything.
Just woundering if anyone knows how to fix this or if it's even at all fixable? And if not, is it possible for me to take it in to Rogers and have them replace it or is that not possible? I bought the phone in early July of this year, so I'm not sure if it's under warranty or anything.
Thanks in advance.
Well atleast you haven't bricked the thing. When you boot in to recovery, is it the stock recovery or Cyanogen's recovery image?
I think it's Cyanogen's. It's the one that says something like CM 1.4 + JF at the bottom.
Ah, in that case you're fine I'm not too familiar with the flashing process for cyanogen ROMs, so I can't really help you out there, but if you choose to use other ROMs you will only need to flash one file.
To get your (newly-rooted) phone working again, you could
download http://forum.xda-developers.com/showthread.php?t=567023 ROM
put it on the root of your sdcard (do not unzip it)
boot in to recovery
wipe
choose flash any zip
follow the promts to flash the ROM
If you don't have a card reader to mount the sdcard, boot in to recovery, then the console and type 'ums_enable' and it will mount on your computer. Then use 'ums_disable' when you're done.
Ok I'll try flashing another ROM and see if it works. Any suggestions for a good non-CM ROM xD?
I think I may have screwed it up since CM now needs you to flash the 1.6 Android, then CM or something. Maybe I did that part wrong. Anyways, I'll try another ROM and post back whether it works or not.
Thanks for the help. I tried flashing a AOSP T-Mobile 1.6 ROM I found and it worked. Now I'm woundering if anyone has any suggestions on other ROMs to try out?
DiSTroy3d said:
Thanks for the help. I tried flashing a AOSP T-Mobile 1.6 ROM I found and it worked. Now I'm woundering if anyone has any suggestions on other ROMs to try out?
Click to expand...
Click to collapse
Dwang's ROM sounds good, might want to give that a try. I meant to link to it in my last post, but I guess I forgot :-S
DiSTroy3d said:
Thanks for the help. I tried flashing a AOSP T-Mobile 1.6 ROM I found and it worked. Now I'm woundering if anyone has any suggestions on other ROMs to try out?
Click to expand...
Click to collapse
You can try Dwangs. Also, if you decide to install cyanogen's rom, follow his instructions on his wiki, but remove the radio.img inside the ADP recovery just to be safe and resign.
I just got a replacement G1 from Tmobile, for free bless their hearts, cause my headset is going to the crapper. I'm trying to update my raido to the 2_22_19_26I, as I did before with my first G1, so I can install the DangerSPL. I have tried with the stock recovery, Cyan's 1.4, and Amon-RA's 1.5.2 to install it, and each time, it goes about the update process as normal, asks me to reboot, I see the picture of the chip and then it takes me back to recovery.
Each time, though, I'm still at the 1_22_12_29. I check by turning on the phone, then Settings --> About Phone, and also by going into the SPL, still at the 1.
Any ideas?
EDIT: also I'm using the radio on HTC's developer website, so it's legit.
Uh, i'm not XDA police but i'm pretty sure this goes in Q&A.
You need a custom recovery before you can even upgrade the radio but are you on 1.5 doing the one-click?
One-click:
http://theunlockr.com/2009/08/22/how-to-root-the-mytouch-3g-or-g1-in-one-click/
"I have tried with the stock recovery, Cyan's 1.4, and Amon-RA's 1.5.2"
I've tried with many different recovery's.
jordancrockett said:
"I have tried with the stock recovery, Cyan's 1.4, and Amon-RA's 1.5.2"
I've tried with many different recovery's.
Click to expand...
Click to collapse
When your in rec mode you must flash the radio while there, i heard the rec gets deleted if you dont update the radio when you install a recovery.
rec mode? please restate what you just said.
jordancrockett said:
rec mode? please restate what you just said.
Click to expand...
Click to collapse
rec=recovery mode
The guide says flash the radio while your in recovery mode not after.
i've done the recommended one-click method, even went back and let my phone update itself back up to stock, but i still have radio 1.
jordancrockett said:
i've done the recommended one-click method, even went back and let my phone update itself back up to stock, but i still have radio 1.
Click to expand...
Click to collapse
Can you load roms since you said you tried recoveries?
I can load everything, ROM's, SPL's, different recoveries, boot.img's.
I've tried updating the radio before I upgrade the SPL, after, with a stock recovery, or with Amon-RA's/Cyanogens. I don't know why it's not working.
jordancrockett said:
I can load everything, ROM's, SPL's, different recoveries, boot.img's.
I've tried updating the radio before I upgrade the SPL, after, with a stock recovery, or with Amon-RA's/Cyanogens. I don't know why it's not working.
Click to expand...
Click to collapse
Donut roms(1.6) dont need the Haykuro or Hard SPL you can load roms with the one you have now.If you want to use hero or eclair then you'll need the radio and SPL.
Also if the radio is anything like the spl, don't use the trackball while flashing it
Another user and I, have this same issue with no solution, we have threads in dream q&a and dream general. I also used recovery flasher to gain root when I was on cupcake. My radio is older than yours though =/ if you can't find the threads ill post the links tmw, as I'm abt to sleep now..good luck hopefully we can all find a solution, or at least identify the source of the problem..
not sure if this will be of much help, but you can always try to revert back to the stock firmware using the dreaimg.nbh file and stock spl.
i had a friend who, like with your radio, couldn't flash the more recent custom recoveries.
whatever the reason was, i suggested that he just "unroot" and go back to android 1.0, stock spl, stock radio , whatever, and just re-root from there
phamous said:
not sure if this will be of much help, but you can always try to revert back to the stock firmware using the dreaimg.nbh file and stock spl.
i had a friend who, like with your radio, couldn't flash the more recent custom recoveries.
whatever the reason was, i suggested that he just "unroot" and go back to android 1.0, stock spl, stock radio , whatever, and just re-root from there
Click to expand...
Click to collapse
ust make sure when unroot you follow the instructions...somehow i bricked my first G1 when I was unrooting. Dont ask me how I did that but I did ha
thenameismax said:
just make sure when unroot you follow the instructions...somehow i bricked my first G1 when I was unrooting. Dont ask me how I did that but I did ha
Click to expand...
Click to collapse
haha, good point! when in doubt, just follow the guide!
this one, if you don't already have it,
http://forum.xda-developers.com/showthread.php?t=442480
shows you how to "downgrade/un-root" your device.
happy flashing!
I apologize to sound rude, but I've been with XDA and the G1 rooting community since 1.0. I know these are good, helping tips and guides, but I've tried to explain that I've done everything like that already, gone back to stock, gone up to cyan's 4.2.13, gone back to stock, then up to a stock 1.6, even with the stock updates, when it says writing radio, radio doesn't update.
your replies are appreciated, just not really relevant or helpful.
I was setting up a friends g1 and same thing, he got the phone from warranty exchange and I was able to downgrade, gain root, change recovery image and flash enom's rom with no issue. But upon boot up I saw his radio image was .29 and tried to update the radio. I kept getting something like "line 2: getting prop(device = dream)"
So I started all over rc29, root, recovery image and every time I try to update radio, same issue. Even when use Cyan's method and try the developer's image with radio update, it fails.
In the end, since enom's rom can use any radio, he was ok with it. But really i wanted to get his g1 on the latest radio image. I feel your pain as I researched the errors as well and couldn't find anything. Good luck.
Fabe
mdafabe said:
I was setting up a friends g1 and same thing, he got the phone from warranty exchange and I was able to downgrade, gain root, change recovery image and flash enom's rom with no issue. But upon boot up I saw his radio image was .29 and tried to update the radio. I kept getting something like "line 2: getting prop(device = dream)"
So I started all over rc29, root, recovery image and every time I try to update radio, same issue. Even when use Cyan's method and try the developer's image with radio update, it fails.
In the end, since enom's rom can use any radio, he was ok with it. But really i wanted to get his g1 on the latest radio image. I feel your pain as I researched the errors as well and couldn't find anything. Good luck.
Fabe
Click to expand...
Click to collapse
Yeah, that's exactly what I'm going through, except it's not throwing up any errors or anything. it updates, says "writing radio image...", reboots with the HTC symbol, and goes back to Recovery and Formats the CACHE like always. *sigh* maybe T-mobile found a way to mess with us after all?
Just a question, when u rooted, did u do it the old way or new way. And by old way that I used, was the DREAIMG.nbh, then on home screen the type cd /sdcard blah blah...
Ok, i have a need for a bit of help. I rooted and flashed to Jesusfreaks adp. I tried to get it to RC33. LONG story short, JF is installed. My kernel is 2.6.27-00392-g8312baf
NO clue what that means but im at fireware 1.5 and Build number CRB43
I want to get to Cyanogen. It looks a little smoother then JF and more frequently update. BTWi have a G1
I followed this guide TO THE T!
simplehelp.net/2009/10/04/how-to-install-cyanogenmod-4-1-99-on-your-g1-android-phone/
and after i rebooted, it took forever to boot (which is usual)
All my apps crashed. My desktop didnt even load. It had force closes like *android.phone and *android.mail
I figured it was because i was trying to mod off of the Jesus freak setup. Can anyone help me out and tell me how to either COMPLETELY wipe my phone and restore it to its origional G1 official build and then i can re-root to Cyanogen OR a way to mod from Jesusfreak to Cyanogen
copy and paste this into your browser... follow the directions...
wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_G1/Dream_Firmware_to_CyanogenMod[/url]
Just read that guide over and thats all exactly what i already did. I have tried to signed-dream flash and then after taht the cyan mod. It installed the OS no problem. It just didnt have any programs working. IT is as if the phone had the OS but no program files. It wouldnt even load the phone at all. it was a black screen with a status bar and infinate force close screens. Any idea what that is a result of? I had to flash recover back to my JF os
Try this:
1. Flash recovery Amon_Ra (Great improvment on JF and Cyans recovery)
Code:
Copy recovery-RA-dream-v1.5.2.img to the root of your sdcard
Boot into your current custom recovery (boot while holding HOME)
select console from the menu
$su (not required if you have root already)
#mount -a
#flash_image recovery /sdcard/recovery-RA-dream-v1.5.2.img
2. Boot into recovery (Home+Power)
3. Wipe Data/Factory Reset
4. Wipe EXT
5. Repair EXT
6. Flash Super D (I suggest Super D only because there is less flashing involved and it's a great improvement on the Cyan roms.. super quick too)
From here you should be set.
so if i already have root and all that, do i still need to follow step 1? Like flash with Amon_Ra? or can i just wipe, and reload the D rom? also your rom says its myHero2.2? is that a good rom? Im just trying to find the best rom to use on a g1. I have read up on Jesusfreak, its very stable, but it is pretty much just a open version of the regular tmobile os. THe only difference is the apps store is an older version. In your opinion, what is the best G1 rom and what are its percs?
thanks for all your help. This has been a working progress haha, finding a good rom and sticking with it. and can you give me a list of all the files needed for the best rom? if they have a step by step guide to it, thatd be great! i would look myself, but im still new at all this and there are like a bajillion different roms/ ways to load the rom. Im a PSP hacker, not an experienced phone guru
Tigger166 said:
so if i already have root and all that, do i still need to follow step 1? Like flash with Amon_Ra?
Click to expand...
Click to collapse
I would just so you're current on your recovery. The updated recovery has added features compared to JF's recovery
Tigger166 said:
or can i just wipe, and reload the D rom? also your rom says its myHero2.2? is that a good rom?
Click to expand...
Click to collapse
I would load the new recovery and then flash Super D. Again it's the most stable and is wicked fast. Yeah used to use myHero2.2 but i haven't updated my sig in a while. It's getting mundane at this point.
Tigger166 said:
Im just trying to find the best rom to use on a g1. I have read up on Jesusfreak, its very stable, but it is pretty much just a open version of the regular tmobile os. THe only difference is the apps store is an older version. In your opinion, what is the best G1 rom and what are its percs?
Click to expand...
Click to collapse
This is going to be more of a difficult question to answer. It just depends on what you're after. I really prefer Super D because of it's speed. Again its built from the Cyan roms so you get Cyan + extras. That's what I would go with. Simple, easy, and fast.
thanks for all your help. This has been a working progress haha, finding a good rom and sticking with it. and can you give me a list of all the files needed for the best rom? if they have a step by step guide to it, thatd be great! i would look myself, but im still new at all this and there are like a bajillion different roms/ ways to load the rom. Im a PSP hacker, not an experienced phone guru
Click to expand...
Click to collapse
Well that's the cool part about the community here at XDA. All the files are set up for you. To flash a rom:
Code:
Download the .zip file and place it on the root of your sd card
Reboot into recovery
Make a backup (i prefer switchrom)
Wipe Data/Factory Reset
Wipe EXT
Repair EXT
Flash rom from .zip
Reboot.
It's that easy.
Anyone got it or know where I can find it? Would like to have it so I can flash official updates. Been searching for it with no luck. Tried using among RA 2.0.0 but still failed.
take the version that suits you from the ones that say (completely stock)
http://android.modaco.com/content/g...build-info-and-repacks-stock-rooted-deodexed/
I suggest the last one if you really want COMPLETELY stock, others are just with root/radio update mixes...although I doubt you need the radio
Is the recovery image from FRG33 the same? Have you tried flashing that one with fastboot? If it doesn't work you can always flash a different one.
http://forum.xda-developers.com/wiki/index.php?title=Nexus_One/Roms
(The FRG33 package has recovery.img in there)
I don't see any reason to flash a new radio...
ahorriblemess said:
Is the recovery image from FRG33 the same? Have you tried flashing that one with fastboot? If it doesn't work you can always flash a different one.
http://forum.xda-developers.com/wiki/index.php?title=Nexus_One/Roms
(The FRG33 package has recovery.img in there)
I don't see any reason to flash a new radio...
Click to expand...
Click to collapse
waaahhh sorry I misread the topic XD I thought he wanted a whole rom...
Forget my links then, they don't have a stock recovery in them
Just as a note, you don't need to have a stock recovery to get OTA updates...as long as your recovery does NOT check for signatures...else you can simply install the update manually.
But anyways, if you REALLY want a stock recovery, just find any official update and flash the recovery.img that's included with it.
I tried using among RA 2.0.0 and toggle the signature off so it wouldn't check, but it still failed. I'm trying the frg83 to frg83d from the modaco site.
dls5375 said:
I tried using among RA 2.0.0 and toggle the signature off so it wouldn't check, but it still failed. I'm trying the frg83 to frg83d from the modaco site.
Click to expand...
Click to collapse
If you have RA 2 working, you can grab the update here and flash as zip
http://www.shipped-roms.com/shipped...signed-passion-FRG83D-from-FRG83.ecb21b75.zip
That's the same one I already tried, wont flash even with RA working. The rom I use is stock frg83 but with root. It always seems to fail to update as it trys to verify what I'm currently running.
dls5375 said:
That's the same one I already tried, wont flash even with RA working. The rom I use is stock frg83 but with root. It always seems to fail to update as it trys to verify what I'm currently running.
Click to expand...
Click to collapse
As of my small experience so far i can tell that it is very hard to trace where the error is, when using cooked stuff, just like all of a sudded i got this bloody red trackball all the time, when ever the screen is on.
Ok, if you got some little time, here's how i would go for that: (assuming you want pure stock with root)
- Wipe
- Either fastboot the few images contained in the latest modaco stock rom, or say rather as he described there, alternatively just install the 2 files from shipped rom, one will be named PASSIMG.zip, the other update.zip and proceed as the popular threads describe
- If all is "original" you'll be prompted by google to download the update, once you got the frg83D, you can then use Super Once Click rooting 1.5.1, it still works for the updated thing.
I'm convinced there are a lot of similar threads and solutions to your problem, but you may deliver a bit more description to let the community see you did some research.
I returned completely to stock using the info from another thread on here and it worked perfectly. Also returned to stock recovery. As soon as it booted back up I got the ota for frg83d. I then used super one click root. It was really easy to setup and use. Bring on 2.3!