Touch Pro2 won't go past bootloader screen PLEASE HELP!!! - Touch Pro2, Tilt 2 Windows Mobile ROM Development

Hi I have a Unlocked Touch Pro2 the phone just turn off & when straight to the bootloader screen I can hard reset it because everytime I press power it jumps right back to bootloader it says serial at the bottom but when connecting the usb it always malfunction so flashing via usb is out of it my bootader says
RHOD100 32M SS-BC
SPL-0.85.OLiNeX
MicroP(LED) 0x0A
MicroP(KEY) 0x0A
TURBO HW/TURBO SW
TP MFG DATA
522,528 820, 848
816, 206 216,200
216, 846 Calibrated
PLEASE HELP!!!

Connect the phone to your PC and run MTTY.exe. Choose USB connection. When connection is established, type the command "set 16 0". Manually soft reset with stylus. That will load the OS.

thesecondsfade said:
Connect the phone to your PC and run MTTY.exe. Choose USB connection. When connection is established, type the command "set 16 0". Manually soft reset with stylus. It will load the OS then.
Click to expand...
Click to collapse
Thanks will c if it works

thesecondsfade said:
Connect the phone to your PC and run MTTY.exe. Choose USB connection. When connection is established, type the command "set 16 0". Manually soft reset with stylus. That will load the OS.
Click to expand...
Click to collapse
Hi I like a newbie so can u please be more detail with the instructions sorry 2 be a nag.

have you tried SD card flash yet, MTTY may be unnecessary here

crachel said:
have you tried SD card flash yet, MTTY may be unnecessary here
Click to expand...
Click to collapse
yeah did won't go past the bootloader the phone don't charge neither as connect via usb will redownload the rom & try again apreciate all the help from everyone

crachel said:
have you tried SD card flash yet, MTTY may be unnecessary here
Click to expand...
Click to collapse
I agree. Copy the ROM of your choice to the root of your storage card if you have one. Rename it RHODIMG.nbh. Boot the bootloader screen by holding down the volume down button and the power button. It should flash from the MicroSD card.
Credit to mskip in the [Resources] Flashing your First GSM Rhodium Rom (For Noobs) thread.
mskip said:
Flashing Via MicroSD Card
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Rhodium Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to RHODIMG.nbh
4. Copy the RHODIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
Click to expand...
Click to collapse

soocerclaude said:
Hi I like a newbie so can u please be more detail with the instructions sorry 2 be a nag.
Click to expand...
Click to collapse
It's self explanatory.
Download MTTY.exe.
Connect the phone to your PC using the USB cable.
Run MTTY.exe.
In MTTY, change Port to USB, not one of the COM ports. Click Okay.
Type in the command "set 16 0". Enter.
Reset the phone with the sylus.
Not sure how this is different than my initial post.
Installing a stock ROM with your PC connection will usually get rid of any boot problems too.

AllTheWay said:
I agree. Copy the ROM of your choice to the root of your storage card if you have one. Rename it RHODIMG.nbh. Boot the bootloader screen by holding down the volume down button and the power button. It should flash from the MicroSD card.
Credit to mskip in the [Resources] Flashing your First GSM Rhodium Rom (For Noobs) thread.
Click to expand...
Click to collapse
wish I could man the phone is dead and not charging don't know if the usb port malfunction r the battery is **** don't know if a little water get in the usb port r what but that won't stop it from charging so it maybe the battery really don't know thanks everyone I will keep updating u on the status

soocerclaude said:
wish I could man the phone is dead and not charging don't know if the usb port malfunction r the battery is **** don't know if a little water get in the usb port r what but that won't stop it from charging so it maybe the battery really don't know thanks everyone I will keep updating u on the status
Click to expand...
Click to collapse
Normally when the phone is off it can charge the battery. Don't try to turn the phone on while charging maybe.

thesecondsfade said:
Normally when the phone is off it can charge the battery. Don't try to turn the phone on while charging maybe.
Click to expand...
Click to collapse
Thanks 4 the help but yeah the led charging light don't even comes on when connected to the charging & the phone is off it's not charging.

soocerclaude said:
Thanks 4 the help but yeah the led charging light don't even comes on when connected to the charging & the phone is off it's not charging.
Click to expand...
Click to collapse
Are you connected to the wall or your PC?
You can buy a battery, flash the phone, then return the battery.

thesecondsfade said:
Are you connected to the wall or your PC?
You can buy a battery, flash the phone, then return the battery.
Click to expand...
Click to collapse
Great idea bro will do

soocerclaude said:
wish I could man the phone is dead and not charging don't know if the usb port malfunction r the battery is **** don't know if a little water get in the usb port r what but that won't stop it from charging so it maybe the battery really don't know thanks everyone I will keep updating u on the status
Click to expand...
Click to collapse
I had the same problem...
http://forum.xda-developers.com/showthread.php?t=638277

Hi guys I just flash the stock rom through the sd card it still won't go past bootloader when I try 2 hard reset it goes to bootloader everytime u touch the power buttom

soocerclaude said:
Hi guys I just flash the stock rom through the sd card it still won't go past bootloader when I try 2 hard reset it goes to bootloader everytime u touch the power buttom
Click to expand...
Click to collapse
More information would be helpful. A picture of your bootloader screen or a transcription of all your bootloader text would be useful in determining the problem.

Here is the bootloader
RHOD100 32M SS-BC
SPL-O.85.OLINEX
MicroP(LED) 0x0A
MicroP(KEY) 0x04
TURBO HW/TURBO SW
TP MFG DATA
552,528 820,848
816,206 216,200
216,846 Calibrated

Hi guys do u think this is a hardware problem because the phone don't charge or connect via usb so it maybe a faulty usb port causing the phone to go straight to bootloader mode. The computer is making the noise when something is plugged in & then u get the message usb device unrecognized & just not charging or connecting.

Hi everyone I got past the bootloader loop but the phone still won't charge or connect to the computer so I am charging the battery through a battery wall charger I bought from ebay I think I will have to replace the usb port don't have a warranty anymore due to water damage I have no idea how the sticker turned red. So I will pay to fix it & see if it will charge and sync again.

Just restarted the phone and yeah it went straight back 2 the bootloader loop

Related

kaiser stuck on bootloader - assistance required

hi,
i have a kaiser that's stuck on the bootloader. i can connect using mtty and get the phone to boot then but that's less than ideal.
does anyone have 5 minutes to talk me through what i need to do to fix this ?
many thanks in advance.
mrdo.
I'm assuming after booting using MTTY it goes back to the SPL after the next soft reset?
Dave
Actually, If you can boot into the OS, Flash a new Version of HardSPL 3.29 by cmonex (it's in the Stickies in the ROM Development Forum).
Ta
Dave
yup -straight back into the spl upon reboot. :-(
is there any difference between 3.29 and 3.29 force usb ?
thanks for your assistance - very much appreciated. lugging a pc around for every time that my phone rebooted wasn't exactly top of my to do list.
c
mrdo said:
yup -straight back into the spl upon reboot. :-(
is there any difference between 3.29 and 3.29 force usb ?
thanks for your assistance - very much appreciated. lugging a pc around for every time that my phone rebooted wasn't exactly top of my to do list.
c
Click to expand...
Click to collapse
I assume you mean the jockyw2001 Hard SPL 3.29 and jockyw2001 Hard SPL 3.29 Force USB?
The difference is to do with people not been able to access USB when in the bootloader.
Can you boot into the OS and flash this Hard SPL by cmonex?
http://forum.xda-developers.com/showthread.php?t=420683
This should fix the problem hopefully.
Ta
Dave
i was having a look at that - that's just an nbh file. is that all that i need to flash hard spl ? as you may have guessed, this is the bit that i know nothing about ...
cheers
c
mrdo said:
i was having a look at that - that's just an nbh file. is that all that i need to flash hard spl ? as you may have guessed, this is the bit that i know nothing about ...
cheers
c
Click to expand...
Click to collapse
Just put the nbh file in the same directory as the KaiserCustomRUU.exe program.
Boot your phone into Windows Mobile, Run JumpSPL (or SSPL) on your phone.
Then Run KaiserCustomRUU.
Ta
Dave
cheers dave.
1) i don't appear to have KaiserCustomRUU.exe
2) how do i run JumpSPL (or SSPL) on my phone opnce i've rebooted.
i'm assuming that there's a sticky that you can point me in the direction of to save you spending too much time on this ...
thanks again
c
mrdo said:
cheers dave.
1) i don't appear to have KaiserCustomRUU.exe
2) how do i run JumpSPL (or SSPL) on my phone opnce i've rebooted.
i'm assuming that there's a sticky that you can point me in the direction of to save you spending too much time on this ...
thanks again
c
Click to expand...
Click to collapse
KaiserCustomRUU is everywhere. (RUU == Rom Update Utility)
If you download an attachment from this page, it will be in the Zip archive: http://forum.xda-developers.com/showthread.php?t=396922
Also follow Post #2 in this link for how to flash a new Hard SPL. (In the FAQ is a link to download the Jump SPL).
EDIT:
In closing follow those instructions in that link but replace the nbh from the jockyw2001 zip you download, with the nbh from cmonex.
Dave
cheers - will give that a go. thanks for your patience.
hi dave,
i'm following these instructions :
1. Plug the device into your PC
2. Copy Jump/Soft to your device. use JumpSPL If you have the "White Screen" issue, if you don't, you can use SSPL-KAIS.exe.
3. Take out your SD card & SIM Card.
4. Run Jump/Soft SPL on your device
5. Wait for the bootloader screen to appear and "USB" to show.
6. Right-click activesync, go into connection settings and ensure Allow USB Connections is unchecked
7. Unplug your device from the USB port, wait 5 - 20 seconds, plug it back in.
8. Run KaiserCustomRUU.exe and flash the SPL
i run jump spl from file manager on my device whilst still attached to my usb cable as per step 4.
the bootloader screen appears, as does usb ...
i unplug my device, wait 20 seconds, plug it back in and then nothing happens. is something supposed to happen just because i unplug the usb cable ?
c
mrdo said:
hi dave,
i'm following these instructions :
1. Plug the device into your PC
2. Copy Jump/Soft to your device. use JumpSPL If you have the "White Screen" issue, if you don't, you can use SSPL-KAIS.exe.
3. Take out your SD card & SIM Card.
4. Run Jump/Soft SPL on your device
5. Wait for the bootloader screen to appear and "USB" to show.
6. Right-click activesync, go into connection settings and ensure Allow USB Connections is unchecked
7. Unplug your device from the USB port, wait 5 - 20 seconds, plug it back in.
8. Run KaiserCustomRUU.exe and flash the SPL
i run jump spl from file manager on my device whilst still attached to my usb cable as per step 4.
the bootloader screen appears, as does usb ...
i unplug my device, wait 20 seconds, plug it back in and then nothing happens. is something supposed to happen just because i unplug the usb cable ?
c
Click to expand...
Click to collapse
Nothing is supposed to happen, When you unplug "USB" should be replaced by "Serial" and then change back to "USB" when plugged in. (It might not do though ) Just carry on...
Have you Unchecked "Allow USB Connections" before unplugging? If so just run the RUU after plugging back in.
Ta
Dave
mrdo said:
hi dave,
i'm following these instructions :
1. Plug the device into your PC
2. Copy Jump/Soft to your device. use JumpSPL If you have the "White Screen" issue, if you don't, you can use SSPL-KAIS.exe.
3. Take out your SD card & SIM Card.
4. Run Jump/Soft SPL on your device
5. Wait for the bootloader screen to appear and "USB" to show.
6. Right-click activesync, go into connection settings and ensure Allow USB Connections is unchecked
7. Unplug your device from the USB port, wait 5 - 20 seconds, plug it back in.
8. Run KaiserCustomRUU.exe and flash the SPL
i run jump spl from file manager on my device whilst still attached to my usb cable as per step 4.
the bootloader screen appears, as does usb ...
i unplug my device, wait 20 seconds, plug it back in and then nothing happens. is something supposed to happen just because i unplug the usb cable ?
c
Click to expand...
Click to collapse
After you unplug/replug DESELECT 'allow USB connections' then finish step 8.
it was already unchecked.
so when i unplug the usb cable, nothing seems to happen.
am i supposed to reset the device once it's plugged back into the usb cable ? how do i run RUU ?
(p.s i'm assuming that when i run RUU, it will just pick up the nbh file because it's in the same directory ?)
c
mrdo said:
it was already unchecked.
so when i unplug the usb cable, nothing seems to happen.
am i supposed to reset the device once it's plugged back into the usb cable ? how do i run RUU ?
(p.s i'm assuming that when i run RUU, it will just pick up the nbh file because it's in the same directory ?)
c
Click to expand...
Click to collapse
First, re-check "Allow USB Connections" box, and start the process from the beginning (un-checking it when required by the steps).
Just double click the RUU to run. The KaiserCustomRUU will pick up the first *.nbh file in it's directory, it is important that there is only 1 nbh file in this directory.
Thanks
Dave
sorry, it doesn't want to work for me. :-(
i'm assuming that resetting the phone will remove jumpspl from memory and thus invalidate the whole process ?
i have no way of getting into the os without resetting the device.
c
mrdo said:
sorry, it doesn't want to work for me. :-(
i'm assuming that resetting the phone will remove jumpspl from memory and thus invalidate the whole process ?
i have no way of getting into the os without resetting the device.
c
Click to expand...
Click to collapse
At what point to you need to reset your phone? It's not part of the instructions...?
Dave
hey dave,
sorry, i was being a dufus yesterday. everything seems to be working fine now.
have made a small donation - hopefully you'll continue to help other lost souls.
cheers and thanks for your assistance.
c
mrdo said:
hey dave,
sorry, i was being a dufus yesterday. everything seems to be working fine now.
have made a small donation - hopefully you'll continue to help other lost souls.
cheers and thanks for your assistance.
c
Click to expand...
Click to collapse
Thank you very much
Dave

Phone is dead after install CDMA rom to GPRS

Can someone help me please, I messed up big time, I accidentally installed ROM for CDMA version onto my GPRS phone. Is there anyway I can get it working again, or this is it? Now all it said on the boot screen is DIAMONDTOUCH, no version # or anything and it just stuck there. Please, any help is appreciated.
Thank
As long as you didn't flash a CDMA ROM that also contains a Radio, then you can manually enter bootloader, connect it to your PC, and flash a GSM ROM back to it.
How would I manually enter bootloader?
pros21 said:
How would I manually enter bootloader?
Click to expand...
Click to collapse
Hold VolDown, and reset/power on the phone. After a few seconds, you should see a tri-color screen. Plug in the USB cable, flash a GSM ROM.
I tried that, but the computer does not detect the phone.
No ActiveSync but the RomUtility for update run anyway ^^ Flash new ROM
D'rath
pros21 said:
I tried that, but the computer does not detect the phone.
Click to expand...
Click to collapse
Enter the bootloader with the cable disconnected. You should see "Serial" towards the bottom of the screen. Now plug in the USB cable. If you see "USB" appear, then you are good to go. Just start the ROM Update Utility, and let it run.

Cannot get serial to usb in bootloader

For some odd reason I can no longer get the the "serial" status to change to "usb". It charges but does not connect to activesync. I flashed many many times so I am not a noob at this but I might be making a noob mistake.
What I am using: SPL 1.54 (I use USPL 2.5). I am currently using Miri's v23 manilla 2.5. I am using the same pc (xp) and cables to flash.
What I've tried:
- used 3 different pc's and the original pc
- 4 different usb cables
- ticking/unticking the "enable faster data syncing" box in settings>connections>usb to pc
-ticking/unticking "allow usb connections" in activesync
-if I leave the cable in AND THEN put the phone in bootloader mode, the status is blank. When I remove the cable, it returns to "serial"
When the phone is on, it just doesn't seem to react (vista and xp)to the cable being plugged in. The led just shows that it's charging.
I pulled an all-nighter and I'm stumped.
Maybe you need to update the USB drivers. Same thing happened to me but it worked after updating the USB drivers as per this link.
http://forum.xda-developers.com/showthread.php?t=524619
I forgot the most important part-
Since the pc does not recognize that there's something plugged in, I cannot select the "HTC USB Sync" under device manager and proceed with updating the drivers. I don't think I need to but at this point I'm trying everything.
Unless there's another way of updating drivers without the phone showing up on the device manager...
Updated the usb drivers by plugging in an old htc device. The pc was able to recognize the other htc device and was able to switch from serial to usb.
But after the update, there was no improvement for the blackstone status.
Anyone? The phone still doesn't recognize the usb cable whether the phone is on or in bootloader, it just charges.
Any help is appreciated!
supadupa111 said:
Anyone? The phone still doesn't recognize the usb cable whether the phone is on or in bootloader, it just charges.
Any help is appreciated!
Click to expand...
Click to collapse
Seems something wrong with your device. Try to hard reset and do it again?
Or if you still cant connect to usb. there is another way to upgrade without connecting to pc. After upgrade to new ROM, try it again whether it can connect to pc or not? Here is some tips for you.
Connect your SD card to PC through microSD card. Copy all files from your SDcard to new folder in your PC. Then, right click on the microSDcard disk-->full Format by FAT32 (this step is very important).
After formatting SDcard, copy back all files to SDcard . Rename .nbh to BLACIMG.nbh (for Blacktone) and copy it to SDcard.
Insert your SDcard back to Touch HD. Turn off your device by Power button.
Go to Boot loader mode. Push and hold Vol. Down + press Power button.
After that your device with have a white screen with text " Press to power button for continue upgrade" press power button and it will start upgrade Rom.
You can check this video for more practical actions on youtube.(this video for HTC diamond2 but it's almost the same with Blacktone just different in rename step)
Hope it helps and cheer
Thanks for the tips =)
I've did a hard reset twice and still no luck.
I've tried to flash through SD but since I use USPL, it just hangs when I try.
If I have SPL 1.54.0000, is there something that can be flash through the SD without USPL?
supadupa111 said:
Thanks for the tips =)
I've did a hard reset twice and still no luck.
I've tried to flash through SD but since I use USPL, it just hangs when I try.
If I have SPL 1.54.0000, is there something that can be flash through the SD without USPL?
Click to expand...
Click to collapse
I have not tried this. I am on HSPL 1.56olinex but you can try my suggestion cause I think it's the only one you can choose now. I never ever use USPL. I think you can do it step by step and carefully.
Regard

Messed up device after bad flash

I messed up my device after cooking a defective rom "I confused some folders", and now my phone stays at the sony ericsson logo.
I don't have and mmc reader in order to put a rom on it.....Can I flash the x1 through the pc on the bootloader screen??
I never do this but this time I'd really appreciate a quick response
Yes you can do it
I had to do it several times when my PC shutdown during flash...
how plz ??....cuz i read how to flash using pc with the update utility but it seems I must first connect through activesync....tell me how you do it plz
Hold the power button down and the volume down button at the same time you will see tri-colored screen...plug into computer run customruu follow prompts...
Regards,
WC
darkhalf520 said:
how plz ??....cuz i read how to flash using pc with the update utility but it seems I must first connect through activesync....tell me how you do it plz
Click to expand...
Click to collapse
1-put customRUU and your rom file in the same folder on your PC
2-launch customRUU
3-put your phone on tricolor screen
4-connect your phone to your PC with the USB cable (your phone should displau "USB")
5-follow the instructions in customRUU
It is the same way that you use when you flash with activesync but this time you put your phone on tricolor screen yourself
just put your device in bootloader mode, then connect to PC, the device can identify serial or usb connection in bootloader mode.
Thanks soooooo much everybody, damn I adore this community......
This will help a lot in the future as i get to cook more and more and risk the bricking every time, thanks !!

Need assistance please

Hi,
I have a Rhodium and so far I have successfully flashed a lot of Roms untill today...
I am trying to flash another Rom via ActiveSync, so I have connected my phone to my PC, than run the CustomRuu.exe like always, but I am stuck at 0%.
I decided to flash using the SDCard and renamed the ruu_signed.nbh to RHODIMG.nbh and than I´ve enter in the BootLoader Mode, the device tries to load the Rom, but I´ve got a white screen saying "loading..." and stays like this forever.
I cannot even HardSPL the device. I run the Rhodium-HardSPL_V2_00R3.exe but i can not get the device properly synced.
I though I had an internal memory problem so I´ve formated it using a new tool found here: http://forum.xda-developers.com/show...12&postcount=1.
But now I´ve lost everything and I can not flash any Rom with activesync, always the same problem, stuck at 0% and then the message - "Error [276] : update error.", and if I flash from SDcard a white screen saying "loading..." and stays like this forever.
EDIT:
Can not HardSPL automatic flash, because could not get the device properly synced.
Can not HardSPL with Manual flash, stuck at 0% and then the message - "Error [276] : update error.#
Any help please.
Thanks
I have a Rhodium and so far I have successfully flashed a lot of Roms untill today...
Click to expand...
Click to collapse
Then I assume you already have hard-spl on your device installed. So trying to install it again will fail.
*Go into BootLoader Mode (do a Soft Reset while holding the "volume down" key on the left side of the device. Keep holding the "volume down" key until you see tricolour screen which is the bootloader mode, then release it) and verify the screen shows 0.85.OliNex, which is the HardSPL version* Is this the hard-spl version that you have?
You didn't mention which rom you tryed to flash. Did you try other roms?
Lennyz1988 said:
Then I assume you already have hard-spl on your device installed. So trying to install it again will fail.
*Go into BootLoader Mode (do a Soft Reset while holding the "volume down" key on the left side of the device. Keep holding the "volume down" key until you see tricolour screen which is the bootloader mode, then release it) and verify the screen shows 0.85.OliNex, which is the HardSPL version* Is this the hard-spl version that you have?
You didn't mention which rom you tryed to flash. Did you try other roms?
Click to expand...
Click to collapse
Thanks for your reply,
Yes , you are right I have already HardSPL installed - SPL-0.85.0linex.
I have tried several Roms even the Rhodium stock Rom. If I flash via activesync I get stuck at 0% and if I flash from the SDCard (RHODIMG.nbh) I get a white screen saying "loading...." with no action.
This is strange as I´ve flash so many roms so far
Have you reset both your device and computer before connecting?
Just leave it in Bootloader mode and connect it to your computer and then try flashing.
As long as you put the device in bootloader mode, you do not have to get it to sync. I've done this many times when a flash didn't go right for some reason (like I forgot something when I cooked it ).
jaxboater said:
Have you reset both your device and computer before connecting?
Click to expand...
Click to collapse
rgb-rgb said:
Just leave it in Bootloader mode and connect it to your computer and then try flashing.
As long as you put the device in bootloader mode, you do not have to get it to sync. I've done this many times when a flash didn't go right for some reason (like I forgot something when I cooked it ).
Click to expand...
Click to collapse
I did both things with no luck.
I have put the device in bootloader mode connected to the computer then I´ve run the customRUU.exe but I am always stuck at 0%
This is the info I have in the tricolor screen:
RHOD100 32M SS-BC
SPL-0.85.0linex
MicroP(LED) 0x0A
MicroP(KEY) 0x04
TURBO HW/TURBO SW
TP MFG DATA
501,529 794,848
797,208 217,213
210,853 Calibrated
I will put the device in the AC power all night to see if this is a battery issue.
Thanks
have you used a different usb cable just a suggestion
jaredcg said:
have you used a different usb cable just a suggestion
Click to expand...
Click to collapse
I had the same thought and I have used a different cable but the results are the same.
just my 2 cents i have done it before try to uninstall the driver from computer when you are in tri-color mode in the device manager then unplug the usb and replug in the same usb port if doesnt work try other usb port
JEANRIVERA said:
just my 2 cents i have done it before try to uninstall the driver from computer when you are in tri-color mode in the device manager then unplug the usb and replug in the same usb port if doesnt work try other usb port
Click to expand...
Click to collapse
I would try this first as posted by jeanrivera.
Also maybe you're customruu is somehow broken? Try downloading a new one. Also I don't know if it helps but when you flash via customruu do you have the image named ruu_signed.nbh? I don't know if it matters what kind of name it has, but it's just a thought

Categories

Resources