Hay guys I am having a ***** of a time getting web/mms to work on my metro flashed Diamond. I have tried install the Gaurdian remover cab an then the Metro mms/web cab file and editing all the settings by hand and still no go. Seems like the Diamond is not storing my password because when I try to connect to data it keeps asking for it . Anyone have any ideas what else I can try ?
Saiyan_Kennels said:
Hay guys I am having a ***** of a time getting web/mms to work on my metro flashed Diamond. I have tried install the Gaurdian remover cab an then the Metro mms/web cab file and editing all the settings by hand and still no go. Seems like the Diamond is not storing my password because when I try to connect to data it keeps asking for it . Anyone have any ideas what else I can try ?
Click to expand...
Click to collapse
This might help:
http://www.howardforums.com/showthread.php?t=1466303
Related
I've installed Mr Clean's ROM (excellent job, worked perfectly) then added some of the T-Mobile UK CABs from the new 2.4 Extended ROM:
MP_Customization_TMUK_Wizard(AKU2.x)_060420.CAB
MP_PictureVideo_reg_signed.CAB
MP-Shorcut-MMS1-JAVA6XX-CV-VOICE-EmailWiz-TMO-051215.CAB
P_UA_TMO_Wizard_Mar09.cab
PP_Connection_WIZ_TMUK_22102109.CAB
Signed_DiscoButton8.sa.CAB
Signed_Region_TMOUK_Wizard_Dec29.CAB
Most stuff now works fine, but not pic message sending, and I'm getting a message on re-booting about 'elatepushservice cannot be opened'.
Any thoughts on which other CAB I also need to install?
Cheeres,
Andre
I solved the MMS send/receive issue; I think the GPRS authentication setting needed to be PAP, not CHAP as it was set to. No idea what the difference is though, or which CAB is meant to set it.
Now all I need to do is get rid of that error message on bootup. Any ideas?
Andre
I thought someone might have commented on this? Anyway, I found there was a link in the Startup folder that was calling elatepushservice and thus causing the error message. So I removed the link, obviously one T-Mobile CAB had setup the link but not installed the program. It now boots cleanly.
Andre
I have a 8125 on cingular and have installed Voice command and Omapclock plus and i am getting a cannot start pushclient.lnk error on a soft reset. I tried moving the link from the startup folder but I still get it. Is this a similar issue?
badersk said:
I have a 8125 on cingular and have installed Voice command and Omapclock plus and i am getting a cannot start pushclient.lnk error on a soft reset. I tried moving the link from the startup folder but I still get it. Is this a similar issue?
Click to expand...
Click to collapse
I rather doubt it, mine was a link in startup which was pointing to a program which didn't exist. Yours seems like the opposite, something is trying to find a link but not seeing it.
Andre
Hi all,
I installed KaiserTweak yesterday, and although I think its a great application, Pocket Internet Explorer won't connect to any links. I don't know if it's related or not.
Firstly, the home page won't open, and no links open when selected in Favourites -- its says connecting at the bottom, and 0%.
I can connect with Opera, but I still like to use IE for some pages.
Anyone experienced this?
Thanks guys,
Ratzz
Does it look like its loading and then nothing comes up after it finishes real quick? I think this is a known issue. Forgot where I saw the fix. I just soft reset and its back.
Yep, thats it - tries the s/r but didnt fix.
I'd love to find that thread you mentioned...
Thanks for the info...
ratzz said:
Yep, thats it - tries the s/r but didnt fix.
I'd love to find that thread you mentioned...
Thanks for the info...
Click to expand...
Click to collapse
I had this problem on WM6.1 ROM with ce-star installed, PIE won't load any pages with this combination.
have you tried clearing the cookies and cache files? maybe a clean up is in order
All cleared up, but still no connection.
No error message, just a blank screen.
Any other ideas guys?
Not sure if Kaiser Tweak does this but did you change the location of where PIE stores the temp internet files. Also, try going back to the tweak and resetting everything to default. (for testing)
If you are using ATT to connect a hidden proxy has to be enabeled, don't know if that applies to T mobile as well.
i am having a similar problem with my IE. only difference is i cant seem to get an active internet signal for anything. it was working one second then not working the next. i cant send/recieve email or anything. any ideas guys??
megatec45 said:
If you are using ATT to connect a hidden proxy has to be enabeled, don't know if that applies to T mobile as well.
Click to expand...
Click to collapse
If using T-Mobile DO NOT enable hidden proxy.
It's funny how I just responded to you with this cause now I'm in the same boat! s/r does not fix. Working one day, gone the next. Now I've gotta search for the thread I saw with the fix. Are you using the latest ROM from AT&T for the tilt..?
SOLUTION...
Its easy just don't use your SD to keep Temp, cookies, history, etc...
I was having the same problem until that changes.
Where do you change theses settings.. I know... NOOB question. I have thought I saw it somewhere but now I cant find it...
My Solution
Raspster said:
Where do you change theses settings.. I know... NOOB question. I have thought I saw it somewhere but now I cant find it...
Click to expand...
Click to collapse
Or you could check in Tweak under PockectIE >Proxy Auto Detect> Enabled (proxy = disabled)
This setting solved my problem along with all the good folks here on xda!! I'm a NOOB but this worked for me.. I had everything else working and had used Opera Mini 9.5 beta and Opera Mobile successfully but could not get IE to load a page. It would act like it was loading, display 0%, but nothing happened. Hope this helps..
ATT Tilt
Rom: Dutty's 3.08...? (WM6.1)
Tweaks for pockey IE..? I did'nt see that option. Only general, memory, & security options under tools in IE. Is this located somewhere else or is it a CAB tweak..? Thanks.
I'm having the same problem, has anyone found a solution yet?
Hi folks
I'm unable to use Internet Explorer on my Kaiser as it freezes the device as soon as I try to visit any website. It hangs with the "Opening..." status message
Does anyone know a solution for this?
Thanks in advance!
Have you changed the location that PIE stores temp internet files?
khals said:
Hi folks
I'm unable to use Internet Explorer on my Kaiser as it freezes the device as soon as I try to visit any website. It hangs with the "Opening..." status message
Does anyone know a solution for this?
Thanks in advance!
Click to expand...
Click to collapse
In your settings find disable proxy button, this worked for me.
Thats because temp files and cookies are being stored on the mem card
both of you are assuming things.
I also used to have that same problem. I then replaced a webview.dll file and that solved the problem. I think that the .dll was supposed to help something with PIE opening large website or something like that. It's been awhile but if you search for it you should be able to find it. Not sure if this is the same solution for you but you can try it.
I did not change the temp file or cookie location. The proxy settings where not tampered with either. IE simply began freezing after a few months
I did however manage to find a temporary solution. If I rotated the screen by sliding out the keyboard, back and forth, it did work at times.
Now that I've updated to HTC's new WM6.1 ROM everythings back to normal again
Thanks for your help and suggestions!
I reflashed my phone using a Tael Rom and love it but now i cant recieve picture text messaging, and a manilaFix WM6.5.x error keeps poppping up. is there any relation? does anyone know how to fix it?
Deathdealer2009 said:
I reflashed my phone using a Tael Rom and love it but now i cant recieve picture text messaging, and a manilaFix WM6.5.x error keeps poppping up. is there any relation? does anyone know how to fix it?
Click to expand...
Click to collapse
which tael rom do u have? sense?
I am having the same problem. I am using the same ROM, I had to install Sense manually cause the one that came in the rom kept crashing when it was trying to start. I have T-mobile, the rom was able to detect all the settings for my network and configured my data and such, and has all the connections including tmobile mms, but it gives me errors as well, I have tried changing the settings manually multiple times, but I can not seem to get it right apparently. I am pretty tech savy, working on my masters right now in telecom and network management and I do tech support for syracuse university, I would think I would be able to figure it out.. lol
try posting in TAEL's ROM post.....he's pretty good about getting back with ya, if not several other developers also monitor other peoples ROM's and could help out
******RESOLVED***********
I just flashed my HD2 to "[Feb 13][ROM]------XBmod-WP7-V1.04------[7.0.7004]"
It seems to have installed just fine. but my mms, IE does not work. Its seems that my 3g data is having issues. I'm a USA T-mobile user. Anyone know how to fix this?
also what is an Xap and how do I use them?
I'm somewhat tech savy so I just need a link on how to use them i think. thanks for the help ahead of time =)
Download and run Connection Setup from here
And here's how I install XAP's
lawranceomega said:
Hi there XDA,
I just flashed my HD2 to "[Feb 13][ROM]------XBmod-WP7-V1.04------[7.0.7004]"
It seems to have installed just fine. but my mms, IE does not work. Its seems that my 3g data is having issues. I'm a USA T-mobile user. Anyone know how to fix this?
also what is an Xap and how do I use them?
I'm somewhat tech savy so I just need a link on how to use them i think. thanks for the help ahead of time =)
Click to expand...
Click to collapse
Ditto! Flashed my HD2 (T-Mobile Uk) and got the same issues. 3G wouldn't work at all, so no apps requiring data worked. Gave up in the end and flashed back to Android.
I did see a post about someone suggesting adding a new APN in the settings, but leaving the details blank (i.e. username and password) and just putting apn in the address, but I never tried it.
Thx iBimmer!!! I will do it right now and let you know how it turned out =)
Please help. I'm still having problems getting to install the XAP files. Any links or tutorials on how to use them?
The Deploying status just says preparing and hangs there. What am I doing wrong.?
Make sure your phone is unlocked (not at lock screen). Best is when you install XAP's to have the lockscreen setting to never.
Did you read the thread about Windows Desktop Marketplace?
You need to install Microsoft .NET Framework 4 and Windows Phone SDK on your PC.
I was missing Windows Phone SDK . HTC connection setup install and updated. i will try and use 3g now . Crossing my fingers
Ok got the XAP files installed, very easy once sdk was on my pc. I'm still have data connection issues. Does anyone know the manual setting for US Tmobile? or am I doing soething else wrong or need to do something else?
That's weird. I was trying to fix mine with editing APN settings and it didn't do it. Running Connection setup fixed it.
These are the settings that I have working on my iPhone: wap.voicestream.com, leave username and password blank.
lawranceomega said:
Ok got the XAP files installed...
Click to expand...
Click to collapse
Did you RUN it or you only installed it?
Thx so much iBimmer for your help. It was my APN settings. I had to put in "epic.tmobile.com". Anyhow all is well I have live services up and running. I even got a xboxlive player name now =). Now I just need to get hotmail contacts pic to stop flowing in the start screen, lol mt gf is getting pissing at all the pics lol.
Agian thx for your help iBimmer!!!!
lawranceomega said:
Thx so much iBimmer for your help. It was my APN settings. I had to put in "epic.tmobile.com". Anyhow all is well I have live services up and running. I even got a xboxlive player name now =). Now I just need to get hotmail contacts pic to stop flowing in the start screen, lol mt gf is getting pissing at all the pics lol.
Agian thx for your help iBimmer!!!!
Click to expand...
Click to collapse
I'm not sure what is required for the APN but I had the same problem and typed in "T-Mobile US" and saved it. It immediately started working.