I downloaded a rar file and it is password protected, does anyone know any software or tricks to unlock it so i can use it? Thanks
does anyone know?
If the file is meant for you, then you can ask the creator of the file for the password
Otherwise, there are programs available that tries out passwords for you until it gets it (brute force). But this can take a long time (seriously, we're talking days and months, not hours) depending on the complexity and length of the password.
http://www.rarpasswordcracker.com/
If you downloaded the file from a public source (filehoster, p2p, web),
just try google for "filename password".
If your lucky you may find it.
It should have been listed on the thread or page it came from. If not, perhaps it's not intended for you
How to unlok a rar file that is passwored protected
Try Stella WIN RAR password recovery software that has capacity for break RAR file password security and crack RAR password by using brute force attack, mask attack and dictionary attack.
Search in google:-Stella RAR password recovery software
Well, what you got to do is find whoever set the password and dangle them from a balcony until they give up the password the same way Suge Knight made Vanilla Ice sign his contract!
Rar Password Recovery Pro|Rar password Unlocker|how to remove password from rar file
Rar Password Recovery Pro|Rar password Unlocker|how to remove password from rar file
blackhatrussia.com/software/1288-rar-password-recovery-prorar-password-unlockerhow-to-remove-password-from-rar-file.html
Austin021296 said:
does anyone know?
Click to expand...
Click to collapse
You can use Notepad to crack the file.
Follow the procedure below
To do so, you just need to type several commands in notepad and run it, you would probably find RAR password. Now do the following:
Double-click bat file and launch a command prompt window.
Input RAR file name and press Enter to type RAR file path. Go to RAR file properties and remember its name and path. Then type this information in the appropriate location in the opening window.
Next, type commands in new notepad and save it as rar-password.bat. Hit Enter button to find specified RAR file password.
blinkblare said:
You can use Notepad to crack the file.
Follow the procedure below
To do so, you just need to type several commands in notepad and run it, you would probably find RAR password. Now do the following:
Double-click bat file and launch a command prompt window.
Input RAR file name and press Enter to type RAR file path. Go to RAR file properties and remember its name and path. Then type this information in the appropriate location in the opening window.
Next, type commands in new notepad and save it as rar-password.bat. Hit Enter button to find specified RAR file password.
Click to expand...
Click to collapse
nice
I've always thought that it is impossible. Where were you previously?
Related
Ok, I am going to ask a dumb question here. Please don't make fun of me.
I am trying to get through this country code problem so I can upgrade my PDA2K. I have copied GetDeviceData.exe to my device (drag-and-dropped it there from my PC). Now - how the heck to I run the thing?
See, I told you it was a stupid question!
Re
Dear,
You have to use File Explorer to locate the folder in which you dropped the program and then double click it. If you wanna make shortcut to that, do the following
- Copy the file
- go to windows directory in your ppc and spot for start menu and then double click for program folder, then paste (paste as shortcut) the program in that folder
now you should be able to execute the program directly from your program screen
hth
noob question...i managed to copy the kaisertweak.exe to \My Documents\Personal by just browsing to it and doing a 'Save As'. However, this doesn't seem to work for the XML...it wants to display it in the browser. I've tried renaming the xml file with a .dat extension, an .exe extension and without an extension...but it won't let me download the file. What's the best way to get the xml file from the web (http://www.fxnexus.com/storage/kaiser/kaisertweak.xml) to my device?
(I don't want to use an intermediary PC to transfer files.)
thx, fxs.
fxsunny said:
noob question...i managed to copy the kaisertweak.exe to \My Documents\Personal by just browsing to it and doing a 'Save As'. However, this doesn't seem to work for the XML...it wants to display it in the browser. I've tried renaming the xml file with a .dat extension, an .exe extension and without an extension...but it won't let me download the file. What's the best way to get the xml file from the web (http://www.fxnexus.com/storage/kaiser/kaisertweak.xml) to my device?
(I don't want to use an intermediary PC to transfer files.)
thx, fxs.
Click to expand...
Click to collapse
all you got to do is in your browser hit FILE > save page as. select only save xml, not full page. if that dont work, then just go here and download the ZIP file that contains both the new kaisertweak exe and xml files.
http://www.jongma.org/KaiserTweak/KaiserTweak.zip
NguyenHuu said:
all you got to do is in your browser hit FILE > save page as. select only save xml, not full page. if that dont work, then just go here and download the ZIP file that contains both the new kaisertweak exe and xml files.
http://www.jongma.org/KaiserTweak/KaiserTweak.zip
Click to expand...
Click to collapse
On IE ...on my device?? I don't have a File Menu option!
Once I load the xml file within IE...all I have at the bottom is a 'Back' menu option, and a 'Menu' menu option. 'Menu' has Edit, View, Tools etc...but no 'File'.
I tried doing a Edit --> Select All --> Copy and then, went into Word Mobile to paste it all and save as text...but then, I'm left with a '.txt' file that I cannot rename to '.xml'.
fxsunny said:
On IE ...on my device?? I don't have a File Menu option!
Once I load the xml file within IE...all I have at the bottom is a 'Back' menu option, and a 'Menu' menu option. 'Menu' has Edit, View, Tools etc...but no 'File'.
I tried doing a Edit --> Select All --> Copy and then, went into Word Mobile to paste it all and save as text...but then, I'm left with a '.txt' file that I cannot rename to '.xml'.
Click to expand...
Click to collapse
do it on your PC not in the WM. if you insist on using your device to dl, then i suggest installing a unzipper. then you can just download that kaiser tweak zip file to your phone. unzip it on the phone and you got both the exe and xml right on the phone.
Can't install Kaisertweak on AT&T Tilt
I've tried installing this two ways:
1. On my PC: when I click the .exe file, I get the message: "KaiserTweak.exe is not a valid Win32 application."
2. On my Tilt: when I click on the .zip file, it shows KaiserTweak.exe and KaiserTweak.xml, but the latter file has the Opera browser icon next to it and the description "Unknown Type." When I tap on KaiserTweak.exe, I get the message: "Unable to open file \Windows\-IA Zip Temporary Files\KaiserTweak.xml". Press OK to ignore and risk data corruption. Press Cancel to kill the program." When I press OK, nothing happens: I'm brought back to the display of the .exe and .xml files.
I'm assuming the program is not installing, and that I'll know that the installation was successful when I see KaiserTweak when I select Start/Programs.
Thanks.
Joel
When I press setup to install a programme it opens me an internet window with the commands on it and I cannot install it. What is the problem ?
i suspect you have downloaded a .cab file, which is associated with something like winrar so you have mistakenly extracted it and then tried to 'install'
BUT you need to copy the .cab to your phone and run the .cab to install the program
andy (yes i am talking from experience) T
Word! I agree, copy the whole .cab file to your Internal memory, just "double click" on it, and press "Yes". And btw, check again to be sure, if it is a .cab file!
there is no .cab file. Its a setup file ...
fixed it ...thanks
I have a question
I have the game "Worms" on my device. To specify it's on my storage card.
Today I made a hard reset.
Now I want to make a link to the .exe from Worms. Cause now I hae to go through file-explorer and I want it like it was before the hard reset. There was a link in my games folder before the hard reset under programs...
How can I do this again ?
resco file explorer is your friend
Sorry, but I don't unsterstand this....
It is being suggested you download and install Resco Explorer a pay-for app that does have a free trial. Resco allows you to Click/Hold an .exe file and Send To a StartMenu shortcut which are trying to do.
You can do it the hard way with Notepad but it is a pain.
http://www.resco.net/pocketpc/explorer/
Total Commander, I think will do it too, but I own Resco and am familiar with it. It is FREE.
Hi
If you use Resco File explorer you can create shortcut to any exe file.it wil be placed to your start menu.but you can do it manualy too.without useing Resco FE.
1. Open Notepad
2. Place the entire path to the file in the first line of the file, including the .exe file. You must use quotation marks if it resides in a directory with spaces, such as “\Program Files.”
3. Count the number of characters in the command line, including spaces and quotes, to get the length of the string.
4. In the .lnk file, the format for the line is
<length of string>#<command line>
5. Save the file and copy it to the "\Windows\Start Menu" directory on the Windows CE or Pocket PC device. This places the shortcut at the top level of the Start Menu.
You don't need a 3rd-party explorer or notepad. Creating shortcuts is very simple using the built-in file explorer.
Step 1: Start file explorer.
Step 2: Navigate to the folder the EXE is in.
Step 3: Highlight the EXE.
Step 4: Copy the EXE to the clipboard (Menu | Edit | Copy).
Step 5: Navigate to the start menu folder you want the shortcut in (typically \Windows\Start Menu\Programs).
Step 6: Paste a shortcut to the EXE (Menu | Edit | Paste Shortcut).
Step 7: Rename the shortcut if desired.
The shortcut will now be in start menu programs. You can now move it to and from the top-level start menu using Start | Settings | Menus.
V/R
Russell
First of all thanks to everyone for posting...
But I have one question....what do you mean with "highlight the EXE?"
I hope you can help me ^^
But I have one question....what do you mean with "highlight the EXE?"
Click to expand...
Click to collapse
When you navigate to a folder in File Explorer, the first file in the folder is highlighted (selected). Highlight the the executable file to which you need a start menu shortcut, either using d-pad down, or tap-n-hold with the stylus. This will be the file copied to the clipboard in step #4.
Note: I use the term "highlight" rather than "select" because selecting the file implies tapping on it, which will open the application. You don't want to start the application.
hammellose2 said:
First of all thanks to everyone for posting...
But I have one question....what do you mean with "highlight the EXE?"
I hope you can help me ^^
Click to expand...
Click to collapse
Do a search. There are many tutorials that can walk you through this.
I can't open this PWI file neither in my computer nor in xperia.
I thought may be you know some way to open it(or convert it) for me.
It contains some text:
Did you try google?
http://www.orneta.com/help/synchronisation/how.to.open.pocket.word.ink.pwi.files/
yes.
I have installed my mobiler to open it in ppc then copy to pc.but my ppc can't open it too!(may be because I typed the file in other rom now I have installed another rom)
I have read about activesync and outlook and ... but as I said I can't open the file in my ppc then I can't sync it with my computer.(As I think)
Sorry, the file turned out to be emppty when opened using the notes app on my experia. I sometimes change the file extension to .txt to open notes from pc... shows some junk but the text can be seen. Try that ... but i think ur file is corrupted.
Sorry, the file turned out to be emppty when opened using the notes app on my experia. I sometimes change the file extension to .txt to open notes from pc... shows some junk but the text can be seen. Try that ... but i think ur file is corrupted.
Click to expand...
Click to collapse
Because of the size it is not empty.may be corrupted but any way to restor/repair? thanks.
It is important for me if anyone can help