Related
I have setcpu installed on my Nexus One, along with the Zimage and lib files I need to overclock it. Can anyone tell me what an appropriate temperature range is for the Nexus, as would be shown in the SetCPU widget? I want to be sure I don't cause my Nexus to overheat.
Around 21-36 for me.. highest it ever got was 40.3 degrees.
crawler9 said:
I have setcpu installed on my Nexus One, along with the Zimage and lib files I need to overclock it. Can anyone tell me what an appropriate temperature range is for the Nexus, as would be shown in the SetCPU widget? I want to be sure I don't cause my Nexus to overheat.
Click to expand...
Click to collapse
rjhay22 said:
Around 21-36 for me.. highest it ever got was 40.3 degrees.
Click to expand...
Click to collapse
Is that in Celcius or Fahrenheit?
i would hope its in Celsius, or it would mean that the CPU is cold enough to freeze water
Alright thanks mines been on average about 99 degrees Fahrenheit
that's what I get when I'm charging my phone, so that's pretty high if that's what you have on standby.
crawler9 said:
Alright thanks mines been on average about 99 degrees Fahrenheit
Click to expand...
Click to collapse
Would it matter if I have a silicon case on it? And how high is dangerously high?
I have the same case, I wouldn't want it to go over 40C or bout 102 F. Thats pretty hot, I notice my phone gets sluggish and starts forceclosing too... What ROM are you running? And are you using OC-UV kernel? If not I suggest you get it.
crawler9 said:
Would it matter if I have a silicon case on it? And how high is dangerously high?
Click to expand...
Click to collapse
rjhay22 said:
I have the same case, I wouldn't want it to go over 40C or bout 102 F. Thats pretty hot, I notice my phone gets sluggish and starts forceclosing too... What ROM are you running? And are you using OC-UV kernel? If not I suggest you get it.
Click to expand...
Click to collapse
At the time I had SetCPU and was overclocked, I had Cyanogen's latest stable ROM (5.0.5.3?) installed. I was using the UV kernel. Last night I switched to Alpha r20 of MoDaCo's desire ROM for Nexus along with whatever kernel that comes packaged with.
You should be able to flash the OC-UV kernel by pershoot over Modacos desire ROM.
Battery life means more than OCing to me so here's my SetCPU profile settings if it helps.
Default setting: 998/245
Charging: 844/245
Standby: 245/245
Power<35%: 883/245
Failsafe batt > 40: 729/245
I should add that I'm charging right now, music player on, using my phone non stop and my batt temp is 95F.
crawler9 said:
At the time I had SetCPU and was overclocked, I had Cyanogen's latest stable ROM (5.0.5.3?) installed. I was using the UV kernel. Last night I switched to Alpha r20 of MoDaCo's desire ROM for Nexus along with whatever kernel that comes packaged with.
Click to expand...
Click to collapse
rjhay22 said:
You should be able to flash the OC-UV kernel by pershoot over Modacos desire ROM.
Battery life means more than OCing to me so here's my SetCPU profile settings if it helps.
Default setting: 998/245
Charging: 844/245
Standby: 245/245
Power<35%: 883/245
Failsafe batt > 40: 729/245
I should add that I'm charging right now, music player on, using my phone non stop and my batt temp is 95F.
Click to expand...
Click to collapse
Sounds like a good profile, and I think I'll try that myself and see where my temperature lies with those settings. Just curious... what are the advantages of using the OC-UV without overclocking?
Here's information on the kernel with the ROM I'm using, directly copied from the page with the ROMs.
What kernel are you using? Any other tweaks worth knowing about?
The ROM has the usual MCR tweaks (tun.ko, openvpn, busybox, dropbear etc.) and is running a custom kernel by teknologist and myself based on the stock .33 source (check the changelog below for more details). Himem is enabled. The kernel runs at standard clock speeds, uniquely only using undervolt at the lowest clock speeds.
Good question, I had an option to just undervolt it, there is a UV @stock speed kernel by Persianone too, but I opt to get the OC-UV just incase I need to show off how fast my N1 is. LOL. Better to have the option to use it when i need it.
crawler9 said:
Sounds like a good profile, and I think I'll try that myself and see where my temperature lies with those settings. Just curious... what are the advantages of using the OC-UV without overclocking?
Here's information on the kernel with the ROM I'm using, directly copied from the page with the ROMs.
What kernel are you using? Any other tweaks worth knowing about?
The ROM has the usual MCR tweaks (tun.ko, openvpn, busybox, dropbear etc.) and is running a custom kernel by teknologist and myself based on the stock .33 source (check the changelog below for more details). Himem is enabled. The kernel runs at standard clock speeds, uniquely only using undervolt at the lowest clock speeds.
Click to expand...
Click to collapse
rjhay22 said:
Good question, I had an option to just undervolt it, there is a UV @stock speed kernel by Persianone too, but I opt to get the OC-UV just incase I need to show off how fast my N1 is. LOL. Better to have the option to use it when i need it.
Click to expand...
Click to collapse
Alright thanks for all the help.
My pleasure
crawler9 said:
Alright thanks for all the help.
Click to expand...
Click to collapse
A few weeks ago when I still had my HTC Hero it was overclocked to 672Mhz (standard = 528Mhz). It gave me a little boost in performance on Froyo, also the batterylife wasn't decreased too much.
But with our N1 running on 1Ghz, will it give much difference when clocked to 1113/1152Mhz? And what about batterylife?
If SetCPU is used what are your settings then? Mine is currently running on stock speed, no SetCPU.
ZeppeMan said:
A few weeks ago when I still had my HTC Hero it was overclocked to 672Mhz (standard = 528Mhz). It gave me a little boost in performance on Froyo, also the batterylife wasn't decreased too much.
But with our N1 running on 1Ghz, will it give much difference when clocked to 1113/1152Mhz? And what about batterylife?
If SetCPU is used what are your settings then? Mine is currently running on stock speed, no SetCPU.
Click to expand...
Click to collapse
I have my nexus one rooted and flashed to MIUI Rom and clock @ 690mhz I get way better battery power. Before I would only get 6hr to 8hr if lucky now I get from 9hr to 13hr depending how much I use it.
set to 1.13 ghz
then screen off to minimum 245mhz
josemedina1983 said:
I have my nexus one rooted and flashed to MIUI Rom and clock @ 690mhz I get way better battery power. Before I would only get 6hr to 8hr if lucky now I get from 9hr to 13hr depending how much I use it.
Click to expand...
Click to collapse
So you underclocked it, what about the speed? It's not to laggy?
Nexus one can run reasonably smooth @ 600mhz and above. It might not open applications as fast as it will be @ 1GHz though.
i think 1Ghz is enough for n1
why do u want an overclock?
Sent from my Nexus One using XDA App
shreyas1122 said:
i think 1Ghz is enough for n1
why do u want an overclock?
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
I didn't said I want an overclock. It's allready very fast on 1Ghz (compared to my old Hero ), just wanted to know your thoughts about overclocking the N1.
im overclocked at 1152 mhz and profiles set for 245 max with screen off. Overclocking is nice because i like the snappiness but most people cant tell the difference between 998 mhz and 1152. its not needed to overclock but i think profiles help alot. just my two cents
Ok thx, I will try 1150Mhz and see (if it's stable and) what batterylife does. I'm also going to try underclocking.
I have my N1 only for a couple of weeks now and I must say, this phone is awesome. It's VERY fast compared to my old Hero. I remember when I was installing apps on my Hero it became very slow and couldn't do anything untill installing was finished. With the N1 you still can do things while installing apps without lag. The responsiveness and smoothness is also a lot faster. I loved my Hero Because it never let me down, ok it was all a bit slower, but it was getting there. Now with the release of Gingerbread (custom ROM) it became to slow for me and that's why I sold my Hero and bought the N1. It was very difficult to find one, because of the EOL (end of life). But eventually I found one and i'm very happy with it. The N1 is allready more 1 year old, but it still competes with the best phones out there.
I generally run overclocked at 1075MHz, which gives a good balance between battery power usage and processor power. My understanding is that a different voltage scaling method is generally used above 1075MHz, so power consumption will increase above that point.
Didn't knew the voltage would increase above 1075Mhz, will keep that in mind
ZeppeMan said:
Didn't knew the voltage would increase above 1075Mhz, will keep that in mind
Click to expand...
Click to collapse
This is, of course, dependent upon how the kernel is constructed, but this is what I have generally found to be true.
Give us some feedback
I overclocked it too 1075Mhz when screen is on (screen off 245Mhz). Will give my thoughts in a day or 2.
Just report that my battery drain is almost the same as on stock settings. I think it drains a tiny bit faster on 1075Mhz, but nothing major. On the other hand, I don't feel it's faster on 1075Mhz then on stock speed. Only benchmarks give me performance increase.
I'm now on CM6.1.1 with stock kernel (cyanogen), I tried other kernels like Wilmonks kernel,.. Although it was more responsive, battery was going down even faster. I get best battery results with stock kernel.
Hard to choose
more speed = more battery drain
less speed = longer battery
I think I stay with the last option (less speed = longer battery), because Wildmonks kernel doesn't give me enough performance increase over the stock kernel on stock speed.
I have mine at 998mhz, but overclocked 1152 while plugged into power.
Either way, its so easy to play with the clock settings, i'd just have a play with a bunch of different settings if i were you.
liam.lah said:
I have mine at 998mhz, but overclocked 1152 while plugged into power.
Click to expand...
Click to collapse
I'd love a how-to fire that..
mind sharing the app?
Sent from my Nexus One
ZeppeMan said:
wanted to know your thoughts about overclocking the N1.
Click to expand...
Click to collapse
well my thoughts: underclock!
so you can watch movies on it all night!
Sent from my Nexus One
shreyas1122 said:
I'd love a how-to fire that..
mind sharing the app?
Sent from my Nexus One
Click to expand...
Click to collapse
You can use SetCPU to create profiles based on different circumstances.
Me, I have mine clocked to a max of 1075 and min of 245 with the screen on, 576 max / 128 min screen off, 998/128 charging (to reduce heat - overclocking while power is applied can make it silly hot), and a failsafe to clock down to 576/128 if the temperature gets over 50*C.
Fabulous app.
Correct me if I am wrong. When you use setcpu to "ondemand", the CPU speed can ramp up to max whenever necessary, otherwise the speed will tune down to min especially in standby mode. In that way, you can enjoy the advantages of overclocking and underclocking the CPU speed i.e. increasing performance when needed and saving power when not in use, right? When I loaded Rod's MIUI and Wildmonk's kernel, I can underclock down to 128Mhz and overclock up to 1.152Ghz. At the end of the day, I still have over 60% of power left after not so heavily use (some web browsing, checking email and listen some music). Overall, setcpu is a great app for me.
I've undervolted my device and right now I have
100mhz - 825 mah
200mhz - 825 mah
500mhz - 800 mah
for some reason the 500mhz setting is stable and if I undervolt 100mhz/200mhz even more, I crash.
If I set my minimum processor power to 500mhz would I consume less batter than if I were to use 100mhz/200mhz?
Your phone spends most of its time in the lowest and highest cpu frequencies and just a small amount of time at the intermediate levels. Your undervolt for 500mhz probably isn't stable but it doesn't crash because it's only at that frequency for a very short amount of time. If you set the minimum to 500mhz at that voltage it will probably start playing up.
http:/ /db.tt/iy1bKVoB
graph of my cpu levels
Abit offtopic but what the hell!
I was wondering if there's any risks involved with undervolting?
I don't meen the crashes and freeze ups, but rather more like if there's any risk
to really damage your phone from it?
I have and still do alot of OC in the computer world, and do know what overvolting can do. But i'm still curious about what uv can do to your system.
Maskell said:
Your phone spends most of its time in the lowest and highest cpu frequencies and just a small amount of time at the intermediate levels. Your undervolt for 500mhz probably isn't stable but it doesn't crash because it's only at that frequency for a very short amount of time. If you set the minimum to 500mhz at that voltage it will probably start playing up.
http:/ /db.tt/iy1bKVoB
graph of my cpu levels
Click to expand...
Click to collapse
It's been my minimum even before posting this thread. I just started to wonder.
I've been on it for 10 hours now. I have 45% battery life left. Probably due to my 1700mhz being @ 1350mah right now.
I can assure you, it's VERY stable. It's so SMOOTH. Smoother than just having rocketrom and all that stuff. NO LAGS, NO SHUTDOWNS. ALL STABLE.
I can see better battery life, and CPU Spy says it used up 47% 1700mhz and 40% 500mhz. I think it's giving me better battery life.
It's evenly splitted up probably because I was using lulzactive governor.
but then again I didn't log my previous battery life without undervolting.
Some more insight would be nice.
SweCrow81 said:
Abit offtopic but what the hell!
I was wondering if there's any risks involved with undervolting?
I don't meen the crashes and freeze ups, but rather more like if there's any risk
to really damage your phone from it?
I have and still do alot of OC in the computer world, and do know what overvolting can do. But i'm still curious about what uv can do to your system.
Click to expand...
Click to collapse
There are alot of risks. Minor chance that you will cause hardware damage to your phone but I'm saying VERY minor. Just don't be stupid with voltages, like just suddenly overdropping the voltages. Your processor might die.
It's scary as hell, it crashes alot while testing and all that ****.
Feels good when you get it stable though.
TL;DR
Very slight chance to damage your hardware; only if you're very daring.
It should increase your battery life by atleast 20% if you reach the peak of your processors limit.
Bump, are there no other insights on this? Am I like, the only one who undervolted his/her note?
help
clairenix said:
Bump, are there no other insights on this? Am I like, the only one who undervolted his/her note?
help
Click to expand...
Click to collapse
I want to run 1700mhz as permanent and also wanted to undervolt but i wasnt sure how much by and what the risks are. Reason being is my phone gets hot with heavy usage running at 1400mhz so didnt want to go to 1700. I'll watch this thread with interest
kaos_king said:
I want to run 1700mhz as permanent and also wanted to undervolt but i wasnt sure how much by and what the risks are. Reason being is my phone gets hot with heavy usage running at 1400mhz so didnt want to go to 1700. I'll watch this thread with interest
Click to expand...
Click to collapse
I'm running 500-1700mhz.
Indeed it does get hot at 1700mhz, when I'm playing games but I've only at most played for 4 hours straight.
For what reason would you want to run 1700mhz-1700mhz?
clairenix said:
I'm running 500-1700mhz.
Indeed it does get hot at 1700mhz, when I'm playing games but I've only at most played for 4 hours straight.
For what reason would you want to run 1700mhz-1700mhz?
Click to expand...
Click to collapse
No sorry i meant running it at 1700 max, leaving it stock for the min. I just wanted to know how much i can safely undervolt 1700 by.
I actually have a question. I undervolted my note with SetCPU and I read that Tegrak Overclock Ultimate should be used as well together with SetCPU.
What does Tegrak Overclock do? GPU settings?
Would like to learn that part if anyone has any info.
kaos_king said:
No sorry i meant running it at 1700 max, leaving it stock for the min. I just wanted to know how much i can safely undervolt 1700 by.
Click to expand...
Click to collapse
I undervolted mine by about 100mah. I think I can tone it down by about 25mah more but I'm having a hard time getting it to stabilize.
1350 for my device is completely safe though.
Though, all processors are different. Yours could be better than mine and can withstand more UV-ing.
Goodluck!
liutszho said:
I actually have a question. I undervolted my note with SetCPU and I read that Tegrak Overclock Ultimate should be used as well together with SetCPU.
What does Tegrak Overclock do? GPU settings?
Would like to learn that part if anyone has any info.
Click to expand...
Click to collapse
It's basically the same with SetCPU aside from its voltages.
I do not know if it should be used with SetCPU with the note because from what I've researched. It's only a common practice with SGSII.
Tried setting 100 and 200 mhz to 825. Crashed my phone twice in one day using it, gonna revert back to 875
clairenix said:
I undervolted mine by about 100mah. I think I can tone it down by about 25mah more but I'm having a hard time getting it to stabilize.
1350 for my device is completely safe though.
Though, all processors are different. Yours could be better than mine and can withstand more UV-ing.
Goodluck!
Click to expand...
Click to collapse
Many thanks!
I will just experiment then, i didnt want to do that and then cause hw damage. I'll let you know how my processor gets on
Hey I'm new to this undervolting thing. I believe I just undervolted by -25 globally using kernel auditor but my mV numbers in the boxes don't match the ones in this video(https://www.youtube.com/watch?v=T8THaPMp2ao). For example my bottom box 1040mV but the video's is 1010mV. Can someone please tell me what I did wrong and how to fix it?
Not everyone's voltages are necessarily the same.
danarama said:
Not everyone's voltages are necessarily the same.
Click to expand...
Click to collapse
is there anyway to tell how much you've undervolted by?
Raymondlikesroot said:
is there anyway to tell how much you've undervolted by?
Click to expand...
Click to collapse
If the app doesnt tell you, Wipe data on the app and reboot. Stock voltages are applied every reboot, until the app applies custom.
find out what you devices bin number is, then youll know what voltage chart your device should use.
simms22 said:
find out what you devices bin number is, then youll know what voltage chart your device should use.
Click to expand...
Click to collapse
Do all custom kernels pay attention to the bin for voltages?
danarama said:
Do all custom kernels pay attention to the bin for voltages?
Click to expand...
Click to collapse
Hey I've been experimenting on my kernel mostly based off another youtube video and i've been getting systemui closes after I reboot. I know it is either lmt launcher or kernel auditor that has been causing it. Do you think kernel auditor is the culprit?
it has something to do with lmt . I figured it out.
danarama said:
Do all custom kernels pay attention to the bin for voltages?
Click to expand...
Click to collapse
as far as i know, yes.
Undervolting isn't going to do much of anything for long term battery life. CPU's are very minimal battery users for most day-to-day operations, so your actual battery life gains are going to be minimal, <5%, if you notice anything at all.
imnuts said:
Undervolting isn't going to do much of anything for long term battery life. CPU's are very minimal battery users for most day-to-day operations, so your actual battery life gains are going to be minimal, <5%, if you notice anything at all.
Click to expand...
Click to collapse
I'd say even less than 5%, more along the lines of less than 1%. but its decent for lowering temps slightly as well. me, I dont undervolt at all, yet see from 5.5-6.5 hours screen on.
simms22 said:
I'd say even less than 5%, more along the lines of less than 1%. but its decent for lowering temps slightly as well. me, I dont undervolt at all, yet see from 5.5-6.5 hours screen on.
Click to expand...
Click to collapse
Because you sir, are a wizard.
Hello guys I got some huge problems here.
I recently switched from my Z2 to the Z3+ and actually like the phone but the overheating is insane and especially kills Pokemon Go through CPU throttling, which runs smoothly on my old Z2 .
So far I am on 253, cleaned it up and tried a self modified and the zach beta9 Kernel and and runs quite bad on both. Is heating a lesser issue of 224? I actually do not want to reflash the whole system to 224 just to find out it doesn't get better.
Also is there a way to undervolt/underclock? I can change settings in Kernel Aduitor but I have the feeling the phone doesn't really care.
Help much appreciated - thanks!
Try Zach beta 8 kernel. Limit max cpu frequency by kernel auditor.
Still it's only your Goodluck if your device cools down. It's a bitter truth about this model.
waseemakhtar said:
Try Zach beta 8 kernel. Limit max cpu frequency by kernel auditor.
Still it's only your Goodluck if your device cools down. It's a bitter truth about this model.
Click to expand...
Click to collapse
Do you have a clue whether 224 or 256 make a difference?
I will try beta8 and report back.
Delvius said:
Do you have a clue whether 224 or 256 make a difference?
I will try beta8 and report back.
Click to expand...
Click to collapse
no there was no thermal improvements between these builds, dont flash your system back
but do underclock and tell us the results!
Im also affected by your exact problem
Try this kernel, seems promising. I haven't tried it since it doesnt have twrp.
http://forum.xda-developers.com/xpe...m5z-kernel-t3421630/post67813517#post67813517
Edit: Today I have flashed 256, haven't found any improvement. As per my experience 256 haven't brought any noticable change.
**** posted twice and dont know how to delete
Thank you for the replies!
Tested zach beta8, didn't help. Now I am testing http://forum.xda-developers.com/xperia-z4/orig-development/kernel-om5z-kernel-t3421630/ as suggested and if that doesn't help much also with http://forum.xda-developers.com/xperia-z4/general/kill-overheating-flash-zip-t3421782.
And Stamina Mode helps at least a bit.
Statusreport: It always runs bad. But best at the moment with root patched Stock Kernel (253) and that underclocking zip. Although I think that underclocking doesn't really help at all.
Delvius said:
Statusreport: It always runs bad. But best at the moment with root patched Stock Kernel (253) and that underclocking zip. Although I think that underclocking doesn't really help at all.
Click to expand...
Click to collapse
What are your temps? When does it start to throttle? Done any thermal-conf configuration to allow more heat?
---------- Post added at 21:03 ---------- Previous post was at 20:58 ----------
I know that @Trilliard has a very good and stable cpu governor where he has disabled two of the little and two of the big cores, this helps a lot if you underclock the remaining 4
Here are his files:
http://forum.xda-developers.com/xperia-z4/general/dont-custom-kernels-want-to-avoid-idle-t3409647
UPDATE: Added my edited files used to apply CPU tweaks (cores down clocked to 0.9 and 1.2ghz, two core disabled, tweaked cpu governor, power and others mods) and these files located in etc folder. Replace them and set correct permissions then reboot.
Click to expand...
Click to collapse
bjowol said:
What are your temps? When does it start to throttle? Done any thermal-conf configuration to allow more heat?
---------- Post added at 21:03 ---------- Previous post was at 20:58 ----------
I know that @Trilliard has a very good and stable cpu governor where he has disabled two of the little and two of the big cores, this helps a lot if you underclock the remaining 4
Here are his files:
http://forum.xda-developers.com/xperia-z4/general/dont-custom-kernels-want-to-avoid-idle-t3409647
Click to expand...
Click to collapse
Actually I didn't know about this combination - I will try it thanks!
Do you know about a thermal-conf? Actually never tried one. The phone gets hot indeed but I still think there might be some space before it actually melts.
Delvius said:
Actually I didn't know about this combination - I will try it thanks!
Do you know about a thermal-conf? Actually never tried one. The phone gets hot indeed but I still think there might be some space before it actually melts.
Click to expand...
Click to collapse
Thats what i thought as well i have my own here, its based on another persos post, but i dont remember where...
Anyways, his camera mod worked, but cpu throttle was not tampered with, and it caused a very unbalanced throttling... Ok yay i can use the camera linger and fluently, but when i exit the camera app, i cant use the phone couse its runnig at 348 mhz...
So i i did some modifications to it cpu never get under 840 for little cores, so your phones menues end web browsing are always safe from performance drops.
I made it to be able to play Pokemon go, and achieved a lot better resault than without any changes.. still prefer playing on my shield tablet, but if i dont have it around when theres a lot od pokestops nearby, then this will work for me.
While playing Pokemon go it does not go over 80 degrees, but using snapshat it can get to 85, so dont use snap for to long
Let me know if it worked for you!
bjowol said:
Thats what i thought as well i have my own here, its based on another persos post, but i dont remember where...
Anyways, his camera mod worked, but cpu throttle was not tampered with, and it caused a very unbalanced throttling... Ok yay i can use the camera linger and fluently, but when i exit the camera app, i cant use the phone couse its runnig at 348 mhz...
So i i did some modifications to it cpu never get under 840 for little cores, so your phones menues end web browsing are always safe from performance drops.
I made it to be able to play Pokemon go, and achieved a lot better resault than without any changes.. still prefer playing on my shield tablet, but if i dont have it around when theres a lot od pokestops nearby, then this will work for me.
While playing Pokemon go it does not go over 80 degrees, but using snapshat it can get to 85, so dont use snap for to long
Let me know if it worked for you!
Click to expand...
Click to collapse
Oh nice! Thank you a lot! I will totally try it out directly when PTC comes back alive. X)
What kernel and governors do you use?
Delvius said:
Oh nice! Thank you a lot! I will totally try it out directly when PTC comes back alive. X)
What kernel and governors do you use?
Click to expand...
Click to collapse
Im using stock kernel, may switch to another soon. Im using stock bcause of batterylife and idle power consumption
Im using the governor and cpu modifications in this post ; http://forum.xda-developers.com/xperia-z4/general/dont-custom-kernels-want-to-avoid-idle-t3409647
Hmm. Still runs ****ty.
Can anyone give me a short guide how to edit thermal and governors?
According to my observations the phone gets hot and then cold. I think the throttle is more aggressive and needed and I want to make it less aggressive.
Update:
I made my own modifications to the thermal engine. It is pretty bad for battery I guess but I had a very good expierence playing Pokemon Go with it today. Yes the phone gets hot. Like it doesn't drop below 70°C while playing and regulary hits 80°C but it works good. No dark screen, no 0 CPUs downclocking. So far it's fine for me, maybe I get squeeze even more out of it.
Delvius said:
Update:
I made my own modifications to the thermal engine. It is pretty bad for battery I guess but I had a very good expierence playing Pokemon Go with it today. Yes the phone gets hot. Like it doesn't drop below 70°C while playing and regulary hits 80°C but it works good. No dark screen, no 0 CPUs downclocking. So far it's fine for me, maybe I get squeeze even more out of it.
Click to expand...
Click to collapse
Done any other modifications to your file for a while? Or is it working good for you now? What's your SoT?
bjowol said:
Done any other modifications to your file for a while? Or is it working good for you now? What's your SoT?
Click to expand...
Click to collapse
Still working good for me. Not sure if I can really squeeze out more and as long as it works at the moment I do not have a good motivation to try anything else.
No idea about SoT. Always running around with a powerbank. Probably bad, it is not designed for good battery life.
Delvius said:
Still working good for me. Not sure if I can really squeeze out more and as long as it works at the moment I do not have a good motivation to try anything else.
No idea about SoT. Always running around with a powerbank. Probably bad, it is not designed for good battery life.
Click to expand...
Click to collapse
Allright thanks i might try your conf if i cant get mine to work like I want