Stuck at calibrate screen - Touch Diamond, MDA Compact IV General

After a Hardreset I had to calibrate the display but it doesn´t works, I tried it more than 20 times, and did an other Hardreset, but it´s not working.
Please Help!!!

you probably need a new digitizer
but try other roms it might work

where can I buy a new digitizer???

any other ideas???

this search should give some places you can look for a digitizer
http://www.google.com/search?source...tizer&meta=lr=&aq=f&aqi=g10&aql=&oq=&gs_rfai=

I switched the hole display but it hasn´t worked

Are you sure its not the ROM youre using that stucks? Try another ROM and MTTY before you flash it.

After switching the rom again and trying it more than 100 times suddenly it worked, but the display is still not calibrated. I have to tap higher. Does anybody have an idea??

Related

my diamond is crazy!!! Help!!!!

from several days ago whem i touch in diamond icons never select the one i touch!!!... It selects the icon on left or right but never the right one....
When i have a phone call i select the green icon and it turns the phone off
What can i do?
I aligned the screen thousands of times, i installed the different calibrators and nothing.
I align screen, it works well for a few seconds and becomes crazy again. I soft reset, a tried everything i remember and always the same.....
Obvious question: Did you Hard Reset?
Try a hard reset.
If that doesnt work then it sounds like the screen is screwed, get the unit swapped.
I've just installed a new rom! I think i have to swapp the unit
The problems are the same. Anything more i can do??
If you just installed a new ROM, did you do a hard reset? To me it sounds as if the calibration for the touch sensor is off. The first thing that you do after a hard reset is calibrate the screen.
So you can try to calibrate the screen, bofore doing the hard-reset.
You can but when you hard reset you just have to do it again
Also, you could check your local optician for any additional problems.
No, but honestly, a hardreset and recalibration should fix the problem. I'm aware that GNes/GSen can give some problems if it thinks it has rotated the screen, but I've never seen that occur outside programs that don't rotate the screen by themselves.
If that doesn't work, Sync it, back it up, whatever you want to do, possibly flash to stock and return it to whereever you bought it/HTC to get it swapped.
thank's everybody... I tried it all and the same. Going to swapp
have the same problem.. it wasn't there before, had the phone for 3 month.. i think it has to do with water under the screen, used it in the rain and then it began to behave this way (due to the big speaker hole maybe?) , it works fine otherwise! Any idea how to fix it? waterdamage? - guarantee or what?
I think it´s wierd if you can´t use it when it´s raining..?
joel78 said:
I think it´s wierd if you can´t use it when it´s raining..?
Click to expand...
Click to collapse
How many phones can be used risk free in rain?
i don't think that's the problem. no water in my phone, rain or other....
i think it started after gsen installed...may be wrong, or else or.....
Very little chance Gsen having anything to do with it. Many people are using that (including me) with no ill effects.
Hmmm, I though I was the only one with this problem. I'm on the second unit now, the first one always do soft reset by itself after every few wake up. Now the alignment always gone off after few minutes of use. I'm waiting for the replacement unit now.
Initially I thought it was because of the ROM update I did, but even after I restore the original ROM, it still happen.
Looks like I'm quite unlucky with the Diamond .
problem solved!!!!
gone to look for assistance.
After 3.30 hours new touch screen and they sad to me new components inside.
For now all good. Till when??....
hope it was the last problem
So its a guarantee issue? - bad components inside?
It still works ok, so i wait to send it away..
till now all ok.

Problem ,, When I turn on my Diamond it gives me a black screen and cant do anything?

Problem ,, When I turn on my Diamond it gives me a black screen and cant do anything?
Suddenly I turned on my Diamond it gives me a black screen and cant do anything ,, so any advices plz ??
Best Regards,
MsA
MsA89 said:
Problem ,, When I turn on my Diamond it gives me a black screen and cant do anything?
Suddenly I turned on my Diamond it gives me a black screen and cant do anything ,, so any advices plz ??
Best Regards,
MsA
Click to expand...
Click to collapse
Hi Msa!
Going back to your question...have you already tried a soft reset? Have you maybe installed any apps recently? you might want to uninstall those apps which could cause the fault....maybe you upgraded your ROM/Radio recently?? Try a fresh install if your problem persists..
Please tell us a little bit more....be more specific.....
Good luck mate
Kind regards
Jeroen
If none of that works (soft reset etc) you might have to do a hard reset and lose everything.
What have you done on it recently?
At what point does the black screen come on? Do you get rom info etc at the beginning?
I had the same problem
I had the same problem, I sent my phone to htc they replaced my mother board and sub board.
I think It's a well known problem and htc knows but will not recall.
Tal
if ur gonna send it back, make sure u have restored the original ROM and SPL.
Thanks Guyzs,,
All I have done is, I downloaded the latest ROm from the HTC website and the phone worked good, suddenly the screen turned black
I have tried everything to do rest (soft n hard) but the problem it when I turn on the device I cant see anything ALL BLACK, not even the first screen and when i tried to connected to the PC I couldnt run the hard reset as well cuz it says he HTC is not connected
???
Best Regrds
black screen no response
I had same problem a few times,what you have to do is take the battery out of the phone for a few seconds,and then replace it.You should be able to switch it on and it should reboot up,at least mine does.Im thinking about having it replaced,because it has goes dead with a black screen a few times and nothing works till i do the above action
ok
Thanks,
I have done that as well,, nothing works :S
thats is so baad
Is your battery fully charged..?
I encountered this once and after leaving the phone on charge for say 30 minutes, everything was back to normal. Sice you say you have upgraded ROM and all, maybe your battery is completely drained.
Hope it helps.
hey,
yea it could be from the battery
Important !!!
I resolve my problem, previously that WIFI not work. I disassamble an assamble HTC Touch Diamond and it begin work. Problem was in connectors and cables, try remove it and place again to your place. All work, WIFI, BT, GPS, Phone ......(Sorry for my english).
I have thys same problems and I most replase the motherboard

Touchscreen do not work anymore... but why?

Hello guys,
I have a big problem! My Diamond do not work anymore. I have used a rom for some weeks and by now, the touchscreen doesen't work. But why? Today, I was wondering, that the TouchFlow 3D got problems. When I use the touchscreen, I couldn't use the touchflow. Everytime, it scrolls the clock down and up (like using the sense). the only way was to use the hard buttons.
Then I decided to make a hard reset. and now, its not possible to get through the touch calibration screen. nothing will happen. what can i do?
please help me!
Have you tried another rom ?
I am experiencing the same problem with my diamond!
and I have read in another thread that it could be due to malfunction of the digitizer installed on top of the lcd screen
http://forum.xda-developers.com/showthread.php?t=411386
I have tried flashing with another rom, but still no luck
so I have decided to order a brand new LCD+digitizer kit from ebay and try to get this fixed my own
wish me good luck
here is the link the the ebay page
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=170398900029&fromMakeTrack=true&ssPageName=VIP:watchlink:top:en

touch screen does not work at all

Hello. Yesterday morning when i woke up suddenly my touch screen did not respond any more. I try reinstalling windows or hard reset but now i can not even get over tap the screen.Please help me. You already helped me once when i was going to throw it away because i thought it's a hardware problem and it was a software one.
What you need to do is fully charge the phone, run a backup usin PPM or sprite then do a soft reset and leave it for a day, if that doesnt workt hen run a hard reset and it will fix it, been through that problem too a couple times and it ends up workin fine
Thank you
Thanks a lot. but please tell me when you say to leave it for a day i should leave it with baterry in or out. Or do you mean to do the soft reset and leave it for a day to the screen where it sais to tap the screen. And by a day you mean 24h?Thanks again anyway
Ok.But where can i find a new lcd? And how much is it one?
I did the soft reset and leave it for a day then it worked but when i wanted to charge, it happened again and i have the same problem now.Any way a thing it's certain it is a software problem.If you have other advice please help.
another problem
I tried installing lots of roms hoping it will be fine. but now i installed a 6.1 version of wm and when i try installing wm 6.5 it stopes in loading screen and the pc gives me an error conection.What about this?
i flash the ori rom n change lcd n ribbon but still cant do the alignment on touch screen n get into the menu try the board n put it in another p4550 still cant touch screen,is it board problem ?
i have the same problem
i think its a hard problem i try everything but nothing
Hello I had the same problem.
I installed several versions of Android and nbh files.
The problem occurred with versions nbh for Froy version of Android.
As I had saved the versions that were tested. I tried to install previous versions where I knew the touchscreen worked correctly. In my tests with this file to the touch screen work again: kaisimg-panel2-320-24-05-10.nbh
I hope that helped
I had prob woth touch screen and non functional front camera. Restored function by replacing flex cable. This flex cable has the buttons for the keypad as well as supporting the front camera. When I examined the flex cable, the portion that moves in and out when sliding the keyboard appears to be slightly damaged on right and left sides. The damaged portion does contain very thin circuits.
Not sure why this was posted in Accessories but I'll move it to General for you.

htc tytn II touch screen doesn't work.

Hi all
I have problems with the TyTN II touch screen works when i start but after few minutes it no longer works
worked well but I found it like that I ran off the battery and after i powerd teh device the touch screen wooden't work
i fash it again and it worked fin for a few minutes and after it don't
i have hard reset the pda but with no succes
please help me
Screen Problem also
that's my problem too haizt! is there anyone can help us with this problem?
Have you tried another battery and see if that is the problem?
yes I tried
is the same the thing is that after I installed the new ROM works well and after a few minutes dosen't work at all
please give me a solution
please help
i realy need the phone
please help
blu_bugsy said:
please help
Click to expand...
Click to collapse
Did you hard reset your device? Try that and see if that can solve your problem.
yes i did that but nothing happened
after i install the new ROM the touchscreen works for a few minutes then it's dead.i tried to install the hard spl but it keeps disconnecting.
please give me a solution
i'm dead without my phone my work depends on it
please give me a solution
i'm dead without my phone my work depends on it
blu_bugsy said:
please give me a solution
i'm dead without my phone my work depends on it
Click to expand...
Click to collapse
Have you even check if your sim door lock...is ok?. Can you get into bootloader and flash another rom.
I have the feeling your problem is hardware r u still in warranty?
please help
yes its locked
yes i can but it keeps disconecting when screen loading starts
the original rom iti instaling fine butthe hard spl its keeps disconeting and not finising the instalation process
if iti a hard problem how its work fin when i instal new rom and if it stays closed it work when i power on for a few minutes i dont think its hard problem but i dont know what to say
it's not in warranty
i really dont know it happend with him it worked perfect in one night i runn out of baterry and in the morning i find it in the welcome windows screen tab screen to continue and after that it stop working i dont really know what could happend
i will not give up until i have a solution for my problem
please help me
Still sounds like the battery to me.
Did you try a new, fully charged battery ?
blu_bugsy said:
yes its locked
yes i can but it keeps disconecting when screen loading starts
the original rom iti instaling fine butthe hard spl its keeps disconeting and not finising the instalation process
if iti a hard problem how its work fin when i instal new rom and if it stays closed it work when i power on for a few minutes i dont think its hard problem but i dont know what to say
it's not in warranty
i really dont know it happend with him it worked perfect in one night i runn out of baterry and in the morning i find it in the welcome windows screen tab screen to continue and after that it stop working i dont really know what could happend
Click to expand...
Click to collapse
Are you sure you are following this to flash your phone or hardspl? http://forum.xda-developers.com/showthread.php?t=433835
i have bought a new battery but noting happend still not working
i have read the post a thousand times i had followed every step but it still disconnecting when the loading screen at 0% appears
i think i a need a new touch screen but in romania i can't find something like that
please help me i really need the phone
blu_bugsy said:
i have bought a new battery but noting happend still not working
i have read the post a thousand times i had followed every step but it still disconnecting when the loading screen at 0% appears
i think i a need a new touch screen but in romania i can't find something like that
please help me i really need the phone
Click to expand...
Click to collapse
If you are getting stuck at 0% maybe you had a wrong hardslp flash. Read these threads, they are experiencing about your problem http://forum.xda-developers.com/showthread.php?t=433835&page=52
Hi
I have also problem with touch scree, about couple of weeks ago it started not to aim very well (eg. i touch the place and the responce was about 5mm in the other place) but i was recalibrating my screen and for a few days it was working fine, than another calibration and another, after that that was a time when it started not to work at all for for eg. 2 days, than it worked for a while and now it's not working for about 3 weeks.
I need to change whole lcd + digitizer or just digitizer (how to check it?). Should i change it by myself (i don't have those little screwdrivers) or take it to professional service (but they usually say they won't do it whith parts from ebay bcs they'r not original.
Please help

Categories

Resources