htc tytn II touch screen doesn't work. - Tilt, TyTN II, MDA Vario III General

Hi all
I have problems with the TyTN II touch screen works when i start but after few minutes it no longer works
worked well but I found it like that I ran off the battery and after i powerd teh device the touch screen wooden't work
i fash it again and it worked fin for a few minutes and after it don't
i have hard reset the pda but with no succes
please help me

Screen Problem also
that's my problem too haizt! is there anyone can help us with this problem?

Have you tried another battery and see if that is the problem?

yes I tried
is the same the thing is that after I installed the new ROM works well and after a few minutes dosen't work at all
please give me a solution

please help
i realy need the phone

please help

blu_bugsy said:
please help
Click to expand...
Click to collapse
Did you hard reset your device? Try that and see if that can solve your problem.

yes i did that but nothing happened
after i install the new ROM the touchscreen works for a few minutes then it's dead.i tried to install the hard spl but it keeps disconnecting.
please give me a solution
i'm dead without my phone my work depends on it

please give me a solution
i'm dead without my phone my work depends on it

blu_bugsy said:
please give me a solution
i'm dead without my phone my work depends on it
Click to expand...
Click to collapse
Have you even check if your sim door lock...is ok?. Can you get into bootloader and flash another rom.
I have the feeling your problem is hardware r u still in warranty?

please help
yes its locked
yes i can but it keeps disconecting when screen loading starts
the original rom iti instaling fine butthe hard spl its keeps disconeting and not finising the instalation process
if iti a hard problem how its work fin when i instal new rom and if it stays closed it work when i power on for a few minutes i dont think its hard problem but i dont know what to say
it's not in warranty
i really dont know it happend with him it worked perfect in one night i runn out of baterry and in the morning i find it in the welcome windows screen tab screen to continue and after that it stop working i dont really know what could happend

i will not give up until i have a solution for my problem
please help me

Still sounds like the battery to me.
Did you try a new, fully charged battery ?

blu_bugsy said:
yes its locked
yes i can but it keeps disconecting when screen loading starts
the original rom iti instaling fine butthe hard spl its keeps disconeting and not finising the instalation process
if iti a hard problem how its work fin when i instal new rom and if it stays closed it work when i power on for a few minutes i dont think its hard problem but i dont know what to say
it's not in warranty
i really dont know it happend with him it worked perfect in one night i runn out of baterry and in the morning i find it in the welcome windows screen tab screen to continue and after that it stop working i dont really know what could happend
Click to expand...
Click to collapse
Are you sure you are following this to flash your phone or hardspl? http://forum.xda-developers.com/showthread.php?t=433835

i have bought a new battery but noting happend still not working
i have read the post a thousand times i had followed every step but it still disconnecting when the loading screen at 0% appears
i think i a need a new touch screen but in romania i can't find something like that
please help me i really need the phone

blu_bugsy said:
i have bought a new battery but noting happend still not working
i have read the post a thousand times i had followed every step but it still disconnecting when the loading screen at 0% appears
i think i a need a new touch screen but in romania i can't find something like that
please help me i really need the phone
Click to expand...
Click to collapse
If you are getting stuck at 0% maybe you had a wrong hardslp flash. Read these threads, they are experiencing about your problem http://forum.xda-developers.com/showthread.php?t=433835&page=52

Hi
I have also problem with touch scree, about couple of weeks ago it started not to aim very well (eg. i touch the place and the responce was about 5mm in the other place) but i was recalibrating my screen and for a few days it was working fine, than another calibration and another, after that that was a time when it started not to work at all for for eg. 2 days, than it worked for a while and now it's not working for about 3 weeks.
I need to change whole lcd + digitizer or just digitizer (how to check it?). Should i change it by myself (i don't have those little screwdrivers) or take it to professional service (but they usually say they won't do it whith parts from ebay bcs they'r not original.
Please help

Related

my diamond is dead

Hi guys,
my phone is dead after i ran a diamond unlocker software from some other site...
its not getting power on..i tried doing hard reset but no luck...
please help me guys my diamond is bricked.
how to repair it as it is not getting power on...
ironmaidon said:
Hi guys,
my phone is dead after i ran a diamond unlocker software from some other site...
its not getting power on..i tried doing hard reset but no luck...
please help me guys my diamond is bricked.
how to repair it as it is not getting power on...
Click to expand...
Click to collapse
Since we have no idea what this "unlocker software from some other site" does, you better ask the guys at "some other site"..
Hello.
I also have this problem.. Did some one have a answer to this problem?
I made a search and find more people with this problem, but still with the problem..
http://forum.xda-developers.com/showthread.php?t=440198&highlight=Diamond+Unlocker+bricked
http://forum.xda-developers.com/showthread.php?t=454342&highlight=Diamond+Unlocker+bricked
http://forum.xda-developers.com/showthread.php?t=509855&highlight=bricked
I try to unlock diamond gsm with Diamond Unlocker.exe that is to use with CDMA version
I hit Next, Next, Next until it got to progress bar it stayed on 0% then jumped to 100% and said that my device wasn't compatible or something like that, at that point the image on the diamond faded to black screen. I already try to boot in 3 colour menu but nothing happens(volume down+power+reset)..
When I plug it to pc nothing happens
does any one have any idea?
Best regards.

Diamond powers off on its own...

Hi all,
I searched everywhere here but could not fnd any suitable answer...
Here's my problem:
My brand new Touch Diamond regularly shuts off, I mean it powers itself off on its own after three to four days of use, even if the battery is fully loaded...
After that, most of the times, I have to take the battery out then replace it, otherwise it won't start. Sometimes, a soft reset would do the trick.
A great lack of reliability, since you actually don't know when you phone has powered off... I let you iamgine how many missed calls I've been through...
Any suggestion, I mean except for a hard reset ? Faulty battery? WM 6.1 malfunction?
I have no running apps in the background, it is not plugged to USB or anything. It just cuts power and stays like that...
Thanks for any input,
Cheers from South of France!
I can't help you but i have the same problem sometimes. It just turns off and won't turn on by pressing the power button again. To get back to normal i also have to take out the battery!
BTW that phone is pretty buggy anyway. i really hope there is gonna be an update by htc real soon.
I seem to have the same problem. Has anyone of you found a solution or course?
I have to do a battery pull to restart the mda compact 4. It happens 10 times a day.
BTW: I have a T-Mobile MDA compact IV
frank-12move said:
I seem to have the same problem. Has anyone of you found a solution or course?
I have to do a battery pull to restart the mda compact 4. It happens 10 times a day.
Click to expand...
Click to collapse
you have to hard reset the device and reflash with the official ROM
Hakim Rahman said:
you have to hard reset the device and reflash with the official ROM
Click to expand...
Click to collapse
Hi, Hakim Rahman,
You´re wrong. There is no solution for this problem. I´m searching almost 2 years for help. My touch diamond was in guarantee when the problem appears. I returned the phone back, but the guys from the service said, the phone have been wet, although it was always dry in my pocket...
What should I say, HTC is the worst producer of pocket PCs, that´s all.
Actually I´ve already tried another ROMs...
problem seems to be solved
I have done a HARD reset on the phone 4 days ago. It seems to be stable now.
I had a Manilla skin installed as well as a prog that used the built-in gyroscope. Perhaps those were unstable...
Now they have been erased and the phone is back into its original configuration.
dodo_pv said:
Hi, Hakim Rahman,
You´re wrong. There is no solution for this problem. I´m searching almost 2 years for help. My touch diamond was in guarantee when the problem appears. I returned the phone back, but the guys from the service said, the phone have been wet, although it was always dry in my pocket...
What should I say, HTC is the worst producer of pocket PCs, that´s all.
Actually I´ve already tried another ROMs...
Click to expand...
Click to collapse
I think the mistake lies in yourself the less really understand the problems on the device....

Problem ,, When I turn on my Diamond it gives me a black screen and cant do anything?

Problem ,, When I turn on my Diamond it gives me a black screen and cant do anything?
Suddenly I turned on my Diamond it gives me a black screen and cant do anything ,, so any advices plz ??
Best Regards,
MsA
MsA89 said:
Problem ,, When I turn on my Diamond it gives me a black screen and cant do anything?
Suddenly I turned on my Diamond it gives me a black screen and cant do anything ,, so any advices plz ??
Best Regards,
MsA
Click to expand...
Click to collapse
Hi Msa!
Going back to your question...have you already tried a soft reset? Have you maybe installed any apps recently? you might want to uninstall those apps which could cause the fault....maybe you upgraded your ROM/Radio recently?? Try a fresh install if your problem persists..
Please tell us a little bit more....be more specific.....
Good luck mate
Kind regards
Jeroen
If none of that works (soft reset etc) you might have to do a hard reset and lose everything.
What have you done on it recently?
At what point does the black screen come on? Do you get rom info etc at the beginning?
I had the same problem
I had the same problem, I sent my phone to htc they replaced my mother board and sub board.
I think It's a well known problem and htc knows but will not recall.
Tal
if ur gonna send it back, make sure u have restored the original ROM and SPL.
Thanks Guyzs,,
All I have done is, I downloaded the latest ROm from the HTC website and the phone worked good, suddenly the screen turned black
I have tried everything to do rest (soft n hard) but the problem it when I turn on the device I cant see anything ALL BLACK, not even the first screen and when i tried to connected to the PC I couldnt run the hard reset as well cuz it says he HTC is not connected
???
Best Regrds
black screen no response
I had same problem a few times,what you have to do is take the battery out of the phone for a few seconds,and then replace it.You should be able to switch it on and it should reboot up,at least mine does.Im thinking about having it replaced,because it has goes dead with a black screen a few times and nothing works till i do the above action
ok
Thanks,
I have done that as well,, nothing works :S
thats is so baad
Is your battery fully charged..?
I encountered this once and after leaving the phone on charge for say 30 minutes, everything was back to normal. Sice you say you have upgraded ROM and all, maybe your battery is completely drained.
Hope it helps.
hey,
yea it could be from the battery
Important !!!
I resolve my problem, previously that WIFI not work. I disassamble an assamble HTC Touch Diamond and it begin work. Problem was in connectors and cables, try remove it and place again to your place. All work, WIFI, BT, GPS, Phone ......(Sorry for my english).
I have thys same problems and I most replase the motherboard

Please Help !

I got myself a big problem.Xperia is continuously restarting.It can`t be stoped.I tried factory reset but it keeps restarting.The restart happens right after the sony logo.I may got a virus or i don`t know.
If you got any ideeas please post !
Bless !
99.999999999% of wm users never had and never will get a virus on their phone
virus's have to be made specially for wm for them to work
there are 5 all more proof of concept
could be a bad rom in which case updating it could help
it could be a periodic defect piece of hardware in the x1 in which case service is required
Probably just a bad rom, did you flash it?
It dies after sony logo...Bios menu only appears for 2 second i can`t even plug the usb.
It may be something hardware (((
Thank you guys for the time.
It seems i can`t find any service to look at my xperia.I think it only needs a reinstallation of the software,but they don`t want to try.
try reflashing a new ROM via the SD card method. can you get to the tricolor screen or it still restarts?
The tri-color screen only appears for 2 seconds max.meaning I press the down volumea button and the power on and the tri-color screen appears only for 2 seconds,i can barely see the screen.
(
If you can't stay on the tricolour screen, its obviously a hardware issue. Warranty?
Yes,but for the warranty i have to go to Italy.I thought it`s only a software problem that i could fix,but it`s not isn`t it ?
Thanks for advices guys.

Stuck at calibrate screen

After a Hardreset I had to calibrate the display but it doesn´t works, I tried it more than 20 times, and did an other Hardreset, but it´s not working.
Please Help!!!
you probably need a new digitizer
but try other roms it might work
where can I buy a new digitizer???
any other ideas???
this search should give some places you can look for a digitizer
http://www.google.com/search?source...tizer&meta=lr=&aq=f&aqi=g10&aql=&oq=&gs_rfai=
I switched the hole display but it hasn´t worked
Are you sure its not the ROM youre using that stucks? Try another ROM and MTTY before you flash it.
After switching the rom again and trying it more than 100 times suddenly it worked, but the display is still not calibrated. I have to tap higher. Does anybody have an idea??

Categories

Resources