does the class of the micro sd matter to the speed of the xperia? right now im using a class 2 and it seems kind of slow.
wildseal2003 said:
does the class of the micro sd matter to the speed of the xperia? right now im using a class 2 and it seems kind of slow.
Click to expand...
Click to collapse
the speed classes [2,4,6] guarantee minimum transfer rates of at least [X]MB/sec
so the speed of X1 itself is not affected but your sd card (why should it, it's got it's own internal memory), but if you have lots of installations on it that the X1 regularly has to access it might have this effect of feeling slow
someone correct me if I'm wrong
my exp showed that the sd interface of win modile can't keep up with the speed of the fastest cards but sdreaders for pc's can
there are benchmark tools like pocketmechanics which let you test the card of the card in the winM device
Related
Could anybody tell me, why my new SD Card (Panasonic 2 GB Class 6) is much slower on my Alpine than my old SD Card (Panasonic 2 GB Class 2)? Here are the results from the SK Tools benchmark :
Class 2 Card: Read 6187 kb. Write 636 kb.
Class 6 Card: Read 729 kb. Write 481 kb.
Isn't it funny?
Perhaps I should format the SD Card properly?
Any ideas?
Thank you.
are cards empty when you check write speed?
class tells about writing speed on complitely empty cards
I tried both benchmarks, with the empty and the full card. The class 2 is much faster, especially in the write result. Unfortunally I formatted the new card on my device, with the effect that the card was become more slower. After that I formatted the card on my computer, now it's better, but nevertheless slower than the old one.
maybe it's something wrong with the card
the 2nd one is almost 10 times slower readed :/
did you check speeds on PC?
maybe PPC just can't handle with faster card
deezer said:
maybe it's something wrong with the card
the 2nd one is almost 10 times slower readed :/
did you check speeds on PC?
maybe PPC just can't handle with faster card
Click to expand...
Click to collapse
Well, that's my question. Where can I get the adequate information? How can I check the speeds?
use this
http://www.simplisoftware.com/Public/index.php?request=HdTach
Now I've found out that SD/SDHC Memory Card file systems formatted with generic operating system formatting software do not comply with the SD Memory Card specification. You need a special formatting program that complies with the SD Memory Card specification.
Because I have a Panasonic card, I took the Panasonic free SW (
link: http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html).
The benchmark results are: Nearly 14000 KB/s (read), but still 470 KB/s (write) only.
No idea, how to increase the write performance.
Hi all,
I have a SDHC 8gb (Class 4). I tested its speed with J-benchmark. Frequent test shows that the write speed of this SD isn't any better than class 2 sd card i used before(4 gb).
I usually get write speed of 1.5mb/s and read speed of 2.5mb/s. Today I decided to change the buffer size to 8kb and got 4mb/s write speed. This is what a class 4 card should normally hit right?
So, I'd like to know if there's any way i can increase the buffer speed while transfering files from my PC. I'm really having a hard time copying movie files to my sd card. Files transfer of larger than 100mb take ages and even get disrupted at times.
Thanks for the help!!!
pradeepkc said:
Hi all,
I have a SDHC 8gb (Class 4). I tested its speed with J-benchmark. Frequent test shows that the write speed of this SD isn't any better than class 2 sd card i used before(4 gb).
I usually get write speed of 1.5mb/s and read speed of 2.5mb/s. Today I decided to change the buffer size to 8kb and got 4mb/s write speed. This is what a class 4 card should normally hit right?
So, I'd like to know if there's any way i can increase the buffer speed while transfering files from my PC. I'm really having a hard time copying movie files to my sd card. Files transfer of larger than 100mb take ages and even get disrupted at times.
Thanks for the help!!!
Click to expand...
Click to collapse
Random no-name brand? No surprise.. Lots of cheap, slow, unstable storage cards out there these days.
J-Benchmark isn't of much use if you don't know what the real workd transfer speed is, so you might want to try testing it against the computer... Send a large file, time it, see how long before you can safely remove the device.
khaytsus said:
Random no-name brand? No surprise.. Lots of cheap, slow, unstable storage cards out there these days.
J-Benchmark isn't of much use if you don't know what the real workd transfer speed is, so you might want to try testing it against the computer... Send a large file, time it, see how long before you can safely remove the device.
Click to expand...
Click to collapse
well, it says transcend but i'm doubtful. Bought it at very cheap price from a wholesale market.
But there's something I've noticed, the transfer speed is slow through usb only...if i unmount the card and use it through a normal card reader its quite fast...I tried sending a 800mb movie file and it took just above 4 mins....
So, I don't think its the card that's the culprit. puzzled!!! could it be the rom i'm using or froyo itself?
I'm sorry that I can't be of any help, but i got the exact same problem. Bought a 16gb card, kingston brand, class4 (don't expect that much of it, but the stock was class 2, so i figured that it would be ok..)
I get horrible write speed, around 200-250 kb/s (or whatever it's called). Don't remember what the old one did, but it wasn't that bad.
I've plugged the card directly into the PC, and it gets much higher speeds..
Exactly the same problem, as u guys..
Come on, an hour to copy a movie to the phone, that's just not acceptable!
PS: have you tried this?
Mine was allready at 128, but it's probably worth a shot..
http://forum.xda-developers.com/showthread.php?t=921530
Hope anyone has some solutions to this, it's just seriously annoying
Oh, and i've got the desire with cm7 on it, it's not that different from the n1..
It's the phone not the cards. It just doesn't appear able to acheive transfer speeds higher than you'd get with a Class 2 SD card.
In the link i posted, there was a guy who found out a way around the limits of android on a EVO 4g device. I was hoping for a similar fix.. Or just something
Bought a Class 10 Kingmax and disappointed that write speeds are still maxing at 1.5 MBps Waste of money
2.5Mbps in recovery.
SOOOOOO SLOW copying videos over yaaawn.
Using a card reader means switching off the phone, which is not really an option IMHO.
You can benefit from the faster rated cards if you use a card reader, and even better if you buy a second card so that you can load up one while using the other. Quick swap, job done!
I have a Transcent 8GB class 6. I get speeds from 6mb/s-8mb/s.
I have a Kingston 8gb class 4 card. In my old HTC Hero I was getting reads of 20mb/s and wright up to 10mb/s. Now in my N1 it's much slower. Getting 8mb/s read and 3mb/s wright. I allready formatted but with no result.
What can be the problem?
Maybe buy another micro sd (class 6-10)? any recommendations?
Save your money. The N1 has slow transfer rates no matter what card you use. It seems to be an inherent flaw with the device.
It's because you have many transfer in back ground
No problem
I test my SD after wipe: read 100mg
But before that: read 6mg
Because I has 340 app on SD
Ok i finally bought micro sd card for my galaxy s. But a problem came up. When im transfering via USB Cable, transfer rate is barely 4mbit/s and when I put it in SDHC adapter and into my laptop card reader, i got transfer rate of 19mbit/s and read speed of 22mbit/s
My question is, can anyone explain to me why is it so slow over usb cable?
Just to mention, I already tested on mobile with mobile software and i got same results as with SDHC adapter and card reader....
Have you tried to put the USB-mode into Mass Storsge mode. Settings->Wireless and Network ->USB Settings ->Mass storage. This mode will only show the internal memory and the SD Card in Windows explorer. I think it is also much faster.
Yup, i tried only on that way tbh and transfer rate is still max 4mbps, and in sdcard 19.47
Weird thing is that i know that i got original card, its not scam, i ordered it from official supplier in my country...
bump anyone
I'm sure I read on a thread somewhere that the phone can't use the speed of a class
10 card and you don't get any faster speeds than a class 4, would like to know the facts on this
Sent using geek power
gsw5700 said:
I'm sure I read on a thread somewhere that the phone can't use the speed of a class
10 card and you don't get any faster speeds than a class 4, would like to know the facts on this
Click to expand...
Click to collapse
Get a free sdcard tester in the market and test it by yourself. I would be really surprised if a i9000 could do above class 6 even after tweaking readahead and buffers.
I tested it with SD Tools and got these results
Mine is meant to be a class 10, not very good result if it is:
I got this result with a Class 2 SanDisk:
View attachment 690542
I know it has been asked a lot in the past, but searching didn't provide Milestone specific answer.
So If I buy Class 6 or Class 10, will the milestone be able to utilize the full write speed? I am running Cyanogenmod 7 RC0 (latest). At the moment I have 8GB class 4 Apacer microSD and tbh its a terrible card. All I get is 2.5 mb/s write on large files, but I am getting the same speed when the card is in card reader too so its not phone issue.
Thanks.
Maybe I'm wrong, but what I know is that the card class is the limit. It doesn't mean it will read/write at full speed all the time.
How are you testing your speeds?
Maybe SD Speed Increase help you.
https://play.google.com/store/apps/...t=W251bGwsMSwxLDEsImNvbS5zZGluY3JlYXNlLml0Il0.
I don't know how to test my speeds, but were getting 24mb/s read and 8mb/s write speeds in SD Tools ( https://play.google.com/store/apps/...1bGwsMSwxLDEsImFsZXMudmVsdXNjZWsuc2R0b29scyJd ). I'm using a Samsung 16gb Class2. I think the app is not calculating very well. Don't know.
I am using the SD card as USB mass storage instead of carrying separate thumb drive. I transfer a lot of large 1+ GB files.
I tried SD Speed increase last week and it does make a difference on smaller files, but when copying 2GB files it seems to start fast (like a burst mode), but if timed it takes exactly the same time to write something on the card.
I am going to change my 8GB card for 16GB today anyway I just wondered if class 10 is worth getting or should I get class 6 and save some money. Whatever I buy I will report back and test the speed.
I went ahead and bought Patriot LX 16 GB class 10 microSD. Now I get variable speeds from 3.5 mb/s to 8 mb/s depending on the file sizes. As I read somewhere this is due to fact that the phone is using MTP protocol to act as mass storage device.
Anyway with the old card I was topping only 2.5 mb/s no matter the file size, so it's definitely an upgrade and since class 6 was only 5$ cheaper I saw no reason not to buy the faster one, even if the milestone can't utilize its full capability. In the end its an old phone and I believe there weren't any class 10 cards out in 2009 anyway.
And one more thing, the camcorder isnt lagging anymore when recording videos
EDIT: After booting in recovery and clearing dalvik and cache partition I am getting 9.5 + mb/s, but it does start around 4.5 mb/s and then rises to its full speed. Cheers.
Except for the improvements in video recording, is there anything else that runs smoother for you when using the phone?
maango said:
Except for the improvements in video recording, is there anything else that runs smoother for you when using the phone?
Click to expand...
Click to collapse
I think everytime any app need to access your sd, it will be smoother, like gallery, taking photos, loading maps cached in sd, music apps indexing songs, etc. Accessing apps installed on sd card may be loaded faster too.
extrem0 said:
I think everytime any app need to access your sd, it will be smoother, like gallery, taking photos, loading maps cached in sd, music apps indexing songs, etc. Accessing apps installed on sd card may be loaded faster too.
Click to expand...
Click to collapse
Thats right. Gallery loads faster, applications and games moved to SD start up faster etc. Don't know about maps, but I suppose they cache faster too.
However the main difference is when copying stuff to phone in mass storage mode. Thats why I got a higher class card in first place. While all other stuff related to reading from SD do seem snappier, the difference is not all that great since even Class 2 cards can read with high speed, but when it comes to apps that are writing the difference is obvious.
I'm using a Samsung Essentials 32GB Class 10 Card.
Gave me some troubles at first, something with sector sizes seemed wrong - but after formatting it with this tool https://www.sdcard.org/downloads/formatter_3/ it worked.
Someone in these forums suggested the tools - search for the link to find the recommended settings.
Alright, thx for the answer. For someone not using the phone the same way as you, do you think it would be worth the money to get a faster card?
Sent from my Milestone using XDA
The difference between class 6 and class 10 right now is only few bucks. I don't see why not. You never know, may come in handy.
Here check this out, less then 1$ difference in price.
16GB microSDHC CARD Class 6 - Transcend
16GB microSDHC CARD Class 10 - Transcend
I wouldn't go below class 6 since the camera is lagging when recording videos.
Is it true that if a formatted microSD often will make it slow microSD?
It' unlikely, but possible.
My Samsung Essentials 32GB Class 10 card gave my Milestone hiccups at first (rebooted several times when powering on, rebooted every time I left USB mass storage mode) so I re-formatted it using these instructions: http://forum.xda-developers.com/showpost.php?p=23494134&postcount=7417
Now everything works fine and I still get a little more than 10MB/s when copying movies via USB - so no loss here.