I was trying to get the dream on my phone and I think I just ruined my phone? when I turn it on it just goes straight to the system recovery page and it wont turn on, i also can get the boot loader page to come up but that is it!! is there anything I can do to reset my phone and get it working????????????
thank you for the comments and help!!
samanthamaresh said:
I was trying to get the dream on my phone and I think I just ruined my phone? when I turn it on it just goes straight to the system recovery page and it wont turn on, i also can get the boot loader page to come up but that is it!! is there anything I can do to reset my phone and get it working????????????
thank you for the comments and help!!
Click to expand...
Click to collapse
install a custom rom and it should boot up
What recovery do you have installed?
If you can get into the bootloader then there is always an easy way out to fixing the phone. Starting from square one with the Root process found in many root guides. Use the "Search" link.
I have drea100 put 32b
radio 2.22.19.261
Related
Hey guy, my g1 is stuck at startup and I can restart by clicking send menu power, and i can go to fastboot, but I can't enter recovery any help is appreciated, I can't find it anywhere on the forums. Thanks.
http://www.google.com/search?client...oot+commands&sourceid=opera&ie=utf-8&oe=utf-8
yea i tried to fastboot but i cant get my computer to read my phone it doesn't come up on adb or fastboot i did the <enter>setprop persist.service.adb.enable 1<enter> on the g1 screen but that didn't help either
So i found a couple threads that has helped me
http://forum.xda-developers.com/showthread.php?t=574098&highlight=fastboot
http://forum.xda-developers.com/showthread.php?t=512319
The only problem now is my computer doesn't read my G1. I have the danger spl (1.33.2005) i think
The reason I can't get past the g1 screen is because i forgot to include the rom onto the sdcard before i flashed the radio and spl.
I hope this is enough information for someone to help me
Try a differant driver. The one in sdk1.6 gave me trouble when using fastboot w/ 1.33.2005 spl. Try the one from here it should work.
Once you get that working, just flash a new recovery image. Don't forget to press back to switch to "usb" instead of "serial".
Long story short, I've received this ADP1 from a friend, this ADP1 will only boot into a SPL mode when you turn it on.
But at the time, it still has the ability to boot into a fastboot mode, so I mount the RA1.5.2 recovery img to see if it will take CY rom, it successful booted into the recovery mode, and flash the new radio, 1.6 rom along with the CY rom no problem, but when reboots, still goes into the SPL mode.
So here comes the stupidest move...
I've accidentally flash the NBH file(RC29), and was hoping to have a fully restore the phone, but it didn't, and made it worst, now, it still goes to the SPL mode when you turn it on, and now, I lost the ability to access the fastboot mode, and recovery mode only shows the icon, nothing else.
I would like anyone's advise, anything I can try?
Appreciate your help!
Hmm that's a very odd situation. Without being able to boot the phone after flashing RC29 you have no way to gain root again. Sorry to say it but I think you have a semi-unrecoverable-brick :-/
I basically flashed CWM's (clockwork mod) recovery screen from the application on my G1 running the latest Cyanogen Mod Rom (6.0) becuase i thought it was very practical and i needed a new recovery screen. I knew not that it would lock my phone and I now can't access the recovery screen nor will it start up. It won't even reach the nice splash screen that was put in the rom by the nice folks at CM. It solely is stuck in a boot loop with the factory splash screen. The one thing i can access is the fastboot screen. I've downloaded androids SDK and put it on the root of my Windows Vista computer and now i know not what to do. Anyone please help because im using this old Qualcomm phone from the 90s and its horrible. Thank you so much anyone who reads this and helps in advance.
aj33zy said:
I basically flashed CWM's (clockwork mod) recovery screen from the application on my G1 running the latest Cyanogen Mod Rom (6.0) becuase i thought it was very practical and i needed a new recovery screen. I knew not that it would lock my phone and I now can't access the recovery screen nor will it start up. It won't even reach the nice splash screen that was put in the rom by the nice folks at CM. It solely is stuck in a boot loop with the factory splash screen. The one thing i can access is the fastboot screen. I've downloaded androids SDK and put it on the root of my Windows Vista computer and now i know not what to do. Anyone please help because im using this old Qualcomm phone from the 90s and its horrible. Thank you so much anyone who reads this and helps in advance.
Click to expand...
Click to collapse
just boot into fastboot and go to Amon Ra's thread in the G1 section. Just follow his fastboot instructions
UberMario said:
just boot into fastboot and go to Amon Ra's thread in the G1 section. Just follow his fastboot instructions
Click to expand...
Click to collapse
do you got a link for me? thanks
http://forum.xda-developers.com/showthread.php?t=530492
Oh and this
http://forum.xda-developers.com/forumdisplay.php?f=507
thank you very much! props to you buddy
aj33zy said:
thank you very much! props to you buddy
Click to expand...
Click to collapse
this is the G1 recovery
http://forum.xda-developers.com/showpost.php?p=4647751&postcount=1
G1 when power on comes only G1 screen, when soft reset and hard reset is the same . when update it says on screen: "E: Cant open / cache/recovery/ command" and aborting upgrade in 50%
Can anyone tell me what the hell is going on with this?
well im assuming the phone has been properly set as far as radio/spl -- i would say you need to reflash your recovery. Erase your current recovery with fastboot and then fastboot the brand new recovery into it and try again. If the phone cant boot into the rom it will try to boot into the recovery and if it cant, it does that. I think. theres a pretty nice G1 wiki here and theres also cyanogenmod wiki... cant go wrong there.
Hello everyone! I was attempting to root my HTC One on Sprint, and I successfully completed unlocking the bootloader following the instructions found on htcdev.com. The next step (correct me if im wrong) is to flash a recovery.
I attempted (using fastboot flash recovery recovery.img) to flash ClockworkMod, ClockworkMod Touch, TWRP, and even a (supposed) original recovery img. However, each time, it fails to load the recovery. What happens is the phone shows 'Booting Recovery...', then simply goes black, never to turn on.
In order to get the phone usable, I have to hold down the power button for ten seconds and then boot it back to android. Any ideas on what's causing this?
--------------
Phone Specifics:
HTC One - Sprint
Default ROM
S-On
Currently Unrooted
--------------
DonutAvenger said:
Hello everyone! I was attempting to root my HTC One on Sprint, and I successfully completed unlocking the bootloader following the instructions found on htcdev.com. The next step (correct me if im wrong) is to flash a recovery.
I attempted (using fastboot flash recovery recovery.img) to flash ClockworkMod, ClockworkMod Touch, TWRP, and even a (supposed) original recovery img. However, each time, it fails to load the recovery. What happens is the phone shows 'Booting Recovery...', then simply goes black, never to turn on.
In order to get the phone usable, I have to hold down the power button for ten seconds and then boot it back to android. Any ideas on what's causing this?
--------------
Phone Specifics:
HTC One - Sprint
Default ROM
S-On
Currently Unrooted
--------------
Click to expand...
Click to collapse
My first question are you sure it says unlocked in hboot?
have you tried the tool they made?
http://forum.xda-developers.com/showthread.php?t=2236814
Just an FYI.. You would have had more people helping if you posted in the Q/A.
budeone said:
My first question are you sure it says unlocked in hboot?
have you tried the tool they made?
http://forum.xda-developers.com/showthread.php?t=2236814
Just an FYI.. You would have had more people helping if you posted in the Q/A.
Click to expand...
Click to collapse
Yeah, I have tried Hasoon2000's tool, but no change. I wonder, would a factory reset help?
When you try to send ity does it say .. sending? and done or does it give you an error message.
Hey, turns out I had been using Hasoon's Toolkit for the One, not the One on Sprint! It installed TWRP like a charm! Thank you! I had been stuck for weeks on this!
Cool.. Glad you figured it out... have fun flashing!!