is there a way to enter boot loader and gets the 3 color screen without using the volume key, by using the keyboard instead???
my x1 has no rom so it cant be turned on and the volume key is dead.
how can i flash a Rom??????????
darkylight said:
is there a way to enter boot loader and gets the 3 color screen without using the volume key, by using the keyboard instead???
my x1 has no rom so it cant be turned on and the volume key is dead.
how can i flash a Rom??????????
Click to expand...
Click to collapse
Having no ROM installed (i.e. via Task29) does not mean the vol key method won't work. It should work - remove battery, replace battery, hold power and vol key together for a few seconds. The only reason it wouldn't is if there was something physically wrong with the key.
Jezza0 said:
Having no ROM installed (i.e. via Task29) does not mean the vol key method won't work. It should work - remove battery, replace battery, hold power and vol key together for a few seconds. The only reason it wouldn't is if there was something physically wrong with the key.
Click to expand...
Click to collapse
yup via task 29, mtty. i think there is a wrong in the volume key coz its not working any more.
is there a way to boot via keyboard or my x1 is dead?
are you sure
all you have to do is hold the vol DOWN and power until screen comes up
darkylight said:
is there a way to enter boot loader and gets the 3 color screen without using the volume key, by using the keyboard instead???
my x1 has no rom so it cant be turned on and the volume key is dead.
how can i flash a Rom??????????
Click to expand...
Click to collapse
had the same issue mate....and now my x1 is bricked!...couldn't do anything to get it back into tri-colour screen and sent it back to repair...tried to use the usb, mitty and nothing....good luck if you find another method....i hate task29 now i wouldn't try that thing again on my new phone...i did everything correctly and it just completely died on me...
has your volume key always been dead
yea, me 2, my volume key dead
so i cant do task29 before flash a new rom
i search a long time
but cant find solutions
had to send it back to repair the hardware problem
Hi
Try this this i tried might be work for you too...
Put image file in root now run Task29 and as soon as the tri colour screen comes remove the usb cable and wait for 2 minutes it will search for serial and will automatically boot from SD image..
Thanx
darkylight said:
is there a way to enter boot loader and gets the 3 color screen without using the volume key, by using the keyboard instead???
my x1 has no rom so it cant be turned on and the volume key is dead.
how can i flash a Rom??????????
Click to expand...
Click to collapse
What do you get when you just turn on your phone? You can always turn on your phone, if you have a ROM flashed it will boot the ROM. If not or not properly flashed then it will take you to the bootloader....
Lokatho said:
What do you get when you just turn on your phone? You can always turn on your phone, if you have a ROM flashed it will boot the ROM. If not or not properly flashed then it will take you to the bootloader....
Click to expand...
Click to collapse
how could your phone auto loading bootloader without a rom and volume down key press?
is your phone made from E.T ? he can do it auto intelligently
dont bull**** before u r clear the problem and situation
my words is rude ,but ur words totally leading the guy into wrong direction ,and waste our time
o0k00l said:
Hi
Try this this i tried might be work for you too...
Put image file in root now run Task29 and as soon as the tri colour screen comes remove the usb cable and wait for 2 minutes it will search for serial and will automatically boot from SD image..
Thanx
Click to expand...
Click to collapse
bull**** 2
how could he do task29 with volume key and a flashed rom ?
dont wast our time
o0k00l said:
Hi
Try this this i tried might be work for you too...
Put image file in root now run Task29 and as soon as the tri colour screen comes remove the usb cable and wait for 2 minutes it will search for serial and will automatically boot from SD image..
Thanx
Click to expand...
Click to collapse
lol.. your barking at the wrong tree man.. read & understand
don't know if this is related but i thought i'd post it still.
i had an issue with task29 once i tried it.
usually, i flash roms using activesync since i'm kinda lazy putting back and fort the x1 cover, battery and all that.
after flashing task29, my x1 went dead. what i did, i removed the sd card,
plugged it to my pc and put the kovsimg file of the rom i like best,
plugged back in the sd card with the kovsimg file and re-flash via sd card method (using soft keys & volume button).
viola! it worked! but then again, i guess that's the way it's suppose to be done anyways.
simpleguy said:
how could your phone auto loading bootloader without a rom and volume down key press?
is your phone made from E.T ? he can do it auto intelligently
dont bull**** before u r clear the problem and situation
my words is rude ,but ur words totally leading the guy into wrong direction ,and waste our time
Click to expand...
Click to collapse
Ever did a bad flash???? Try it....flash from your pc and pull the USB cable. If you reset your phone where does it take you? Certainly not to boot the ROM, because the flash went wrong.
Well.....
As the OP doesn't tell us specific details about why or how his X1 has no ROM, I'm trying to get some more info on his problem.
So keep your rude words in your mouth before you speak...!
Since when does trying to help someone wastes your time???! Dude you really need to utter your frustrations somewhere else.
simpleguy said:
bull**** 2
how could he do task29 with volume key and a flashed rom ?
dont wast our time
Click to expand...
Click to collapse
Man...you're really sour aren't you?
Lokatho said:
Ever did a bad flash???? Try it....flash from your pc and pull the USB cable. If you reset your phone where does it take you? Certainly not to boot the ROM, because the flash went wrong.
Well.....
As the OP doesn't tell us specific details about why or how his X1 has no ROM, I'm trying to get some more info on his problem.
So keep your rude words in your mouth before you speak...!
Since when does trying to help someone wastes your time???! Dude you really need to utter your frustrations somewhere else.
Man...you're really sour aren't you?
Click to expand...
Click to collapse
laugh out loudly, bull**** again
his volume key is dead, and his phone dont have rom in it
and u, smart u , tell him flash a rom ? and pull cable blah blah
is it ridiculous?
how could he into bootloader in this situation?, perhpas u r god could let it done
once again, plz clear the situation, before you answer it(read op`s post again and again , ok ?)
u guys hand-up is appreciate ,but non-sense
u just waste our time
i wont relpy anymore untill u can provide a doable solution
simpleguy said:
laugh out loudly, bull**** again
his volume key is dead, and his phone dont have rom in it
and u, smart u , tell him flash a rom ? and pull cable blah blah
is it ridiculous?
how could he into bootloader in this situation?, perhpas u r god could let it done
once again, plz clear the situation, before you answer it(read op`s post again and again , ok ?)
u guys hand-up is appreciate ,but non-sense
u just waste our time
i wont relpy anymore untill u can provide a doable solution
Click to expand...
Click to collapse
Really sad.....I pity you.
As I want to help the OP, but as helping the OP wasted you're time I'm not. As I don't want to waste your time....
djromeo said:
had the same issue mate....and now my x1 is bricked!...couldn't do anything to get it back into tri-colour screen and sent it back to repair...tried to use the usb, mitty and nothing....good luck if you find another method....i hate task29 now i wouldn't try that thing again on my new phone...i did everything correctly and it just completely died on me...
Click to expand...
Click to collapse
thanks for helping mate, i will send my phone to sonyericsson shop wish they could help me
o0k00l said:
Hi
Try this this i tried might be work for you too...
Put image file in root now run Task29 and as soon as the tri colour screen comes remove the usb cable and wait for 2 minutes it will search for serial and will automatically boot from SD image..
Thanx
Click to expand...
Click to collapse
can u send me some details and steps how to do this, i will try it
thanks
simpleguy said:
laugh out loudly, bull**** again
his volume key is dead, and his phone dont have rom in it
and u, smart u , tell him flash a rom ? and pull cable blah blah
is it ridiculous?
how could he into bootloader in this situation?, perhpas u r god could let it done
once again, plz clear the situation, before you answer it(read op`s post again and again , ok ?)
u guys hand-up is appreciate ,but non-sense
u just waste our time
i wont relpy anymore untill u can provide a doable solution
Click to expand...
Click to collapse
guys come om plz i appreciate all your kind help really am desperate and wish i could get my phone back.
yup my phone has no rom so i couldnt flash any rom coz my volume key is died. NO NEW ROM AND NO BOOTLOADER.
i guess that there is no solution other than i should sent it back to the shop to be repaired but if there is a solution i wont regret to try it on my phone.
thanks all for your help.
Hello! I had this problem a minute ago. Try this:
1 -Turn on the phone. The screen will freeze in Sony Ericsson logo.
2 - After this, hold the two silver front buttons and press the softreset button behind the battery cover (to do a Hard Reset).
3 - Follow the instructions to perform the Hard Reset.
4 - When finished, remove the battery. Wait for 3 seconds and put the battery back.
5 - Now try to hold Vol Down key and turn the phone on.
It worked for me. But OMG, this thing scared me...
Related
Hi,
I've searched alot for this kinda problem but it seems I AM the only one who has this problem.
I had succesfully installed R2AA0010 UK ROM 4 months ago using Micro SD Method, but now when i'm trying to upgrade it to R3A version the Volume Down+Power Button is not working and I can make it to tri color screen. (Just nothing happens)
I've tried SSPL Manual as well but it stops on screen "Loading..." and nothing is happening!
Please help!!!
isp_85 said:
Hi,
I've searched alot for this kinda problem but it seems I AM the only one who has this problem.
I had succesfully installed R2AA0010 UK ROM 4 months ago using Micro SD Method, but now when i'm trying to upgrade it to R3A version the Volume Down+Power Button is not working and I can make it to tri color screen. (Just nothing happens)
I've tried SSPL Manual as well but it stops on screen "Loading..." and nothing is happening!
Please help!!!
Click to expand...
Click to collapse
vol down and the press the power key and keep pressing it till u see the tricolor screen.....don stop even if ur feel the vibration!!!
agent_47 said:
vol down and the press the power key and keep pressing it till u see the tricolor screen.....don stop even if ur feel the vibration!!!
Click to expand...
Click to collapse
Yes, I did it. but no luck!
Any Idea???
try to hard reset first... then try to charge the new ROM.
wazaaappp said:
try to hard reset first... then try to charge the new ROM.
Click to expand...
Click to collapse
how to hard reset then?
EDIT: I've found how to hard reset but when i'm pressing the silver buttons they're also doing nothing. (The WM will come up normally)
I think i'm gonna lose it
You can just load the bootloader from the windows directory...
I think it is called botloader.exe
there is only 1 o... try to open that .exe bootloader should show up and you are ready to flash.
You can just load the bootloader from the windows directory...
I think it is called botloader.exe
there is only 1 o... try to open that .exe bootloader should show up and you are ready to flash.
Edit: Your topic is misleading.... you said vol down and power button doesn't work but obviously it works....
You can just load the bootloader from the windows directory...
I think it is called botloader.exe
there is only 1 o... try to open that .exe bootloader should show up and you are ready to flash.
Edit: Your topic is misleading.... you said vol down and power button doesn't work but obviously it works....
Use clear storage to hard reset....and if you are doing sd card method maybe you forgot to rename your file into kovsimg.nbh or whatever it's suppose to be
poetryrocksalot said:
You can just load the bootloader from the windows directory...
I think it is called botloader.exe
there is only 1 o... try to open that .exe bootloader should show up and you are ready to flash.
Edit: Your topic is misleading.... you said vol down and power button doesn't work but obviously it works....
Use clear storage to hard reset....and if you are doing sd card method maybe you forgot to rename your file into kovsimg.nbh or whatever it's suppose to be
Click to expand...
Click to collapse
Thanks for reply!
Yes, I can go to tricolor screen through windows but as i said it will stop at "Loading..." screen. I've read the instructions and I renamed it to kovsimg.nbh as well.
I cannot hard reset using the silver buttons but I did it with clear storage icon! but nothing changed!!!!
I think my topic is correct, I didn't mean that my vol down and power buttons are corrupted or damaged, I mean It's not working when i'm trying to flash!
Any Idea?
isp_85 said:
how to hard reset then?
EDIT: I've found how to hard reset but when i'm pressing the silver buttons they're also doing nothing. (The WM will come up normally)
I think i'm gonna lose it
Click to expand...
Click to collapse
turn off
take out battery and stylus
press silver buttons
turn on (keep pressing silver)
stylus in the hole in the back
5 secs
boot
try
wazaaappp said:
turn off
take out battery and stylus
press silver buttons
turn on (keep pressing silver)
stylus in the hole in the back
5 secs
boot
try
Click to expand...
Click to collapse
Yes, that's what I exactly did! But the normal windows will come up!
HR through settings
another way to hard reset it to go
start > settings > system tab > clear storage
then press 1234 and press yes
maybe your spl is a bit damaged cause you can't hard reset and you can't flash sspl
try flashing hspl again
to hard reset
switch off
press both silver buttons
just press power button briefly, dont hold power button.
keep pressing both silver buttons till reset screen
hope this helps.
Holy crap you guys I do not know why I triple posted...
Thanks for reply!
Yes, I can go to tricolor screen through windows but as i said it will stop at "Loading..." screen. I've read the instructions and I renamed it to kovsimg.nbh as well.
I cannot hard reset using the silver buttons but I did it with clear storage icon! but nothing changed!!!!
I think my topic is correct, I didn't mean that my vol down and power buttons are corrupted or damaged, I mean It's not working when i'm trying to flash!
Any Idea?
Click to expand...
Click to collapse
Next time you can call this screen the bootloader screen... don't call it volume down and power button because it is very misleading...
hi mate.i can tell you your x1 is dead.because my phone has exactly same problem.i took my x1 to SE service and they change my touch pad navigation panel and navigation buttons.just 2days later phone got dead again now none off my buttons are functioning.i am gonna claim new phone from them.because they also gave same crack to phone panel as well.so dont spent your time.just bring back your phone to orginal condition and send to repair.everything your stock version orginal spl and orginal rom etc...i will let you know what SE tell me.cheers
ps: people complain about crack in their case.this issue (my buttons are not working any more) is very common nowadays we must complain to SE as well.this issue needs new sticky topic.thanks
human75 said:
hi mate.i can tell you your x1 is dead.because my phone has exactly same problem.i took my x1 to SE service and they change my touch pad navigation panel and navigation buttons.just 2days later phone got dead again now none off my buttons are functioning.i am gonna claim new phone from them.because they also gave same crack to phone panel as well.so dont spent your time.just bring back your phone to orginal condition and send to repair.everything your stock version orginal spl and orginal rom etc...i will let you know what SE tell me.cheers
ps: people complain about crack in their case.this issue (my buttons are not working any more) is very common nowadays we must complain to SE as well.this issue needs new sticky topic.thanks
Click to expand...
Click to collapse
But my silver keys are working in the windows normally
i get to the bootloader screen by pressing the camera- and the powerbutton. maybe that will work for you too?!
One thing else!
I can get to the bootloader screen by runnig the SSPL Manual in windows but the phone gets stock on "Loading..." screen and nothings happening!
I don't want to loose it
isp_85 said:
One thing else!
I can get to the bootloader screen by runnig the SSPL Manual in windows but the phone gets stock on "Loading..." screen and nothings happening!
I don't want to loose it
Click to expand...
Click to collapse
U need to copy Rom which U want to upgrade to SD card. If u want cooked room so flash Hard-SPL, and then it will automatically install rom U want. or if stock Rom so flash Hard-SPL back to stocks.
Sorry, but I have a big big problem. I have an x1, and I flashed the previous version of Energy Rom on the sd card. BUT I wanted to re-flash these, and the phone blocked in initial screen..the update rom one..
So, every time I try to update, it starts and after a few second, and when it start to update, the screen turns off. Finally, anyone can help me? I don't know how I can fix this situation PLEASE, HELP ME!!
Thanks, Fabio
Remove your Micro SD-CARD, and enter in flash mode! Volume down + power on!
Open the Update Phone Utility with the rom of your choice! Remember to rename your rom to: KOVSIMG.nbh
Sorry for English.
Faffa_mcr said:
Sorry, but I have a big big problem. I have an x1, and I flashed the previous version of Energy Rom on the sd card. BUT I wanted to re-flash these, and the phone blocked in initial screen..the update rom one..
So, every time I try to update, it starts and after a few second, and when it start to update, the screen turns off. Finally, anyone can help me? I don't know how I can fix this situation PLEASE, HELP ME!!
Thanks, Fabio
Click to expand...
Click to collapse
first time u must delete first the previous version on ur sd card... than u can update the new one... and dont forget to tasks 29 before u flash the rom...
Sorry guys, but when I enter in flash mode, and I press the power button and it should load the ROM, instead it always restart after 2-3 second. I don't know what to do..please help me!!
It sounds to me that you're not holding the buttons down correctly
paul c said:
It sounds to me that you're not holding the buttons down correctly
Click to expand...
Click to collapse
I tried again, but the result is the same.. uff..
hardspl
Faffa_mcr said:
I tried again, but the result is the same.. uff..
Click to expand...
Click to collapse
1. Try to pull up the batery for 10 menute.. and replace it again.. and press volume down and the power button together and dont realese until the boot screen appear...
2. connect ur x1 with the computer and hardspl the phone with the new spl 0.78.. when its finish the phone will restart.. pull the batery again for 1 menute.. and replace again... go to bootloader screen again like i explain in point 1.. after that conect again ur x1 with computer... do task29.. when finish its will restart again...
after u do task29.. u can flash ur x1 with the computer or with storage card..
this was the link for SPL 0.78 and task29 and if u still confused... http://www.826x.blogspot.com/
i think you can't flash the energy rom and always fail.. because u not hardspl your x1..
ahmadin said:
1. Try to pull up the batery for 10 menute.. and replace it again.. and press volume down and the power button together and dont realese until the boot screen appear...
2. connect ur x1 with the computer and hardspl the phone with the new spl 0.78.. when its finish the phone will restart.. pull the batery again for 1 menute.. and replace again... go to bootloader screen again like i explain in point 1.. after that conect again ur x1 with computer... do task29.. when finish its will restart again...
after u do task29.. u can flash ur x1 with the computer or with storage card..
this was the link for SPL 0.78 and task29 and if u still confused... http://www.826x.blogspot.com/
i think you can't flash the energy rom and always fail.. because u not hardspl your x1..
Click to expand...
Click to collapse
Sorry, I tried to connect the x1 to pc..but the pc doesn't recognize the phone..
I looked that the power button have a red light, and when this turn off, it go to bootloader mode, but after few second (it's in update mode) the phone turn off..
Someone has the same problem? I don't know what to do, I'm desperate! I can't use my phone
first remove sd card.
then pull out battery, press power button without battery on phone for about 30 sec.
then place battery. try to hard reset without OS:
press and hold both softkeys of X1, and press power button to turn on phone. but don't release softkeys until appears blue text with white background. slide put keyboard press R, wait to complete then press SPACE.
phone will be hard resetted. if not helped to boot OS, or there's no OS, or you did task29 before then do another task29 after this prosedure.
hope it helps
Faffa_mcr said:
Sorry, I tried to connect the x1 to pc..but the pc doesn't recognize the phone..
Click to expand...
Click to collapse
did you try another usb port of PC?
orkhanahmadov said:
did you try another usb port of PC?
Click to expand...
Click to collapse
mmm no...but I think that's another problem, coz when I put the phone on ac mode, it's the same situation...
orkhanahmadov said:
first remove sd card.
then pull out battery, press power button without battery on phone for about 30 sec.
then place battery. try to hard reset without OS:
press and hold both softkeys of X1, and press power button to turn on phone. but don't release softkeys until appears blue text with white background. slide put keyboard press R, wait to complete then press SPACE.
phone will be hard resetted. if not helped to boot OS, or there's no OS, or you did task29 before then do another task29 after this prosedure.
hope it helps
Click to expand...
Click to collapse
orkhanahmadov said:
did you try another usb port of PC?
Click to expand...
Click to collapse
Very good explaination....
Faffa_mcr said:
mmm no...but I think that's another problem, coz when I put the phone on ac mode, it's the same situation...
Click to expand...
Click to collapse
did you try method that wrote first.
and off course try another usb port, or another usb cable.
because if the phone did'nt recognized by PC, it means there's problem with cable or usb port if other things are OK.
hello,
The hd7 is stuck on the htc logo and then connect to pc
I want to know how to make it work
thank you
octopus82 said:
hello,
The hd7 is stuck on the htc logo and then connect to pc
I want to know how to make it work
thank you
Click to expand...
Click to collapse
What happened to make it get stuck on the HTC screen? Were you updating it or flashing a rom?
You can try a hard reset.
Turn the device off. If you can't turn it off with the power button pull the battery out and put it back again.
Press and hold the Volume Up and Volume Down buttons together and power the phone back on and continue to hold the Volume Up and Volume Down buttons until the factory reset screen appears and then press Volume Down to confirm hard reset.
This will wipe all your apps and data.
If that doesn't work check your SD card. It may be corupt and need to be reformatted or replaced.
the hard reset does'nt work, even by pressing the volume buttons and power I have the htc logo that appears and the connection pc
octopus82 said:
the hard reset does'nt work, even by pressing the volume buttons and power I have the htc logo that appears and the connection pc
Click to expand...
Click to collapse
what do you mean by " htc logo that appears and the connection pc" ?
the problem has been solved by flashing the boot with a special device
octopus82 said:
the problem has been solved by flashing the boot with a special device
Click to expand...
Click to collapse
what do you mean ?
there is a device that repairers possess, it is to flash the boot by soldering very fine wire on the phone (open of course!) and each phone has its own shema must be respected
I see many of you do not understand what I write, I do not know if my English is posing problem because I translated from French to English with google translate, or else it is you who did not understand the maneuvers made
octopus82 said:
I see many of you do not understand what I write, I do not know if my English is posing problem because I translated from French to English with google translate, or else it is you who did not understand the maneuvers made
Click to expand...
Click to collapse
We understand...the repair shop used a device known as Jtag or Riff box to repair you device!
It's that spammers keep reposting on this thread. There's one above this post which I'm going to report now, just like the one I reported yesterday!
hey xda
i made this topic a couple days ago, and i want to explain my self better. but i NEW to this kind of stuff.
last topic : http://forum.xda-developers.com/showthread.php?t=2567886
my phone was 6603 and 10.3.1.A.2.67 rooted. then the 4.3 was release. so i wanted to install it. i startet following the tut for the 4.3. i copied the zip to my sd card, and the ftf to the flashtool/firmware. i was ready to start so i booted up in cwm(think it is) nad choosed the 4.3 and installed it. after that i rebooted my phone and nothing happen and stuck on sony logo screen, and i could only boot up in recovery mode. didnt know what to to so i i see this option called "reset/factory" or something in the xdualrecovery and i pressed in and now my phone cant even turn off. only reboot it so i cant get it into flash mode, and my pc cannot detect my phone either. i meesed up my phone..
i hope u guys out there understand my english and my problem here, i really hope somebody can help me here.
dannyb9293 said:
hey xda
i made this topic a couple days ago, and i want to explain my self better. but i NEW to this kind of stuff.
last topic : http://forum.xda-developers.com/showthread.php?t=2567886
my phone was 6603 and 10.3.1.A.2.67 rooted. then the 4.3 was release. so i wanted to install it. i startet following the tut for the 4.3. i copied the zip to my sd card, and the ftf to the flashtool/firmware. i was ready to start so i booted up in cwm(think it is) nad choosed the 4.3 and installed it. after that i rebooted my phone and nothing happen and stuck on sony logo screen, and i could only boot up in recovery mode. didnt know what to to so i i see this option called "reset/factory" or something in the xdualrecovery and i pressed in and now my phone cant even turn off. only reboot it so i cant get it into flash mode, and my pc cannot detect my phone either. i meesed up my phone..
i hope u guys out there understand my english and my problem here, i really hope somebody can help me here.
Click to expand...
Click to collapse
Hey mate,don't worry just a soft brick.
What u need to do is press volume+ and power button at same time for 5 seconds or something to restart your device nd then connect your device in flashmode by pressing volume down nd connect it to the pc, try to connect it very fast before the device boots up nd final step: flash a older ftf
enjoy
Or keep pressing the three buttons until you fell 4 vibrations, first one is for the reboot of your cell, the 3 next are annoncing the powering off ^^
Hope I could help a bit ^^
Oxydeme said:
Or keep pressing the three buttons until you fell 4 vibrations, first one is for the reboot of your cell, the 3 next are annoncing the powering off ^^
Hope I could help a bit ^^
Click to expand...
Click to collapse
3 buttons?
He only need power and volume up for this :victory:
gripfly said:
3 buttons?
He only need power and volume up for this :victory:
Click to expand...
Click to collapse
Verified, my excuses, yep only this two buttons ^^'
gripfly said:
3 buttons?
He only need power and volume up for this :victory:
Click to expand...
Click to collapse
i need it to be off. if i press power button and vol up at same time it reboots/restart, what i need is it to turn off :/
dannyb9293 said:
i need it to be off. if i press power button and vol up at same time it reboots/restart, what i need is it to turn off :/
Click to expand...
Click to collapse
Yeah, If you let once vibrate you reboot. If you hold it up to the 3 other vibrates it turns off.
gripfly said:
Yeah, If you let once vibrate you reboot. If you hold it up to the 3 other vibrates it turns off.
Click to expand...
Click to collapse
Thanks! that actually worked.
Hello...
I buy a moto g 2014 XT1063 and i follow the tutorial in this xda forum to unlock the bootloader, after that the phone restarts fine and work well. Then i power off the phone and turn on again then the phone dont turn on :S no custom no bott not nothing!!!! i follow this tutorial http://forum.xda-developers.com/moto-g-2014/help/qa-unbrick-hard-bricked-moto-g-2nd-gen-t2972832but dont work for me uu ANY SUGESTIONS?
What have you tried after that?
The battery was ending?
Tried to plug the charger something happens?
....
A fix...
Have you tried holding the power button?
hold it for a minute or two to see if starts...
Nothing. Try again with the charger plugged.
hold the power button forces the phone to reset. Just like in windows when it is stuck. Maybe your phone is just stuck.
Good luck.
baybutcher27 said:
What have you tried after that?
The battery was ending?
Tried to plug the charger something happens?
....
A fix...
Have you tried holding the power button?
hold it for a minute or two to see if starts...
Nothing. Try again with the charger plugged.
hold the power button forces the phone to reset. Just like in windows when it is stuck. Maybe your phone is just stuck.
Good luck.
Click to expand...
Click to collapse
i try everything but cant respond... then i leave the phone unpluged for a night and today i plug in again and bum!!! the phone is awake... Why the phone goes from 80% battery to a 0% :S is a bug or something?
now i have another problem... i do a clean install factory reset from my CWM and try to install the 5.0 flasheable ROM but they stops at the second phase :S
I am not a moderator or someone that is from xda developers, but sounds like you need a newer version of ClockWorkMod (or an other custom recovery for your model)
Older versions of cmw may not support android 5.0
its the peanut said:
I am not a moderator or someone that is from xda developers, but sounds like you need a newer version of ClockWorkMod (or an other custom recovery for your model)
Older versions of cmw may not support android 5.0
Click to expand...
Click to collapse
hows that supposed to help? he can't turn his phone on...
mrtaylor1997 said:
hows that supposed to help? he can't turn his phone on...
Click to expand...
Click to collapse
If you read his second post it wil answer your question.
He says he got another problem flashing a 5.0 custom rom.
its the peanut said:
If you read his second post it wil answer your question.
He says he got another problem flashing a 5.0 custom rom.
Click to expand...
Click to collapse
Oh, I'm sorry
mrtaylor1997 said:
Oh, I'm sorry
Click to expand...
Click to collapse
Dont feel bad my friend, it can happen alot.
Hold power and sound down key for 130 sec. After u see menu click on reboot.