Database Develop

My MTeor looses connection settings and mail account

Evry two times i switch off the phone, my MTeor looses its connection settings.
This makes it impossible to connect to the internet, wap, etc. In addition, my POP mail account is deleted.
Anyone had the same problem and found a solution ?
I called Qtek assistance but they dont know anything about this issue.
Luca
HTC WWE MTeoR
Radio : 1.06.00.10
ROM: 5.1.195.14955

Yes I have this problem too - and also a problem with call waiting - when you are on the phone and have call waiting enabled for "notification" the phone HANGS!
The MTeor has a terrible radio stack and needs urgent ROM fixes...
H

Same here. The HTC ROM is crap.

I have now updated my phone with the imate rom.
Just like the HTC ROM it looses all of the connecteion settings and email accounts and the battery life is just as crap.
This phone is a pile of junk.
Period.

I'm sure that future ROM updates will correct any problems MTeoR has.
If you recall, the qTek 9000 was far worse on it's first ROM version, MTeoR is much more usable as a v1.0 device.
@Pagemakers: I understand your frustration/dissapointment, but posting the same thing on every different thread in the MTeoR forum is not nice. Are you certain that your phone is OK? I have a MTeoR working with 3G Cosmote network and it works fine, no loss of settings whatsoever (I also have an 1GB microSD card in it, working fine). Plus, I get 3 full days AT LEAST on each battery charge (UMTS coverage all the time).
Try to send your phone for a service check or exchange it (might be a case of bad production series - happened to me with a Nokia N93).

Re;
Flashed with dopod rom . now work fine ! but only english

Hi,
i have flashed my mteor with the dopod rom..
Mail account and c° go away every 2 boots .... :-(
and when BT is actived i get less than a day battery..
etienne

Missed calls on WM6 ROM + 2.47 Radio anyone?

Has anyone else noticed their wizards missing calls and txts since updating to WM6? It seems to have the same problem that the AKU3.x ROMS have with missed calls, but not as bad. So far I've noticed that I'll miss a call if the phone has been in standby for a couple of hours. Wake it up and phone calls start coming through again. I'm using 2.47 radio from molski's 2.26 final rom, and had no problems with missed calls before I replaced 2.26 with WM6.
WM6 Crossbow + 2.47.11 Radio (Molski.Biz.AKU2.3)

I have on at least one occasion. So I'm not sure if that was a fluke or a similar problem you face. I've got the same setup though, WM6 (Orwells) with the 2.47.11 radio.
I've also noticed weird things with this ROM such as email notifications that are setup to blink the light on the phone amber with no limit and also ding. Sometimes I checked to see that I did get an email according to the Today Screen plug-in, but it never dinged or flashed the amber light. So I will soft reset it and it then it works fine.

Phone did not show missed calls and voicemail indicator does not show either. I called my voicemail and there were a ton on messages.
G3 Tmobile MDA
WM6
2.47.11 Radio Rom

IT HAS BEEN STATED MANY TIMES! That this is a beta rom. There are lots of bugs and problems with these roms. These are not final roms. They were still in testing when they were leaked. From what i have seen and read some people were recommending going with the 2.19 radio rom. i have the 2.26 radio and it works good enough for me here in southern ca. i have had no problems at all. So try flashing with another radio or just switch back to a more stable rom guys. Good luck

Hi
I had same problem but installed 2.19 radio rom and everything is fine. Therefore I say use 2.19 radio rom, works best with AKU 3.3 rom.

FOR ALL PEOPLE WHO ARE USING WM6 !!!! INSTALL RADIO VERSION 2.19 IT IS THE ONLY VERSION THAT WORKS WITH ANY ROM SO DOWNLAOD AND INSTALL IT !!!!! with other radio roms u get missed calls and other problems so the best way to solve is to install radio ROM version 219 this has been discussed in many topics in Farias and molskis ROMS and in WM6 roms threads.

Are you talking about the file "T-Mobile-UK_2.19.11_Radinly.zip" on the FTP site ?
Because I saw indeed strange things with my phone and after reading this post, I checked and saw that I was using radio 2.47.11

i live in an area with a weak signal. in the 2.19 radio my reception is much worse and i have a larger area in which i get no reception at all.

hello, i have the 2.47.11 and no problems. SMS, GPRS, Bluetooth ... Al works perfekt-
regards Sven
__________________
Windows Mobile 6
IPL: 2.26
SPL: 2.26
GSM: 02.47.11
OS: 10.1.0.811 WWE
VPA compact II - vodafone
1x 1GB miniSD
1x 2GB miniSD
Nokia HS-12W A2DP Headset

sreins said:
hello, i have the 2.47.11 and no problems. SMS, GPRS, Bluetooth ... Al works perfekt-
regards Sven
Click to expand...
Click to collapse
same with me i think it depends were you live. like me 2.19 doesent work for me i would get dropped calls.

Well. I live in a large metro area so coverage is usually excellent. I don't have problems with missed calls when using AKU2.x ROMs. Its just a prob with AKU3.x and WM6 ROMs. When I played with AKU3.x ROMs, changing the radio ROM didn't make much of a difference. Even so, I went ahead and downgraded the radio to 2.19.11 anyway to see if it makes a difference in WM6. Also, the problem only occurs after the phone has been on standby for a couple of hours or more.
WM6 + 2.19.11 Radio ROM

I wonder if it has to do with GSM 850/1900
I wonder if it has to do w/ different ROM's liking different GSM frequencies. Cingular's (I'm sorry 'the New AT&T') network is so mixed up, it uses a combination of all 3 frequencies. At least T-Mobile's frequencies are consistant throughout their network, but their coverage isn't as good.

grinny11 said:
i live in an area with a weak signal. in the 2.19 radio my reception is much worse and i have a larger area in which i get no reception at all.
Click to expand...
Click to collapse
I live in a big city and usually have good coverage. The 2.19.11 radio does have significantly weaker signal reception than the 2.25 or 2.47 radios. Unfortunately I had to make a choice between staying on AKU2.x and using the radio of my choice or going with AKU3.x and sticking with 2.19. Right now I am testing the 2.61 radio and it seems to be working with AKU3.3. I have had 2 calls that went directly to voicemail but I am beginning to think that was just a network fluke and not an issue with the radio. No delayed or missing notifications. All attempts to call my phone are making it to the phone. Testing is still in progress and maybe the issue just hasn't reared its ugly head yet. But I am beginning to be hopeful that I can have my cake (AKU3.3) and eat it too (good radio)

Best RADIO for TOFCLOCK/HELMI WM6 ?

7 radio ROM exist for our HIMALAYA -
http://buzzdev.net/index.php?option=com_remository&Itemid=132&func=select&id=26
My experience -
1.08 - Modem not ready sometimes for GPRS > need Off/On radio. Faster discharge battery ?
1.17 - Phone not reply (inaccessible) for incoming talk sometimes > need Off/On radio.
1.19 - Off/On radio (flight mode) is very slow or imposible.

which one is the most stable?

Im trying now 1.14.

Radio 1.19 is so far so good for me.

1.17 works good on my HIMALAYA(TOFCLOCK)~

signal problem
Now I`m using 1.18 .
With my experience with my device , this radio version is very bad . sometimes the signal strength lost / blank . Huhhh
I`m tired with my device .
Anyone can solve the signal problem ?
with change the radio version or what !!!
Thanks

I am still using radio version 1.08 and this is working fine for me,
Best Regards

Im still running 1.08 too but not stable enough. Will try others soon....

Hmm, right now I'm using 1.18 (were using all of them already).
Signal is good, and right now battery is 18% and I'm still able to talk, without any voice quality drop.
Still, can't return from airplane.

Hi,
Is it possible to turn the flight mode off from the wireless manager. I do not seems to be able to do that with radio rom 1.18. With radio 1.08 it was possible. Well I will use with radio rom 1.18 for a few days to see if it is stable.

Hi, having the same annoying bug for radio roms 1.17, 1.18 and 1.19 - after a reset (hard or soft) I see gsm network signal for some time (from 1 sec to 3-4 hours) and then it disappears, and there's no way to make the phone get operating again. I'm still trying the 1.08, and it seems not to have any strange behaviour... it does the same with WM2003, 2005 and 2006.
I really do not care about the battery, as long as I can receive calls so as for now, I'll keep the 1.08...

so.... it's not a bug. It seems you have a broken radio or some really old hardware? Don't know. It's PH10B, right?

@utak3r could you explain me more detail about PH10B concerning its capability. It must be good knowledge for us. Thank in advanced. Also if you have a way how to improve the performance, indeed not to change the PDA with the new one

I contacted SosTekIt, which released an Italian rom based on WM2005, and he was of the same opinion; but, in WM2005 I'm still trying with the same SIM card, I have no issues at all.
Yes, the board is PH10B, and the strangest part ever is that in WM2006 if I can make a call in the few seconds I see the signal, then the phone is fully functional, even for HOURS. But when I roam out of the gsm cell, the signal disappear.
Truly, this is freaking me out

Well, I can believe you...
This is really strange, and as for now I can find no explanation for such a behaviour. Will try to think about it, but... oh well.

Some more details...
1. Same strange behaviour in WM2005 (buzz rom)
2. The "Preferred Networks" (Settings -> Phone -> Network -> Set Networks) list shows that my mobile operator is always the last, unchecked. I modify the list, update the settings, and they keep existing until I get out of GSM cell.
3. When awakening, if the phone shows the G icon of GPRS, then it locks to the signal and never looses.

Adivce Needed for After Rom Update

Hi guys, As you have prob seen from other posts from me I have been having troubles and tried different Roms, I am now running the AZTOR's latest rom after recommendation and I must admit is almost perfect nice and fast, phone no longer getting hot and the phone quality in call is fine.
However there is 1 major issue I need to overcome in order to keep this otherwise i am going to have to try and go back to the crappy T-Mobile rom,
Ever since I upgraded the rom (and doesn't matter which rom I am running) my Active Sync will not connect to our Exchange server over the internet. I have verified all the settings multiple times and even checked the other HTC phones in the company (of which all are working perfectly) my one just takes a few minutes then comes back saying it couldnt connect to the server with error number:
0x80072F78
Has anyone else experienced this or know how to fix it? I really need to the Active Sync to work over the internet or I am a bit buggered.
The only other Issue I have is I did have a fairly good HSPDA signal at my work location before the rom upgrades now I only have 3G and when I go out onto the road it will briefly flash up with HSPDA but only one bar then switches back to 3G So the signal strengh is worse then it was with the T-mobile rom.
Here are the version nos on my phone:
Rom: 2.03.405.2 WWE
Date: 12/23/08
Radio: 1.00.25.05
Protocol: 52.29.25.12H
Bootloader Screen:
DIAM200 64MB
SPL-1.93.Olinex
MicroP-Diam (LED) V11
PSOC-Vict STAGE_PVT v0x20
Also trying to get the T-Mobile Rom back and the T-mobile Tech Guys says I need to get it from HTC and HTC says its T-mobiles job to give it to me.
Who do I beleive?
Regards,
Max

reception lost in my room

Hey...so this is my story. i tried to figuere out if somebody got the same probs but couldnt find it anywhere so i am just asking all of you thanks...
SO here we go...
My Provider is E-plus and i live in Stuttgart (germany)
I got my HTC kaiser about 6 month ago and it always worked well and i didnt have any problems. I had reception everywhere (also in my room). The regular Windows mobil was installed i didnt change anything.neither the rom version nor the radio rom. so everything was how i got it in the beginning.
Then i have flashed the new version of Windows mobile 6.1 (downloaded from the HTC homepage,sorry i dont now the specific name and which radio version it was) but from that moment on my mobile phone didnt reciept in my room anymore. There was always the "!".
Then i have tried:
- to look for reciept manually (it found different providers but couldnt connect with those
- i ve tested my sim card with other phones and it worked
- i have tested different Roms and radio roms such as:
original rom
L26_KaiserDiamond_V9 (englisch)
Dutty's WM6.1 Hybrid v2 5.2.19716/5.2.19700 (englisch)
German clean WM6.5◄ by ChrBeck (CHome)
- different radios such as:
KAISER Radios These Radios were ripped from Kaiser WM6.1 ROMs.
1.65.14.06
1.65.20.29
1.65.16.25
1.65.17.56
1.70.19.09 -
1.71.09.01 -
lots of 1.58.XXXXX and 1.64.XXXX
and even more
--> they all work while i am not in my room. but non of them worked in my room...and it did before.
then i decided to use the original version again which i did
i ve installed Rom:
CE OS 5.2.1620(Build18125.0.4.2)
1.56.407.3
Radiorom: 1.27.12.32
What happened now is that it shows that it got full reception but the phone still doesnt work in my room. but i can use the UMTS date transmission --> i can use the Internet
as soon as i am outside and soft reset the mobile phone it works perfectly.
i am not shure if i have listed everything that is important but if somebody could help me with that i would be pretty cool because a mobile which is just working half of the time isnt very usefull...
any ideas? thanks

Seems like your phone sees the signal seded by the Mobile Operator to you but it isn't able to send a signal back to tell the operator that it is there. Seems like something causes your internal Antenna of the phone to be not as powerfull as at the beginning. Maybe you installed a Radio that has lowered the power and no Radio will rise it again cause the radio things you are in a power restricted area.
In my Charmer I was able to get the power of the radio unit 10% up but the trick doesn't seem to work for the Kaiser. Maybe an user with more Kaiser knowlege can help you better.

Anything new in your room (or nearby) that might be causing interference?

thats what i thought first too...because i ve installed wireless power point...but i have deinstalled them in my room again and it didnt work neither