Database Develop

Cingular 8125 rom upgraded to rom 2.16.9.101 successfully

I have installed the 1.12.10 GSM on it after making backups with aWizard. I am happy to report that it does work and that it does speed up the initial connection. Before (with 1.09.11 I beleive) I could log into (enter my PIN) and would still have some time before I would connect and get signal bars. It also seemed to increase refresh rates of the bars. Now the signal is usually found before I even finish entering my PIN muchless the today screen loading.
These tests were made in my basement at my house where I typically have been getting 1-3 bars. now to test 1.13.10 and 2.8 OS to see if it works.
I will say I thought it broke at first because I couldn't get my PC to talk to it after it reloaded, then I did another soft reset and the boot screen the second time didn't list the GSM version, even though the OS did see and use GSM. I re-ran the CID unlock procedure again since I could talk to the phone again. Reset again and GSM ver was on the boot screen again.
I also swapped out the boot screen for a bmp and that worked wonderfully. my only question is if there is a way to swap out the booting screen of the OS and not just the IPL Rom.
cheers,
ET

I have just done the RUU install of 2.16.9.101 which also upgrades IPL/SPL to 2.16. It changed my radio version to 2.7.10 and my protocol version is 413.1.0.3. This ROM date is 2/6/06.
Immediate differences are the battery notification is now at the top where on Cingular's ROM it was at the bottom next to the comm switch program. That and everything is I-Mate branded. No Get Good, but instead now I have I-Mate backgammon and Skype. And instead of the Cingular Mail link now there is an I-Mate mail link.
I will update later with more.
More... OS ver 5.1.195 build 14847.2.0.0 IDK if this is different or not.
Update 11AM: I have tested more. ZPhone themes I can't seem to install... IDK why but with the original Cingular ROM I couldn't either. The original ROM had a bug that used the proxy of the modem setting on the wifi setting making wifi not work unless you went and disabled it since it is enabled by default. This new rom after installing "Cingulcustomize_No_Emails.cab" to get MediaNet back, wifi just works. Even with the Proxy set on the modem connection. My Bluetooh headset (Jabra HT800) works great. Comm Manager is real nice. Even showing you the status of SMS and GPRS/EDGE connection. I want to play with it a little more to see if I can control those two or not. Gone from teh Cingular ROM is the ability to click on the Edge status icon in the notification area and tell it to turn on Wifi. But the Turn on Flight Mode still exists under the Cell Strength bar. Signal strength is comperable to the 1.12.10 radio rom I had before the upgrade. And IDK if it is taking longer to load from a reset or not, but before the Phone radio would be up and running just as I was finishing putting in my PIN unlock. But now it is running and connected before I can even start to input it. Just observation, that extra second doesn't mean anything.

I also have the 8125, so I am curious if the Imate ROM will cause any problems after the upgrade. I am not sure I want to wait a few more months until Cingular gets around to providing their upgrade.
Some other posters with the test/beta Qtek AKU 2.0 rom reported that they had trouble with the device resetting itself and problems with Wi-Fi. Let us know if you experience any issues with this ROM.
How has EDGE speed been, any improvements over the shipped ROM? Have you tried push email?

ok, i updated my 8125 to the new rom and am having two issues atm. first, the phone signal icon and the battery icon on the today screen is cut off so i only see the edge icon. secondly, i cannot start wifi at all, no matter what i do :\ (it looks like it's thinking but doesn't actually turn on ) now i did apply the cingular extended rom to this so i dont know if that caused both issues or not. as for edge performance, i'm in an area with bad signal so i couldnt exactly test it. i'm going to be clearing storage tonight and see if that fixes both issues or not. i haven't tested push e-mail as clubimates servers AREN'T supporting direct push (ie they don't have SP2 installed or have it enabled on exchange).

Locked up
Well I am noticing that it is locking up if I let it sit for a while to where I can't bring it back up. I have disabled the lock code to see if that fixes it.
I would have a feeling that the problems you are having are because of the enhanced rom difference. it won't hurt to try it as is like I did since you are having problems with it.

were can I fine install
I look for the rom in the ftp but there is no RUU install of 2.16.9.101 can you please tell me where can I fin this rom
thank you

Here:
http://forum.xda-developers.com/viewtopic.php?t=42638
Scroll down to HTTP server link.
Cheers

thanks
thank you for giving the info on where to get the link. I have been away from a pc today.
as an update: the phone seems to be stable with the new rom (I am actually using the phone now using edge and it seems faster than my old phone was which was a nokia.)
I haven't had it lock up on me since I uninstalled battery pack pro, disabled lock code, and uninstalled skype & backgammon so take your pick as to what fixed it. I will do some more expereriments to try and figure iit out.
later,
ET

Are you having the same issues as darkjedi who said he's having problems with WiFi and signal strength icon?

after the upgrade i cant find the GPS ICON
even i try to delete the redirect string in the registry like i used to do before
still i cant see the icon on my setting page
please anyone noticed this problem ?
tx

exchguy said:
Are you having the same issues as darkjedi who said he's having problems with WiFi and signal strength icon?
Click to expand...
Click to collapse
i finally fixed the signal strength icon (but don't ask me how), but wifi is still borked

no more problems, lock ups or otherwise
My guess with my problems were related to Battery Pack Pro demo. Even on the original rom I couldn't get it to work right with the assignable hard keys.
Anyway, I did not modify the original EXE one bit like darkjedi said he did. He seems to be much more advanced as I don't know how to do what he did and not that familier with its registry settings yet. But I naver had any problems with Wifi nor with icon placement.
My home wifi does use WPS-PSK TKIP using a Netgear WG302. Battery life seems good, but I do get a little crackle every now and then on my end of the bluetooth handsfree. People I talk to haven't said they hear anything other than perfect clarity. I would have been told if they heard anything since part of my reason to spend the money now rather than later was my voice and signal quality on my old Nokia was getting to be bad and they wouldn't waste a second ragging me if voice and signal problems were re-appearing. But mostly the crackle is few and far between and usually when my headset is on the other side of my body or I am a few feet away from my phone.

i didn't modify the original EXE, i installed it as normal, then after the fact, copied the cingular extended ROM then installed each cab manually. i didn't get a chance to try wifi before i applied the extended rom, but i just might hard reset and try that.

i dnt see the rush to upgrade if u have a cingular 8125 since there goa offer rom upgrades for the unit. with all the bugs i rather just get a ad2 bt plugin (wish they made it) and just do that

what roms do they offer? On my past phones I have had to have major problems before they would flash a new version of the Rom (my last 2 symbian phones).

darkjedi said:
i didn't modify the original EXE, i installed it as normal, then after the fact, copied the cingular extended ROM then installed each cab manually. i didn't get a chance to try wifi before i applied the extended rom, but i just might hard reset and try that.
Click to expand...
Click to collapse
ok... the only cab I installed for Cingular was the one I mentioned earlier. I have since installed spb power plus and their weather app and I am still stable. Not one failuer and my bluetooth is actually acting better from some reason. I was working on my car today with teh phone in the car and I was about 10 feet away without any noise or other problems.

Re: thanks
ethorn said:
thank you for giving the info on where to get the link. I have been away from a pc today.
as an update: the phone seems to be stable with the new rom (I am actually using the phone now using edge and it seems faster than my old phone was which was a nokia.)
I haven't had it lock up on me since I uninstalled battery pack pro, disabled lock code, and uninstalled skype & backgammon so take your pick as to what fixed it. I will do some more expereriments to try and figure iit out.
later,
ET
Click to expand...
Click to collapse
Is there any settings to configure edge? I only see GPRS in the connections section.
This version appears quite stable but's only my second day since upgrading my 8125 from the QTECH 2.8.7.102. I really like the Comm manager and the Push Email icon works great.
Thanks!

name of account
the only thing that I have notice so far is that the name of my celular company (I could see before upgrade) now i only see numbers.

exchguy said:
I also have the 8125, so I am curious if the Imate ROM will cause any problems after the upgrade. I am not sure I want to wait a few more months until Cingular gets around to providing their upgrade.
Some other posters with the test/beta Qtek AKU 2.0 rom reported that they had trouble with the device resetting itself and problems with Wi-Fi. Let us know if you experience any issues with this ROM.
How has EDGE speed been, any improvements over the shipped ROM? Have you tried push email?
Click to expand...
Click to collapse
On the new imate ROM I'm getting between 65 and 110 kbps on edge. Latency is still crap at about 1.5 seconds on average, but that's what it's always been for me.
Direct push is great. Assuming you have Exch SP2 installed, push works without any other changes. I'm averaging between 7 and 10 seconds for an entry to push out after it gets to Exchange. I haven't installed the device management tools yet, but I'll do that soon and let you know how well they work.
I just noticed wifi isn't working. If I enable it in comm manager, the button is ringed in green as if it's on, but the left green led does not blink and it does not detect my open, unsecured access point. I did install the cabs from my original cingular extended rom, and one of those appears realted to wifi, but not sure what it does. I'll mess around some more and see what I can do. I'm not totally heartbroken that wifi is messed up, but it does bug me that I don't know why it aint working.

Need Cingulcustomize_No_Emails.cab file
ethorn said:
I have just done the RUU install of 2.16.9.101 which also upgrades IPL/SPL to 2.16. It changed my radio version to 2.7.10 and my protocol version is 413.1.0.3. This ROM date is 2/6/06.
Immediate differences are the battery notification is now at the top where on Cingular's ROM it was at the bottom next to the comm switch program. That and everything is I-Mate branded. No Get Good, but instead now I have I-Mate backgammon and Skype. And instead of the Cingular Mail link now there is an I-Mate mail link.
I will update later with more.
More... OS ver 5.1.195 build 14847.2.0.0 IDK if this is different or not.
Update 11AM: I have tested more. ZPhone themes I can't seem to install... IDK why but with the original Cingular ROM I couldn't either. The original ROM had a bug that used the proxy of the modem setting on the wifi setting making wifi not work unless you went and disabled it since it is enabled by default. This new rom after installing "Cingulcustomize_No_Emails.cab" to get MediaNet back, wifi just works. Even with the Proxy set on the modem connection. My Bluetooh headset (Jabra HT800) works great. Comm Manager is real nice. Even showing you the status of SMS and GPRS/EDGE connection. I want to play with it a little more to see if I can control those two or not. Gone from teh Cingular ROM is the ability to click on the Edge status icon in the notification area and tell it to turn on Wifi. But the Turn on Flight Mode still exists under the Cell Strength bar. Signal strength is comperable to the 1.12.10 radio rom I had before the upgrade. And IDK if it is taking longer to load from a reset or not, but before the Phone radio would be up and running just as I was finishing putting in my PIN unlock. But now it is running and connected before I can even start to input it. Just observation, that extra second doesn't mean anything.
Click to expand...
Click to collapse
Where did you get the "Cingulcustomize_No_Emails.cab" file? I have searched everywhere and cannot find it! Help?

How to fix Radio (3G) not working (voice calls, data)

My original HTC (Radio 1.27.12.11) never was able to recieve or create voice calls via 3G nor do any data transfer. Only GSM mode was working, but then for what reason I was going for the Kaiser ?.
Thanks to Pof's work on the HardSPL tool and Dark Simpsons "htc rom tool" and all others contributed to this tools, using the posted french ROM with Radio 1.27.12.17 and the rest from the original HTC rom I compiled a new ROM image.
With this Radio rom I just confirmed that 3G is now working using voice and data. All former 3G problems are gone.
Steps:
- Downloaded original HTC rom and French rom
- Using "NBHextract.exe" to extract the rom components.
- Using the "00_unkonwn.nb" from the french and the rest from the original HTC rom and compile using "htc rom tool" a new rom.
- Now using HARD SPL to install new boot loader and then just transfer the new rom using the original HTC upgrade package with the new rom instead the original one.
Regards

can you post your rom ?
dauphinas365 said:
My original HTC (Radio 1.27.12.11) never was able to recieve or create voice calls via 3G nor do any data transfer. Only GSM mode was working, but then for what reason I was going for the Kaiser ?.
Thanks to Pof's work on the HardSPL tool and Dark Simpsons "htc rom tool" and all others contributed to this tools, using the posted french ROM with Radio 1.27.12.17 and the rest from the original HTC rom I compiled a new ROM image.
With this Radio rom I just confirmed that 3G is now working using voice and data. All former 3G problems are gone.
Steps:
- Downloaded original HTC rom and French rom
- Using "NBHextract.exe" to extract the rom components.
- Using the "00_unkonwn.nb" from the french and the rest from the original HTC rom and compile using "htc rom tool" a new rom.
- Now using HARD SPL to install new boot loader and then just transfer the new rom using the original HTC upgrade package with the new rom instead the original one.
Regards
Click to expand...
Click to collapse
can you post your rom ?

rom location
Just replace the rom in the HTC_WWE rom-installer with this one. Worked for me without any problems with Kaiser got from UK, but no warrenty
http://rapidshare.com/files/61052345/RUU_signed_WWE_1.56.405.5_22.45.88.07_1.27.12.17.zip

Update: After 24h using 1.27.12.17, problems just partly vanished
Looks like it was a bit too optimistic. Here are the results of 24h usage:
-3G voice and data are sometimes working. With the 1.27.12.11 it never worked with 1.27.12.17 it work for some calls / times and then 3G still looks like logged into the 3G-Network, but phone is unreachable. The phone needs to be switched off/on again to get it working. Then one call / data connection / incoming call is possible. After that darkness again. At least one 3G action is possible in comparion to earlier radio rom, but it is still far away from perfect.
It is an improvement but HTC has still to do a better job with the radio rom. Hope we will get an update soon behind 1.27.12.17

dauphinas365 said:
Just replace the rom in the HTC_WWE rom-installer with this one. Worked for me without any problems with Kaiser got from UK, but no warrenty
http://rapidshare.com/files/61052345/RUU_signed_WWE_1.56.405.5_22.45.88.07_1.27.12.17.zip
Click to expand...
Click to collapse
thanks, I'll give it a try in a few days.... as to warrenty - HTC appears not to honor warrenties, HTC US said "not our problem", HTC UK has not answered in over a week....

If yo can live with french try the french rom
... now I run for 24h with the french rom, no customization.
It is better then the HTC with the replaced Radio, posted above. I can call 3G, do data connections and receive incoming calls. It seems after 24h pretty stable. Therefore it looks like changing the radio is not enough and that as the french rom using a slightly newer OS then HTC original, there are some changes too included.
- Problem: Roaming between GSM and 3G, somtimes the phone needs 5 or more minutes to login into the network again after areas with no coverage. Completly different to the Nokia N95, which can handle such issues with no problem @ all
- About HTC service. I called them too and they tried to direct my to a service partner I should pay for getting my problems solved, that is very different to what I understand about warrenty too.

I would be really thankful for anyone who could produce a Radio-only flash available using the French .17 Firmware.
The stock .11 radio ROM is completely, I mean really completely useless for me. Any time I try to write a SMS, make a phone call or data connection my Kaiser immediately loses the connection to the network and I have wait for the phone to reconnect itself. I also cannot receive any incoming calls.
I remember that the first radio ROMs for the Hermes were terrible but this is even worse. Too bad because I'm really enjoying the rest of my Kaiser so far.

It is not only the french radio rom .17 ..
I have done lots of test and added above a rom HTC with french .17 radio stack. But there is more then then just the radio. It is better with the mixed rom, but still not good to use it as a reliable phone.
Best what you can do is using the french rom and you get a 50% chance that 3G works incoming and outgoing.

I'm rather new to creating my own cooked ROMs so I'm right to think if I want to upgrade my Kaiser to the .17 Radio ROM, the only thing I need to do is create a .nbh file from "02_Unknown.nb" and flash the resulting nbh file using CustomRUU and my Kaiser will not be completed formated?
I'm asking this because my Kaiser is now perfectly configurated and personalized and I don't want restart install all my programs, I just want to try the new Radio ROM because the current version is completely useless.
Thanks for any info

well disregard my previous post, I just successfully flashed my Kaiser with the new Radio ROM and hopefully I will actually be able to call someone with my PDA phone.

Hi all, first I have to say that I'm in Dublin Ireland using vodafone and have my kaiser for about 3 weeks now and the most odd thing about that would be that it has been working fine 3G and 3.5G when within good coverage. All of a sudden last sunday it just stopped working with 3G I believe that network provider just changed something with its settings but I can't be sure. I would love to see a radio update soon but since I don't believe in miracles I've been trying some temporary workaround just to be able to call and text. It seems that it enough to go to settings -> phone -> network and set the BAND TO GSM. This way it doesn't use 3G but at least I can use the phone. Hope it could help anyone there.

Thanks for the info, I'll try that eventhough the .17 Radio Update did improve network connection somewhat but it's still subpar.
FYI, I was last Saturday in Dublin, eventhough only for an hour, and of course I tried my Kaiser but the 3G data connection completely refused to work. This was when I still had my .11 Radio ROM installed.
So far I have tried my Kaiser in London, Malpensa, Madrid and Berlin so the issue seems to be rather ROM related than provider related.

you're right, it has nothing to do with the provider I was wrong. I took my card from Era Poland with roaming and turned on my Kaiser. On O2 I had two bars on HSDPA and that beautiful H letter on the top of the screen but not possible to make a call, send sms or whatever. Switching to gsm always works. I upgraded to .17 and it looks exactly the same as it was I see no difference at all. The only thing that bothers me at the moment is that for me it's been working fine for some time. I've been using 3g in Dublin and Warsaw as well and for some reason it just stopped I just hope it's not any hardware issue.

Is this rom posted on #1 a radio only or the whole thing?

I have the same problem over here. I have the Tytn2 for one month now. I had vacation and i took the plane at Amsterdam (Schiphol) to Tenerife.
When i arrived in Tenerife i get a 3G icon and cannot make calls and cannot internet. I had manually switch to GSM band. Now back in Holland with auto-settings i have the same problem again. With 3G i can do nothing (call/internet). Anyone any idea?
I have a vodafona abbo, my simcard in the old tytn1 with same settings works well at 3G. Soon i call with htc!

Same problem here with HTC Tytn II in Holland on T-mobile,
switched 3G to GSM and luckely I can use the phone now,
but I really hope there will be a fix soon!
Thanks!

Same on AT&T
I'm having the same problem with my tilt. I had the 3G before the flash but have not had it since.

same her in nyc ...tried both radios....3g doesnt work....help....please

A hard reset does NOT fix the 3G call/internet problem
When i switch the telephoneband from auto to GSM the phone get's connected at G and i can call. But i want videocall.
Please someone ? Defect or waiting for rom ?

I too am experiencing this problem. It happened overnight one night -- 3G will not connect -- neither voice or data, but GSM (edge) works fine.
I'm on ATT, HardSPL with Schaps 4.22 rom. It was working fine in this configuration, then suddenly stopped. Tried Hard reset (no help), and tried upgrading the radio to .17 (also no help). Next step is to try and revert to original ROM/Radio/Bootloader (per "how to restore to factory for rma thread") to see if that helps.
If anyone comes up with a solution, I'd be grateful.

GSM not working but 3G works

Hey. Today is not my day
My phone wont work with GSM anymore, it works well with 3G but when it tries to connect to a GSM network it just dies :/ i have no clue what it could be. It was working well yesterday, i have tried to do a hard reset but still wont work. any ideas? Thanks.
Sorry for bad english!
by the way, there is a strange sound in the speaker when it tries to connect to a GSM network.
and it doesnt die if i have it on charge.

has you have set the telefonsettings to gsm network or to automatic?
My phone also needs the manual setting to GSM.

fraham said:
has you have set the telefonsettings to gsm network or to automatic?
My phone also needs the manual setting to GSM.
Click to expand...
Click to collapse
On automatic it sets on 3G becurse i got 3G here, and if it losts the 3G connection and tries to connect to GSM it dies. ( thats how i found out about this problem on the way too school this morning. )

in my network i observe problems with connects to GSM: Sometime i lost the GSM connection/signal, where my Wizard has a safty connection.
It can be a standard Problem with the current Radio ROM
I think about change the radio ROM. pse look to Diamond ROM development to find a instruktion. the ".25.05" should be the best Radio Rom with a better energy performence and better Signals. http://forum.xda-developers.com/showthread.php?t=407956
BUT i have not change in this time, while i test my Battery performance after a reducing of background software/applications.

fraham said:
in my network i observe problems with connects to GSM: Sometime i lost the GSM connection/signal, where my Wizard has a safty connection.
It can be a standard Problem with the current Radio ROM
I think about change the radio ROM. pse look to Diamond ROM development to find a instruktion. the ".25.05" should be the best Radio Rom with a better energy performence and better Signals. http://forum.xda-developers.com/showthread.php?t=407956
BUT i have not change in this time, while i test my Battery performance after a reducing of background software/applications.
Click to expand...
Click to collapse
Yea, but how come it just pops up this morning and the phone just dies completly when it connects to GSM? :S i have the .03 radio, and about upgrading that i dont know if i want to, what about guarantee and such if it wont fix the problem? i still can return it back. I dont want to loose warranty.
Thanks

w3pp3 said:
Yea, but how come it just pops up this morning and the phone just dies completly when it connects to GSM? :S i have the .03 radio, and about upgrading that i dont know if i want to, what about guarantee and such if it wont fix the problem? i still can return it back. I dont want to loose warranty.
Thanks
Click to expand...
Click to collapse
die completly = shut down/swith of the Diamond?
This i not have obervate.
If you follow the instructions, the Radio update is out of problems. If you will get the old radio version, so you can get it back with the original provider update of ROM.
for german Vodafone there is a download by vodafone.de under "technischer Support". i think the most providers has a update download. Look to your provider, if there be a ROM update.

fraham said:
die completly = shut down/swith of the Diamond?
This i not have obervate.
If you follow the instructions, the Radio update is out of problems. If you will get the old radio version, so you can get it back with the original provider update of ROM.
for german Vodafone there is a download by vodafone.de under "technischer Support". i think the most providers has a update download. Look to your provider, if there be a ROM update.
Click to expand...
Click to collapse
Yes it completely dies, like a shortcut
I'll have too check it out, im from .SE so i'll need to find a radio that works here then?
Thanks

before you look for a new Radio, make a reset or a hard reset. My be, that it "repair" your problem.
By my WIZARD i has update the Radio.
I think, that the radio ROMs for the Diamond are also standards (how by the WIZARD) without differences.
Radio ROMs look to:
http://forum.xda-developers.com/showthread.php?t=407956
or
http://forum.xda-developers.com/showthread.php?t=432770
Instruction for Flash: http://forum.xda-developers.com/showthread.php?t=416211
in this both threads must be a information for select the right Radio Rom.

fraham said:
before you look for a new Radio, make a reset or a hard reset. My be, that it "repair" your problem.
By my WIZARD i has update the Radio.
I think, that the radio ROMs for the Diamond are also standards (how by the WIZARD) without differences.
Radio ROMs look to:
http://forum.xda-developers.com/showthread.php?t=407956
or
http://forum.xda-developers.com/showthread.php?t=432770
Instruction for Flash: http://forum.xda-developers.com/showthread.php?t=416211
in this both threads must be a information for select the right Radio Rom.
Click to expand...
Click to collapse
Thanks for the advices!
Now im damn happy. for some reason it works like a charm again, i just had to fully charge the battery... :S dont know what went wrong. :s
I will stil flash my device tho : P
Thanks alot!

OK, i hope you get a better Signal after changing the Radio version.
so as i have read, is version 05 the optimal version with stable signal and lower battery consumption.
pse read self the linked threads to find your optimal Radio ROM.

fraham said:
OK, i hope you get a better Signal after changing the Radio version.
so as i have read, is version 05 the optimal version with stable signal and lower battery consumption.
pse read self the linked threads to find your optimal Radio ROM.
Click to expand...
Click to collapse
I will thanks for your help!
I just flashed unsigned HardSpl and it works so far
Thanks!

OK, i'm happy, that i can help you...
good night and greetings
Frank

I said it was working... yea it WAS while it got 100% battery power, when it sinks the GSM net losts connection, and when the battery is under approx 60% the phone starts to die.. anyone got any new tips today? : )))

hi all,
got this damn problem now too, yesterday and the 2 months before all works fine, and now ive got no gsm signal, 3g works but gsm not. did anyone found a reason? i try all... reflash radio (different versions) soft and hardreset but nothing works
please help me if anybody can

TomDaDj said:
hi all,
got this damn problem now too, yesterday and the 2 months before all works fine, and now ive got no gsm signal, 3g works but gsm not. did anyone found a reason? i try all... reflash radio (different versions) soft and hardreset but nothing works
please help me if anybody can
Click to expand...
Click to collapse
Hey, I did never solve the problem, i have sent mine back on warranty so i hope HTC will fix it for me.
No flashing will fix this problem, so you dont need too try that anymore.
I did all i could think of and didng make it so i let HTC fix it for me
If they say something about whats was wrong when i get it back i will tell you

w3pp3 said:
Hey, I did never solve the problem, i have sent mine back on warranty so i hope HTC will fix it for me.
No flashing will fix this problem, so you dont need too try that anymore.
I did all i could think of and didng make it so i let HTC fix it for me
If they say something about whats was wrong when i get it back i will tell you
Click to expand...
Click to collapse
hi,
i dont know whats going on with my device
today at my home in the morning nothing works, one hour later exactly at 8 o' clock when i arrived my work all WORKS, i've got the gsm signal under 1 second (yesterday at night my diamond search over 10 minutes for gsm signal, then it cames, but no gprs connection was possible). now i was very angry because i do a hard reset yesterday and i had to install and copy over 2 gb of data!

TomDaDj said:
hi,
i dont know whats going on with my device
today at my home in the morning nothing works, one hour later exactly at 8 o' clock when i arrived my work all WORKS, i've got the gsm signal under 1 second (yesterday at night my diamond search over 10 minutes for gsm signal, then it cames, but no gprs connection was possible). now i was very angry because i do a hard reset yesterday and i had to install and copy over 2 gb of data .
****ing htc! (sorry to say that because i loving my diamond and other devices so much)
Click to expand...
Click to collapse
Mine did work when i have a fully charged battery, but when the power dropt it just died again

w3pp3 said:
Mine did work when i have a fully charged battery, but when the power dropt it just died again
Click to expand...
Click to collapse
i read your problem....
but now iam really going crazy, now i arrived @ home from work....
now what do you think... NOTHING works now... it looks that i have a anti gsm antenna @ my home
but i think its a software issue... i try now to reflash my original tmobile stock software with radio ( i do this 1 month ago because i became this error now for the second time)
hope it helps - i will post the results....

it IS a software issue!
now after reflash to original stock 1.37 + stock radio 1.03 , gsm connection works immediatly!!!!
hope this info help other poor guys which have this ****ing !!BUG!!
greetz

Congrattulations )
Im still waiting for HTC too fix mine : P

reception lost in my room

Hey...so this is my story. i tried to figuere out if somebody got the same probs but couldnt find it anywhere so i am just asking all of you thanks...
SO here we go...
My Provider is E-plus and i live in Stuttgart (germany)
I got my HTC kaiser about 6 month ago and it always worked well and i didnt have any problems. I had reception everywhere (also in my room). The regular Windows mobil was installed i didnt change anything.neither the rom version nor the radio rom. so everything was how i got it in the beginning.
Then i have flashed the new version of Windows mobile 6.1 (downloaded from the HTC homepage,sorry i dont now the specific name and which radio version it was) but from that moment on my mobile phone didnt reciept in my room anymore. There was always the "!".
Then i have tried:
- to look for reciept manually (it found different providers but couldnt connect with those
- i ve tested my sim card with other phones and it worked
- i have tested different Roms and radio roms such as:
original rom
L26_KaiserDiamond_V9 (englisch)
Dutty's WM6.1 Hybrid v2 5.2.19716/5.2.19700 (englisch)
German clean WM6.5◄ by ChrBeck (CHome)
- different radios such as:
KAISER Radios These Radios were ripped from Kaiser WM6.1 ROMs.
1.65.14.06
1.65.20.29
1.65.16.25
1.65.17.56
1.70.19.09 -
1.71.09.01 -
lots of 1.58.XXXXX and 1.64.XXXX
and even more
--> they all work while i am not in my room. but non of them worked in my room...and it did before.
then i decided to use the original version again which i did
i ve installed Rom:
CE OS 5.2.1620(Build18125.0.4.2)
1.56.407.3
Radiorom: 1.27.12.32
What happened now is that it shows that it got full reception but the phone still doesnt work in my room. but i can use the UMTS date transmission --> i can use the Internet
as soon as i am outside and soft reset the mobile phone it works perfectly.
i am not shure if i have listed everything that is important but if somebody could help me with that i would be pretty cool because a mobile which is just working half of the time isnt very usefull...
any ideas? thanks

Seems like your phone sees the signal seded by the Mobile Operator to you but it isn't able to send a signal back to tell the operator that it is there. Seems like something causes your internal Antenna of the phone to be not as powerfull as at the beginning. Maybe you installed a Radio that has lowered the power and no Radio will rise it again cause the radio things you are in a power restricted area.
In my Charmer I was able to get the power of the radio unit 10% up but the trick doesn't seem to work for the Kaiser. Maybe an user with more Kaiser knowlege can help you better.

Anything new in your room (or nearby) that might be causing interference?

thats what i thought first too...because i ve installed wireless power point...but i have deinstalled them in my room again and it didnt work neither

"Offline" and stability issue, ROM / Radio recommendation?

Hello all,
I have a Htc Touch Diamond (Rom 2.03.404.3 NLD, Radio 1.11.25.01) that I use with the GSM protocol only (I have 3g disabled for power consumption reasons).
My Diamond has the following problems:
- When I pull the USB/Power cable, sometimes the background illumination stays ON. I am unable to switch it off without performing a soft reset.
- Very often it appears that the phone is simply offline even though it displays full signal strength. It doesn't respond to incoming calls and I can't make any outgoing calls. I have to switch the transmitter OFF and ON again in the Comm Manager application before I can use the phone again.
This is a massive p.i.t.a: Sometimes I have been offline several days without knowing it !!! My phone is an unreliable piece of crap and I'm desperate to make it work more reliably. I don't need too many bells and whistles, I just want it to work. I think it is a power management or radio issue. I therefore installed HardSPL and a newer radio version (1.11.25.01) but the situation has not improved.
I am grateful for a tip on which ROM/Radio could solve these reliability issues!
Thanks in advance,
Arthur

Wow, very strange issues!
First, flash this radio : http://www.megaupload.com/?d=USMNPAS1
Second, flash this ROM with MTTY method : http://forum.xda-developers.com/showthread.php?t=521941 (It's the best ROM with WM6.1/TF3D 2.1, you can't find more stable)
You have to know too that : when you flash a radio, you have to change too a DLL (rilphone.dll) in WM to link up both. Gen.Y ROM includes 1.13 rilphone, so you will more performance & stability with the 1.13 RADIO.
If yours problems continue, it's maybe a hardware problem, or maybe a SIM problem ? (i already seen SIM card who makes a phone do many bugs)
Hop i've been useful

Thanks, I'll try that.