hi again..
now i did something too badly..
i tried to flash touch it 2.0,- it did not worked.
then i flashed it back to official wm5, it worked.
here, i did something-i do not know what, but next hard reset, my pda stucked in bootloader mode:|
(and the bootloader was not tricolor, just green and black (??) )
next HR:
since then it is tricolor..
i tried hard reset, soft reset, turn it to bootloader mode, and flash it again with official:
HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe
RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship.exe
they said:
error 300
the ruu cannot be used for your pda, get newer ruu.
??
i flashed that roms twice yesterday..
so i did something too badly
please help me
nh not a brick to me
just flash the padviet rom
or the touchit
boh are fine and will deal the problem
it asks a password:|
the official roms: error 300: invalid update tool, get newer one, but where?
at htc.com, that is the only one update tool and it doesnt works!
3.5.*.*
help help help me please
hi everyone
i tried to update rom but at the end of the process...UPDATE ERROR
I tried to recover but nothing...
Now my wizard is blocked in a very strange situation: bootmood (red green blue screen) is flashing turning on and off...
please help me! what can i do???
felixflo said:
hi everyone
i tried to update rom but at the end of the process...UPDATE ERROR
I tried to recover but nothing...
Now my wizard is blocked in a very strange situation: bootmood (red green blue screen) is flashing turning on and off...
please help me! what can i do???
Click to expand...
Click to collapse
As long as its getting into Bootloaders (RGB) nothing to worry.
Most probably you have a weak or dead battery,recharge it fully and flash the official stock rom in Bootloaders,it'll recover back,but if the battery is gonner,get a new battery.
thx
now when i try to flash the rom...ERROR invalid update tool
....
Download it
Down load a RUU from the TNT's ROM i think is the better Ruu for wizard but search it men or try the Mun's one!
somme help please
hello i have download X1_HardSPL.exe
i have execute it
i connect the usb after remove batterie and click down volume and power
the software update my phone since 11 % and nothing
now my phone is blocked in attemps for flash
how can i deblock and hvae a real new rom whithout original bug
please help me thank's
Please search or read the faq stickies.
try flashing orig rom by bootloader-mode.
if no than
try flashing orig rom by flashcard.
if no too
you have a problem.
hi guys
I installed rom 6.5 official , it was working fine , after that I run relocker and after soft reset I cannot use my phone it stock on the black screen !
please help me ! I tried to install another rom but it stock on 0% and say error 294 invalid vendor id
i cannot re unlock my phone also !
I runned TopazSPLRelocker_SPL133
I was using Hard SPL 1.83
Please help me !
helpppppppppppppppppppppp
somehow i change the HardSPLWrapper from 1.56.OliNex to 1.14.OliNex.
then my HD stoped working and its show me the "red,green,blue,white" screen with this MSG :
BLAC100 300
SPL-1.14.0000
MicroP-BlackStone (LED) v6
Upgreade ROM code error please try again.
Click to expand...
Click to collapse
if i connect the cable its show me USB.
when i try to update the ROM version or update the SPL to 1.56.OliNex. it show me the MSG in the attachment.
plz tell me what to do. this is the second day without my HD. + im in philippense those days i dont know where to fix it.
thanx
Hard reset.
Try some hard reset and then do flash again to higher hard spl 1.56.
Rom.
If the hard reset doesnt help flash with stock rom and do te hard spl again.
mcnaget said:
If the hard reset doesnt help flash with stock rom and do te hard spl again.
Click to expand...
Click to collapse
thnx for ur efforts.
but still the Hard reset doesnt help.
i tried to flash the stock rom, but same problem.
its give me a MSG : 00028002 not allow
yabdoo said:
thnx for ur efforts.
but still the Hard reset doesnt help.
i tried to flash the stock rom, but same problem.
its give me a MSG : 00028002 not allow
Click to expand...
Click to collapse
Not sure if it helps, but maybe you can try flashing stock ROM using USPL?
yabdoo said:
thnx for ur efforts.
but still the Hard reset doesnt help.
i tried to flash the stock rom, but same problem.
its give me a MSG : 00028002 not allow
Click to expand...
Click to collapse
yes try USPL 2.5
ill go through it with you
CaponiND + jigners
thank you.
i tried the USPL 2.5
but still it show me spl-1.14.
and after updating the ROM.
its stuck on the setup screen : tap the screen to setup your device.
+ something wrong with the screen color.
Boot.
Remove battery for some time,try to get in to boot loader from device not from windows,restart windows if there are any usb connections or processes in windows that prevent from flashing. Insert usb cable in different usb port. Try on a different pc.
the boot problem is finished. after i change the USB port.
i update to SPL-1.56, then i update the ROM.
but still its stuck on :
tap the screen to set up your windows phone.
when i tap the screen, the screen comes bright. but nothing change.
and its vabirate for a second. from time to time while its on the set up screen.
thanx mcnaget but still i need a help.
Battery.
Remove the battery for 24 hours and try again.
24 hours more
ok ill try, thnx alot.
Battery.
I have read in some post that this could help but if it is a hardware damage than none of this would help.
I wish you best of luck to bring him back to life.
Regards.
thanx
still stuck at set up screen.
i notice some thing when i update, usually it show me in the box :
verify that you want to update the ROM version :
from :
Image Version : "the previous ROM"
to :
Image Version : "the next ROM".
but now its show nothing on "From": Image Version.
just show mo the Image Version of "TO".
See the attached Pic.
Rom.
Have you try manualy to go to boot loader.If you already have olinex 1.56 try some different stock rom.
yabdoo said:
but now its show nothing on "From": Image Version.
just show mo the Image Version of "TO".
Click to expand...
Click to collapse
This is normal behavior when flashing from/to custom made ROMs, at least with USPL (never tried HSPL )