stock on boot screen page after relocking ! help ! - Touch Diamond2, Pure Q&A, Help & Troubleshooting

hi guys
I installed rom 6.5 official , it was working fine , after that I run relocker and after soft reset I cannot use my phone it stock on the black screen !
please help me ! I tried to install another rom but it stock on 0% and say error 294 invalid vendor id
i cannot re unlock my phone also !
I runned TopazSPLRelocker_SPL133
I was using Hard SPL 1.83
Please help me !

helpppppppppppppppppppppp

Related

help again please i think i bricked my phone:(

hi again..
now i did something too badly..
i tried to flash touch it 2.0,- it did not worked.
then i flashed it back to official wm5, it worked.
here, i did something-i do not know what, but next hard reset, my pda stucked in bootloader mode:|
(and the bootloader was not tricolor, just green and black (??) )
next HR:
since then it is tricolor..
i tried hard reset, soft reset, turn it to bootloader mode, and flash it again with official:
HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe
RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship.exe
they said:
error 300
the ruu cannot be used for your pda, get newer ruu.
??
i flashed that roms twice yesterday..
so i did something too badly
please help me
nh not a brick to me
just flash the padviet rom
or the touchit
boh are fine and will deal the problem
it asks a password:|
the official roms: error 300: invalid update tool, get newer one, but where?
at htc.com, that is the only one update tool and it doesnt works!
3.5.*.*
help help help me please

Xperia problem with booting up

Hi ,i have put ruusigned_072stockspl ( i rename it to kovsimg.nhb ) image into my card and bot it up , but it says loadin ..... all the time , and i have bean waiting about 4 hours
what shall i do to make these work
did it flash? i hope not because if it did flash you will be most likely hanging in bootloader ALL the time you start your phone.
flash your stock spl only with RUU over windows...
if that is the case search for mTTy and the required instructions.
they can be found in the hard spl thread.
it was something with 'set 14' and 'set 16'.
regards
yes i'm stucked in botloader every time when i turn on the phone , and mtty doesn't work , it says : USB port cant open
Try to flash a stock rom
i used mtty tool and i fixed boot up screen , it s ok now
thanks guys
omg , it looks like i havent fix the problem complitely , i just managed to turn the phone on without going automaticli into bootloader , and now it doesn't want to flash custom rom , it stuck's into white sreen with loading on it
That could be because you messed up the spl. Try to reinstall the hard-spl. If you manage to do that your problem should be solved
Finaly i made it work after doing hard spl just as recomended , at first it didn't want to do a hard spl but after 1 hour i managed to make it work , and than i flashed custom rom and now it works great
Thank's guys for your help!!

Help : problem after updatin d ROM.

somehow i change the HardSPLWrapper from 1.56.OliNex to 1.14.OliNex.
then my HD stoped working and its show me the "red,green,blue,white" screen with this MSG :
BLAC100 300
SPL-1.14.0000
MicroP-BlackStone (LED) v6
Upgreade ROM code error please try again.
Click to expand...
Click to collapse
if i connect the cable its show me USB.
when i try to update the ROM version or update the SPL to 1.56.OliNex. it show me the MSG in the attachment.
plz tell me what to do. this is the second day without my HD. + im in philippense those days i dont know where to fix it.
thanx
Hard reset.
Try some hard reset and then do flash again to higher hard spl 1.56.
Rom.
If the hard reset doesnt help flash with stock rom and do te hard spl again.
mcnaget said:
If the hard reset doesnt help flash with stock rom and do te hard spl again.
Click to expand...
Click to collapse
thnx for ur efforts.
but still the Hard reset doesnt help.
i tried to flash the stock rom, but same problem.
its give me a MSG : 00028002 not allow
yabdoo said:
thnx for ur efforts.
but still the Hard reset doesnt help.
i tried to flash the stock rom, but same problem.
its give me a MSG : 00028002 not allow
Click to expand...
Click to collapse
Not sure if it helps, but maybe you can try flashing stock ROM using USPL?
yabdoo said:
thnx for ur efforts.
but still the Hard reset doesnt help.
i tried to flash the stock rom, but same problem.
its give me a MSG : 00028002 not allow
Click to expand...
Click to collapse
yes try USPL 2.5
ill go through it with you
CaponiND + jigners
thank you.
i tried the USPL 2.5
but still it show me spl-1.14.
and after updating the ROM.
its stuck on the setup screen : tap the screen to setup your device.
+ something wrong with the screen color.
Boot.
Remove battery for some time,try to get in to boot loader from device not from windows,restart windows if there are any usb connections or processes in windows that prevent from flashing. Insert usb cable in different usb port. Try on a different pc.
the boot problem is finished. after i change the USB port.
i update to SPL-1.56, then i update the ROM.
but still its stuck on :
tap the screen to set up your windows phone.
when i tap the screen, the screen comes bright. but nothing change.
and its vabirate for a second. from time to time while its on the set up screen.
thanx mcnaget but still i need a help.
Battery.
Remove the battery for 24 hours and try again.
24 hours more
ok ill try, thnx alot.
Battery.
I have read in some post that this could help but if it is a hardware damage than none of this would help.
I wish you best of luck to bring him back to life.
Regards.
thanx
still stuck at set up screen.
i notice some thing when i update, usually it show me in the box :
verify that you want to update the ROM version :
from :
Image Version : "the previous ROM"
to :
Image Version : "the next ROM".
but now its show nothing on "From": Image Version.
just show mo the Image Version of "TO".
See the attached Pic.
Rom.
Have you try manualy to go to boot loader.If you already have olinex 1.56 try some different stock rom.
yabdoo said:
but now its show nothing on "From": Image Version.
just show mo the Image Version of "TO".
Click to expand...
Click to collapse
This is normal behavior when flashing from/to custom made ROMs, at least with USPL (never tried HSPL )

please help me in updating

hi
i just download spl-1.30 olinex
and everything going good when i try to flash any rom its working good , but when i try to flash the orignal one from HTC offical website its not working and give me this error
PS0C-DIAM STAGE_PVT V0X32
upgrade rom code error
i try to do every thing but nothing is work , even i try to push the power + volume key , but still not working
and please recominde ROM for me
please help me
Many thanks and best rgeards
Try flashing the SPL in my sig first, then flash the ROM.
solved thank you supersanj

Help plzz >> My HD7 stuck on htc screen !?

itried to flash a costum rom and idid the DFT hspl and star to flashing the rom every thing was ok until somthing wrong and wasnt complet the flashing and get an error >> then when i restart the phone it stuck on the htc screen >> and when iflashing another roms i get error and ifount my boot loader screen on first line
pd9*** although those "***" was 9100 befor this proplem ... some say 2 me u need a radio rom,,, but idont know what imust do ..
so .................. help ???!!
is your bootloader OK? i mean your device is not bricked, right?
Will your devise go into bootloader mode? Sounds like its missing a rom or you may have bricked your phone! What were the specs on your phone before you tried to flash?
Can you enter bootloader? If yes did you install R/H SPL before flashing?

Categories

Resources