itried to flash a costum rom and idid the DFT hspl and star to flashing the rom every thing was ok until somthing wrong and wasnt complet the flashing and get an error >> then when i restart the phone it stuck on the htc screen >> and when iflashing another roms i get error and ifount my boot loader screen on first line
pd9*** although those "***" was 9100 befor this proplem ... some say 2 me u need a radio rom,,, but idont know what imust do ..
so .................. help ???!!
is your bootloader OK? i mean your device is not bricked, right?
Will your devise go into bootloader mode? Sounds like its missing a rom or you may have bricked your phone! What were the specs on your phone before you tried to flash?
Can you enter bootloader? If yes did you install R/H SPL before flashing?
Related
hi again..
now i did something too badly..
i tried to flash touch it 2.0,- it did not worked.
then i flashed it back to official wm5, it worked.
here, i did something-i do not know what, but next hard reset, my pda stucked in bootloader mode:|
(and the bootloader was not tricolor, just green and black (??) )
next HR:
since then it is tricolor..
i tried hard reset, soft reset, turn it to bootloader mode, and flash it again with official:
HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe
RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship.exe
they said:
error 300
the ruu cannot be used for your pda, get newer ruu.
??
i flashed that roms twice yesterday..
so i did something too badly
please help me
nh not a brick to me
just flash the padviet rom
or the touchit
boh are fine and will deal the problem
it asks a password:|
the official roms: error 300: invalid update tool, get newer one, but where?
at htc.com, that is the only one update tool and it doesnt works!
3.5.*.*
help help help me please
hi guys
I installed rom 6.5 official , it was working fine , after that I run relocker and after soft reset I cannot use my phone it stock on the black screen !
please help me ! I tried to install another rom but it stock on 0% and say error 294 invalid vendor id
i cannot re unlock my phone also !
I runned TopazSPLRelocker_SPL133
I was using Hard SPL 1.83
Please help me !
helpppppppppppppppppppppp
Hi ,i have put ruusigned_072stockspl ( i rename it to kovsimg.nhb ) image into my card and bot it up , but it says loadin ..... all the time , and i have bean waiting about 4 hours
what shall i do to make these work
did it flash? i hope not because if it did flash you will be most likely hanging in bootloader ALL the time you start your phone.
flash your stock spl only with RUU over windows...
if that is the case search for mTTy and the required instructions.
they can be found in the hard spl thread.
it was something with 'set 14' and 'set 16'.
regards
yes i'm stucked in botloader every time when i turn on the phone , and mtty doesn't work , it says : USB port cant open
Try to flash a stock rom
i used mtty tool and i fixed boot up screen , it s ok now
thanks guys
omg , it looks like i havent fix the problem complitely , i just managed to turn the phone on without going automaticli into bootloader , and now it doesn't want to flash custom rom , it stuck's into white sreen with loading on it
That could be because you messed up the spl. Try to reinstall the hard-spl. If you manage to do that your problem should be solved
Finaly i made it work after doing hard spl just as recomended , at first it didn't want to do a hard spl but after 1 hour i managed to make it work , and than i flashed custom rom and now it works great
Thank's guys for your help!!
My friend is having G1. He install Custom ROM ( Cyanogen Mod ROM V.05) without access Root .. and now His phone won't start .. is there any solution ? He didnt know He have to root it ..
tried everything unplugging battery... and also didnt do nandroid backup or anything .. any Help ?
On screen it shows update but whenever trying to update it its fails & says update terminate ..
screen shows :-
dreaimg.nbh - Fail
Radio_v2 -
bootloader -
recovery -
boot -
splash1 -
system -
userdata -
Update terminate
update fail
put the DREAIMG.nbh on the root of the card and load it.
Thanks bro but ... went 2 a shop today , and he installed ROM paid 30 bucks .. but got another problem .. today was trying 2 install CaNNoN202 Complete Eclair (v2.2.1) ... 1st i root his Phone - then i back up everything using nandroid back up - then i install danger spl and Custom ROM Later i wipe/factory reset and installed Danger spl and CUstom ROM .. it was taking so long time .. all most 35 Minutes so i removed the battery and later i just nothing no menu options nothing at all .. tried everythin menu + power button every buttons but just d screen and says G1 T Mobile thats it .. cant do nandroid back up or anything ? Please tell me ... Thanks
maheshpatel said:
Thanks bro but ... went 2 a shop today , and he installed ROM paid 30 bucks .. but got another problem .. today was trying 2 install CaNNoN202 Complete Eclair (v2.2.1) ... 1st i root his Phone - then i back up everything using nandroid back up - then i install danger spl and Custom ROM Later i wipe/factory reset and installed Danger spl and CUstom ROM .. it was taking so long time .. all most 35 Minutes so i removed the battery and later i just nothing no menu options nothing at all .. tried everythin menu + power button every buttons but just d screen and says G1 T Mobile thats it .. cant do nandroid back up or anything ? Please tell me ... Thanks
Click to expand...
Click to collapse
See my avatar for full details of the situation you are now in.
DangerSPL should always be installed through fastboot, not recovery.
Any Help bro ? i know but **** just happened .. & i dont know difference between fastboot & recovery ...
maheshpatel said:
Any Help bro ? i know but **** just happened .. & i dont know difference between fastboot & recovery ...
Click to expand...
Click to collapse
There's nothing you can do now except attempt a JTAG repair.. Instructions are here if you feel up to it:
http://forum.xda-developers.com/showthread.php?t=591048
Hi guy's...
I need you help please.
So I have this phone for a while and sort of got bored with the same look everyday and thought I should change the rom... Was looking for the most compatible one for this phone and I had to do some steps before flashing the new rom. I got to the point where I need it to flash the custom recovery and there I got in trouble.
I was using SP Flash Tool v5.1628... but after the flashing I was thinking let me quick turn the phone on to check something, and I see that the phone won't turn on ... and there I got mad... my fault of course but tried to flash all stock roms for this only model... Starting with: 0PM1100_A32MG_DUG_K44_SENSE53_htc_europe_1.01.401.8_Radio_MOLY.WR8.W1315.MD.WG.MP.V62_P4_Release
Then:
0PM1100_A32MG_DUG_K44_SENSE53_htc_asia_1.03.707.1_Radio_MOLY.WR8.W1315.MD.WG.MP.V62_P4_Release
After:
0PM1100_A32MG_DUG_K44_SENSE53_htc_europe_1.06.401.1_Radio_MOLY.WR8.W1315.MD.WG.MP.V62_P4_Release
And the last:
0PM1100_A32MG_DUG_K44_SENSE53_htc_europe_1.07.401.1_Radio_MOLY.WR8.W1315.MD.WG.MP.V62_P4_Release_2_4
Nothing happened but all worked till the HTC logo loop with the message at the bottom : Tool DL Image Fail.
The phone is rebooting itself all the time and can't turn it off except if I format the phone with SP Flash Tool.
Can someone please help me I trully need this phone and don't want any custom rom anymore just the stock and a working phone.
Thank's a lot...