Related
Hi All,
I bought HTC Tytn II recently... It's rock.....
But i am very disappointed with the earphone quality of HTC... No Bass at all.... I am not saying mp3 playing quality is bad... I tried my motorola BT stereo headset and it gave me fantastic output with heavy bass..... So the quality of my HTC earphone is bad...
I found several earphones on HTC website.... can you please help me to find out an excellent HTC earphone which can give full Bassy effects.... or any other brand which haves mini usb port...... Dont want converters please.......
Thanks.
pda_crazy said:
Dont want converters please.......
Click to expand...
Click to collapse
Why not? You are unlikely to find a decent pair of USB earphones IMHO.
I'd get a small adapter and buy some sure earphones for the best possible sound.
don't mean to hijack the thread but can anybody recommend a good bluetooth stereo headset? i want one that will be good with music and also allow me to make calls.
I am particularly looking for an in ear type earphone or a unit that allows me to use my own ear buds.
I've got the i-Tech Clip Radio (http://www.expansys.com/p.aspx?i=145553). Works well with the kaiser, got play/pause, next/prev, volume, and call buttons, bulit in FM radio, and allows you to plug your own earphones in as it has a 3.5 jack.
How is this unit for bass?
Also it looks just like the htc S100, did HTC rebrand it?
I listen to alot of dance music, and with Sony's EX-71s it does me fine!
Yeh, the S100 is HTC's rebranded version of the non FM radio version!
I also have the iTech clip (excellent unit with medium audio quality) as it can handle calls and lets you use any 3.5mm jack units you have but you have loads of cables about (use my B&O earbuds on that).
For genaral use and if I want to anser a call I use the Promate PM-2006 BT stereo headset as it is a halfway sized headphone with good audio quality and in call holding.
But for sheer audio enjoyment, I use my Creative CB2530, absolute bliss and can put most Hi-Fi's to shame.
SOZ, probably not what the thread starter asked for but WHO is gonna produce a GOOD set of headphones terminated in a mini usb? You will need the converter or BT (no converter at all!)
Every BT unit I have works seamlessly, no clicks, no splutters, no bad audio with my 'out of the box' non-carrier HTC TyTnII.
Damn, its either the beer or I should have been a salesman! Smiles.
There aren't any "best" headphones without using an adapter. If you want the best you'll need to spend you're looking at the Shure SE530 or go custom which is around $1000. It all depends on your budget.
ive got the Shure e4c's connected through an adapter and i can say you can't get better sound.. its so crystal clear, it sounds better than live people in front of you talking
ok, I've something else to add.....well asK
Is there any bluetooth stereo heaphones (with very good sound quality but aren't humongous so as to make me look like a Martian ) that can pair with two devices at once?
For example, I have two phones which support A2DP and I use one as my music phone (Nokia N93i) but also use the TYTN 2 as my business phone. What I want is to be listening to my Nokia N93i through the earphones, and If my TYTN 2 rings, the music pauses so I can speak to the caller on the TYTN 2 then revert back to listening to music back on the N93i.....
.....is this even possible?
LeShin said:
ok, I've something else to add.....well asK
Is there any bluetooth stereo heaphones (with very good sound quality but aren't humongous so as to make me look like a Martian ) that can pair with two devices at once?
For example, I have two phones which support A2DP and I use one as my music phone (Nokia N93i) but also use the TYTN 2 as my business phone. What I want is to be listening to my Nokia N93i through the earphones, and If my TYTN 2 rings, the music pauses so I can speak to the caller on the TYTN 2 then revert back to listening to music back on the N93i.....
.....is this even possible?
Click to expand...
Click to collapse
Well yes to the pairing to two sperate devices, and no to the 'very good sound quality but aren't humongous'. The Promate PM-2006 headset is a 'medium' sized' 'medium to good quality' folding headset with mike. Pair it to both units then disable the function you don't want it to do on whichever phone (under BT settings). It will halt audio and answer the call from the other unit. These headphones were primarily developed to use with a BT mp3 players with capability to connect to your mobile phone but WM phones do both!
Using 2 devices at once with Bluetooth stereo headphones
LeShin said:
ok, I've something else to add.....well asK
Is there any bluetooth stereo heaphones (with very good sound quality but aren't humongous so as to make me look like a Martian ) that can pair with two devices at once?
For example, I have two phones which support A2DP and I use one as my music phone (Nokia N93i) but also use the TYTN 2 as my business phone. What I want is to be listening to my Nokia N93i through the earphones, and If my TYTN 2 rings, the music pauses so I can speak to the caller on the TYTN 2 then revert back to listening to music back on the N93i.....
.....is this even possible?
Click to expand...
Click to collapse
Look at the Jabra BT8010. They're a little large, but have the advantage of using it in mono or stereo mode, as well as connecting to 2 devices simultaneously.
Incidentally, Seidio makes earphones that end in the proprietary htc mini-usb format. Haven't tested them out, but they're the only other ones i know of that don't need a converter.
Another vote for iTech Clip Radio. Works awesome with my Ultimate Ears Super fi 5 Extended Bass buds.
I bought Kyocera from here: http://www.buy.com/retail/product.asp?sku=204239053&loc=111&pageFormat=20&rs=1&#cReviews
The best headphones I ever bought and have the most functionality. The only problem that some people might have is the look and size of the headphones. I have not charged the headphones for a month now and still running on standby.
- TKN
has anyone tried any Sony bluetooth stereo headset?
LeShin said:
ok, I've something else to add.....well asK
Is there any bluetooth stereo heaphones (with very good sound quality but aren't humongous so as to make me look like a Martian ) that can pair with two devices at once?
For example, I have two phones which support A2DP and I use one as my music phone (Nokia N93i) but also use the TYTN 2 as my business phone. What I want is to be listening to my Nokia N93i through the earphones, and If my TYTN 2 rings, the music pauses so I can speak to the caller on the TYTN 2 then revert back to listening to music back on the N93i.....
.....is this even possible?
Click to expand...
Click to collapse
I think it might be possible using the Sony Erickson BT Earphone Stereo set. Check FleaBay... They got them cheaper than anywhere else. ( BT phone would have to be close to you, just disable the bluetooth on N93i, however The Sony Er unit has a 3.5 jack that can be plugged into the N93i, just marry the TytnII to the bluetooth)
If you marry to phones BT to the headset, and if you get a call from one while listening to music from the other, you will hear both the caller voice and the music at the same time. Jabra is one headset that I know of that can accept two devices, however when tried, I heard the device playing music however the music volume was very low while I talked on the phone. Not a great setup but might do the trick.
Hi All,
I'm wanting to use my Diamond in the car to replace both my old iPod and sat-nav, while still having phone functions available. There are a few things I'm not happy with, so I thought I see what other people are doing.
I have a car head unit with a direct 3.5mm line-in, which used to have the iPod on the end. The Diamond works fine plugged into this through an ebay 3.5mm\USB adaptor.
If I plug the 12v>USB charger in, I get a whine over the audio - not a big problem, it's just a ground-loop, so I'll stick an isolating transformer in-line.
The main problem I have is switching between the internal speaker and the external output. If I want to have the radio on, rather than MP3, I have to unplug the adaptor, and plug the charging cable in direct, so that I can keep the battery charged - not ideal. This way I can hear the TomTom voices through the internal speaker, but it seems wrong to have to swap leads this way.
The other main problem is if I have MP3 and TomTom all through the stereo, and I get a call, I can hear the call over the stereo, but can't speak, as the Diamond is expecting an external microphone.
I guess what I need is a utility to force only the internal microphone to be used, and to allow me to force the internal speaker when I want to use the radio. It there such a thing?
I think one of these car holders has an option to plug in charger and usb-3.5mm jack adapter at the same time....
http://www.dsldevelopments.com/brodit/Holder/HTC+Touch Diamond-Brodit-Holder.asp
If i had the skills i'd try to figure out a hack to pause/mute the mp3 and mute satnav when in a call... but I don't.
That's not the problem - I can plug in the charger and 3.5mm audio at the some time, but that redirects all the audio to the car stereo, and disconnects the mic. Removing the adaptor and plugging in just the charger enables the microphone, but all my MP3s then are played through the internal speaker.
What I need is a utility to force the internal microphone to be used _all_ the time, and let me choose when to use the internal speaker when a headset is detected.
I don't suppose anyone knows how the Diamond recognises a headset? Is there a resistor link across a couple of the pins in the 11pin connnector? I'm just thinking I could make up a cable with a switch to break that contact, and 'virtually' disconnect the headset when I want the radio, or need the microphone active during a call.
You could try this program. It seems to be a virtual switch between the earpiece and external speaker. I use it a a solution for skype and other voip programs that only work through the external speaker, but the works the other way as well.
headset instaled but need phone mic allways enable
Hello,
Kaysee_sw said:
The other main problem is if I have MP3 and TomTom all through the stereo, and I get a call, I can hear the call over the stereo, but can't speak, as the Diamond is expecting an external microphone.
I guess what I need is a utility to force only the internal microphone to be used, and to allow me to force the internal speaker when I want to use the radio. It there such a thing?
Click to expand...
Click to collapse
I have the same issue of kaisee.
I use the diamond as mp3 player in my car stereo (aux-in) and i need the mic allways available to use the phone without disconect the usb or audio plug.
In my old magician this worked just fine becouse the mic was allways available.
Is the .exe posted by dctech the answer(thanks man) ? has anybody tested ? is it reliable or there is another solution?
Thanks
You need a proper bluetooth car kit to allow this. Parrot ones are very good. If you want to listen to music as well as phone calls and sat nav i would suggest that you get one with both handset and A2DP bluetooth profiles. There is a workaround app you can use to get music through a car kit with just a handset or headset profile but the quality is mono and very poor
There is one reason why I have never used my Kaiser as a music/media player - the lack of a headphone jack. I am now look at upgrading to a Rhodium, but again HTC fails to include the most basic of requirements. pfff
I know that I can get a headphone adaptor, or even use bluetooth, but the problem for me is that whenever the usb plug falls out, as it invariably does, or the bluetooth signal drops, I instantly upset everyone within 100m by blasting crappy tinny sounding music at them through the phone speaker. Of course, 3.5mm jacks don't have the same habit of just falling out.
Therefore, is there any way that I can set up the phone so that when music or media is playing (usually through Coreplayer) the phone speaker is disabled?
Thanks
Plug in headphones? Otherwise if your not using the speakerphone how would you hear anything?
I've used a 3.5mm to mini usb cable and adapter, they both worked fine. I liked the cable better since i worried less about it breaking in my pocket. Its not the exact same one i am using right now but this one is only a penny.
http://www.amazon.com/Stereo-Headset-Speaker-Adaptor-phones/dp/B0013URK04/ref=pd_cp_e_3
but therein lies the problem - because the headphone output is mini-usb, it is always at risk of falling out (far more so than a 3.5mm jack).
Yea life is tough that way. I've yet to have anything just fall out of my mini usb port myself.
I suppose you could write a script that detects if anything is plugged in to the usb port ala Audio Booster, and auto mute if nothing is detected. But i don't think i've seen an auto mute app or anything like that.
Here's a kind of work around. I found this doing a google search for Auto Mute for PPC. http://www.pocketpcfreeware.com/en/index.php?soft=277
You could fire it up set it for an hour or so and listen away w/out fear, in theory at least.
that's a great idea - I'll give it a go. Thanks for taking the time.
Hope it works for ya! I can't get to the site and test it myself. I'm at work
Looks like the link is broken, but the idea is worth spending some time with google for
Damn.
This one says WinMo 5 ver 1.1, but i would think WinMo 6 is backward compatible. What about this one?
http://handheld.softpedia.com/get/System-Utilities/Enhancements/Automatic-Mute-WM5-36048.shtml
I have searched everywhere and can't seem to find a answer to this...
I use a phone cradle in the car, using my topaz as my music player, connecting my phone to my car stereo with a male-male 3.5mm audio jack.
I want to be able to steam music via bluetooth from any other compatible phone / device to my phone, meaning I don't have to trail cables everywhere when a passenger wants to play something.
I would have thought this to be a simple-ish thing to setup but cannot find any information on how to do it. Is it even possible, and where would I start if it is?
I also want to use my on-board mic when the headset is plugged so I can have call audio over car speakers, although iv been led to believe this isn't possible because of hardware reasons, can anybody clarify that?
Apologies if this is in the wrong forum, not really sure where it should have gone.
If I understand you correctly, you want to stream music TO your phone over BT from another device? Not possible.
For hearing call over speakers and using mic, you need to get the M-F w/built in mic.
I too don't think it will be possible to stream music from another device to your phone except if you transfer the entire music mp3 file via bluetooth to your device and then play it from there.
Regarding the possibility of using the device's microphone whilst using the car speakers for sound, again I'm afraid I don't think this is possible. I have a similar set-up to you in that my TD2 is connected to an FM transmitter which also charges my TD2 at the same time in a nice cradle. The TD2 thinks it is connected to a headset when cradled. The microphone is inactive in this state which is a shame as it would have made a good hands free system if it were to be active....
mitsi said:
I too don't think it will be possible to stream music from another device to your phone except if you transfer the entire music mp3 file via bluetooth to your device and then play it from there.
Regarding the possibility of using the device's microphone whilst using the car speakers for sound, again I'm afraid I don't think this is possible. I have a similar set-up to you in that my TD2 is connected to an FM transmitter which also charges my TD2 at the same time in a nice cradle. The TD2 thinks it is connected to a headset when cradled. The microphone is inactive in this state which is a shame as it would have made a good hands free system if it were to be active....
Click to expand...
Click to collapse
I use this set up as well. You just need the cable with the built in mic.
My RF Transmitter has a male plug, So I found the HTC cable that has the HTC USB to Female with built in mic. This is my basic set up.
Bruce Inman said:
I use this set up as well. You just need the cable with the built in mic.
My RF Transmitter has a male plug, So I found the HTC cable that has the HTC USB to Female with built in mic. This is my basic set up.
Click to expand...
Click to collapse
That set up looks great Bruce, but I don't want to be fiddling about plugging in so many cables with so many wires visible. Brodit does something similar too, all in a cradle with an extended wire so you would be able to hide all the cables....
Hi everyone, I just recieved my Sony MW600's in the mail and charged it up and paired it to the Focus. http://www.mobilecityonline.com/wireless/store/productdetail.asp?productid=25845
This is by far the best headphones I've used next to the HBH-IS900's I've owned the past 2 years. I would've gotten another pair of the IS900's but didn't want the propitary charging port after seeing the MW600's are micro usb too. Pairing was easy and all the music controll functions work great. The headset has it's own volume adjustments too, but it's touch sensitive which you have to watch out when your holding it by the sides. You can skip tracks or pause music with no problems. Now for watching video they of course don't work because there is a problem with Zune sending sound to the headset, but the controls still work. The FM radio function works pretty awesome, better than my cars tuner. To bad you can't store station pre-sets. Only other thing is finding a place to clip it. Other than that it is a very good buy.
I have it - I second it as one of the best devices for bluetooth.