Hi, flashed many many times but today when trying to flash the latest NRG ROM when I go into bootloader I am getting problems.
First of all when I go into bootloader it quickly flashes a message saying no image file or something.
Then HSPL 1.56 Olinex it doesnt show USB when I connect via USB just sticks at serial.
When connected to PC the PC just says USB device not recognized.
So I am unable to flash, I am at a loss to what to do???
I have tried different PCs, different cables, all have the same problem.
The phone boots into ROM OK and works fine, and then when I connect via USB it activesyncs fine. I really dont understand this, can anyone help?? PLeeaase as I want the new ROMs
Related
The phone is is stucked on boot loader with 3 color image on the screen and does nothing, I tried to do a hard reset, flash to the original room, change battery, I've tried all the programs on this forum and nothing has worked, please i need help whit this...
The cellphone is g3.
I tried to sink with the computer and the computer recognized the phone, but when I tried to flash to original room or to other room, like touch flow, i phone , wm6, the program told me that the cellphone is not sink, that I should verified the cable connected to the computer and so on.
Please help
Bootloader
Ok,
When you turn on the phone and its in bootloder mode, when you connect the USB cable, do you see USB in the bottom left?
If so you should be able to flash a new rom from this page. I would suggest the OEM rom which you can download from htc website.
Try to reflash an OEM and then try again.
Thanks, I let you now wean i do this
was flashing and some one caused a communication error- . tried to recovery but was unsuccessful, now iall i see is run, green, blue, and white. is this what you called bricked. what can i do???
No, it is not bricked, with a bricked Wizard you can't either charge or power on it.
Just get another computer with ActiveSync installed (preferably a Notebook computer), and try RUU again.
And MAKE SURE you have already CID-unlock (NOTE: CID unlock is NOT SIM unlock) before flashing custom ROMs, otherwise follow the stickies to flash the Button's ROM and unlock it before proceed.
help
how can i try RUU????
i´ve also my 9100 with 3 colors , but when i connect to activesync they don´t recognize it.
how can i turn on again my 9100?
thx
hugo
hugomalheiro said:
how can i try RUU????
i´ve also my 9100 with 3 colors , but when i connect to activesync they don´t recognize it.
how can i turn on again my 9100?
thx
hugo
Click to expand...
Click to collapse
Activesync doesn't work in Bootloaders (multi color screen),but you can flash the phone in Bootloaders mode.While in Bootloaders (Multi color screen),hook your phone with pc via usb cable and watch small usb appear at the bottom of the Bootloaders mode,it confirms connectivity with pc and run the RUU in the Rom ,it'll start to flash. Let it complete and phone will reboot and start to work normal.
I´ve tried several times to run the RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1 but the application says that there isn´t no phone connected.
what i´m i doing wrong?
thx
Hi to all,
i wanted to flash my radio rom to 1.50 but each time i put pda to boot mode it is always writen Serial not USB. I tried to flash it from SD card but it does flashing but when i reboot it is still old radio rom. Then i changed usb cabel and in boot mode it gives me USB connection.
I bought new one (1.8m long and tried it, again it gives me Serial. Tried several cables same story. Is there difference in usb cables?
So if you can not do hardspl, if it gives you error 260 and no usb in white part of boot screen just try other usb cable.
Igor
komple said:
Hi to all,
i wanted to flash my radio rom to 1.50 but each time i put pda to boot mode it is always writen Serial not USB. I tried to flash it from SD card but it does flashing but when i reboot it is still old radio rom. Then i changed usb cabel and in boot mode it gives me USB connection.
I bought new one (1.8m long and tried it, again it gives me Serial. Tried several cables same story. Is there difference in usb cables?
So if you can not do hardspl, if it gives you error 260 and no usb in white part of boot screen just try other usb cable.
Igor
Click to expand...
Click to collapse
Read the guides my friend!
tnyynt said:
Read the guides my friend!
Click to expand...
Click to collapse
I read guides.There is nothing ther about usb cable. My point was that it works with some cables and with some it doesn't.
komple said:
I read guides.There is nothing ther about usb cable. My point was that it works with some cables and with some it doesn't.
Click to expand...
Click to collapse
You don't happen to use Vista, do you? In case you do, read here!
...and I've told you to read the guides because flashing from the SD Card works in every case, if you make the procedure right (have HardSPL installed and you do it the way described here.)
tnyynt said:
You don't happen to use Vista, do you? In case you do, read here!
...and I've told you to read the guides because flashing from the SD Card works in every case, if you make the procedure right (have HardSPL installed and you do it the way described here.)
Click to expand...
Click to collapse
this is not my first time to flash pda and i am not using vista.
It was my experience that wile i was in bootstarp screen (tricolor screen) while changeing several usb cables, with 3-4 of them it gave me only Serial connection but whith only with one of them it gave me USB connection on white screen and i could flash radio rom. Strange thing is thaht i can do synchromization with all of them. I tried it also on other computer with XP.
Maybe is something with my pda.
Oh yes i ahave hardspl 1.30.
komple said:
this is not my first time to flash pda and i am not using vista.
It was my experience that wile i was in bootstarp screen (tricolor screen) while changeing several usb cables, with 3-4 of them it gave me only Serial connection but whith only with one of them it gave me USB connection on white screen and i could flash radio rom. Strange thing is thaht i can do synchromization with all of them. I tried it also on other computer with XP.
Maybe is something with my pda.
Oh yes i ahave hardspl 1.30.
Click to expand...
Click to collapse
OliPro 1.30 has been reported with some issues, maybe that's why you can not flash with SD Card. I'd say to install Des' Crash Proof SPL but then you can not flash because of USB issue.
I have similar problem, need to first put the pda in booloader mode.
After that my usb connection is somehow stalled and the pda shows a serial connection.
Then i either have to reboot the computer or use another usb bus, to get the pda connected with usb.. Has nothing to do with the cables, but the fact windows is winblows.... (xp in my case).
Perhaps this is another issue tho..
Br Fredrik
I can do flash with one cable it is working fine.
Why do you recommend Des' Crash Proof SPL. What is difference from hardspl? Except maybe less issues ?
this made my day and allowed me to flash in vista (twice) without breaking a sweat!
http://forum.xda-developers.com/showthread.php?t=331675
About a year-ish ago windows stopped working on my spv3600 m700 Trinity. I looked into reflashing the phone & put a copy of schaps 4.30 striaght onto the fone no problems.
I now want to upgrade the rom again & can get it into the bootloader screen ok. My problem is that this is as far as I can get. I've even tried the minisd trick but I see loading box very briefly flash up on the screen & thats it...still in bootloader mode with serial but nothing else happens.
The fone is not bricked & if I reset it will load windows. I've tried the original flash & bootloader. Soft (SSPL) & hard Bootloader technique but to no avail.
Has anyone got any other solutions? Many thanks in advance, its sending me crazy!!
Ok I sorted the first problem of using SDcard to flash .MBH files. It was down to the miniSD card format not being FAT32. I reformat the card as FAT32 & then bootloader progressed to installation stage.
...now I have a new problem... i'm stuck in bootloader mode SPL 1.07.0000 IPL 0.50 after I used SSPL from my mobile in windows mode to get the 1.07ds override bootloader. This allowed me to flash the Radio to the latest chinese version. I then used this program again to Flash to windows 6.5 & then half way through it rebooted to the bootloader tricolour screen.
The problem is that now that windows is gone I can only run the standard bootloader SPL 1.07.0000 with the phone. If I try & upgrade a cooked ROM it comes up with an error code on the mobile. If I try an official version it checks the ROM & then says "not allowed".
Is there a way I can change the bootloader through the card SD? I can't either get the bootloader to change from serial msg to usb...doesnt matter how many times I plug in the USB & i'm using XP. Is there a way to force it into USB?
I've tried putting "Des crash proof SPL" ,"Hard SPL", "Hard SPL 1.20" onto SDmini card as TRINIMG.NBH bootloader loads then comes up with 00068002 error i presume on screen
I've tried putting official upgrades "RUU Trinity DOPODA SIA WWE...Ship.EXE rom" & "RUU Trinity HTC WWE .........GPS.exe rom" onto SDmini card as TRINIMG.NBH, bootloader loads, . . .checking, then displays "not allow" & "00028002" on screen! Now i'm really stuck!
Any help would be greatly appreciated!
looks pretty much the same like my trinity right now...
help would be very appreciated
Solved.
Finally worked out why my phone would not change from serial to usb on the bootloader screen. Its all down to the power from usb lead...luckily I have a double usb lead which I use for an external hard drive. Two usbs plugged into my laptop provides twice the current...as soon as I used this lead tadaaa, the phone comes on & is recognised by windows xp even when its in bootloader mode. If you don't have a lead try using a different computer...just incase the usb output is crap!
From here I then ran the unbrick / exploit program which you have to run two/three times but then this will put the phone into a bootloader which allows you to flash the phone with any ROM.
Hope this info is of any help.
steve54321 said:
Finally worked out why my phone would not change from serial to usb on the bootloader screen. Its all down to the power from usb lead...luckily I have a double usb lead which I use for an external hard drive. Two usbs plugged into my laptop provides twice the current...as soon as I used this lead tadaaa, the phone comes on & is recognised by windows xp even when its in bootloader mode. If you don't have a lead try using a different computer...just incase the usb output is crap!
From here I then ran the unbrick / exploit program which you have to run two/three times but then this will put the phone into a bootloader which allows you to flash the phone with any ROM.
Hope this info is of any help.
Click to expand...
Click to collapse
Still on bootloader with error 0068002
can't ran anything.
Please help......
SOLVED:::::::: sorry
Trinity bricked , pls help ...
steve54321 said:
Finally worked out why my phone would not change from serial to usb on the bootloader screen. Its all down to the power from usb lead...luckily I have a double usb lead which I use for an external hard drive. Two usbs plugged into my laptop provides twice the current...as soon as I used this lead tadaaa, the phone comes on & is recognised by windows xp even when its in bootloader mode. If you don't have a lead try using a different computer...just incase the usb output is crap!
From here I then ran the unbrick / exploit program which you have to run two/three times but then this will put the phone into a bootloader which allows you to flash the phone with any ROM.
Hope this info is of any help.
Click to expand...
Click to collapse
Hi , there ,
I am finding myself into the same situation but I do not realy get you : how You managed to get out of the bootloader mode where it says :
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
Can you , pls, be more specific , cause I am a newbe who bricked his Trinity a week ago :::
Blocked with error 0068002
Hello, after I install nAr.23016.FRA.IE8-CHOME on my sfr s300+, I'm blocked on the first page HTC, etc...When I put the S300+ under bootloader (photo and power button action), I plug the USB and I itry to flash;result is a reboot. I try with TRINIMG.NBH and result is error 0068002.
I need help to resolve this problem.Can u help me? Regards.
dan (excuse my bad english)
Hi All,
from one moment to another my X1 decided to boot into bootloader mode.
The strange thing is however, that when I connect it to the USB of my PC and reset the X1, it boots normally. Well, almost normal as the USB doesn't seem to be working.
I flashed the rom to APP-SW_X1_GENERIC_UK_1213-6450_R3AA010__KOVS using the SDCard and that worked without a problem. But still the X1 boots into bootloader mode (except when connected to the PC).
I tried a hardreset, pressed the volume down button several times (to make sure it isn't stuck), tried to use MTTY (but that doesn't show a prompt), but nothing seems to help.
Is there anyone who can help me with this, because I'm out of ideas....
Update:
I managed to boot the OS (USB connected) and install HSPL using Xperia-SSPL-Manual. This succeeded and I now have SPL-0.78.OliNext. I flashed the phone to a new ROM (826x_KOVSKY_29017_2021), and that succeeded as well. It didn't solve my problem however. I still get the bootloader screen when I start the phone and can only start the OS by starting with USB connected...
Update2:
Yesterday evening I took the whole phone apart to make sure no buttons are/were stuck. Didn't find anything, put it back together and it still boots into bootloader.
I also managed to get a connection to the phone using NueTTY. I executed command Set 14 0, restarted the phone...and still it boots into bootloader.
If there is any one who knows of something that I haven't tried yet, PLEASE let me know....
same problem,,if there's a way to flash recovery from sd card in fastboot mode,,that'd be great
kldahmd said:
same problem,,if there's a way to flash recovery from sd card in fastboot mode,,that'd be great
Click to expand...
Click to collapse
Flashing the ROM is no problem, I can put every ROM on it that I like. But even after flashing the ROM the phone still starts in bootloader....
You can try to go into the bootloader on ur pc and use recovery.bat with fastboot.
xvink said:
Flashing the ROM is no problem, I can put every ROM on it that I like. But even after flashing the ROM the phone still starts in bootloader....
Click to expand...
Click to collapse
hi, I'm kind of having the same issue as you do..can you please be of help and tell me how did you manage to HSPL it to 0.78.OliNex?
Correct me If I am wrong, but you must copy Xpera_SSPL_Manual. exe on X1, run it from file explorer and then run X1_HardSPL.exe on your PC, whlie X1 is connected via usb (although mine also doesn't recognize the X1) ?
i would really apreciate it... thnx
i have the same problem guys, did anyone of you found any solution for this?
same problem
Have you tried to do a task29 with KovskyAdvancedRUU?