flash interupted - 8125, K-JAM, P4300, MDA Vario Software Upgrading

was flashing and some one caused a communication error- . tried to recovery but was unsuccessful, now iall i see is run, green, blue, and white. is this what you called bricked. what can i do???

No, it is not bricked, with a bricked Wizard you can't either charge or power on it.
Just get another computer with ActiveSync installed (preferably a Notebook computer), and try RUU again.
And MAKE SURE you have already CID-unlock (NOTE: CID unlock is NOT SIM unlock) before flashing custom ROMs, otherwise follow the stickies to flash the Button's ROM and unlock it before proceed.

help
how can i try RUU????
i´ve also my 9100 with 3 colors , but when i connect to activesync they don´t recognize it.
how can i turn on again my 9100?
thx
hugo

hugomalheiro said:
how can i try RUU????
i´ve also my 9100 with 3 colors , but when i connect to activesync they don´t recognize it.
how can i turn on again my 9100?
thx
hugo
Click to expand...
Click to collapse
Activesync doesn't work in Bootloaders (multi color screen),but you can flash the phone in Bootloaders mode.While in Bootloaders (Multi color screen),hook your phone with pc via usb cable and watch small usb appear at the bottom of the Bootloaders mode,it confirms connectivity with pc and run the RUU in the Rom ,it'll start to flash. Let it complete and phone will reboot and start to work normal.

I´ve tried several times to run the RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1 but the application says that there isn´t no phone connected.
what i´m i doing wrong?
thx

Related

ActiveSync connect problem after flashing..

Hi, I flashed my Herald with WM6 ROM by ASerg, and it fails. Now after hardreset it loading only white screen with some beep (after startup screen with logo) and thats all.......my problem is simple - I can go to bootloader mode, but in bootloader, when i want to re-flash to another ROM, i can't connect it with PC. It showed USB in bootloader screen, but activesync dont want to synchronize and every flashing method showin' warrning NO DEVICE CONNECTED. i know, that herald is connected, pc warned me by beep that new hardware is connected, bud activesync no....how can i fix it ? please help.....thx
P.L said:
Hi, I flashed my Herald with WM6 ROM by ASerg, and it fails. Now after hardreset it loading only white screen with some beep (after startup screen with logo) and thats all.......my problem is simple - I can go to bootloader mode, but in bootloader, when i want to re-flash to another ROM, i can't connect it with PC. It showed USB in bootloader screen, but activesync dont want to synchronize and every flashing method showin' warrning NO DEVICE CONNECTED. i know, that herald is connected, pc warned me by beep that new hardware is connected, bud activesync no....how can i fix it ? please help.....thx
Click to expand...
Click to collapse
Try to falsh with RUU - it should work without active sync. Because in bootloader it connects BUT not via activesync.
Good luck
papamopps said:
Try to falsh with RUU - it should work without active sync. Because in bootloader it connects BUT not via activesync.
Good luck
Click to expand...
Click to collapse
Dear user
I have same problem
I try via RUU
but the problem not solved !
how can i do?
Thanks

SOLVED! Bootloaders as far as it goes...Will not load any flash with SSPL or HSPL.

About a year-ish ago windows stopped working on my spv3600 m700 Trinity. I looked into reflashing the phone & put a copy of schaps 4.30 striaght onto the fone no problems.
I now want to upgrade the rom again & can get it into the bootloader screen ok. My problem is that this is as far as I can get. I've even tried the minisd trick but I see loading box very briefly flash up on the screen & thats it...still in bootloader mode with serial but nothing else happens.
The fone is not bricked & if I reset it will load windows. I've tried the original flash & bootloader. Soft (SSPL) & hard Bootloader technique but to no avail.
Has anyone got any other solutions? Many thanks in advance, its sending me crazy!!
Ok I sorted the first problem of using SDcard to flash .MBH files. It was down to the miniSD card format not being FAT32. I reformat the card as FAT32 & then bootloader progressed to installation stage.
...now I have a new problem... i'm stuck in bootloader mode SPL 1.07.0000 IPL 0.50 after I used SSPL from my mobile in windows mode to get the 1.07ds override bootloader. This allowed me to flash the Radio to the latest chinese version. I then used this program again to Flash to windows 6.5 & then half way through it rebooted to the bootloader tricolour screen.
The problem is that now that windows is gone I can only run the standard bootloader SPL 1.07.0000 with the phone. If I try & upgrade a cooked ROM it comes up with an error code on the mobile. If I try an official version it checks the ROM & then says "not allowed".
Is there a way I can change the bootloader through the card SD? I can't either get the bootloader to change from serial msg to usb...doesnt matter how many times I plug in the USB & i'm using XP. Is there a way to force it into USB?
I've tried putting "Des crash proof SPL" ,"Hard SPL", "Hard SPL 1.20" onto SDmini card as TRINIMG.NBH bootloader loads then comes up with 00068002 error i presume on screen
I've tried putting official upgrades "RUU Trinity DOPODA SIA WWE...Ship.EXE rom" & "RUU Trinity HTC WWE .........GPS.exe rom" onto SDmini card as TRINIMG.NBH, bootloader loads, . . .checking, then displays "not allow" & "00028002" on screen! Now i'm really stuck!
Any help would be greatly appreciated!
looks pretty much the same like my trinity right now...
help would be very appreciated
Solved.
Finally worked out why my phone would not change from serial to usb on the bootloader screen. Its all down to the power from usb lead...luckily I have a double usb lead which I use for an external hard drive. Two usbs plugged into my laptop provides twice the current...as soon as I used this lead tadaaa, the phone comes on & is recognised by windows xp even when its in bootloader mode. If you don't have a lead try using a different computer...just incase the usb output is crap!
From here I then ran the unbrick / exploit program which you have to run two/three times but then this will put the phone into a bootloader which allows you to flash the phone with any ROM.
Hope this info is of any help.
steve54321 said:
Finally worked out why my phone would not change from serial to usb on the bootloader screen. Its all down to the power from usb lead...luckily I have a double usb lead which I use for an external hard drive. Two usbs plugged into my laptop provides twice the current...as soon as I used this lead tadaaa, the phone comes on & is recognised by windows xp even when its in bootloader mode. If you don't have a lead try using a different computer...just incase the usb output is crap!
From here I then ran the unbrick / exploit program which you have to run two/three times but then this will put the phone into a bootloader which allows you to flash the phone with any ROM.
Hope this info is of any help.
Click to expand...
Click to collapse
Still on bootloader with error 0068002
can't ran anything.
Please help......
SOLVED:::::::: sorry
Trinity bricked , pls help ...
steve54321 said:
Finally worked out why my phone would not change from serial to usb on the bootloader screen. Its all down to the power from usb lead...luckily I have a double usb lead which I use for an external hard drive. Two usbs plugged into my laptop provides twice the current...as soon as I used this lead tadaaa, the phone comes on & is recognised by windows xp even when its in bootloader mode. If you don't have a lead try using a different computer...just incase the usb output is crap!
From here I then ran the unbrick / exploit program which you have to run two/three times but then this will put the phone into a bootloader which allows you to flash the phone with any ROM.
Hope this info is of any help.
Click to expand...
Click to collapse
Hi , there ,
I am finding myself into the same situation but I do not realy get you : how You managed to get out of the bootloader mode where it says :
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
Can you , pls, be more specific , cause I am a newbe who bricked his Trinity a week ago :::
Blocked with error 0068002
Hello, after I install nAr.23016.FRA.IE8-CHOME on my sfr s300+, I'm blocked on the first page HTC, etc...When I put the S300+ under bootloader (photo and power button action), I plug the USB and I itry to flash;result is a reboot. I try with TRINIMG.NBH and result is error 0068002.
I need help to resolve this problem.Can u help me? Regards.
dan (excuse my bad english)

Messed up device after bad flash

I messed up my device after cooking a defective rom "I confused some folders", and now my phone stays at the sony ericsson logo.
I don't have and mmc reader in order to put a rom on it.....Can I flash the x1 through the pc on the bootloader screen??
I never do this but this time I'd really appreciate a quick response
Yes you can do it
I had to do it several times when my PC shutdown during flash...
how plz ??....cuz i read how to flash using pc with the update utility but it seems I must first connect through activesync....tell me how you do it plz
Hold the power button down and the volume down button at the same time you will see tri-colored screen...plug into computer run customruu follow prompts...
Regards,
WC
darkhalf520 said:
how plz ??....cuz i read how to flash using pc with the update utility but it seems I must first connect through activesync....tell me how you do it plz
Click to expand...
Click to collapse
1-put customRUU and your rom file in the same folder on your PC
2-launch customRUU
3-put your phone on tricolor screen
4-connect your phone to your PC with the USB cable (your phone should displau "USB")
5-follow the instructions in customRUU
It is the same way that you use when you flash with activesync but this time you put your phone on tricolor screen yourself
just put your device in bootloader mode, then connect to PC, the device can identify serial or usb connection in bootloader mode.
Thanks soooooo much everybody, damn I adore this community......
This will help a lot in the future as i get to cook more and more and risk the bricking every time, thanks !!

Bootloader not working?? No Image file

Hi, flashed many many times but today when trying to flash the latest NRG ROM when I go into bootloader I am getting problems.
First of all when I go into bootloader it quickly flashes a message saying no image file or something.
Then HSPL 1.56 Olinex it doesnt show USB when I connect via USB just sticks at serial.
When connected to PC the PC just says USB device not recognized.
So I am unable to flash, I am at a loss to what to do???
I have tried different PCs, different cables, all have the same problem.
The phone boots into ROM OK and works fine, and then when I connect via USB it activesyncs fine. I really dont understand this, can anyone help?? PLeeaase as I want the new ROMs

[Q] Possibly bricked Trinity, help please!!!

Hello!
I have this problem:
I've installed WM6.5 on my Trinity, and it worked well, but today I wanted to try WM6.1 (0.4.9.0 digital) also. The following happened:
Everything worked fine, but at 54% flashing my brother lifted the phone, possibly it lost the USB-contact, because the flasing stopped with an error message (unfortunately can't remember the error number). Since then if I try to flash it with WM6.1 or WM6.5, after 1% the phone resets itself, and the RUU gives a 270 error.
I have the original WM5 ROM also, but if I try installing it, after "Verifying information on your PDA Phone" screen I get a connection error 260.
What can I do???
After the phone resets itself, I can see the HTC logo, and the red letters and numbers, but that's all.
If I try HardSPL, I also get a 260 error.
Can you enter bootloader manualy?
If you can than see SERIAL change to USB when connected to PC it should be OK.
if you have a SD card, you can also try to flash "manualy".
- put your RUU... NBH at the root of the card,
- rename it trinimg.nbh,
- reinsert the card in the phone,
- enter in bootloader (power+cam+reset)
you will have a grey screen asking to push "power", do it and that's it.
if USB is well working, maybe you just need to reflash the hardspooler.
Thank you for your replies.
Fortunately I solved the problem.
I did the following:
1. To be sure, do all the stuff on a Windows XP machine
2. DISABLE "Allow USB Connection" in Active Sync so you see a small red X symbol next to the Active Sync symbol
3. Start the device into Bootloader mode (Cam+Power+Reset) and connect the device to your PC and make sure USB is written on the bottom of your screen (NOT Serial!)
4. Download splxploit (http://forum.xda-developers.com/atta...0&d=1180043588) and execute unlock on your PC
5. Follow the instructions
6. Download HardSPL (http://forum.xda-developers.com/atta...8&d=1185364317) and follow the instructions
7. Finally (to be sure) restart into Bootloader mode and check if SPL is showing "SPL-1.30.Olipro) - if this is the case you've done it !
8. Flash your preferred ROM via miniSD or USB connection
I m glad you solved this. Every day another new way of solving the flash problems.
Hi to All guys
i've got a trinity from my work and it has a custom rom.
I wanted to changed the rom so i download a wm 6.5 and erase the trinity with mtty. After that i try to install the rom with he RUUUupdate, but it get error 270.
Only in that moment i read on the bootloader and see that it haven't olipro or another HARDSPL installed.
So i looked for a solution and i try the unbrick with the splxploit. I did it and i get olipro on the bootloader, but i don't know how go on with install, if i use the exe i get 260 connection error.
Can you help me?

Categories

Resources