after do hard spl my touch pro2 cant power on and windows find new hardware:Qualcomm CDMA Technologies MSM
where is the driver and what can i do?
thanks
You should post this in the HardSPL thread really. Your PC needs to install a driver to be able to see the phone in bootloader mode like this - it should be able to find it automatically I think.
Related
I just bought an touch diamond
and when i flash a rom
windows can't find driver for "Qualcomm CDMA Technologies MSM"
and flashing was interrupted
Could anyone help me plz?
its incluyed with activesync
but if you only need driver its inluyed in this pack.
http://forum.driverpacks.net/viewtopic.php?id=3069
in "D\3\U\MS" folder
hi, im trying to install drivers for android in XP there are plenty drivers and guides here. so now i really dont know which one install. i got latest hardspl, dwang-v1.10 rom, g1.
there are drivers in
- SDK\usbdrivers\
this one
http://dl.google.com/android/android_usb_windows.zip
then updated driver
http://sapphire-port-dream.googlecode.com/files/usb_driver_updated.zip
so wich one choose, and then phone online state: install driver? if so which one?
bootloader? fastboot which one install?
i doing this because im trying to connect in bootloader mode. phone says fastboot usb i can see my phone in device manager installed fine but no adb devices or fastboot devices.
thanks for help.
There is a newer SPL that has additional keypresses for rebooting the phone, as well as progress indicators while flashing. It is located here
If you use the above SPL you will need new drivers for Windows. They are located here
Click to expand...
Click to collapse
The 'updated' driver is only for 1.33.2005 SPL, not Hard SPL.
Use the first one.
I have got a HTC Diamond and after trying to run the unlocker on www forum*ppcgeeks*com/showthread.php?t=36062 the program ran and then my phone would not startup. I have tried a few things but at the moment it is just bricked.
PLEASE CAN SOMEONE HELP....
Teh thread you mention is for CDMA Diamond, I truely hope you have a CDMA phone and not the GSM version, cuz using this unlocker on a GSM bricks your phone, and i really don't know if there is any way to 'unbrick' it.
you used the gsm bricking tool so now you have a busted phone.
That was silly of you GSM / CDMA variants should be regarded as completely different phones. There was plenty of warning on that page.
Here are my suggestions:
Try and go into bootloader mode. Take out the battery and reinsert, power up while holding down the VolDown button (or the back arrow for CDMA). If you get nothing, then I have to say sorry for your loss.
If you get to the rainbow bootloader screen, you're very lucky. Go to the Diamond (GSM or CDMA -- use the appropriate one) HardSPL thread and install the latest HardSPL. Then try and flash a stock ROM. You can go on from there.
If you manage to get this far, please pay for a legitimate unlock procedure:
OliPro Diamond Unlock
There are a lot of good threads for doing the Hard-SPL so that I can install custom ROMs like I did for my 8925. When I power up my TILT 2 (ATT&T) it says "WorldPhone".
My confusion is why neither the CDMA Worldphone or the GSM Hard-SPL tools are working. BOTH says that my device isn't connected. ActiveSync SAYS that it's connected and I can use ActiveSync to explore my device.
I got spoiled with my TyTnII so that now I can NOT stomach using the stock ROM on the new phone.
Any clarification would be appreciated.
MattEBnCT said:
There are a lot of good threads for doing the Hard-SPL so that I can install custom ROMs like I did for my 8925. When I power up my TILT 2 (ATT&T) it says "WorldPhone".
My confusion is why neither the CDMA Worldphone or the GSM Hard-SPL tools are working. BOTH says that my device isn't connected. ActiveSync SAYS that it's connected and I can use ActiveSync to explore my device.
Click to expand...
Click to collapse
That "Worldphone" thing is kinda confusing, I agree. Your phone is a GSM TP2, so you need to use the GSM TP2 HardSPL, i.e. the one in this forum. The CDMA phones are also referred to as Worldphones, but you don't have a CDMA phone so that one won't work.
You need to post up in the sticky HardSPL thread on your problem, rather than starting a new one. Try searching for and installing "enablerapinew.cab" on your phone, soft reset, sync it and try again.
I want to flash older rom to my HD7 (want to install chev but only managed to restore to non ie-fix version with Zune)
But, I have trouble connecting HD7 with PC in tricolor bootloader mode
(serial always stays on, cannot get it to usb)
In device manager I can see that phone is detected as
Qualcomm CDMA Technologies MSM
but without drivers...
I tried to search for drivers but only get some samsung drivers (that does not work). I searched forums but haven't find that people have same problem with HD7...
What Am I doing wrong?
Win 7 64bit
Ensure you're connected to the internet when plugging in. The drivers are downloaded automatically from Windows Update.
I downloaded Microsoft Windows Mobile Device Center for Windows Vista (64-bit) for HD2 and it works...
Love Cook said:
I downloaded Microsoft Windows Mobile Device Center for Windows Vista (64-bit) for HD2 and it works...
Click to expand...
Click to collapse
HD2 or HD7 I thought the HD7 did not work with wmdc
Sent from my HD2 using XDA App