ok i am trying to adb my phone but when i plug it in to my computer it comes up unkown device. under device manager. how do i get it to work?
When i uninstall and reinstall it comes up newdev.ext - bad image
try following the directions in this thread it is how i set up adb on my phone.
if you have haykuro's spl then you will need the drivers from his site to get it to work. i think you can get haykuro's updated drivers from here hope this helps.
Original question(s) seem to be solved.
Closing thread
i have tried installing and uninstalling drivers for my g1, i have pretty much determined that the problem that i am having about the g1 preparing the sd card right after mounting. I need to Install the drivers that correspond with the g1. How do i go about doing this because i cannot locate where to update the driver because i do not know which one is which. Help would be appreciated.
uh you must make more senseish huh? (Please clarify your question, it makes little sense and is very obtuse.)
Please post the following...
*what OS are you running. (Win XP/Vista/Win 7)
*What drivers have you installed
Since you have SPL 1.33.2005, you need to install the updated driver:
http://sapphire-port-dream.googlecode.com/files/usb_driver_updated.zip
I seem to be getting no where and am reaching out for a little help. I am using XP system and trying to fastboot my g1 and mytouch 3g. I am running Cyan 4.2.4, and I am trying to figure out how yo get fastboot working. I found the guide to help, but the new SDK doesnt come with the usb drivers.
I am trying to flash custom splash screens.
How can I get my MT3g and G1 fastboot ready?
spazoid said:
I seem to be getting no where and am reaching out for a little help. I am using XP system and trying to fastboot my g1 and mytouch 3g. I am running Cyan 4.2.4, and I am trying to figure out how yo get fastboot working. I found the guide to help, but the new SDK doesnt come with the usb drivers.
I am trying to flash custom splash screens.
How can I get my MT3g and G1 fastboot ready?
Click to expand...
Click to collapse
Well first of all you need an SPL which is fastboot enabled, be it HardSPL, Engeneering, or 1.33.2005 (AKA Haykuro, Danger, blah blah).
If you're having trouble with your current drivers try these.
How do I go aboput getting those installed?
And if I change the spl is there a way to revert back to stock? ie 1.33.0006
spazoid said:
How do I go aboput getting those installed?
And if I change the spl is there a way to revert back to stock? ie 1.33.0006
Click to expand...
Click to collapse
Drivers or SPLs?
SPL: It's just a regular update that you flash. For the G1 I reccomend 1.33.2005, just make sure you have the .26i radio first. If you don't it will brick, also boot in to reocvery to check you have a PVT board first.
Drivers: Once you get the phone in to fastboot via the SPL, windows should tell you that new hardware has been connected, from there choose to install from a certain location and select the drivers I linked to earlier.
For the MT3G, look for AmonRA's posting of which SPL's to use in the sapphire section.
I still don't get it though....can u help me
Running Win7, HTC Sync installed and a NEW Hero with .6. According to all i read I need to RUU to the .5 version, I try, I follow the instruction but keep getting a USB connection error when it is looking for the boot loader...UGH, I need help. Im on Gtalk at jwkoppe...thanx
Is your phone showing in adb .... adb devices.
It sounds like your usb driver is not setup correctly, wi7 seems to have an issue with this.
Hi everybody,I have a HTC HD7 with this software version.
OS Version: 7.10.8779.8
Firmware revision number: NG+3.4
Hardware revision number: 0002
Radio software version: 5.71.09.02a_22.51.50.21U
Radio hardware version: A.102.0.D4
Bootloader version: 3.1.2250.0(119314)
Chip SOC version: 2.2.5.0
I would like to update phone to Windows 7.8,as i can see,i think that my phone hasn't got stock rom,so how sholud I update it to 7.8?Can i install stock 7.8 rom or I have to install some other 7.8 rom?And do I have RSPL/HSPL installed on my device?When I connected phone to Zune,it gave me an update to 7.10.8783.12,I went through,but it gave me a error code 80180048,so what should I do?
Thank you in advance.
Greetings.
As I can see my device has got HSPL installed,so I followed this tutorial to install custom rom.
http://forum.xda-developers.com/showthread.php?t=1295068
But,when i want to install rom using task29 i get error,saying that device is not connected.
First I have entered bootloader mode,than i connected the phone to PC,on phone screen it changed from SERIAL to USB,but no luck,task 29 keep saying that device is not connected,so I can't install 7.8 custom rom.
Please help.
Thanks.
djole199 said:
As I can see my device has got HSPL installed,so I followed this tutorial to install custom rom.
http://forum.xda-developers.com/showthread.php?t=1295068
But,when i want to install rom using task29 i get error,saying that device is not connected.
First I have entered bootloader mode,than i connected the phone to PC,on phone screen it changed from SERIAL to USB,but no luck,task 29 keep saying that device is not connected,so I can't install 7.8 custom rom.
Please help.
Thanks.
Click to expand...
Click to collapse
Do you want to install a custom ROM or do you just want to update to WP 7.8?
I would like to install Deepshining HD7 v8.1 ROM,on current ROM I have Nokia Drive,and i would like to have it on 7.8 as well,does Nokia Drive come with ROMs or I have to install it my self?As I said,I tried to install Deepshining HD7 v8.1 Custom Rom via task 29,but i was unable because of device not connected error.
P.S.I am on Windows 7 64bit.
Thanks for the reply.
djole199 said:
I would like to install Deepshining HD7 v8.1 ROM,on current ROM I have Nokia Drive,and i would like to have it on 7.8 as well,does Nokia Drive come with ROMs or I have to install it my self?As I said,I tried to install Deepshining HD7 v8.1 Custom Rom via task 29,but i was unable because of device not connected error.
P.S.I am on Windows 7 64bit.
Thanks for the reply.
Click to expand...
Click to collapse
if Bootloader version is 3.xx or 2.xx or 1.xx
download XSPL, http://forum.xda-developers.com/showpost.php?p=16189671&postcount=1
extract the contents of the rar.
run DFT_RSPL..._LAUNCH.exe
please, read information text. select 'Next' button.
power off device and enter Bootloader.
connect device via USB to PC, 'Serial' will change to 'USB' once connected properly.
select 'Next' button on the XSPL wizard and it should now detect your device.
note. do not proceed if OSPL is 5.xx or 4.xx, instead go to Step 05.
select the closest OSPL, on the wizard, to the one on device.
select 'Next' button. wait until wizard proceeds to final page. read and close window.
note. device must boot into Bootloader.
if Bootloader reads RSPLX.Y.Z and CotullaRSPL, then RSPL was successful.
continue to Step #30 or #38.
Click to expand...
Click to collapse
Quoted from http://forum.xda-developers.com/showthread.php?t=1295068
The Dynamics 2.2 ROM ( http://forum.xda-developers.com/showthread.php?t=1523991 ) has all the Nokia apps pre-installed,
The Deepshining 8.1 doesn't, you will need to install them manually
I don't understand,I have to install RSPL or HSPL every time when i want new ROM?
When I enter Bootloader here is what it says.
PD29100 SS-BC (4K)
HSPL3.1.2250.0(119314)
CotullaHSPL 0x07
TOUCH S1(v1.8,#1624)
SD SANDISK 7580MB
Partition Info-v211v413
If I understood it from the guide above,i just have to install Custom ROM now?Am I right?
djole199 said:
I don't understand,I have to install RSPL or HSPL every time when i want new ROM?
When I enter Bootloader here is what it says.
PD29100 SS-BC (4K)
HSPL3.1.2250.0(119314)
CotullaHSPL 0x07
TOUCH S1(v1.8,#1624)
SD SANDISK 7580MB
Partition Info-v211v413
If I understood it from the guide above,i just have to install Custom ROM now?Am I right?
Click to expand...
Click to collapse
Which ROM do you want to install?
I would like to install The Deepshining 8.1 ROM,than i wold like to install Nokia Drive.
djole199 said:
I would like to install The Deepshining 8.1 ROM,than i wold like to install Nokia Drive.
Click to expand...
Click to collapse
You should be able to install Deepshining v8.1.
Here's the link http://d-h.st/4d6
Yes,but like I said,I tried twice to install it,and task 29 said that device is not connected,
I followed task 29 steps,and it says.
2.Establish an ActiveSync connection with your Pda Phone.
I think this is the problem why it doesn't work,becuse there is not ActiveSync for Windows 7,but I installed Windows Mobile Device Center,but still no luck,what i noticed is that my PC can see the phone in Windows Mobile Device Center only if i turn on Zune,emidietly if I turn of Zune,Windows Mobile Device Center says that device is not connected,and trouble is that when phone is in Bootloader,Windows Mobile Device Center and Zune don't recognize it.
djole199 said:
Yes,but like I said,I tried twice to install it,and task 29 said that device is not connected,
I followed task 29 steps,and it says.
2.Establish an ActiveSync connection with your Pda Phone.
I think this is the problem why it doesn't work,becuse there is not ActiveSync for Windows 7,but I installed Windows Mobile Device Center,but still no luck,what i noticed is that my PC can see the phone in Windows Mobile Device Center only if i turn on Zune,emidietly if I turn of Zune,Windows Mobile Device Center says that device is not connected,and trouble is that when phone is in Bootloader,Windows Mobile Device Center and Zune don't recognize it.
Click to expand...
Click to collapse
Did you install the drivers?
What drivers?
djole199 said:
What drivers?
Click to expand...
Click to collapse
When you enter bootloader while your phone is connected to the PC there will need to be some drivers installed
Ok,where can i download them?
You don't need to download them you can just connect your phone to the PC and enter bootloader it will start installing.
Can U tell me how to do it,because when i turn off phone and connect it,phone starts up by itself.
djole199 said:
Can U tell me how to do it,because when i turn off phone and connect it,phone starts up by itself.
Click to expand...
Click to collapse
Plug your USB cable in your PC without your phone connected, now turn off your phone and press power on + volume down on your phone and the colour screen will pop up at the bottom it will say "Serial", now you will need to plug in your USB cable that was already connected to your PC and the drivers will install and if you have done everything right it will says "USB" at the bottom of your screen
Thans,it went through,I am installing The Deepshining 8.1 ROM right now.
djole199 said:
Thans,it went through,I am installing The Deepshining 8.1 ROM right now.
Click to expand...
Click to collapse
I'm happy to hear that! Now for Nokia Drive try this thread http://forum.xda-developers.com/showthread.php?t=2070997
Q: How to deploy XAPs?
A:
1. You need to connect your phone to your desktop
2. Start Zune and wait for Zune to discover your phone.
3. Run Multiple Xap download here http://forum.xda-developers.com/showthread.php?t=943842 and make sure your device is not screen locked.
4. Deploy Xaps
Click to expand...
Click to collapse
Have fun with your new ROM.
Ps. a click on the thanks button would be highly appreciated
I downloaded Multiple Xap,but it wont start,also Devstore8 on my phone is not working.
Is there another way do deploy XAPS.
Thanks once again.