Running Win7, HTC Sync installed and a NEW Hero with .6. According to all i read I need to RUU to the .5 version, I try, I follow the instruction but keep getting a USB connection error when it is looking for the boot loader...UGH, I need help. Im on Gtalk at jwkoppe...thanx
Is your phone showing in adb .... adb devices.
It sounds like your usb driver is not setup correctly, wi7 seems to have an issue with this.
Related
I tried to update my rom and it was working, until my laptop turned off. (I forgot to plug in the power cord). So I tried it again, and it was stuck in bootloader and so I tried to update it using a Official Cingular Rom. But it gives me an error 260 saying cannot connect. I then tried to use mtty (one of the guides on here) but there's no USB option. I tried this on 3 different computers. Any suggestions please?!
To access mtty with USB option, you need to kill the wcescomm process (or disable USB connection in ActiveSync).
Thanks for the reply but I did kill it and disable usb connections. Stll no USB shows up. Im using a pretty new laptop with XP
Are you sure your Wizard is in bootloader mode when you start mtty?
It's always in bootloader mode when it's on since the Rom Update Failed ( computer turned off).
I really don't know why I have this problem. It was working before, but then it failed, and now it wont connect
Try to flash it on another computer.
I suspect there are problems on the USB ports (And/Or software issues) of your computer...
In my first post I said I tried to flash it on 3 different computers ( I meant laptops.) I dont know why it wont work now though. It worked yesterday
If it helps before it gives me the 260 error it says my USB device is not recognizable.
Please, does anyone have anything?
Im getting realy worried and my warrantys expired
help me stuck on bootloader
what do i do when i downloaded mtty? im am stuck on the bootloader screen due to a 98percent error but right now i cant do anything but stay on the bootloader.
I downgraded so im back to
IPL 1.01
and SPL 2.25.
HELP me get out this screen please? I've tried almost everything i could search on this forum. thanks in advance. and thanks for the hard work on the great roms you guys have!
Is there any other way to revive my device? I've been trying for the past 2 days and it's still not working
TheTop- Flash a official rom to it
I have tried official Roms like the one from the htc website, should I just keep trying even if I get error 260?
dunno if it helps, but make sure that you're battery is charged at least 50%. It seems to be one of the requirements that are needed when you normally flash with the RUU after activesync hookup. I know that when I tried flashing below 50%, the program wouldn't work for me and boot out.
if it's below 50%, look for a friend to charge it and try again.
I followed some steps to get fastboot to work and I got the dev spl. Ok when I'm in fastboot I says that I need to install the htc dream driver, so the post I read told me to use the same driver that I got adb to work, so I did and it said, cannot start this hardware...there was a problem installing htc dream......this device cannot start. Code 10................ I have the debug checked. I flashed the dev spl 2 my dream. So any help would be appreciated....
i bet.....
if i put this in a different post, i bet someone would actually help me out instead being alone in this Q&A section waiting to be answered....
tnt8902 said:
if i put this in a different post, i bet someone would actually help me out instead being alone in this Q&A section waiting to be answered....
Click to expand...
Click to collapse
if its the driver you need installed, download and install PDAnet. just google for it. it automatically installs the ADB drivers. just follow the on screen setup
hi, im trying to install drivers for android in XP there are plenty drivers and guides here. so now i really dont know which one install. i got latest hardspl, dwang-v1.10 rom, g1.
there are drivers in
- SDK\usbdrivers\
this one
http://dl.google.com/android/android_usb_windows.zip
then updated driver
http://sapphire-port-dream.googlecode.com/files/usb_driver_updated.zip
so wich one choose, and then phone online state: install driver? if so which one?
bootloader? fastboot which one install?
i doing this because im trying to connect in bootloader mode. phone says fastboot usb i can see my phone in device manager installed fine but no adb devices or fastboot devices.
thanks for help.
There is a newer SPL that has additional keypresses for rebooting the phone, as well as progress indicators while flashing. It is located here
If you use the above SPL you will need new drivers for Windows. They are located here
Click to expand...
Click to collapse
The 'updated' driver is only for 1.33.2005 SPL, not Hard SPL.
Use the first one.
Hi all,
Im trying to flash my SPL by following the sticky guide in order to install the Windows Mobile 6.5 and Manilla 2.5 ROM by Miri. I connected the device to my laptop, got an ActiveSync connection, started in Bootloader, waited for the USB sign and ran the application but the loading bar gets stuck on 0% before giving an Error. I then went to troubleshooting and tried the manual SPL flash but when it restarts in the new bootloader, I don't get the USB text at the bottom. If I try running the program, I get Error 260: Connection. Sorry if this has already been covered in a previous post, I did try searching the forum but didn't really know where to look.
Russell
I had same problem.
Change usb cable, change usb port you are using and make sure antiviruse turned off.
rgtuit said:
Hi all,
Im trying to flash my SPL by following the sticky guide in order to install the Windows Mobile 6.5 and Manilla 2.5 ROM by Miri. I connected the device to my laptop, got an ActiveSync connection, started in Bootloader, waited for the USB sign and ran the application but the loading bar gets stuck on 0% before giving an Error. I then went to troubleshooting and tried the manual SPL flash but when it restarts in the new bootloader, I don't get the USB text at the bottom. If I try running the program, I get Error 260: Connection. Sorry if this has already been covered in a previous post, I did try searching the forum but didn't really know where to look.
Russell
Click to expand...
Click to collapse
You're using sticky guide yet you created a new thread instead of posting in sticky....why? no need for this
Thread closed
p.s. for your info
ERROR [260] : CONNECTION
This error occurs when the RUU cannot make a connection to the device right before flashing. This typically happens when you try to flash a new SPL to your device. Use Soft-SPL before attempting the RUU again.
If this doesn't work, try resetting your device, put it in bootloader and then connect it to usb cable
I have followed all the instructions on this website!! I have microsoft Vista and I installed the appropriate drivers on my phone to change the USB and everytime I try run USPL GUI v 2.5 I get a message saying Error accessing device. The phone is in bootloader mode as well while I do this and I tried to do the SSPL MAnual Touch HD on my phone and got error messages as well.....what am I doing wrong! Im stumped
Surely this phone is out of Warranty
hd2person said:
I have followed all the instructions on this website!! I have microsoft Vista and I installed the appropriate drivers on my phone to change the USB and everytime I try run USPL GUI v 2.5 I get a message saying Error accessing device. The phone is in bootloader mode as well while I do this and I tried to do the SSPL MAnual Touch HD on my phone and got error messages as well.....what am I doing wrong! Im stumped
Click to expand...
Click to collapse
You're out of warranty right?
So why not just use HardSPL?
Regards,
Tigermoto.
Same problem with Vista and Seven, even with the drivers that should work.
My solution is using an old backup notebook with XP.
Please post further queries/responses regarding flashing, USPL & HSPL here. No need for another thread
Thread closed