Database Develop

HTC TYTN II - How to recover from bad flash.

Greetings everyone,
I would like to ask for some advice.
I bought a HTC TYTN II and wanted to flash it to a ROM I found on the forum.
But to do that I had to use nueSPL-2.47.exe
That turned out to be a mistake as at the moment it started formatting to FAT32 the screen freezed. And I waited for around 15min. But nothing happend.
Now needless to say the device does not function. I tried a hard reset(Camera+Power+Reset) and just (Reset). But all I get is a screen darker than the pits off hell.
I am able to get the power light burning but that is it. Already tried putting the battery out and in again. But all to no avail. Maybe one of you can help me?
Thank you in advance.
-
Previous OS: Windows 6.1 (Dutch)
Active sync: 4.5.0
PC OS: Windows XP pro (English)

Just a thought but...you might want to check the Kaiser forum instead...

Posted in Titan forum. Moved to Kaiser forum.

You flashed a Titan SPL to your Kaiser?
Oh dear, not to worry, it might be fixable...
Can you get to your Bootloader?
Ta
Dave

Confused "Tytn" with "Titan", too bad.. That's already happened, if you search for "nuespl" in the Kaiser forum you should find a thread about someone else who had the same problem recently.

kilrah said:
Confused "Tytn" with "Titan", too bad.. That's already happened, if you search for "nuespl" in the Kaiser forum you should find a thread about someone else who had the same problem recently.
Click to expand...
Click to collapse
The other guy never fixed his phone
Dave

uh oh... what was your radio version? does the PC still try to load a driver when you connect the phone?

Wrong firmware now that explains things.
It seems that the soft/hard reset and boot loader are not working for me. All I ever get is the power light and no screen at all.
Just my luck.
My phone was a 3G version.
When I connect it via USB it does try and load drivers but it does not find the correct drivers. While the phone was ok the drivers were fine.
Strange.

I sure hope I do not have to send it to my supplier. Because the phone is just 2 weeks old ;-)

Jin_member_of_triforce said:
Wrong firmware now that explains things.
It seems that the soft/hard reset and boot loader are not working for me. All I ever get is the power light and no screen at all.
Just my luck.
My phone was a 3G version.
When I connect it via USB it does try and load drivers but it does not find the correct drivers. While the phone was ok the drivers were fine.
Strange.
Click to expand...
Click to collapse
are you able to load these drivers: http://forum.xda-developers.com/attachment.php?attachmentid=71038&d=1203255530
3G, okay, all of them are 3G... do you remember exact radio version. no problem if not, though.

Sorry I do not know the exact number.
I was able to install the drivers. So thanks for that.
But If I try and get onto my phone I have no folders. And active sync does not see the device. Maybe I need to use a program like artemis to get files on there?

There is of course a change I might be able to get files on there by putting my SD card in a card reader.
But does it boot from there?
Pocket controller-pro did not work for me.

Jin_member_of_triforce said:
Sorry I do not know the exact number.
I was able to install the drivers. So thanks for that.
But If I try and get onto my phone I have no folders. And active sync does not see the device. Maybe I need to use a program like artemis to get files on there?
Click to expand...
Click to collapse
that will not help, but there is another way... PM me, as it needs interactive step by step instructions.

im having the same issue i just ran the neuspl 2.47 and my htc tilt wont work the power light comes on and thats it can somepone please help me out i am in need of help badly!

what to do after performing HardSPL?

hi, I've just bought my G1 so I'm a noob frankly speaking. During yesterday I had tried to root my G1 (not sure successful or not), and successfully applying HardSPL on my G1 already.
and now, I would like to flash to CyanogenMod 3.6.5 which based on android 1.5, while currently my G1 is still firmware 1.0 and the baseband is 1.22.12.29 with TC4-RC29 build.
So, my question is, what should I do next so I can flash to CyanogenMod 3.6.5? From what I've read around the forum, it seems I have to update my Baseband version to 2.22 something is it? But, i also read that I must update radio before applying SPL... so if I'm going to update radio, will it brick my G1 since I HardSPL before updating this radio.
another question is that, do I have to update my build? what is the use of build actually...
thank you for everyone in advance

You're going too fast and you've confused yourself.
There are plenty of good guides around. Slow down, use the search, and READ EVERYTHING TWICE. If you carry on trying to do this stuff before you understand it, you're going to end up with a shiny new brick.

good advice

thanks for your advice. but can you please hint me where to get the good guide for a noob like me?
the problem is that I can't seem to find a good guide for a noob like me in the first hand because almost every topic regarding to the rooting just stop half after installing HardSPL... that's why I'm getting confused whether to install Radio first or SPL first...
at least the one that I'm referring did not mention anything about updating Radio and just installing the HardSPL right away.
thanks.

Here's all the guides you need.
http://forum.xda-developers.com/showthread.php?t=519523

thanks a lot!!! Hope I can fully understand all these stuff

I don't understand also what to do. At the end I just want to install xap files on my phone.
I make successful installing on HardSPL. And after reading may be 500 posts i still don't understand what is the next step to deploy xap files on my phone. I read that I need Application Deployment tool but it doesn't work. So i did this (below) exactly and after this error:
error - application launch failed. ensure that the device screen is unlocked and device is developer unlocked.
i think that i'm missing something. What else after HardSPL i need so I can deploy xap files? If there is not other thing then why is this error. I do exactly instructions for deployment :
1.From your computer go to the Start menu and navigate to “Windows Phone Developer Tools”.
2.From among the options look for “Application Deployment” and select it.
3.When asked to specify a target device for deployment, choose “Windows Phone 7 Device”.
4.Direct the tool to the file path of the XAP entity you want in your phone.
5.Plug in your phone to the PC via USB cable.
6.Let Zune sync with your device.
7.Without letting your phone go to sleep, press the Deploy button in the tool running on your PC.
I forgot to say that my phone is HTC Mozart 7 and I hope that i'm asking in the right place.

Wrong place man! This is Q&A for the HTC Dream G1
Enviado desde mi LG-E730 usando Tapatalk 2

DorianX said:
Wrong place man! This is Q&A for the HTC Dream G1
Enviado desde mi LG-E730 usando Tapatalk 2
Click to expand...
Click to collapse
I don't think so.
After reading 5 hours i found the simple answer.
After instaling HSPL u can now instal Custom Rom which is fully unlock.
That's it.

Question!! ASAP Answer

ok i am trying to adb my phone but when i plug it in to my computer it comes up unkown device. under device manager. how do i get it to work?

When i uninstall and reinstall it comes up newdev.ext - bad image

try following the directions in this thread it is how i set up adb on my phone.
if you have haykuro's spl then you will need the drivers from his site to get it to work. i think you can get haykuro's updated drivers from here hope this helps.

Original question(s) seem to be solved.
Closing thread

which drivers install when for g1

hi, im trying to install drivers for android in XP there are plenty drivers and guides here. so now i really dont know which one install. i got latest hardspl, dwang-v1.10 rom, g1.
there are drivers in
- SDK\usbdrivers\
this one
http://dl.google.com/android/android_usb_windows.zip
then updated driver
http://sapphire-port-dream.googlecode.com/files/usb_driver_updated.zip
so wich one choose, and then phone online state: install driver? if so which one?
bootloader? fastboot which one install?
i doing this because im trying to connect in bootloader mode. phone says fastboot usb i can see my phone in device manager installed fine but no adb devices or fastboot devices.
thanks for help.

There is a newer SPL that has additional keypresses for rebooting the phone, as well as progress indicators while flashing. It is located here
If you use the above SPL you will need new drivers for Windows. They are located here
Click to expand...
Click to collapse
The 'updated' driver is only for 1.33.2005 SPL, not Hard SPL.
Use the first one.

I cant RUU :(

Running Win7, HTC Sync installed and a NEW Hero with .6. According to all i read I need to RUU to the .5 version, I try, I follow the instruction but keep getting a USB connection error when it is looking for the boot loader...UGH, I need help. Im on Gtalk at jwkoppe...thanx

Is your phone showing in adb .... adb devices.
It sounds like your usb driver is not setup correctly, wi7 seems to have an issue with this.