Does anyone know how can the HardSPL be installed through internal memory because my usb port doesn't work at all at data transfer mode, only for charging and handsfree. I have the HTC diamond from vodafone. I have tried many ways but nothing works. Also I have tried many hardspls but nothing. I don't know if I am doing anything wrong through the process. Can someone post the procedure from flashing it through internal memory ?
I also tried copying and executing the SSPL-Manual.exe from the internal memory (I have also copied the RUU_signed.nbh renamed into diamimg.nbh) but nothing happened the phone switched off and I had black screen. The file I used is Unsigned-Hard-SPL-Diamond-OliNex.zip downloaded from the Complete upgrading guide (HardSPL+Radio+ROM) NOT FOR CDMA USERS!!! thread.
My phone has the following information when enetering bootloader mode:
DIAM100 64
SPL-1.97.0000
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
Also the phone is flashed through internal memory with the latest official rom provided by the vodafone uk website
Related
Hi All,
As mentioned above, I ahve tried many times to Hard SPL my experia through USB cable but I dunno why it still fail (like what happened to Malik in his topic. Error connection 262). I have tried all the way that mentioned in that topic but mine still fail. Since I am able to flash UK Generic ROM through SD Card Method, Now I am wondering if xperia able to Hard SPL through that method.
Any senior member got any idea?
kmunz said:
Hi All,
As mentioned above, I ahve tried many times to Hard SPL my experia through USB cable but I dunno why it still fail (like what happened to Malik in his topic. Error connection 262). I have tried all the way that mentioned in that topic but mine still fail. Since I am able to flash UK Generic ROM through SD Card Method, Now I am wondering if xperia able to Hard SPL through that method.
Any senior member got any idea?
Click to expand...
Click to collapse
Hi,
I posted this response a few minutes ago in the Kaiser forum, it's relevant here too...
http://forum.xda-developers.com/showpost.php?p=3273438&postcount=7
Ta
Dave
I'd like to refresh this thread: can anyone quickly give an update if hardSPL can be made with SD method ? (if I rename the 0.78olinex to kovsimg.nbh for example)
this of course is needed when there's that damn problem with PC connection
przemke said:
I'd like to refresh this thread: can anyone quickly give an update if hardSPL can be made with SD method ? (if I rename the 0.78olinex to kovsimg.nbh for example)
this of course is needed when there's that damn problem with PC connection
Click to expand...
Click to collapse
I think it doesn't work. In the instruction for SD-Methode there you have to HARDSPL first... You can read it here.
__________________
Edit:
First of all before you try it, think about that, that I am not responible about any damages etc. because the instruction is not for X1 but it might help you if you really can not flash it via US
I found a thread (other mobile phone) but maybe that is working, you have to use a HSPL for X1 of cause.
You can give it a try and if it is working you can tell, so it could be added to HSPL thread.
SuperSport said:
**********************************
Alternate SD Card Method
**********************************
For those who would rather use their SD Card for this (Maybe your USB Port is not functioning). For this method, the way I'm describing, your phone must be running a version of Windows Mobile. Can be any Version, 5-7. If your phone does not currently run, flash back the OEM ROM that came with it Originally. You can find some in my signature.
Caution!!! Flashing Hard-SPL may Hard Reset your device!!!! Backup all data FIRST!!!
1. Be sure you have a, Non-SDHC, SD Memory Card.
2. Be sure the card is formatted Fat32 and Without a Label.
3. Download the attached HardSPL SD.zip file and extract it's contents. Copy both files, SSPL-TRIN.exe and TRINIMG.nbh, to the Root of your SD Card.
4. On your phone, use File Explorer to browse to the Root of your SD Card.
5. Tap the SSPL-TRIN.exe file. This should run the file.
6. On some phones, you will see a security message come up. Select 'Yes' to run the program.
7. You should now see a Grey screen with Blue Lettering. It will be asking you to Press power button. Go ahead and press the power button.
8. You will see the update progress for a short moment, it will restart, and update again, then show "Update Complete - UPDATE SUCCESS" If you see this message, it has worked.
9. Press the Reset Button with your Stylus to Restart
10. Delete the two files from your SD Card (TRINIMG.nbh, SSPL_TRIN.exe). To confirm Hard-SPL is on your device, Enter Tri Color Screen following directions above. You should see the following:
Hard SPL 1.20.Olipro
TRIN100
IPL-0.50 (your device may show IPL-1.00)
TRIN100 MFG
SPL-1.20.Olipro
CONGRATULATIONS!! You have now installed Olipro's Hard-SPL 1.20 on your device using SD Method!! Press the Reset Button with your Stylus to restart.
Click to expand...
Click to collapse
I did it!
I renamed 0.78olinex file to kovsimg.nbh, put it on formatted card and on a second or third try it started flashing the SPL. But at that time the tricolour bootloader (don't know if it mattered or was a coincidence) was started by hardspl RUU program from PC via USB (the program showed error but phone flashed - from the SD it seems)
Then I had no problem flashing ROM from SD (now my X1 switched to headphones forever but that's another problem )
Iinitially I had stock spl 0.78 I have to mention.
described it here:
http://forum.xda-developers.com/showthread.php?t=718697&page=2
Thanks for info with that method for HTC P3600. however it is for much newer 1.20olinex so I doubt it was designed for X1 ?
przemke said:
I did it!
I renamed 0.78olinex file to kovsimg.nbh, put it on formatted card and on a second or third try it started flashing the SPL. But at that time the tricolour bootloader (don't know if it mattered or was a coincidence) was started by hardspl RUU program from PC via USB (the program showed error but phone flashed - from the SD it seems)
Then I had no problem flashing ROM from SD (now my X1 switched to headphones forever but that's another problem )
Iinitially I had stock spl 0.78 I have to mention.
described it here:
http://forum.xda-developers.com/showthread.php?t=718697&page=2
Thanks for info with that method for HTC P3600. however it is for much newer 1.20olinex so I doubt it was designed for X1 ?
Click to expand...
Click to collapse
I don't know it the devices have something in common, but I thought it could help you.
The version is depending on the Devices etc. Like you know on other programs one program is called 1.2 the other 0.85 or 11.5, for that HTC P3600 it is 1.20.
The latest for X1 is 0.78
I am glad that it helped you
and hasn't bricked your device
About Headphone: I had the same problem several times, sometime it disapears after a time or I plugin in and out the headphones until it disapears (after every in/unplug wait some seconds so winmo can refresh it)
I read that there is a contact that is closed when headset is inside and is not opened when unplugged like you can see here:
opened:
| |
| |
/ |
| |
|_|
closed:
| |
| |
| |
| |
|_|
neoofoox said:
I think it doesn't work. In the instruction for SD-Methode there you have to HARDSPL first... You can read it here.
__________________
Edit:
First of all before you try it, think about that, that I am not responible about any damages etc. because the instruction is not for X1 but it might help you if you really can not flash it via US
I found a thread (other mobile phone) but maybe that is working, you have to use a HSPL for X1 of cause.
You can give it a try and if it is working you can tell, so it could be added to HSPL thread.
Click to expand...
Click to collapse
This doesnt work. When invoking the SSPL-TRIN.exe only restarts the device and nothing else.
Heres what i did:
1) grabbed RUU_Signed.nbh from X1_HardSPL_V1.
2) Replaced TRINIMG.nbh with above.
3) Run SSPL-TRIN.exe
device restarts. same version of SPL still shows when booting to tri-color screen.
Hi everybody, first of all I'm sorry if I ask something already discussed..
I have a Diamond with Olinex 1.93 SPL installed and my USB port is not working. I can't charge batteries and I can't connect with PCs; only the headphone is working.. I need to re-apply original conditions to return my phone on warranty..
I restored the original Italian ROM 2.03 (from HTC site) putting it into the 4gb memory via bluetooth and installing it from internal memory; then I'm trying to restore the SPL putting the original HTC SPL nbh file into the memory installing it booting from internal memory. But after the process is completed and I reset, I have always the 1.93 by Olinex version on the display.
I tried with a lot of signed and unsigned versions of SPL, the process is always completed but anything change.
Could you help me and tell me what to do? Is it possible to change SPL without USB port using bluetooth (to copy diamimg file) and booting from the phone? Thank you for your help...
this phone got brick due to updating of a rom without hspl
and now this is happening to the phone when trying to do anything
It is just going in and out of the bootloader.
The message in the red part is " TOPA*** 32M
SPL-1.33.01 iNex
MicroP-Topaz (LED) v10
TURBO HW/TURBO SW
The message that is in the green part is "NO TP MFG DATA. UPGRADE ROM CODE ERROR"
i tried to search but to no avail...this is for my friends phone
All is hope not lost....
I got something similar recently.
Have you got the right SPL version?
SPL-1.33.01 iNex is for as 6.1 rom, I believe you need 1.83 later for 6.5 roms.
I connected phone to pc, re-flashed the corresponding spl and rom, and everything worked.
If it wont connect to pc, try the method of flashing rom using SD card as stated in thread...
http://forum.xda-developers.com/showthread.php?t=520312
AntonyWatson said:
I got something similar recently.
Have you got the right SPL version?
SPL-1.33.01 iNex is for as 6.1 rom, I believe you need 1.83 later for 6.5 roms.
I connected phone to pc, re-flashed the corresponding spl and rom, and everything worked.
If it wont connect to pc, try the method of flashing rom using SD card as stated in thread...
http://forum.xda-developers.com/showthread.php?t=520312
Click to expand...
Click to collapse
thanx will try and let you know how it goes
upgrading HSPL will solve the issue, search and read harder next time.
here is my problem. yesterday i tried to flash Shaks.Pv4.30Full_DiamondKB rom, from ROM.dia.1.7.0_100625. i did mtty (task 29) and started to flash as i did many times before.
however at 6% flash my hdd decided to make an epic fail, and died. after i sorted out my computer (new hdd, new win7...) i did mtty again (worked fine) and tried to flash. however (at 1%) now i get error 226:
when i reset phone goes directly into bootloader and gives: "Upgrade ROM code error. Please try again"
i have tried to flash Gen.Y D2 R5.5 WWE, RaL.GT1K, ROM.dia.1.7.0_100625, Duttys_5.2.20764.1.4.3_V4_Full_CVSD__3.02_, RUU_Diamond_HTC_WWE-ME_1.37.456.2_Radio_Signed_Diamond_52.26a.25.09_1.00.25.03_Ship (stock diamond), RUU_Victor_TMO_UK_1.37.110.3_Radio_Signed_Diamond_52.26a.25.09_1.00.25.03_Ship (stock mda compact 4), and tlr-diamond-3.08.07.16.
all other roms fail at 1%, but tlr rom fails at 16%, and stock diamond and mda roms fail at 13%.
my phone is mda compact 4. before i have flashed hardspl olinex 1.93 unsigned, and radio 1.17 (from blackstone).
at the moment i really don't know what should i do next (i'm hoping it's not completely lost because i can get into bootloader), so any help would be appreciated.
Damn... This is Harsh.. I Hope someone can provide you with a solution.. I'm subscribing to this thread just in case something like this happens to me also
well, officially, my mda compact was bricked
but fear not, it can be resurrected, via JTAG (some shop did it for a price)...
however i do have a question, now when i enter bootloader it says:
DIAM100 64M
RIFFBOX RESURRECTED!
PSOC-Vict Stage_PVT v0x20.
now i wonder if it's ok to flash again unsigned HardSPL, and custom rom?
hello,
i just got a kaiser and i wanted android on it. accidentaly(yes i know) i flashed it to nand. my real problem is: i have incubus26Jcs superfroyo rls15, but i have no sound.
i tried flashing the radio, but with the radio's i tried it says error 262:update error.
i tried flashing back to WM with SD, but it's stuck at the loading... screen.
i tried mtty but it doesn't make a connection.
i tried going back to wm through usb but it stops at 0% with wrong vendor id(i have a dutch kaiser from orange, which has gone bankrupt, and found no stock rom), it also stops at non-stocked roms with update error.
i have read: http://forum.xda-developers.com/showthread.php?t=423486
http://forum.xda-developers.com/showthread.php?t=420683
http://forum.xda-developers.com/showthread.php?t=533976
http://forum.xda-developers.com/showthread.php?t=903478
and lots and lots more.
i also can't get HardSPL onto my kaiser, as it still stops on the loading screen(with the SD card).
does anyone have a solution for me? or can i only have a silent(only vibrating) kaiser with android?
useful information:
tri color screen:
kais130
spl-1.56.0000
cpld-8
radio's tried:
1.70.18.02, 1.71.09.01.
WM stock roms tried:
RUU_Kaiser_HTC_NLD_3.29.404.0_radio_sign_25.83.40.02_1.65.17.56_Ship
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship
KaiserCustomRUU.exe
other tried:
kaiserdiagtest1.zip
kaisercustomruuv1.zip
mtty v1.42
kaisdiagsd.zip
please help
greets
RVerverda said:
hello,
i just got a kaiser and i wanted android on it. accidentaly(yes i know) i flashed it to nand. my real problem is: i have incubus26Jcs superfroyo rls15, but i have no sound.
i tried flashing the radio, but with the radio's i tried it says error 262:update error.
i tried flashing back to WM with SD, but it's stuck at the loading... screen.
i tried mtty but it doesn't make a connection.
i tried going back to wm through usb but it stops at 0% with wrong vendor id(i have a dutch kaiser from orange, which has gone bankrupt, and found no stock rom), it also stops at non-stocked roms with update error.
i have read: http://forum.xda-developers.com/showthread.php?t=423486
http://forum.xda-developers.com/showthread.php?t=420683
http://forum.xda-developers.com/showthread.php?t=533976
http://forum.xda-developers.com/showthread.php?t=903478
and lots and lots more.
i also can't get HardSPL onto my kaiser, as it still stops on the loading screen(with the SD card).
does anyone have a solution for me? or can i only have a silent(only vibrating) kaiser with android?
useful information:
tri color screen:
kais130
spl-1.56.0000
cpld-8
radio's tried:
1.70.18.02, 1.71.09.01.
WM stock roms tried:
RUU_Kaiser_HTC_NLD_3.29.404.0_radio_sign_25.83.40.02_1.65.17.56_Ship
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship
KaiserCustomRUU.exe
other tried:
kaiserdiagtest1.zip
kaisercustomruuv1.zip
mtty v1.42
kaisdiagsd.zip
please help
greets
Click to expand...
Click to collapse
You must SPL, do you have? 3.29 at least
you must have a radio newer than 1.70.X (use 1.70.18.02), didn't you read the thread "how to replace windows mobile with android" ?
If you can't update radio through the SD, use KaiserCustomRUU.exe: put it on a file wherever you want and put the radio you want also on the file and name it "RUU_signed.nbh". It's all on the threads man!
here's the SPL thread...http://forum.xda-developers.com/showthread.php?t=498320 USE THE SEARCH MAN!
no sound is because of no radio updated...