Database Develop

just bought tilt but have some issues

hi if anyone can help thatll be greatly appreciated. I just bought an att tilt 8925, and well this is what happens. it boots up and goes into windows screen and then as soon as it goes into the main screen it vibrates a whole bunch of times and then just shuts down. can't get it to active sync to reflash because it wont stay on after it goes into the main screen any help would be appreciated!

Where did you buy this Tilt? Did this happen straight out of the box or have you already flashed it?
Search on how to manually get into boot loader and re flash; http://forum.xda-developers.com/showthread.php?t=383904

i bought it like that. the phone is in great condition. all features seem to work but i think the guy did a hackjob on the rom so it's not working right and im all new to trying to get it to work.

Since it's new... start with some baseline work.
1. Do a hard reset.
2. Record ROM and radio versions
3. If it comes up... consider loading the ROM of your choice.
I see you're new here so PLEASE read my signature.
Thanks,

Your best bet would be, download the OEM official Tilt ROM, Manually get into boot loader, then flash it. There are also other methods of flashing such as from your Sd card. The previous mentioned link has allot of answers.

okay i just tried entering bootloader but it wont get into the screen. i hold the camera buton and hold the soft reset button at the bottom of th phone but it just boots up normally. anything im doing wrong?

this concludes the beta test...

Hello all,
first, a big thanks to all the rom developers around. You transformed my Diamond in a usable and enjoyable tool.
What happened to me tonight is very frightening. In fact, I cannot believe what happened.
And this is the story: I was at a birthday party and later in the evening I checked my phone : it seemed to have frozen, so I rebooted it as I do sometimes when I have no other choice. But this time something strange happened : I got the following message "this concludes the beta test of this software release. thank you very much for your time and effort in helping make this a great product for our customers" - what the ... ? No way to make a call, the message is impossible to remove... completely blocked !!!
I don't remember exactly the rom I flashed last because I sometimes change. It might be a dutty's release (75%M sure) - anyway I was in a very bad situation because my wife wasn't feeling well and I couldn't call her without finally borrowing a phone from someone.
I will flash a new rom tomorrow and I hope that the message will disappear but I can tell you that it is a very strange feeling when suddenly your phone refuses to operate normally. It's a nightmare.
I hope that someone has an explanation for this because I don't want to go trough this situation ever again, it's just so annoying to have a phone which tells you "No you can't use me; your trial period has expired" when you need it he most.
Thank you for your opinions in advance

Have you tried a hard reset?

Yep same problem here.
Using duttys 1.93 - Can't get to his website either.
Hard rest does not work - had to reflash back to branded (Telstra) ROM

i'm having the exact problem right now, what can i do to fix this? someone told me to reflash it but how? i'm VERY new to the diamond
hardreset does not work
I bought the phone from a person so it's second hand. The seller did mention he updated the ROM, I'm assuming this is the cause of the problem? help please
thanks!

I am getting the exact same problem.I do not know what to do.

Sigh and since my computer will not sync, I cannot reflash it. Hard set is also a no go.

ya I cant sync it with my computer either... i'm searching other sections on this forum and I cant seem to find one that teaches you how to flash without syncing with the computer

OK i got it well kinda sorta. If you hard reset and just use the date taht dutty had then your phone will load. Do not correct the date and you should also change the date on your computer so that it wont sync. Then donwload his new rom or whatever rom you prefer and then flash it. Then change the dates back. It worked for me.

thanks.. do you have the link for the new rom?
I'm going to give it a try

The link it dutt'y new rom is here http://rapidshare.com/files/162091111/Ruu_Signed_duttys_diamond__V2.9_5_2_20275_RTM_Full_MSVC.zip

just a question how do you flash it?
can you help me? i'm very new to this phone

I had the same problem last night- expired beta software. If I do a hard reset I believe I will loose all the info on the phone, is that correct?
I was thinking that changing the date will work, is there another way to change the date without having to loose the info?
Someone has a reliable link to an instruction on how to flash the ROM?
I am also using throy 2.3, to find the latest release please go to WWW.DUTTYTHROY.NET
Any help appreciated.

!everyone! you can flash roms from bootloader. hold volume down and the little red reset button, keep holding vol down untill bootloader. at the tri color screen, run ruu from host pc. everything will be fine with this method. just like activesync.

ok i to change the time and stuff and it actually can sync using active sync.. however.. when tried to install HSPL 1.24 after the part where the phone will turn black.. i click on the DiamondCustomRUU as instructed
but it says this "The application failed to initialize properly (0xc0000135). CLick on OK to terminate the application"

Is there a way I can recover this without losing all that is on my phone?

Do anybody know the password for the latest ROM 2.9 from Dutty? His page is unavailable right now....

Duttys V2.9 RTM Finale

someone please tell me how to flash.. from scratch? i hard reset my phone.. and i cant get HSPL to work. When i install the activesync way, the black screen turns on then i cant open DiamondCustomRUU
if i do i the bootloader way, when i connect from the three colour screen it cant pick up the phone because it says i'm missing Qualcomm CDMA Technologies MSM
please help been stuck for hours already

i won't flash Duttys ROM again!!! Right now i need my phone and it doesn't work! And if i reflash it i lose my data....
never again!

its you have a problem with duttys rom
you need to use his thread to point out your problems....
not this one.

Restore from Bootloader?

I tried to upgrade my 8125 using Shelltool earlier this week. I used the tool successfully before and so I was assuming that things would just go well.
Unfortunately, I ended up being stuck on the bootscreen. I can also still go into Bootloader mode and so I figured all I need to do is to download the Wizard Love ROM, go into Bootloader mode and apply the ROM to restore an older version. Well, for some reason the RUU utility keeps telling me about a communication issue even though I already disabled USB in Active Sync and I also killed the program using Task Manager...
What am I missing here? I am hoping that someone can enlighten me...
Thanks,
Jens

For some reason I was finally able to flash my 8125 with the Wizard Love ROM this morning. Flash completed and I was back to an old working ROM.
Unfortunately, when I flashed it with the latest CR86 it flashed fine, but then I am stuck on the Bootloader screen. Already tried it twice and just running it a third time, but I am puzzled...
Any help?
Thanks,
Jens

jstraten said:
For some reason I was finally able to flash my 8125 with the Wizard Love ROM this morning. Flash completed and I was back to an old working ROM.
Unfortunately, when I flashed it with the latest CR86 it flashed fine, but then I am stuck on the Bootloader screen. Already tried it twice and just running it a third time, but I am puzzled...
Any help?
Thanks,
Jens
Click to expand...
Click to collapse
its on its last flashes my friend(or maybe just tire of custom roms)
but just before mine died, it would do that, until i was stuck on the bootloader and the screen would just die, i would have to leave it off then turn on but the same, after that i just left it alone
i could not flash anything on it and i could not see it suffer anymore
i still have it but dont have time to bring it back to life, at least it blinks at me

That's what I was worried about...
Strange thing is I probably only flashed it about 10 times... Very frustrating!
Thanks for your reply!

Hmmm, I just tried the old Wizard Love ROM again and it worked right away.
What am I missing here? I am trying to get to the new CR85 6.5 ROM, but I always end up being stuck on the bootscreen loader. I mean it shows me the HTC screen, but then it goes straight to the bootscreen...
Any suggestions?

I am back in business!
It turned out that flashing back to an older ROM disabled my HardSPL. I guess a case of user error on my end...
Anyhow, I also experienced the fading display mentioned above and I think that's just a sign of a weakening battery. It seems that the phone doesn't charge fast enough over USB in Bootloader mode.
So, if you run into the same problems like me:
- Charge your phone using the charger when you are stuck in Bootloader mode for extended amount of times!!!
- Flash an old provider ROM or Wizard Love ROM
- Re-apply HardSPL if needed
- Upgrade to a newer ROM
Cheers,
Jens

T5355 stuck on "TOUCH Diamond2" screen

Hi guys!
I have been trying everything that I could find on XDA to fix my problem.
I got this HTC clone a few weeks ago, and it was working fine.
I decided to install a UI on it and it worked fine. After a while I got bored of the UI, so I decided to uninstall it. After the uninstall, the device indicated that it needed to be restarted. I did that, but after it rebooted, it started to reinstall Windows Mobile 6.1. I was annoyed by this, but was like, whatever, and let it continue.
Where the real problem started was when the device froze up (I left it alone for over an hour, but there was no change).
I then had to pull the battery. After I put the battery back into the T5355 it just keeps getting stuck on the "TOUCH Diamond2" screen.
I tried all the hard reset and soft reset tricks I could find and have no been able to either setting it back to factory or bootloader mode.
I was able to find a post that described how to place the boo.ini, flash.bin, and loader.bin file onto my micro sd card. I was able to to get the boot.ini an flash.bin files, but can't seem to find a loader.bin file (it that the actual OS rom?). I then found a post that showed how to use HiSilicon IDT to force the install of the OS Bin file (C02_HTC_20091102_R2127_英全视角B包.bin).
I followed the instructions on placing the T5355 into "Download" mode and pushing the OS bin fine to it.
I am able get the IDT software to detect the T5355 and start pushing the install, but the damned thing ends up giving an XLDR error.
PLEASE! PLEASE! Somebody help me! This phone is brand new and really want to get it working again.
Model: HTC(?) T5355

Please help me someone!!
Is there anyone out there that can help me???
I am so frustrated and can think of what else to do!
The biggest problem I have is that I can't use ActiveSync. If I could use that I wouldn't have much trouble.
Does anyone know how to use HiSilicon's IDT properly? The instructions I was working off of are in Russian. I think that a need a loader.bin file for the T5355 that I can put on my micro sd card...or maybe not...I don't know.
I just really want to get this device back to factory settings.
Please someone take pity on me!!!

enter bootloader [those orizontal strange colors]
try flashing a new rom. you may search and download the original 6.5 build from HTC
to enter bootloader, press "volume down + shutdown button" and then flash the rom
ATENTION: plug the USB cable, wait a few seconds, you should see USB on the lowest white color, then do the flashing job

I don't think you would be experiencing these problems with an original topaz

Please take care this is a HTC CLONE

Pisca said:
Please take care this is a HTC CLONE
Click to expand...
Click to collapse
oups, I'm high resolution on monitor, I thought it was saying "done" not "clone" ) ... there's a thread dedicated to china clones, look here http://forum.xda-developers.com/showthread.php?t=619643

run with a rom in bootloader, it shud work

enter bootloader [those orizontal strange colors]
try flashing a new rom. you may search and download the original 6.5 build from HTC
to enter bootloader, press "volume down + shutdown button" and then flash the rom
ATENTION: plug the USB cable, wait a few seconds, you should see USB on the lowest white color, then do the flashing job
Click to expand...
Click to collapse
DalvuS, thanks for the reply, but the issue is that I can't seem to get into bootloader mode . I wish I could. The T5355 seems to be stuck in the middle of wm 6.1 install. I need to somehow wipe the install and be able to push a reinstall back to the device.
I don't think you would be experiencing these problems with an original topaz
Click to expand...
Click to collapse
Exca that comment doesn't help me. It just makes me more sad. I was gipped when I bought the phone . I thought I paid for a "real" Diamond 2.

If you can't to catch the bootmode, looks like hardware problem.
You can't to repair it at home, imho. Try the specialized service.
..............
... and: are you sure about key combination for bootloader screen for CLONE?

Hello people, how can i dump my rom from my phone (mfu w71) for backup, because i cannot find any rom in english only in chinese. I started to dump the chinese rom with some chinese kitchen (K3系列ROM工具), but i'm stuck. I do not know to do anymore i have extracted ROM, SYS folder. I think it would be good to start another section on this forum for the chinese phones.
Some help from experienced cookers would me be much apreciated.

My T5355 is up and working!!!
Thanks to everyone who replied to my post!!!
I discovered that the problem was that the PC I was attempting the install from was running an AMD based processor.
I tried on the family laptop (which runs an Intel processor) and the install worked!
I AM SOOOO HAPPY!!!
b0gdi good luck with your issue. Try doing a search here in XDA for "dump my phone".

nothing[switched off] -> press start -> command -> bootloader -> bootloader commands -> system start -> play
checking one by one by interfering would have done the trick
I'm glad to hear that... so now you're ok
NEXT !

help me please
i Have Flash my phone 100 times with IDT for WM6.5 and WM6.1 all the versions my phone is T5355 Hot D2 but in one day i flash a rom that kill my phone the phone are conntinue to work but no screen picture only light i have try some russian Rom that kill my phone
the phone was been on guerant so i send him back to my supplier thay fix the phone but the factory said that thay need to change the screen so now thay really change the screen and the phone back to me with WM6.1 some New version 20.1.2010 some think like this i have made a call but the phone hang up and not make calls so i try to put him Back the WM6.5 English ROM that i use with this phone before i try to Flash Russian ROM that brake me the picture of the phone and block me the Bootloader Combination of SEnd+End+Power so that way i send him to repair .
so i try the English Rom that i have use before he DOwnload the Flash Fine but now the screen are stop to show picture But the Bootloader are work fine
so i try all the Roms that i have and all the same the screen dont want to show picture
some body have a same problem or can help me with this ?

HTC Vogue on Sprint - No 3G

I've searched everywhere and I can't find an answer.
I purchased an HTC Touch for Sprint today, booted it up/unlocked it, and flashed Android. I realized that I never setup Power Vision in WinMo prior to unlocking/installing Android. I've tried to reinstall the Windows Mobile 6.1 stock rom that came with the phone so that I can get to the EPST menu and update my PV info, but the rom freezes at 29% when I try to flash it.
I'm not vary experienced, so please pardon me if there is a stupidly easy answer. I've flashed a 6.5 rom, but I couldn't figure out how to get to the EPST menu on it to auto-configure my data settings.
If anyone can help me out, it would be greatly appreciated. Thanks!

i also had a lock-up when flashing the official sprint ROM once, and i created a new windows account, re-downloaded the rom, and it worked. no idea why

Hey, what do you mean by a new windows account? Thanks!

new user/login

GeJohnO said:
I've searched everywhere and I can't find an answer.
I purchased an HTC Touch for Sprint today, booted it up/unlocked it, and flashed Android. I realized that I never setup Power Vision in WinMo prior to unlocking/installing Android. I've tried to reinstall the Windows Mobile 6.1 stock rom that came with the phone so that I can get to the EPST menu and update my PV info, but the rom freezes at 29% when I try to flash it.
I'm not vary experienced, so please pardon me if there is a stupidly easy answer. I've flashed a 6.5 rom, but I couldn't figure out how to get to the EPST menu on it to auto-configure my data settings.
If anyone can help me out, it would be greatly appreciated. Thanks!
Click to expand...
Click to collapse
If your using the unlocker .40 then that's why, use unlocker .34, only use unlocker .40 if your relocking your phone and flashing back to stock to send in for warranty repair, some phones don't like to flash from usb when relocking.
you might be able to get it to flash from the memory card if you put the nbh from the exe onto the mem card, etc.. or just try to flash a 6.5 rom.
if it just so happens that you can't flash anything and you can't go anywhere past the bootloader, take it into the store, tell them you turned it on and it wouldn't boot and they will take it into the back and reflash it, then start again from the beginning, but remember to provision your phone first.

mrono said:
If your using the unlocker .40 then that's why, use unlocker .34, only use unlocker .40 if your relocking your phone and flashing back to stock to send in for warranty repair, some phones don't like to flash from usb when relocking.
you might be able to get it to flash from the memory card if you put the nbh from the exe onto the mem card, etc.. or just try to flash a 6.5 rom.
if it just so happens that you can't flash anything and you can't go anywhere past the bootloader, take it into the store, tell them you turned it on and it wouldn't boot and they will take it into the back and reflash it, then start again from the beginning, but remember to provision your phone first.
Click to expand...
Click to collapse
How can I flash 2.31 when I cant bring up activesync? (I dont have 6.1 installed)

mrono said:
if it just so happens that you can't flash anything and you can't go anywhere past the bootloader, take it into the store, tell them you turned it on and it wouldn't boot and they will take it into the back and reflash it, then start again from the beginning, but remember to provision your phone first.
Click to expand...
Click to collapse
Then take it to the store and have them reflash it for you

put your phone in bootloader mode (tricolored screen, hold camera and power, then press and release soft reset). connect to your computer. download andn run the official sprint gps rom (not the stock rom; can use with unlocked phone, won't mess with the unlocker, here, under shipped gps rom newer version in post 1), and allow it to flash your phone. get 3g working however you can - even call sprint if you have to. then flash back to android.

tatnai said:
put your phone in bootloader mode (tricolored screen, hold camera and power, then press and release soft reset). connect to your computer. download andn run the official sprint gps rom (not the stock rom; can use with unlocked phone, won't mess with the unlocker, here, under shipped gps rom newer version in post 1), and allow it to flash your phone. get 3g working however you can - even call sprint if you have to. then flash back to android.
Click to expand...
Click to collapse
It's possible that he won't be able to flash at all, when mine screwed up and wouldn't let me flash none of the roms worked, even offical ones

Fixed it. Flashed a custom 6.5 rom, ran activesync and flashed a .31 rom, installed stock rom, provisioned. Thanks for the help! I would have never figured out I had the wrong unlocker, haha.

GeJohnO said:
Fixed it. Flashed a custom 6.5 rom, ran activesync and flashed a .31 rom, installed stock rom, provisioned. Thanks for the help! I would have never figured out I had the wrong unlocker, haha.
Click to expand...
Click to collapse
Cool, glad to see you got it all figured out!