Does anyone know of a supplier of IP65 rated cases (or something close to this), along the lines of the otterboxes http://www.otterbox.com/products/pda_cases/1900/ ?
There used to be a company that made clear perspex cases that I don't believe were rated to IP standards, but they looked quite nice. Can't find them anywhere on the net though, and cases purposly made for the Athena seem few and far on the ground.
TVM in advance!
Have you tried contacting OB, and seeing if they have a box that will fit the 7500? They prob. do...
dude, where do you work !! in a war zone ? don't forget that the athena can only take so much shock, although the case might be up to it you will have to pad it to protect the phone.
What an ugly case!
The ameo/athena still gets "ooooohs and aaaaahs" along with "is'nt it pretty, (pretty BIG), how do you answer it???" most times that people/nokia users see it.
OK, the ameo is'nt a beauty and its not small, why would you want to make it uglier and bigger?
maybe you have a job where it gets knocked around alot (like a night shift raiding villages in iraq under mortar fire - (well noticed ice-coffee)
however, i think i know why you need to protect your valuable piece of kit, and also why making it uglier/undesirable and bigger/impossible to lift and steal.................
Ive a feeling brummagum is not a real place??? however it is code for "i live in birmingham but i want out!!!!
I have seen many a nice phone stolen and many a person in birmingham robbed by demented hoodies that could spell "ppc"!
good thinking!!!! Now, how do i produce a 100000volt current that pulses across the metal housing of the ameo and frys any would be muggers
Did you look at Pelican? With some modifying something like this may work for you:
http://pelican.com/cases_detail.php?Case=1060
You'll need to add some padding inside to keep the Athena form rattling around in there but you could utilize the extra space for accessories.
EDIT: This is IP67, not IP65 but, Christ, what are you going to do with it???
hedgemonstahinz said:
...however it is code for "i live in birmingham but i want out!!!!
I have seen many a nice phone stolen and many a person in birmingham robbed by demented hoodies that could spell "ppc"!
good thinking!!!! Now, how do i produce a 100000volt current that pulses across the metal housing of the ameo and frys any would be muggers
Click to expand...
Click to collapse
Yep, Birmingham, Twinned with downtown Baghdad.
To be fair, I think in my OP, I went a bit OTT with the description, and whilst it would be nice to have a device that can save me in the event of the common drive-bys that go down, it was more of a well padded crystal case, something along the lines of http://www.pdamods.com/proddetail.asp?prod=CRDLX50 that I was after.
Oh, if only I'd used the search...
http://forum.xda-developers.com/showthread.php?p=1965541
That Pelican 1060 case I linked to above also has a foam insert in the "Accessories" section.
Im looking at either getting the nice leather case, the official HTC one "Diamond Pouch PO S390" (seen in this thread here... http://forum.xda-developers.com/showthread.php?t=403691) or this http://cgi.ebay.co.uk/HTC-Touch-Dia...photoQQcmdZViewItemQQ_trksidZp1713.m153.l1262
Anyone got a crystal case for their Touch Diamond? If so whats it like?
Im looking to protect my Diamond as I know how easy to scratch and mark they are (its doing ok at the moment but id like to keep it protected and looking like new)
Thanks, any feedback would be appreciated
I got one yesterday ( for $15 CDN ==" since i didn't want to wait for shipping)
from what i've seen so far
Seems like a great case, it is a tight fit for the diamond, so there are some worries with regards to upgrading the battery in the future....
But aside from that, it does its job of protecting my diamond and the change in dimensiosn is barely noticeable to me.
Moderators Could you move this to Diamond Accessories please, sorry, thought I had posted it in there, but hadnt.
Thanks for the feedback, sounds positive, I want to get a leather case, but at the same time its nice if i can just use it rather than get it out of the leather case to use it.
Mmm, food for thought!
yse mods please move the thread ^^"
i was contemplating the leather case as well before...
the benefit to the hard case is that its as it doesn't make it more difficult to access the phone and you dont need to take it out of the case to do anything
the only pet peeve i have with my case is that the power button on the top left is now a bit harder to press due to the case
just my 2 cents
Most of the crystal cases i have come across are dust magnets...so that puts me off them. Ive ordered the pouch today from Expansys...the official one although i have to wait 3 days before they come into stock..
Had one of these plastic cases on a samsung phone - the case cracked after a few days Lets hope these are different
One reason why im staying off silicon/crystal cases is so that I could enjoy the flushed screen.
Strange.. U guys don't seem to find it a luxury to have a flushed screen. I love it as I don't need to finger-wrestle in order to tap the 'X' button...
MasK, thats a very good point! I know what you mean there, very frustrating.
Mmm, think im just gonna opt for the Leather Case. Think I would just get frustrated with the Crystal Case.
Thanks for your feedback and comments guys.
Slightly off topic...
But do you think somebody (HTC or after-market company) will produce a soft touch / matt finish rear cover for the Diamond? I mean, its an easily replaceable, small piece of plastic and would protect (or hide) fingerprints and make it less scratchy if its soft?
Just a though... if any external companies looking it at, I'll pay £2.99 for a rip off soft touch back cover on eBay from Hong Kong
DG
In 3 weeks I'm off for a week of snowboarding and I'll be taking my HD2 (with Satski ) with me. Before I go I want to get a case which will protect the HD2 when I fall (and I will fall.....LOTS!).
It doesn't have to be pretty as it's primary purpose will be to protect the phone.
I've had a search on the forum and can't find any recomendations for cases for skiers and snowboarders.
Cheers,
DC
I have seen lot's of these hard-cases on ebay. please have a look there.
Something "HD2 Protective" and see what you find. It should have hard plastic cover on the back, or maybe steel cover's. that would be the best.
I think you would be good with a real leather case as well. just something to break the bump's good. you will fall... but you will probably not ruin your HD2 but i guess you want to be on the safe side
on the site of PDair you can find a Aluminum Metal Case for the hd2
Vote 1 for bubble wrap!!!!!
focuswrc2006 said:
on the site of PDair you can find a Aluminum Metal Case for the hd2
Click to expand...
Click to collapse
A metal case will likely interfere with the signal reception of the device... ever heard of the cage of faraday??
But if this works, i'd like to know!
leave it in your hotel room mate, if you drop it while boarding you probably wont find it again anyways lol
DavidC1980 said:
In 3 weeks I'm off for a week of snowboarding and I'll be taking my HD2 (with Satski) I've had a search on the forum and can't find any recomendations for cases for skiers and snowboarders.
DC
Click to expand...
Click to collapse
while snowboarding the device should best be protected "inside" your main "front forfearm", "under" your elbow. sure that if you if you want to keep it a bit functional and protected, main problem will be humidity.
if you plan using a GPS, and stereo BT headset mind not losing your way too late as std batteries will fly quick
HD2
+rungps.net AB8
+ metal case (ebay 300378299986)
+ portable-micro-usb-charger-1500mah (mobilefun)
+ stylus?
check your waranty, & good luck
DavidC1980 said:
In 3 weeks I'm off for a week of snowboarding and I'll be taking my HD2 (with Satski ) with me. Before I go I want to get a case which will protect the HD2 when I fall (and I will fall.....LOTS!).
It doesn't have to be pretty as it's primary purpose will be to protect the phone.
I've had a search on the forum and can't find any recomendations for cases for skiers and snowboarders.
Cheers,
DC
Click to expand...
Click to collapse
The best one for your request:
http://www.amazon.com/Otterbox-Defe..._1_2?s=wireless&ie=UTF8&qid=1319608310&sr=1-2
I'm looking for a specific case for my nook color. Sadly, so far, none of the ones I have been looking at fit the bill.
The needs are:
1. useable inside the case.
2. waterproof (under 10 meter depth, mostly to keep rain or accidental drops in the tub from killing it)inside the case
3. Able to take a drop of 4 feet and not damage the Nook Color
4. able to take the weight of a person accidentally sitting on it.
I'm not worried about charging or listening to headphones while it's in the case. But, so far, either I've found ones like the oberon ones, which fits the shock and structural needs but not water needs, or ones like the expensive thick ziplock bag, which does not provide much more than waterproofing.
Is it just nuts for me to want to protect and armor my e-reader to a point I can use it when waiting for dawn while goose hunting, or out camping?
What you are looking for is made by Plexicorp, based out of San Francisco. They make a variety of products using a patented transparent aluminum which was developed in 1986 by Dr Mark Nichols.
Oh ha ha. we all know Scotty gave the formula to him, two finger typing on an old mac.
Seriously, a metal backed cover and frame, with padding and waterproofing, and a transparent screen cover like the fancy thick ziplock bag would work. But, as I said, everything either has the drop/sit ruggedness and not the waterproofing, one has the waterproofing and not protection, and one has the protection and waterproofing, but you can't use it in the case.
it's beginning to appear like I'll have to break down and design one my own self, since none of the makers are filling my needs. you'd think with all the campers, hunters, fishers, beachgoers, pool gatherers, and even readers soaking in a bathtub, let alone drunk college students, someone would make SOMETHING like this.
sounds like you need to be more careful with your 250 dollar toy. go get a travel case lined with foam. water proof, shock proof, and idiot proof. after that put the travel case on a three foot leash and strap it to your neck. only hit the ground if your a midget.
http://www.amazon.com/Pelican-1300-Case-Camera-Yellow/dp/B00009XVKW
You will look real snazzy walking around with this.
or, I guess you can also infuse it with the power of all mighty Odin and hope that works. i think your asking for a little too much. hunters go outside to hunt. fishers go outside to fish. hikers go outside to hike. any of the above that would use a product like the nook would just use the ziplock bag style or a hardcore pelican case and protect the **** out of it. and not take it out of said case during the hurricane.
most outdoor people would just use this
http://www.amazon.com/Pelican-1050-Micro-Case-Blue/dp/B001CNNEXY
but i doubt you want to put that in your pocket at 3.1" thick. but even with that you want a flap to store **** in. if i were you i'd start praying.
Wow, I have to say, you've got me wondering what you're planning on doing with the Nook! I'm intrigued though, I've thought myself it would be nice to have a super rugged gadget. It looks like the Otterbox case is just going to help with impacts, etc. I did find this old thread which might help..
http://forum.xda-developers.com/archive/index.php/t-749995.html
Ok. the cases I'm seeing posted fall into category 3, has the sit proof, crush proof, waterproof, but not USEABLE inside the case.
let me show you what I am looking at. Of the premade factory cases:
Option 1- URL redacted because of silly posting rules, but the Trendy Digital waterguard waterproof case. Has the waterproofing needed, but does not provide decent enough protection otherwise.
Option 2- Oberon cover, replacing the plastic inserts with either sheet steel or aluminum plate. But, this is the opposite issue from Option 1. Not waterproof.
Option 3- One of the cases mentioned. But, doesn't allow the device to stay waterproofed when you want to use it.
What am I wanting to do with it? Well, I want to be able to take it hunting, to look up tides, help identify geese, or when it's dead slow, read a book. It's often in the rain, around lots of salt water, and can get dropped or stepped on if some geese swoop in and I need to hammer. Or, take it camping, and not worry about getting caught in the rain, dropping it, or falling on it trying to carry it about. Many of these cases have 2, even 3 parts that would work, but without the whole enchilada, it's not going to do what I need.
Edit: BTW, I've taken an ipod 5g video out for 2 seasons and it's still working. the NC is actually meant to be a replacement for it, as the battery is slowly dying.
I am using a Trident Aegis on my NC. I tried it out in a medium (7"x10") Coleman waterproof pouch and the touchscreen worked through the plastic.
These are the only two reputable brands I could find. Others I found were just too expensive (imported). And let me just throw it out there, these still feel very expensive to me, but I'm only willing to pay cause they're reputable brands.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm most looking forward to pics of the products, because online it's really hard to tell anything. Especially the pics of the insides like the corner insides etc (I think more details can be captured with flash ON), whatever you could provide, pic of case applied on the phone etc. For me what matters the most is design (not talking about looks) especially the key features i.e. the lip to prevent the screen from touching any surface, the air cushioned type corners (inside) or anything else I'm missing. Though I do know that these probably already have that.
And any of your opinions and experience related to these products. Like in case of Ringke, as it has a transparent back, Has it got any scratches, too many scratches etc? Has it gone yellowish (the transparent part)? In case of Spigen, Does it have clicky buttons? Does it feel heavy? How grippy is it? Anything related to these two cases even something I didn't mentioned, pros cons, however you like it.
I'm not opposed to buy something better than these brand cases IF it's out there & not popular, but it has to be less expensive & you must've bought and used the product. You can still suggest me anything better even if you haven't used it, not my preferred way, but I'll still look into it.
I'm not looking to throw my phone, just to protect it from accidents. I also know how heavy it gets after applying these covers which increases the chances of drops of an already heavy phone, so the protection has to be the best. If you know of anything lightweight which can still protect similarly (that's why design matters the most) to these cases, you can LMK.
I just want to make sure I get the best thing if I'm paying this much money.
Not important (Just a customer's angry rant) : As Xiaomi already betrayed us by giving too high of a discounts on such a good phone. That's why they're still selling the same stock or IDK what is their plan with this line!!? I didn't returned or went to service centre to complain about the screen bleeding issue. Yes it's still there even after 1 year. So when I buy their phone for Rs. 23K ,8/256 model like 2-3 weeks ago & they give a flat Rs.4k discount on it, It's just straight up back stabbing. I think realistically, so I just knew that they were gonna waste my time at service centre & second it's not that big of a deal. That's why I didn't returned it or wasted my time on repair.
Me as a customer value their product more without any incentive purposes and they as a company doesn't value it. It's just pathetic.
Lol. So big post about cases.
I bought spigen. It looks exactly like in photos. Its elegant, fits perfectly. One thing bad about it is that's slippery in my hands. Kind of annoying but you can get used to it.
Rinkge looks more protective and massive. I wouldn't buy it, cause it makes look like some tank smartphone ( Samsung solid etc). So unless you drop your phone everyday obtain I'd buy spigen.
First of all wow, cause I wasn't even expecting a reply. Well something's better than nothing amirite.
I do all this work, put in all this effort into the post and what do I get in return, basically nothing. And IK what you're going to say that oh it's an old phone, bla bla JUST ZIP IT, alright I don't wanna hear it. Cause IK what the real reason is and that is, this site is dying slowly and daily. Yeah I don't wanna hear any of your crappy argument against it, cause IDGA*. It's the truth, either accept it or move on.
I can hear you lot saying that OUH! your post is big and other crap, again IDC. Cause I tried my best to make it look attractive, it's not my fault that a lazy person isn't ready to read paragraphs on a forum website. And not really a forum, cause most of their focus is on news these days, and excuse me what!!? Testing pc hardware https://www.xda-developers.com/amd-radeon-rx-5700-series-review , wasn't even difficult to find, was on the front page of news. Just shows how much they care.
It's been a long time since I joined this site, at least for me. My english has improved a lot and IK better ways to present the information and still I get less interaction than before when I didn't knew much or didn't knew how to convey my message, maybe that's the reason I went away in the first place. I've made another posts as well not related to this, tried my best to be understandable, still any responses, NO.
You know why I made this thread, to get some opinions, to clear my mind on which one to buy, but did I got that, no, I just had to go with my gut at the end, all that time and energy wasted. Like with any other posts or threads I've made, except some cause of a few helpful people. I was so tired that I forgot to put any tags, which I just noticed, that's a first for me.
And don't think that I'm dismissing the fact that there are no good people out there, there are but you better find them quick, otherwise the time it'll take for the help to reach you, you may have already forgotten about the problem. It's like a gold mine, you better find something or all the work goes into waste. And if you find a truly helpful person you can converse with them 24x7. And don't think every knowledgeable person here is helpful, cause they're not, especially the so called developers, very knowledgeable, but helpful, just forget about it, again not all of 'em. But as I said you better find them in a relevant time or the thread just get rolled into the dust of time.
The developers are just the best, claiming to own this website, that it only exists cause of them and they don't need users. Then why don't you go ahead and close this website for public, you're not doing us any good by providing a crappy service and delivering statements like this. The normal users aren't getting any help anyways, those who really wanna learn something new and make something out of it.
By making statements like these they're only driving the core of this website away, yeah I'll see how long you stay relevant this way. The only one who are benefiting off your ego and butthurtness are freeloaders. Well, look what you have done developers, congrats, you should be very proud.
For me, I guess I'd just have to look for an alternative. Life goes on, it doesn't wait for anybody especially for self absorbed people.
I have both. Spigen is the one I use daily. Ringke did not allow me to use in Brodit car holder. Spigen is a more elegant case ringke looks tacky, but has better corner protection. Both suck with regards to amount of lip on front face to protect screen from drops.
i'm using Nillkin Case for my poco f1. But from the above two you mentioned, i think Spigen case is better option.
Been using spigen since the first day. It lacks side grip, its very very slippery if u try to grab/hold it by fingers with phone lying on flat surface. I wonder how cud spigen not think abt side grip!!
So I wud say go with ringke.
All the best.
Using Ringke since May 2019. back transparent panel still clear as glass with some micro scratches which ain't even visible if not looking carefully. this panel kind of shines like glass and reflects considerable light of you're interested ?.
only con I've found is it makes the phone a bit heavier but for the sake of protection i can live with that much extra weight.
I would like to get of the grid and introduce one more reputed brand into the picture. It's called Kapaver they are well known for thier carbon fibre looking air cushions induced back covers. It costs well around 600rs. On average. And ill tell you as I used it on my previous note 5 pro. Which is a delicate phone, i dnt usually drop the mobile very often but when ever I did it did hit the ground at an Harder pace.
But seriously when i exchanged the old for new poco. I had no regrets of any scratches or dents all cause of Kapaver. So from an user perspective I'll give it a 5/5 for protection but yea it does causes the mobile to look a bit bulkier. But it does make it feel kinda premium. Il urge you to do have a look at it.
Ps. By observing my usage and cover. Many of my friends who used poco did get Kapaver case and they seem to be very happy with it.
Using ringke from the day poco was launched and the case was available. My phone is 1 year old. I prefer ringke cause it's transparent and I can show off skins on the back. It's heavy and you'll feel it for the first few days. If you feel naked poco is already heavy, get Spigen ( do note it's slips a lot). Both are good cases and you can't go wrong with any one of them.
I am planing to get ringke case. I want to know that I am using full screen mode in Poco F1. so how does it goes when we swipe edge for back or when we swipe up for home screen?
I mean does this case create problem or it work well with full screen mode?
Gurkirat_Singh said:
These are the only two reputable brands I could find. Others I found were just too expensive (imported). And let me just throw it out there, these still feel very expensive to me, but I'm only willing to pay cause they're reputable brands.
I'm most looking forward to pics of the products, because online it's really hard to tell anything. Especially the pics of the insides like the corner insides etc (I think more details can be captured with flash ON), whatever you could provide, pic of case applied on the phone etc. For me what matters the most is design (not talking about looks) especially the key features i.e. the lip to prevent the screen from touching any surface, the air cushioned type corners (inside) or anything else I'm missing. Though I do know that these probably already have that.
And any of your opinions and experience related to these products. Like in case of Ringke, as it has a transparent back, Has it got any scratches, too many scratches etc? Has it gone yellowish (the transparent part)? In case of Spigen, Does it have clicky buttons? Does it feel heavy? How grippy is it? Anything related to these two cases even something I didn't mentioned, pros cons, however you like it.
I'm not opposed to buy something better than these brand cases IF it's out there & not popular, but it has to be less expensive & you must've bought and used the product. You can still suggest me anything better even if you haven't used it, not my preferred way, but I'll still look into it.
I'm not looking to throw my phone, just to protect it from accidents. I also know how heavy it gets after applying these covers which increases the chances of drops of an already heavy phone, so the protection has to be the best. If you know of anything lightweight which can still protect similarly (that's why design matters the most) to these cases, you can LMK.
I just want to make sure I get the best thing if I'm paying this much money.
Not important (Just a customer's angry rant) : As Xiaomi already betrayed us by giving too high of a discounts on such a good phone. That's why they're still selling the same stock or IDK what is their plan with this line!!? I didn't returned or went to service centre to complain about the screen bleeding issue. Yes it's still there even after 1 year. So when I buy their phone for Rs. 23K ,8/256 model like 2-3 weeks ago & they give a flat Rs.4k discount on it, It's just straight up back stabbing. I think realistically, so I just knew that they were gonna waste my time at service centre & second it's not that big of a deal. That's why I didn't returned it or wasted my time on repair.
Me as a customer value their product more without any incentive purposes and they as a company doesn't value it. It's just pathetic.
Click to expand...
Click to collapse
Ringke.. I'm using it since day 1 of my Poco F1
I understand your angry customer rant. The discounts on poco are not logical lol. There were many discounts on diwali weekend in India . I snagged 6/64 for $190 / Rs 13,499
nicholes said:
I am planing to get ringke case. I want to know that I am using full screen mode in Poco F1. so how does it goes when we swipe edge for back or when we swipe up for home screen?
I mean does this case create problem or it work well with full screen mode?
Click to expand...
Click to collapse
This maybe a little late butt here we go. The case is expensive but you wouldn't be disappointed. As far as the full screen mode goes I don't think you'd have any problems. In fact one of the reasons I bought it, as you may already know that poco's touch is quite sensitive (seeing a trend in newer phones, xiaomi phones at least) and no settings to decrease it, so to prevent the accidental touches, this a good one, especially when using 'double tap to wake'. At the moment I'm not playing many games on my phone, so IDK how well that would work, but looking at the design it should work pretty well as it makes the phone broader.
This cover is the best for those who want to show off their phones (the back, skin etc.), I mean I bought the armored version so it's not the best in my case, I knew I should've went with the red one. But when it comes to showing off, no cover comes even close, in fact no one's even competing with fusionX. I mean I couldn't find anything even remotely close to it, if someone else know such brand LMK. If you wanna show off your cover, this is not one of them, then you should look somewhere else, unless someone takes a direct look at it when you're taking a phone call or something.
Design wise their goal is simplicity, and they nailed it. Cause it may look awesome in the pictures online but when you put it on your phone, it becomes a part of it. Also they said that the packaging used was recycled so I guess I helped the environment in some way.
The in hand feel is great, you feel all the curves and edges. They go with the same design, I mean if ain't broke don't fix it, amirite? The rubber used around has different finishes like glossy, matte, textured, roughed etc.
Any flaw if you ask me is the front lip to protect screen from touching surfaces. I haven't measured it but I bet it's either 0.75mm or 1mm. As my phone has a tempered glass on it, so one can tell that lip is not that large. I'm not an expert in this like how much is good, but I have a generic rugged cover for my other device and comparing, you can clearly see the difference. Also there was one mistake when it comes to precise cuts. The cut for the secondary mic was quite off, not too off that it's not usable anymore but quite off that you feel a bit mad that, is this seriously a brand product? There could be reasons behind this, design etc. But we can't really accept such mistake, when it comes to a premium product. In this case, for a brand like this, the technique should be flawless when making cuts for the devices. They didn't nailed this one for me, I was disappointed TBH, cause as I said there's no room for - if, but etc. when it comes to something like this.
I was planning to buy these during diwali sale. The ringke one was available for Rs.770 and the spigen one was available for Rs.499. At the time I hadn't decided which one to buy, so I ordered both of them and thought I'd just cancel the other one. But both of the cases were coming from the same place so they packaged both of them together. Just a tip for the future if you're buying from amazon india or apparently from any indian website, cause I doubt there are many distributors for this.
So I had to cancel the order and make another one for just ringke. I didn't went for spigen cause more I read the reviews, the more I came to knew that it just wasn't worth the price. I mean it's just a rubber case, you can get those anywhere in the market and paying that much extra just for the brand didn't made any sense to me even if it would be of "better materials & quality", 499 was still too much for a rubber case with nothing special about it's design and protection.
When it comes to weight, like any other cover it's gonna add some to it, that is inevitable. But when it comes to rugged/hybrid cases, it's quite light, I'm not gonna lie. Cause I have used some generic rugged cases in the past and in comparison this is light. Like the case I have on my other phone, as may know that they're divided into two parts rubber and plastic i.e. hybrid, And I only have the rubber part on me & it still feels heavy compared to ringke. So I guess they nailed in that department as well.
If you're worried about the materials, the whole case is flexible. Both rubber part on the sides and transparent part in the middle. But don't try to separate them cause unlike the normal hybrid cases they're glued together and rightfully so. The way it's designed, they couldn't have made the transparent part detachable. Though if it was detachable, you could've been able to use just the rubber part on the behalf of it looking a bit weird. But if you don't have the money to buy this one, just buy any cheap one after looking at some real pictures posted by users and maybe reading some useful reviews, I think you'd be fine. But if you're going to spend money then better go for the brand and don't look any where else than a Ringke.
The transparent material is a high grade plastic, why? Cause you can't scratch glass with blade, which you can do on this one. But if you're worried about everyday scratches (mostly cause by dust particles, NOT dirt), you won't see any of those here as I said high grade plastic. But don't put this on rough surfaces, cause mostly stones, tiles etc. are harder than plastic. Also you wouldn't have to worry about it breaking as it's not glass.
I don't buy covers so I can keep dropping my phone. Dropping any of your device especially a device you're gonna use day & night, everyday, is just idiotic, people need to get that in their head. The best security for your phone is your hand. I mean just look at it this way, the laptop & pc u use, would you be willing to throw them around? How long would they last like that? I mean it's good to know the durability of something but that doesn't mean you should keep dropping it everywhere if you wanna use it for a long time.
I guess this turned into a review than just a suggestion Hope it was helpful to someone.
ringke case with green camo.
a7cATR4z said:
ringke case with green camo.
Click to expand...
Click to collapse
Nice, coouldn't find that on amazon. Did you bought it from a local store? Is this you https://www.youtube.com/watch?v=PlZRhsfzxqY?
Gurkirat_Singh said:
Nice, coouldn't find that on amazon. Did you bought it from a local store? Is this you https://www.youtube.com/watch?v=PlZRhsfzxqY
Click to expand...
Click to collapse
nope bought the skin from mi.com /mi store app.
ringke case from Amazon it's 899 now I guess.
check description for links.
and yes lol
can't upload video on xda so had to do on yt
Spigen rugged armour ****. Go for ringke.
Go with ringkee
@a7cATR4z Oh!!!!!! you put a skin and case, I thought it was a case design, nvm.
I have used the spigen rugged armour case before. Ended up it so loose terribly after 5 months using it. And also, there was a logo stain on my Poco f1 back which caused by the case. Now that I changed it to Ringke, shall see what will happen after few months.