Database Develop

mtty

Has anyone connected mtty to Diamond - if so a little help wouldn't go a miss

yes I do it daily
what exactly do you need or want to do?

LOL just sent you a PM before I read this
pof said:
yes I do it daily
what exactly do you need or want to do?
Click to expand...
Click to collapse
I used it a couple of times before on my Trinity - I am just doing research and a bit of self tuition
I am in Bootloader and no COM ports will connect to mtty.
Noobie I know but a little help would be great on getting the thing to connect - and yes have searched far and wide but to no avail.
Cheers

On Win XP:
- Activesync USB connection should be disabled (grey icon)
- Obviously, device must be in tri-colored bootloader mode (keep pressed volume down button + softreset with stylus)
- Should work with any mtty version.
On Vista (I haven't tried this myself, i don't have vista):
- Windows Mobile Device Center USB connections should be disabled
- Device must be in tri-colored bootloader mode (see above)
- If you have not installed the older XP usb drivers, you need the vista version of mtty
On Linux:
I yet don't know why the /dev/ttyUSB* device is not created for HTC Diamond, if anyone knows how to connect to Diamond's bootloader on linux let me know!

Thanks - had a version of MTTY with no USB option duh... Now lets start gathering some commands -

I just tried to use mtty but after I press enter, the application hang and then I've got the message Write Operation Failed.
Is there any settings that must be done in mtty ?
I use the vista version.

someone have an idea ?

[email protected] said:
I just tried to use mtty but after I press enter, the application hang and then I've got the message Write Operation Failed.
Is there any settings that must be done in mtty ?
I use the vista version.
Click to expand...
Click to collapse
same problem,need help plz

Kaiser/TyTn II and QPST?

Hello, I'd like to request information on how to use QPST with my Kaiser via USB. QPST shows 'No Phone' on all ports and I don't seem to be able to enter diagnostic mode.
Any advice would be greatly appreciated. Thanks.

i'm running Vista if that makes a difference...

I also have a PC running XP if that helps.
Nobody will help me?

i am trying to do the same thing, i have gone as far as flashing to jockyw's spl with tty enabled. but i dont know how to put it in qpst diag mode... i am using vista, but also tried under xp, with no change.

I'm trying to do the same thing. I can get the comm ports to show up and use QPST while the phone is in the tri-color bootloader state. QXDM will also works in that state but since the phone is not runing, I get no useful information.
I have not been able to get the com ports to show up with the phone is fully booted like I can with CDMA smart phones by dialing ##DIAG#.

you can get qpst to recognize it in tri color mode? the only way i was able was to put it in download mode by issuing rtask a, and radata 90000000 1. after that i installed the motoq drivers available in the frankenkaiser pack. it shows up in qpst as download mode, but it can not mess with anything because it is in dl mode. if you know how to put it in diag mode, that would be a step for me!

I have installed the wmodem drivers and put the phone in bootloader. But qpst sees nothing. Is there a diagnostic mode similar to a CDMA phone.

does anybody know more about qpst?

DIAG mode lg vs910 for QPST

Hi I know there is a differece between downlaod mode and DIAG mode (correct me if im wrong) im trying to activate this phone with pp i already manage to make work talk & text ..to make internet work i need to use QPST and i need DIAG mode to make it work .....if anyone knows how to put this phone on DIAG mode please help ...thanks

anybody please

You can Put in A DIAG mODE ¿
THANKS

[Q] HTC One modem mode

I can bring up the diag menu from entering *#*#3424#*#* but there is no option to put it into diag mode or modem mode from there. you can only run some tests. How to I enter modem mode, or diag mode so that I can get programming apps to find the phone on the 16com port. Supposedly when it is done right the port will say HTC DIAG instead of com16.
Thanks guys :cyclops:

[Q] Nexus 6 - BP Tools & connection to QXDM

Hi,
This is my firt post, so please be forgiving
I have a little problem with bp tools.
I need to connect Nexus 6 to QXDM and to do that I have to turn on bp tools before booting the OS (otherwise QXDM doesn't see Nexus)
But everytime I need to reset the phone remotely, OS is booting without bp tools and I'm loosing connection to QXDM.
Is there any way to permanently turn bp tools on ?

No one can help me ?

Fiszu said:
No one can help me ?
Click to expand...
Click to collapse
I have a question for you, where did you get the bp tools drivers?
I need them to work with qpst let me know