Hello all,
first let me apologize for the long post, and my noobiness. I'm new to the smartphone world, I've sucessfully flashed my Kaiser (from work). Also, I would like to thank everyone who is cooking!
I have the HTC Mteor, which I'm trying to Flash to WM6.1.
When I got it (used), I did a hard reset, and it went back to WM5 in Russian.
I believe I successfully unlocked it, and can now get to the tri-color screen.
It reads:
BBEE100
IPL-0.90
BREE100
SPL-2.05
Every ROM (including the original from HTC) opens, forces the phone to the tri-color screen, and then dies. Error 260, 262, etc.
I've searched the forums, and read that the SPL should be 1.10, but I can't get that to install either.
Any help/suggestions?
Thanks,
Jeff
jjmorris100 said:
Hello all,
first let me apologize for the long post, and my noobiness. I'm new to the smartphone world, I've sucessfully flashed my Kaiser (from work). Also, I would like to thank everyone who is cooking!
I have the HTC Mteor, which I'm trying to Flash to WM6.1.
When I got it (used), I did a hard reset, and it went back to WM5 in Russian.
I believe I successfully unlocked it, and can now get to the tri-color screen.
It reads:
BBEE100
IPL-0.90
BREE100
SPL-2.05
Every ROM (including the original from HTC) opens, forces the phone to the tri-color screen, and then dies. Error 260, 262, etc.
I've searched the forums, and read that the SPL should be 1.10, but I can't get that to install either.
Any help/suggestions?
Thanks,
Jeff
Click to expand...
Click to collapse
install this official rom from HTC
http://rapidshare.com/files/66085556/RUU_BREE100_1.34.261.1_1.38.00.10_HTCRUS_SHIP.exe
Its for RUS QTEK_AO7.
Then you will have SPL 1.10
I have similar problem
I had ROM 6.1 from Futureshock...still problem with radio (my phone couldn´t accessble but signal icon shows good signal, radio version 1.38.0000), so I decided flash some original ROM. Aftet that my booting stuck on HTC logo or Windows Mobile logo. So I can´t use normal way to flashing. Only from SD card or first turn on phone to boot loader mode and than attach usb cable and start flashing. From SD card (where is renamed ROM BREEIMG.NBH) after enter into bootloader mode start loading and than just turn to trhreecolour menu where is BREE100 - IPL-0.90 and BREE100-1.10.0000 and doesn´t want continue. If I flash ROM via USB cable (first go to threecolour mode, than attach cable) than run ROMUpdateUtility.exe and flash process is being started but always die on 2%, than autoreboot and again stuck on HTC logo.
I tried soft reset, I tried lot of ROM versions HTCRUS, HTCEUR, QTEKEUR, FUTURESHOCK but still same problem during flash ROM stop on 2%...
Any ideas how to back life to my MTeoR?
Can I use application like MTTY? Could me help this program?
Thanks for any help...
hi, can any1 send me a link for a ger version of wm6.0pro ?
Wigo said:
I had ROM 6.1 from Futureshock...still problem with radio (my phone couldn´t accessble but signal icon shows good signal, radio version 1.38.0000), so I decided flash some original ROM. Aftet that my booting stuck on HTC logo or Windows Mobile logo. So I can´t use normal way to flashing. Only from SD card or first turn on phone to boot loader mode and than attach usb cable and start flashing. From SD card (where is renamed ROM BREEIMG.NBH) after enter into bootloader mode start loading and than just turn to trhreecolour menu where is BREE100 - IPL-0.90 and BREE100-1.10.0000 and doesn´t want continue. If I flash ROM via USB cable (first go to threecolour mode, than attach cable) than run ROMUpdateUtility.exe and flash process is being started but always die on 2%, than autoreboot and again stuck on HTC logo.
I tried soft reset, I tried lot of ROM versions HTCRUS, HTCEUR, QTEKEUR, FUTURESHOCK but still same problem during flash ROM stop on 2%...
Any ideas how to back life to my MTeoR?
Can I use application like MTTY? Could me help this program?
Thanks for any help...
Click to expand...
Click to collapse
I'm not sure that I understand well, but if you flash from SD, it finish in 100% and than go to three color boot screen? ....
Hi alebo caf Vašek ;-)
My problem is that always stuck on boot image HTC or Windows Mobile blue screen. I can´t use way copy necesseary files to root of phone memmory and than run sspl etc...I have to turn manualy to three-color mode, than connect USB cable and run upgrade utility but still froze instalation on 2%, If I use SD card methode with BREEIMG file uploading doesn´t start....
p.s.: Ak by si mal dáku radu tak možno lepšie vysvetliť po česky ;-). Moje ICQ 208-393-971
Dík
CZ Rom
I would like to install new ROM into my Mteor, but I have no experience doing it. I do not know which version to try, all I need is to be able to enter czech letters on HW keyboard as with original ROM. Any sugestion? I preffer personal answer in czech language ([email protected])
Please help.
I wanted to update my SPL to stock (from HSPL) to be able to install the 1.56 stock ROM. What I did was:
1. downloaded 1.15 stock SPL from HSPL thred
2. Tried to flash it with the HSPL package (as described in HSPL thred)
3. After no sucsess (the RRU told me that there is comucation problem) I restarted the device and the copyed the .nbh with stoch SPL to the SD Card. Then in Boot loader mode flased the SPL.
Now the device boots every time in Boot Loader displaing ROM update Error and then on the white background it shows "Loading.." and nothing hapens!
How to correct it? Please help
put your original rom (the one you had when buyed the phone)............
happened to me this morning ....
after 30 minutes, I managed to turn off my HD, I put back the SD, the previous cooked ROM
I run the bootloader and everything is back ok!
great fear
They changed something in the house HTC
I finaly fixed it! What I did was to remove the SD Card, then Windows XP Found some new devices and the RRU connected to the phone and flashed it! Its a relief!
good man
hello,
i updated my htc diamond to a specific rom.. i have hard spl installed.
the rom worked fine. but when i rebooted it it says unable to boot blabla.. and now if i do a soft reset it only shows the "htc diamond" screen and the red letters. now i go in hard spl menu but i dont have a image in the root so it says "entry USB host" and then it says failed but i got in the usb plugged!!!!
oooo please help me man please!!!!
Thanks
ok
ok i cam restore to manufacturer but do i lose my 4gb internal storage files??
I hope someone can help
Way back when, I debranded my O2 HD7 using this method : http://forum.xda-developers.com/showthread.php?t=988672&highlight=gold+card
Everything has been fine through the NoDo update until this weekend.
The first problems started when I turned the phone on. 50% of the time it would lock at the HD7 boot screen, and vibrate 4 times.
Then it started crashing a lot so I did a hard reset.
Then it failed to boot at all, crashing after the HTC screen.
Then I tried to reflash it, and got a 266 (flash write) error at around 11%.
Now the phone will ONLY boot into the Bootloader. I can't get it to the format SD card screen and I can't flash it with any image.
Thoughts / advice / sympathy welcome
I have the exact same problem...any help would be greatly appreciated...tried search and followed instructions but still stopping at 11% when trying to flash and only boots into bootloader.
Bootloader shows:
PD29110 SS-BC (4k)
SPL-3.1.2250.0(119314)
MicroP(LED) 0x07
Touch S1(v1.8,#1624
SD SANDISK 15193MB
Partition Info-v211v413
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
Click to expand...
Click to collapse
Kh3ldar said:
Thoughts / advice / sympathy welcome
Click to expand...
Click to collapse
edit. just saw you wrote Error 266, not 262. not sure which Error that is...
what does you Bootloader say?
sporty2k said:
I have the exact same problem...any help would be greatly appreciated...tried search and followed instructions but still stopping at 11% when trying to flash and only boots into bootloader.
Click to expand...
Click to collapse
what are you trying to do?
sh4d0w86.
hi guys
i tried to install android on my xperia x1 but some thing went wrong
now when i start my mobile a black screen appear with a blue writing (i think this is fastboot)
I tried to boot a boot.img and now a second black screen with white writing appears (I think this is adb)
when i try to hspl my device (power and volume down) it says (spl 0.72.0000)
I cant go back for a wm rom nor install android rom
I tried many wm rom but nothing is working
i don't know what to do!!!!!!!!!!!!!!!!????
please help guys
I tried to install android following this http://forum.xda-developers.com/showthread.php?t=1329379
first I tried to do hspl 0.78 .... I did it and it was a success
but I couldn't complete everything and android won't run on my mobile
when i power it on a black screen with blue writing appears at first
then i tried to boot an img using fast boot and a new black screen with white writing appears but nothing else
then I give up and I want to get WM back
I tried to go back to the stack spl 0.72 and it was ok but my phone won't run WM it keeps show a black screen with withe writing and stop
when I try to enter boot loader and flash a new rom using sd card (formatting my SD with fat32 and put a rom named kovsimg.nbh on it) it stuck on loading and nothing else
and even when i try to flash a new room using KovskyAdvancedRUU it stop at 0% and won't continue
now i don't have any OS not WM and not Android
I even can't change to hspl like 0.78 or 0.52
thats all I did
I hope you can help me
finally
android worked
when the black screen with white writing appears I connected the phone to the pc and run (adb shell)
and it worked >>>>>>>
thank you very much
but I don't know if I can go back to WM saftly