[Q] rom installation failed - XPERIA X1 Q&A, Help & Troubleshooting

hi guys
i tried to install android on my xperia x1 but some thing went wrong
now when i start my mobile a black screen appear with a blue writing (i think this is fastboot)
I tried to boot a boot.img and now a second black screen with white writing appears (I think this is adb)
when i try to hspl my device (power and volume down) it says (spl 0.72.0000)
I cant go back for a wm rom nor install android rom
I tried many wm rom but nothing is working
i don't know what to do!!!!!!!!!!!!!!!!????
please help guys

I tried to install android following this http://forum.xda-developers.com/showthread.php?t=1329379
first I tried to do hspl 0.78 .... I did it and it was a success
but I couldn't complete everything and android won't run on my mobile
when i power it on a black screen with blue writing appears at first
then i tried to boot an img using fast boot and a new black screen with white writing appears but nothing else
then I give up and I want to get WM back
I tried to go back to the stack spl 0.72 and it was ok but my phone won't run WM it keeps show a black screen with withe writing and stop
when I try to enter boot loader and flash a new rom using sd card (formatting my SD with fat32 and put a rom named kovsimg.nbh on it) it stuck on loading and nothing else
and even when i try to flash a new room using KovskyAdvancedRUU it stop at 0% and won't continue
now i don't have any OS not WM and not Android
I even can't change to hspl like 0.78 or 0.52
thats all I did
I hope you can help me

finally
android worked
when the black screen with white writing appears I connected the phone to the pc and run (adb shell)
and it worked >>>>>>>
thank you very much
but I don't know if I can go back to WM saftly

Related

Flashing ROM and SPL

Hello all,
first let me apologize for the long post, and my noobiness. I'm new to the smartphone world, I've sucessfully flashed my Kaiser (from work). Also, I would like to thank everyone who is cooking!
I have the HTC Mteor, which I'm trying to Flash to WM6.1.
When I got it (used), I did a hard reset, and it went back to WM5 in Russian.
I believe I successfully unlocked it, and can now get to the tri-color screen.
It reads:
BBEE100
IPL-0.90
BREE100
SPL-2.05
Every ROM (including the original from HTC) opens, forces the phone to the tri-color screen, and then dies. Error 260, 262, etc.
I've searched the forums, and read that the SPL should be 1.10, but I can't get that to install either.
Any help/suggestions?
Thanks,
Jeff
jjmorris100 said:
Hello all,
first let me apologize for the long post, and my noobiness. I'm new to the smartphone world, I've sucessfully flashed my Kaiser (from work). Also, I would like to thank everyone who is cooking!
I have the HTC Mteor, which I'm trying to Flash to WM6.1.
When I got it (used), I did a hard reset, and it went back to WM5 in Russian.
I believe I successfully unlocked it, and can now get to the tri-color screen.
It reads:
BBEE100
IPL-0.90
BREE100
SPL-2.05
Every ROM (including the original from HTC) opens, forces the phone to the tri-color screen, and then dies. Error 260, 262, etc.
I've searched the forums, and read that the SPL should be 1.10, but I can't get that to install either.
Any help/suggestions?
Thanks,
Jeff
Click to expand...
Click to collapse
install this official rom from HTC
http://rapidshare.com/files/66085556/RUU_BREE100_1.34.261.1_1.38.00.10_HTCRUS_SHIP.exe
Its for RUS QTEK_AO7.
Then you will have SPL 1.10
I have similar problem
I had ROM 6.1 from Futureshock...still problem with radio (my phone couldn´t accessble but signal icon shows good signal, radio version 1.38.0000), so I decided flash some original ROM. Aftet that my booting stuck on HTC logo or Windows Mobile logo. So I can´t use normal way to flashing. Only from SD card or first turn on phone to boot loader mode and than attach usb cable and start flashing. From SD card (where is renamed ROM BREEIMG.NBH) after enter into bootloader mode start loading and than just turn to trhreecolour menu where is BREE100 - IPL-0.90 and BREE100-1.10.0000 and doesn´t want continue. If I flash ROM via USB cable (first go to threecolour mode, than attach cable) than run ROMUpdateUtility.exe and flash process is being started but always die on 2%, than autoreboot and again stuck on HTC logo.
I tried soft reset, I tried lot of ROM versions HTCRUS, HTCEUR, QTEKEUR, FUTURESHOCK but still same problem during flash ROM stop on 2%...
Any ideas how to back life to my MTeoR?
Can I use application like MTTY? Could me help this program?
Thanks for any help...
hi, can any1 send me a link for a ger version of wm6.0pro ?
Wigo said:
I had ROM 6.1 from Futureshock...still problem with radio (my phone couldn´t accessble but signal icon shows good signal, radio version 1.38.0000), so I decided flash some original ROM. Aftet that my booting stuck on HTC logo or Windows Mobile logo. So I can´t use normal way to flashing. Only from SD card or first turn on phone to boot loader mode and than attach usb cable and start flashing. From SD card (where is renamed ROM BREEIMG.NBH) after enter into bootloader mode start loading and than just turn to trhreecolour menu where is BREE100 - IPL-0.90 and BREE100-1.10.0000 and doesn´t want continue. If I flash ROM via USB cable (first go to threecolour mode, than attach cable) than run ROMUpdateUtility.exe and flash process is being started but always die on 2%, than autoreboot and again stuck on HTC logo.
I tried soft reset, I tried lot of ROM versions HTCRUS, HTCEUR, QTEKEUR, FUTURESHOCK but still same problem during flash ROM stop on 2%...
Any ideas how to back life to my MTeoR?
Can I use application like MTTY? Could me help this program?
Thanks for any help...
Click to expand...
Click to collapse
I'm not sure that I understand well, but if you flash from SD, it finish in 100% and than go to three color boot screen? ....
Hi alebo caf Vašek ;-)
My problem is that always stuck on boot image HTC or Windows Mobile blue screen. I can´t use way copy necesseary files to root of phone memmory and than run sspl etc...I have to turn manualy to three-color mode, than connect USB cable and run upgrade utility but still froze instalation on 2%, If I use SD card methode with BREEIMG file uploading doesn´t start....
p.s.: Ak by si mal dáku radu tak možno lepšie vysvetliť po česky ;-). Moje ICQ 208-393-971
Dík
CZ Rom
I would like to install new ROM into my Mteor, but I have no experience doing it. I do not know which version to try, all I need is to be able to enter czech letters on HW keyboard as with original ROM. Any sugestion? I preffer personal answer in czech language ([email protected])

wm 6.5 will not finish boot up

I have upgraded my phone to wm 6.5, the phone used to finish boot up completely. Now all it does is go to the green windows screen and then go dark. I have tried a hard reset and I would like to flash another rom into it but my computer will not see the phone in this state.
maybe you just have to wait, it takes a while to complete first boot..
I know the first boot can take awhile, but I am pretty sure 2 weeks is to long LOL
does anyone have an idea how to unbrick the phone
try to install a new rom
first try with 6.1 normal version , and if it does not help , try to install 6.0

help needed please with possible brick fixed:D

hello all
yesterday i wanted to flash a friend tp2
when i flashed it it went to 100% and then it gave a rom code error
i restarted the phone in bootloader to flash a other rom and it wanted to read the image on the sdcard
wich resulted in red serie of digits on top of the screen 00058002
and the phone turned off
i deleted the image from the sdcard and tried it again
i came in bootloader and i saw threu the spl text rom upgrade error
now everytime i enter bootloader it turns off the phone in 5 sec
i managed to run a task 29 one time by resetting the phone multiple times
can some one help me
owww its not fixed
i managed to get stock rom on it again but during the custimizsation the phone turned off:S
and now i have the same problem again
edit: i dont know how but its fixed

Stuck in Bootloader screen

Hello all,
as the title says, one of my touch diamond's is stuck in bootloader screen.
I didnt do anything in between it working and not working, it was on my desk, put it there working, got it 5mins later, and it was in bootloader screen (tricolor screen).
What i've already done to try and fix it:
flash it with the original HTC rom, flash completes succesfully, phone reboots to tricolor screen, so no solution there.
install mtty and format the phone, this completes, reboot the phone, again goes to the bootloader.
reflash the phone with original rom after cleaning it with mtty, flash again completes succesfully but when it reboots after flashing it just goes to bootloader again.
Tried to flash a Hardspl: stuck at 0% and stays there. so that doesnt work.
BUT! when in mtty i give the "boot" command, it DOES start to boot WM. but then again, when i turn the phone of, and on again, or it reboots because of first start after flash, it goes to bootloader again. The VOLDOWN button is NOT stuck, cause when it boots i can use the vol buttons perfectly fine.
Anyone got an suggestion in how to unbrick it? i have a second, perfectly working diamond here too, if that helps in any way.
Some more info ive just seen in mtty, when i told it to boot, it said ONE BAD BLOCK IN CE, remove block ---- to ---- (dont know the exact numbers anymore)
hi..i had something like that...
just download this.
"RUU_Signed_1_93OliNex_HSPL_UnsignedEdition"
it's only 1.7MB and it's will make it work.. atleast it did the job for me...
Hi,
My T mobile touch diamond stuck in bootloader screen? Any experties to help me please.
Thanks in advance.

Help!!! No OS is installed (FASTBOOT)

Hi,
I've got a bit of a problem here I've wiped my phone to install a new ROM (The recovery failed to install it ¯\_(ツ)_/¯ ) and now I went to fast boot and I have NO OS system on my phone I've used stock zip for the recovery but it will say it has been installed and when i boot it nothing happens it will show the HTC logo and then will turn off and when i go to check the fast boot it will show the OS but nothing next to it I've been trying all day and nothing has worked and the last thing I don't want to do is send it in for repair again....If there is anyone out on the forums who had this problem and fixed this I will be really grateful..
Thanks

Categories

Resources