Question about my hero (Water dmg?) - Hero CDMA Q&A, Help & Troubleshooting

So yesterday at work I was on the pooper and somehow managed to drop my phone right between my legs... not sure how.
Anyway, I pulled it out of the water almost instantly... damage is already done. Took the battery out and put the phone under a fan. I get home and I submerged it under rice.
This morning I turn it on - everything works. I'm so excited... Nexus One bootscreen.... bam, my rooted baby. Uh oh.. wtf... yeah, the touchscreen doesn't work. . I keep getting android process is not responding blah blah
My question is, is it worth it to try to maybe reflash to another rom to see if I can get the touchscreen working? Or should I Just buy a new one off ebay?

so sad...so gross...
Theres probably corrosion on the connector for the touchscreen to the "main board" (only board) if not in other places.
Disassembly is not that difficult (have to be slightly "handy") and you might be able to clean crud off the connections/legs of ic's.
Ideally for this job you would want a microscope (magnification of some sort), dental picks, alcohol, qtips, compressed air, and deoxit (and of course the torx driver)
Disassembly instructions:
http://androidforums.com/sprint-htc-hero/22036-sprint-htc-hero-disassembly-diy.html
If not too much water has gotten in you should be able to clean it. There is a chance you have corroded off traces on the board, or shorted some components...then youre kinda screwed (unless you know how to fix such things which im guessing you dont or you wouldnt be writing here).
But then you end up with a phone that you put near your mouth that you have no doubt "did a number on" which for me would be a little too gross to handle.

to answer your question...
flash a rom.. only takes a few minutes. Why not? you can not make it any worse!!!!! gross!!!!
and.. try to take it apart and see if you can clean it up some more...follow the posters above's advise.

nope its done for. i give it a week. your running electric current through it while there is still h2o on the contacts. that will speed up corrosion by 300% or something. you should have left it off for 1- 2 weeks for EVERYTHING to dry up. now its just a matter of time. enjoy it.

Avalaunchmods said:
nope its done for. i give it a week. your running electric current through it while there is still h2o on the contacts. that will speed up corrosion by 300% or something. you should have left it off for 1- 2 weeks for EVERYTHING to dry up. now its just a matter of time. enjoy it.
Click to expand...
Click to collapse
You're assuming it has been on.
I haven't even turned it on yet with the exception of 3 tests. I completely disassembled the phone today thanks to a youtube video. I cleaned every black circuit I could find... I pretty much cleaned everything. Yes, I found 3 pretty badly "burned" circuits... cleaned them all off. Turned the phone on as a test, and bam - everything worked, touch screen and all ... without flashing a rom.
Now the phone is sitting in about 4 pieces sitting under a fan.. and will stay there for a few days. The front piece + screen, the circuit board, the rear panel and the battery cover.
Thanks for your input, if it wouldn't have been for you I would immediately be using it. You could try to cheer up a bit, though.
--
edit
--
P.S - the phone didn't even have a trace of condensation on it. I'm not sure what else could be wet, but I will surely let it fully dry.

Buy a new one off ebay!! Man... everybody ain't able!! Wish I was ballin like you. lol

MrDanger said:
Buy a new one off ebay!! Man... everybody ain't able!! Wish I was ballin like you. lol
Click to expand...
Click to collapse
Trust me when I tell you I'm not ballin'. I'm your average 30k joe who wishes he went to school.. I'm young enough to go, but can't afford it. The state gives me little to nothing.. and loaning through freddie/mac isn't worth it because your origination fees are more than your tuition for your first year in school.
I just have to have a phone - I live on my own, I don't have parents within 200 miles of me.. I have my boys, and my fiance - that's about it. Hell, I'm STILL paying for that ring.

Battery
Just for your information the battery has the same water sensor that the phone, happens. It could fool a Sprint rep if you preform wisely.

Nice job!
You really want to make sure you (VERY CAREFULLY) scrape off any rust or corrosion then apply something to stop the corrosion from occurring again (deoxit). Dental pick is best, exacto maybe (both used with a very light touch if youre not used to doing this). Dont slice any traces or wiring !! Dont get too aggressive, just get the big stuff off.
ALSO! Clean out your USB post and headphone jacks if they were submerged...same thing-rust (and poop)
Cheer it up a bit? Arent you happy you fixed your phone yourself? You're welcome!

agentofboom said:
Nice job!
You really want to make sure you (VERY CAREFULLY) scrape off any rust or corrosion then apply something to stop the corrosion from occurring again (deoxit). Dental pick is best, exacto maybe (both used with a very light touch if youre not used to doing this). Dont slice any traces or wiring !! Dont get too aggressive, just get the big stuff off.
ALSO! Clean out your USB post and headphone jacks if they were submerged...same thing-rust (and poop)
Cheer it up a bit? Arent you happy you fixed your phone yourself? You're welcome!
Click to expand...
Click to collapse
I definitely am happy! Thanks to you guys I did fix my phone - saved my $230. Thanks to the guy with the disassembly thread, too!
The person I was tellnig to cheer up was the guy who said it was fried - t minus 1 week or something.

Related

anyone want a phone?

I've really appreciated all the help I've gotten from this site. Unfortunately, I dropped my ATT Tilt into my kitchen sink full of water. That was a couple of weeks ago. Now it doesn't work. It won't turn on, and when I plug it in, it only shows a red light instead of an amber light. I know alot of you are messing around constantly with these phones. I don't know if this phone is worth anything, but if somebody wants a project, you're welcome to it. I have no idea if the phone is even worth the trouble. I also have a USB cradle as well as a wall charger that I'll throw in. Feel free to email me direct if you are interested.
Eric Kurth
[email protected]
pull the back cover & battery. Lower left side, just to the right of the lower left copper colored contact is a small white square. If it is still white, try this to get
rid of the red LED when you turn it on. take the battery out and rapidly push it against the 4 battery contacts multiple times. Then, put the battery back
in, connect the charger and see if the red LED goes away and the amber charge light comes back on. If it does, try powering it back on and see if it comes back to life.
Might be worth a try.
Re
Lol, you've definitly got a good mood. I think lots of people are intrested in the device. So you should donate him to the driver project people i guess....
But first i would try the things mentioned above here, also try to power on without battery as well, remove the battery for some time etc. etc....
Maybe you can get it back to work...!
At least i think donating is a good idea, I'm having one already so maybe you make another person happy!
cheers!
I would love to have it.
what's the contact infor for the driver project people?
tried that.....didn't work.....and the little white square is red......guess i shouldn't have had that last glass of wine....lol
take the thing appart and blowdry it. When I say take it appart I mean way appart. there should be just 4 skrews. you can get the screwdriver at radioshack. One of the screws is covered by a void sticker.
when you take it appart inspect the board to see if there are any burn marks or "bisters" . if that is the case, it might be worth parts or something. I think that the camera is more than 1.3mpx and it might be interchangable with the older models of HTC phones (provided someone loads the drivers)
Belive it or not it's not as easy to kill a phone just by dropping it into water.
By the way, WD40 is a water reppelant originaly designed by or for the military to help deal with the wet electronics issues. it does not cunduct electricity. so if you need to "clean" the greesy **** that was in your sink, you can use that.
The other thing you can do is replace the red sticker with a white one and send it in for repair. I would try blowdrying it first.
I had a phone I dropped into a glass of beer once. within 3 days it worked (after it dried fully) don't try to turn your phone on while it is wet. useless and you can burn something out.
I might be tossing my Tilt to eBay soon. I figure its easier to just get a real TomTom for my GPS and use my iphone which I just updated the firmware last night to the latest 1.1.3 AND jailbroke it. It's just a nice device to use, and I've been using both, so I can say that based on hands-on, NOT opinion.
how much you want for it? I want it if it is reasonable.
shipping plus ten bucks for the trouble.....you get the DOA Tilt, wall charger, and USB cradle.
Deal
PM Me your Paypal.
Check your PM
Hey, if you still have it check your PM.
Sold Sold Sold
Jeez.....i had no idea there would be such an interest. i probably should have just put it up for auction. Anyway, the phone is sold. No more emails please....lol.....if anyone wants to make alot of freinds just advertise that you want to get rid of a broken phone. Too funny.
Thank you to the guy who bought it....and good luck with it.
glad to see you got something out if it
S.V.I said:
...within 3 days it worked (after it dried fully) don't try to turn your phone on while it is wet. useless and you can burn something out.
Click to expand...
Click to collapse
just FYI, you can't burn anything if it is wet. water is not conductive for DC. only AC. otherwise your car would be toast everytime it rains

Water Damaged Diamond... what next?

Hello all, while drunk at the beach this weekend I accidentally went into the water with my Touch Diamond in my pocket... stupid... I know, did I mention I was drunk? Anyways, the current issue at hand is what to do with my screwed up cell phone.
I took the backing, battery and SIM card out of the phone and let it dry out as much as I could since the weekend. When I turned it on this morning, the "smart mobility" text appears for a few seconds, but the phone shuts off shortly after that. Do batteries usually break from water damage, as well?
If anyone has any advice for me I would greatly appreciate it. Does anyone know of a legit place that can repair this? Is there anything I can do to try and remedy this problem? Or would you recommend I just sell/ditch this one and get a new phone? Thanks a lot.
Have you tried charging the battery? that might explain it only booting for a second, the other explanation is that it's fried the ROM chips and only the bootloader works.
It's not looking good, is it under warranty?
Disassemble your Diamond completely (manual floating around somewhere in this forum), clean all pieces using one of these isopropanol-brush-thingies, reassemble, turn it on - and pray. Any year - a new battery might be a good idea. No promises on anything of that though. The diamond is a very integrated piece of technology and you might have short-circuited something on one of the PCBs really. No guarantee that everything will work as usual even if the device comes up as well.
Warranty seems to be out of the question - I guess virtually any repair center will notice residue of loads of salt water on the first look inside...
That's true, I meant to say insurance, heh.
Strip it down Salt water is very and I mean very corrosive ! You have nothing to lose and everything to gain by doing this . Waranty repair will be expensive.
Clean with an alchol based cleaner as advised but you must ensure you get all the salt out. To see it boot means that the screen has survived ( Amazed by this ) .
Best of luck , oh and if it does not work are you insured for accidental damage on personal items on your household insurance. This could be the next route
I have the same problem with my Tytn 2. It got wet during the "Oranje" Party in Basel, when the firemen were "cooling" down the fans...
It boots..but as soon as it has booted, you here a lot of "bling..bling..bling.." and it shuts down.. the batterie doesn't charge..
You recommend to open and clean it with alcool? Actually I'm not sure if it was washed by the firemen or by my own alcool .ehhehe..
I have a Diamond now, but if I get it back to work, I would sell it on ebay.
Regards
dajudge01 said:
Warranty seems to be out of the question - I guess virtually any repair center will notice residue of loads of salt water on the first look inside...
Click to expand...
Click to collapse
There is a watersensor inside the diamond. They'll notice that the device has been in the water.
wardy said:
Strip it down Salt water is very and I mean very corrosive ! You have nothing to lose and everything to gain by doing this . Waranty repair will be expensive.
Clean with an alchol based cleaner as advised but you must ensure you get all the salt out. To see it boot means that the screen has survived ( Amazed by this ) .
Best of luck , oh and if it does not work are you insured for accidental damage on personal items on your household insurance. This could be the next route
Click to expand...
Click to collapse
Luckily I was at lake Michigan in Chicago (fresh water), for whatever that's worth, so I'm not really worried about salt corroding anything away. I bought it off eBay unlocked, I did buy insurance but, naturally, I'm pretty sure that this water damage won't be covered.
Sounds like taking it apart and cleaning it might be my best bet. Do you guys think that any cell phone repair place would be able to help me out? Anyone know of a good cell phone repair shop (in the U.S.)? Thanks for the help thus far guys, I really appreciate it
Firstly remove the battery and SIM, please do not try to power up or charge again as you might have already damaged it beyond repair.
Isopropanol or IPA is what you need (100% Alcohol), you can get this from your local chemist for about £5 a bottle.
You need to strip your phone down completely and use an anti static PCB brush to clean the whole lot (Buy it from Maplin), submerge it in a plate of IPA (excluding the screen) while cleaning. As for the warranty sticker remove this by first heating with a hair drier, then uing a Stanley knife point to remove it.
Once it’s all been cleaned and dried in air, re-assemble and power up. If it fails to work take it back for a warranty replacement. As the warranty sticker is intact, and all the evidence of water damage will have been removed, they should replace it for you without a problem.
nairb011 said:
Luckily I was at lake Michigan in Chicago (fresh water), for whatever that's worth, so I'm not really worried about salt corroding anything away. I bought it off eBay unlocked, I did buy insurance but, naturally, I'm pretty sure that this water damage won't be covered.
Sounds like taking it apart and cleaning it might be my best bet. Do you guys think that any cell phone repair place would be able to help me out? Anyone know of a good cell phone repair shop (in the U.S.)? Thanks for the help thus far guys, I really appreciate it
Click to expand...
Click to collapse
Pretty sure? I would check if I was you before doing anything else with it. If insurance doesnt cover water damage, what does it cover? Phone insurance is so expensive i thought they covered everything like theft and accidental damage, I thought the idea was a warranty wont cover you if you break the phone but insurance will.
I'm thinking it may be an idea to check before you do anything else so they dont say "Well we cover water damage, but now youve taken apart the phone we cant cover you"
Antimus said:
Have you tried charging the battery? that might explain it only booting for a second, the other explanation is that it's fried the ROM chips and only the bootloader works.
It's not looking good, is it under warranty?
Click to expand...
Click to collapse
Seriously you are not hoping warranty will cover "swimming with the diamond"...
imranbashir_uk said:
all the evidence of water damage will have been removed, they should replace it for you without a problem.
Click to expand...
Click to collapse
All the evidence, that is, apart from the water-sensitive tab which I am assuming you didn't know about...? (behind the tab for attaching a strap)
Mathew
webmice said:
Seriously you are not hoping warranty will cover "swimming with the diamond"...
Click to expand...
Click to collapse
or doese he mean "Swimming Diamond" ... Is that a new feature we overlocked? I think it's time for another entry in the tweaklist... *rofl*
My warranty does not cover accidental water damage, that is for sure.
I charged the battery up over the weekend and tried turning it back on, and, to my utter amazement, the phone completely powered on. I got to all of my menus and was able to use all of the programs that I opened, even the WiFi worked.
However, the functionality of the touch screen is quite screwed up. I don't know if its shorting out or what but there are basically "ghost taps" and other unintentional actions happening all the time. For example, if I were to just leave it at the home screen it would eventually scroll to another menu, open the start pull-down menu, automatically open the calendar and start doing random ****, etc.
Does anyone know how to fix the touch screen or have any ideas on how to replace one? I have a faint hope that this thing might not be beyond saving.. thanks a lot people
nairb011 said:
Does anyone know how to fix the touch screen or have any ideas on how to replace one? I have a faint hope that this thing might not be beyond saving.. thanks a lot people
Click to expand...
Click to collapse
Maybe try to re-calibrate the touch screen?
Don't give up hope, sometimes these things can take days, even weeks to fully dry and become functional. My mom had a sony ericsson somethingorother that she loved, dropped in the tub, didn't work for like a month or more... She'd check it every week or so to see, and slowly the features started coming back... Little by little, more and more buttons would respond (without activating 2 or 3 at a time). Well, long story short (too late?) works 100% now. I don't think water damage is a reparable occurrence, but DON'T sell your Diamond for parts or anything like that, keep it around and check back periodically. Best of luck.
there is a little white sticker onto the battery.
If it goes RED it shows HTC that the Phone/Battery went into the water.
This allows HTC to avoid repair "sunk" phones
deuillevent said:
there is a little white sticker onto the battery.
If it goes RED it shows HTC that the Phone/Battery went into the water.
This allows HTC to avoid repair "sunk" phones
Click to expand...
Click to collapse
Should also be one on the phone... If not, there's your solution. New battery + deny any water damage = Free replacement.
Black93300ZX said:
Should also be one on the phone... If not, there's your solution. New battery + deny any water damage = Free replacement.
Click to expand...
Click to collapse
See post #12
Haha you're all over it... Yeah, I had a feeling they'd have something in the phone, they'd never make it THAT easy.

My phone swam, AND LIVED.

Alright so, long story short. I went to go jetskiing today, on the Potomac River, and well, I thought I had taken my phone out of my pocket before helping my friend take off the jetskis off the tralior into the water, I waded out and felt my pocket get really heavy, and just so happened my phone was in my pocket. I freaked out and popped out the battery. ( i think thats what saved it. ) but so i just left it in the car, so it had time to dry. Came back about 4 hours later, and went home and put it in a bag of rice, I turned it on though, spiting I wanted to know if it worked. Phone worked, but only out the back speaker and volume was muffed and really low. Touch screen worked perfect! but none of the hard keys worked. I was pretty upset so I put it back in rice and popped off the back speaker cover and prayed that it would work. Just a bit ago, popped on the back cover and turned it on. EVERYTHING WORKS! I was so shocked, at first it was being tempermental. But a few soft resets and BAM worked like a charm
my little rant about how my phone survived a little swim with the fishes.
mods, please move if its not in the right area. thanks
Swimming - Phone
Hey,
It is a great thing that you had just added the "Bubble Cab"®.
The only authorized and working application that saves your device from
drowning. (as it surrounds all of the small and electrical connections, soldering points, and internal parts, and completely squeezes all impact of water and moisture from your baby (the phone).When _any_ water or fluid contact happens or occurs !
Also as a further precaution the rice trick*© probably did not hurt !
--- All jokin' aside ! Still kinda laffin' .....
I was really happy to see your phone didn't drown ! (VERY Sincerely)
Your quick thinking to take it apart (the battery, and all) and allow it just to dry. Probably did the trick.
Anyway was very happy to see your AOK !
And another little known fact the Bubble Cab® will in fact ! Resuscitate a drowned phone !
And can be purchased via tru Mr. Mbudden, his Program is currently out of Beta !
And Full Product BubbleCab 1.01 ® is a steal ! at $16.95 !
Thanks
david !
Bubble Cab®
Hey !
Also, let me know when the Beta is finished on :
Bubble Cab® ² ... Diver Edition®
For Deep water/ Long Trips Scuba Edition®
Can't Wait ! for this
take care ..
david
All information is Property of Bubble Cab™ and its owners.
The Kaiser will, of course, complement any diving watch!!!
I had an 8525 which fell in the Atlantic and pretty much the exact same story. Pop battery out and rice it I learned a valuable lesson. Dont drink and fish in Ocean City...... lol
Patomic huh? I bet we have seen each other out on the water at some point ( although most of my boating now occurs on the Magothy and out near the Bay bridge these days lol )
Glad to hear your phone is well!!!
pyraxiate said:
I had an 8525 which fell in the Atlantic and pretty much the exact same story. Pop battery out and rice it I learned a valuable lesson. Dont drink and fish in Ocean City...... lol
Patomic huh? I bet we have seen each other out on the water at some point ( although most of my boating now occurs on the Magothy and out near the Bay bridge these days lol )
Glad to hear your phone is well!!!
Click to expand...
Click to collapse
Um... Fell in the ocean and you just dried it, you didn't flush it out? Mmmmm, corrosion. How long ago was this?
To the OP (and everyone), I would suggest you not use the phone unless it's been drying with rice (or, get dessicant) for several DAYS. I think you got lucky it still worked after such a short drying period.
I think the phone would have recovered faster had you dropped it in the toilet right after Kumar visited White Castle. Potomac river water can make you lose your hearing! That water is nasty!
khaytsus said:
Um... Fell in the ocean and you just dried it, you didn't flush it out? Mmmmm, corrosion. How long ago was this?
To the OP (and everyone), I would suggest you not use the phone unless it's been drying with rice (or, get dessicant) for several DAYS. I think you got lucky it still worked after such a short drying period.
Click to expand...
Click to collapse
This was well over 4 months ago. As far as I can tell it is still working as it should ( I havent used it in a while but I just juiced it up, put my sim in it , powered it on, and tested with a call )
I probably should take it apart again and clean it, but im not too worried about it.
I do have 2 tilts now afterall...... the 8525 was just around as my backup until i got my second one lol
telegraph0000 said:
I think the phone would have recovered faster had you dropped it in the toilet right after Kumar visited White Castle. Potomac river water can make you lose your hearing! That water is nasty!
Click to expand...
Click to collapse
I agree......... dont eat any fish you catch........ they are more than likely contaminated
Wow I didnt realize so many people from the east coast are here

[28-5-2009] Xperia fell, into toilet!!

OMG, this was the first thing i said.
suddenly my X1 fell into the toilet straight into the pipes!
but before it goes into the water, a good thing happend! the battery popped out . this might be a good sign
lucky me, i recovered my phone, but will it work?
i don't know, it's out of warranty anyway so let's open it, clean it and see what's inside.
steps done so far (started @ 10:00 am GMT+3)
1) washed the phone, with every single cleaning liquid i ever found
2) started opening the phone and cleaning it from the inside (yes, puring it with water and some cleaning/anti germs stuff) and yes including the bords.
3) finished cleaning it from the inside, now drying part (current status)
4) dryubg is over, connected everything together (without the body of the device, only boards) and YEPPPPPPPPPIIIIIIIIIIIIIIIIIIIIIII, it's working.
a) Touch screen is fine, LCD have some problem (seems it still have some water in) i will dissamble the LCD completely.
b) no other problems to the main hardware (as PDA, i didn't test the speaker or anything else!)
5) OS Is not booting now, LCD is missing the RED Color, getting stucked on the SE Logo!
6) got really tired, i think this will need time, went to the shop, bought an HTC Touch HD
7) i will continue working on X1 untill it's fixed.
i will update this as i progress.
wish me luck
[12-5-2009]
Finally got some time to check why the phone is stucked SE Logo.
- first tried a hard reset
it didn't solve it, i thought maybe flashing a new ROM will help.
- Flashed a new ROM (HSPL already there before),
Still the same issue, the LCD is missing the Blue Color Sometimes, its a carbon connector for sure and can be fixed, but why not booting?!
[28-5-2009]
- got more time to work on it
- flashed nX1i_v1_04_WWE, still, stuck on se logo!
- Check attached Images
Edit : i replaced the LCD, the phone is booting now but it's taking around 4 to 5 minutes to boot, it get's stucked at the SE logo then it continues.
i'm able to flash new ROMs.
BT and Wifi are not working.
BT is turining on and off but i cannot use it, my X1 cannot be found using any other BT device when it's on visible mode. and cannot send files from my X1!
Wifi : Not turining on at all!
anyone with ideas? i really suspect the flexcable due to any accedental push i made when opening the device but it's expensive to replace and honestly, a new X1 would cost a bit higher!
dang thats unlucky - as long as the battery fell out it wouldnt have short circuited anything then i guess - just dont turn it on till its SUPER dry
comeradealexi said:
dang thats unlucky - as long as the battery fell out it wouldnt have short circuited anything then i guess - just dont turn it on till its SUPER dry
Click to expand...
Click to collapse
do you think it's possible to use the elictric hands dryer? or it will do some problems?
don't think a hairdryer should cause problems
about warranty then think all phones today have
indicators which show if they have been wet because
dropping it in water is not covered
surprisingly many people seem to drop phones in toilet
read it was the most common way for them to die
Are you shure that you aren't just in a bad nightmare?
My aunt throw already three mobiles into toilets, don't ask my why
Everything I can say is, that none of the phones could be reanimated
I have too admit my Xperia fell in once, after a few days all was okay, exept dpad wasnt functioning, and i couldnt hard reset or enter bootloader ( weird problem ) with the keys. Ended up replacing it, and forget asap.
Hey,
sh*t happens. Anyway. Here is a link with a thread called: my phone got wet - what should I do!
Even I never had such an accident before I found the solutions quite useful.
Have a look:
http://forum.xda-developers.com/showthread.php?t=448106
Greets
I haven't read that thread posted above yet, but never use a hairdryer/hand dryer. The can be quite hot coming out of the nozzle, if you're not careful you can melt plastic with them (I work in a helpdesk, I've seen laptops come in after a tiny spillage but with melted keyboards after being attacked by a hairdryer).
Best bet is to take all the covers you can off, dry with a towel/kitchen paper (toilet paper breaks up and leaves lots of little bits) and leave to dry *slowly* resting on a towel, folded several times over, on top of a radiator. Leave it there for 24 hours, more if it looks like there's still water in there.
I'd expect to see tide marks on the screen afterwards though, especially if you live in a hard water area. If you live in a soft water area you might be luckier and have very little residue.
Maybe u should let the x1 go where all the good phones go, phone heaven.
bit of advice dont answer your phone as u take a leak, friend done that in a nightclub and then had to reach in and get it out. even my beloved x1 would have stayed there (take it as a lose lol).
ps. i hope u get it working bud
I read in an iphone forum that you should bury the phone in rice since the rice absorbs all the moisture.
rogatsby said:
I read in an iphone forum that you should bury the phone in rice since the rice absorbs all the moisture.
Click to expand...
Click to collapse
But don't eat the rice afterwards, its been in the toilet!
Go and buy some Isopropanol, now open your phone and disassemble everything.
Fill some Isopropanol in an cup or something an lie the board inside. (IMPORTANT: The microphone and speaker and camera shouldn't get wet so get it off the board or if you can't you must seal them)
Now let the board lie in the cup for 1 night or so. the isopropanol should evaporate. the clue ist that the isoprop. is binding the water and the salts etc. in it and evaporates with them.
With this method i rescued several phone which was gone swimming
Sorry for my bad english
Bin4ry
Bin4ry said:
Go and buy some Isopropanol, now open your phone and disassemble everything.
Fill some Isopropanol in an cup or something an lie the board inside. (IMPORTANT: The microphone and speaker and camera shouldn't get wet so get it off the board or if you can't you must seal them)
Now let the board lie in the cup for 1 night or so. the isopropanol should evaporate. the clue ist that the isoprop. is binding the water and the salts etc. in it and evaporates with them.
With this method i rescued several phone which was gone swimming
Sorry for my bad english
Bin4ry
Click to expand...
Click to collapse
yeh that's not a bad idea, but alas it didn't work for my old ipod when it fell into the canal.
to the OP you have my sympathy, my x1 was grabbed by my toddler son this morning. I caught him just as he was opening the bathroom door.
fards said:
yeh that's not a bad idea, but alas it didn't work for my old ipod when it fell into the canal.
to the OP you have my sympathy, my x1 was grabbed by my toddler son this morning. I caught him just as he was opening the bathroom door.
Click to expand...
Click to collapse
Mine went flying the other day, got my gf's nephew to take a photo, he came running over to show the picture, my x1 went flying luckily no cracks or marks, it almost went into a waterfall
I also had this problem on my old nokia 6600 the phone did ring when i was taken a leak and it feel down to the toilete but i was quick to take it up..throw off the battery and open it to dry it i used compressor on it to dry it then let it rest in the sun for 4 days and it worked fine and still those as i have it as a reserve phone atleast that survived...but my nokia n95 was not that lucky o was stupid enough to answer a messages right before i was at sea to take a bath and i putted it back in my pocket that was my bath shorts and did take the bath gladely i was quick up of the bath and first thing i did was take of the battery opened it dry it let it rest in sun for some days..it started and worked for 3 months then i died:/
Hahhahaah ....in the toilet.....AHAHAHAHAHAHAHAHA
Sorry about that dude , but i had to do it.
The taking apart and using hairdryer ahs worked for me in the past, but be careful not to overheat it.
orelsi said:
Hahhahaah ....in the toilet.....AHAHAHAHAHAHAHAHA
Sorry about that dude , but i had to do it.
The taking apart and using hairdryer ahs worked for me in the past, but be careful not to overheat it.
Click to expand...
Click to collapse
me my self was laughing harder when they were extracting it
UPDATED FIRST POST, GOT HTC HD and will conitnue repairing my X1
anaadoul said:
me my self was laughing harder when they were extracting it
UPDATED FIRST POST, GOT HTC HD and will conitnue repairing my X1
Click to expand...
Click to collapse
At first I as gonna reply with laughing my a$$ off but then on second though I was like "your $ just fell down the toilet" dang...
Kids...be sympathetic...
Anyway, also happened to me a while back, but with a PDA.
I dismantled it, washed it part by part and it worked like a charm after that.
The only thing was, the LCD was permanently stained or smth. One of the light diffusers into the lcd (which was paper btw) was damaged by the water.
But it was functional and I could still use it ok...until I fell on it...
And this happened (check attached file - if you look closely you can see the right part of the LCD is kinda missing)
I'm pretty curious to see your display after you manage to get it working...
Can you get some pics online?
I once accidentally dropped a Sony Ericsson device in a large glass of water - it completely recovered. Hope you have the same luck

Raider digitizer glass shattered, anyone know the proper way to install a new one?

Yes, I already broke my phone. Go ahead, grin and chuckle..now that you've gotten it out of your system, anyone want to offer a little guidance? Never disassembled a newer cellphone before. New glass is ordered and has been shipped, just waiting for it to arrive. I'm hoping the process is fairly simple. I do have a specialized set of screwdrivers with all the hard-to-find bits, so that's not a problem ..it even has the tiny blackberry bit.. but from what I can see HTC uses standard micro Philips screws. Yay for standard formats!
Sent from my HTC PH39100 using xda premium
If this phone is anything like hd2 you're gunna want the flat pry tools they sell (search hd2 screen replacement tools). Their not needed but a nice handy thingy to have, other wise you might crack your LCD from flexing it too much.
Sent from my HTC PH39100 using XDA App
I wont grin and chuckle too much, I broke my Atrix after 4 days.
The Vivid screen seems very fragile. 2 of my coworkers have broken theirs within a few weeks of having them. Small drops from waist distance. Its too bad because I have seen the current Samsung models dropped from 6 feet face first and survive
Sent from my HTC PH39100 using xda premium
Yeah, I've cracked mine as well. If you google HTC raider teardown on YouTube.. There's a vid.... Butttt, it's not in English and it's a teardown not a screen replacement tutorial.
It seems as thought HTC has been using reeeeally thin glass in their devices.
Whered you get the glass? It'd be very thoughtful of you to do a tutorial as you do it. I really want to replacement mine but if you remove one on the screws by the battery it voids your warranty
Send it to HTC then? You get a 1 year warranty when you buy the phone.
Honestly, I think Corning had another incident of releasing faulty glass. I've dropped mine numerous times, from pretty high up and I don't have a single scratch on my phone.
travisxcore said:
Send it to HTC then? You get a 1 year warranty when you buy the phone.
Honestly, I think Corning had another incident of releasing faulty glass. I've dropped mine numerous times, from pretty high up and I don't have a single scratch on my phone.
Click to expand...
Click to collapse
How much is it for them to fix it?
I have no idea. Shoot them an email (not Support Inquiry, youre gonna wanna send it to Repair Inquiry) and they should be able to tell you. Make sure you fill out the S/N box out now, or their just gonna send you an email back asking for it.
travisxcore said:
I have no idea. Shoot them an email (not Support Inquiry, youre gonna wanna send it to Repair Inquiry) and they should be able to tell you. Make sure you fill out the S/N box out now, or their just gonna send you an email back asking for it.
Click to expand...
Click to collapse
I'll do that right now. Thanks alot
(sorry to hijack the thread lol)
They use a double sided tape that hopefully comes with your replacement screen , I tried to replace a water damaged screen and it really wasn't a fun process
Sent from my HTC PH39100 using xda premium
It didn't fall very far..
Yeah when mine fell I had it in a shirt pocket, bent over to pick something up and it slid out, fell about a foot and a half..directly onto the search button corner on ceramic tile. Crunch. I ordered a new panel from tmart.com .. I got a confirmation email back on the 4th saying its been shipped via usps.. should be here soon. I hope it comes with everything I need - cost me about $50.00 with the shipping and everything. I paid the extra 3 bucks for insurance lol..
bproulx said:
Yeah when mine fell I had it in a shirt pocket, bent over to pick something up and it slid out, fell about a foot and a half..directly onto the search button corner on ceramic tile. Crunch. I ordered a new panel from tmart.com .. I got a confirmation email back on the 4th saying its been shipped via usps.. should be here soon. I hope it comes with everything I need - cost me about $50.00 with the shipping and everything. I paid the extra 3 bucks for insurance lol..
Click to expand...
Click to collapse
So, how was the installation process? And did it come with the adhesive? I'm going to buy it from that site as well
And then it was fixed..! FTW!
Ok sorry for the delay getting back to you guys.. been frantically waiting for the screen to clear US customs (ugh) and arrive, which it finally did today. I was able to get my hands on it at about 3 this afternoon, but I wasn't able to actually look at it until about an hour ago..
So.. I open the package, big grin on my face..and the first thing I notice is that the glass is AT&T branded. Funny, considering I'm in Canada and using Rogers..but hey a digitizer by any other name...and all that. So! I open the bag that my "tools" came in.. There are 2 blue plastic tools, one a prying tool and one looked a lot like a guitar pick. Cool. There are also 2 screwdrivers included, and I'm momentarily excited, until I realize they're just tiny torqx bits. The Raider uses TINY philips head screws, so those were useless. I put them into my tiny tool set..for later consideration.
Back to the screen. Looks like it the real deal, so I watch half of the teardown vid on youtube.. As mentioned in an earlier post it isn't an english-language vid so aside from seeing the locations of the screws and the methods of levering off the internal components, there's no exchange of information going on. I would like to mention however that the video kind of glazes over the locations and removal processes for some sensitive connections, so having only experienced laptop repairs personally.. I was in fairly uncomfortable and unfamiliar territory - but I was determined.
I tried several ways at getting the phone down to its base components, and finally succeeded in locating the panel's ribbon connector interface on one of the phone's circuit boards. I had to remove the back of the phone, pull the batt, sim and sd, and pull the 4 main screws that lock the housing down onto the phone.. From there its a matter of levering off the black plastic shell and whats underneath is a whole lot of tech in a very tight space. There were 3 or 4 wires I had to disconnect, about 15 tiny screws in 3 different lengths, and then when all was said and done I had to pry the busted panel off using the supplied blue lever tool (pretty handy, actually.) and then lift the lcd away from the metal housing enough to slide the old connector out and the new one through.. This was a very tricky process - I drink way too much coffee to hold completely steady for long..lol.. Finally got it all through, but by this time I had smudged the inside of both glass surfaces pretty badly and it took some serious mechanical dexterity to hold the surfaces and wipe them down without wrecking any of the flapping, loose circuit boards, screens, etc.. it was a frightening experience.. I won't lie.. I definitely feared the worst possible outcome given my limited experience.
So.. the panel's ribbon cable is inserted, the white clip back down securing it.. I manage after several attempts to remember how to put the puzzle all back together, and after about 45 minutes of messing with it I had a visually complete phone again. I hit power, and miracle of miracles the HTC logo flashes on the screen.. I'm hopeful..
The phone boots up, looks great (aside from a few smudges I missed on the inside..grr) so I start touching the screen and here's where we have the first problem..lol.. its recognizing that I'm touching the screen..but not really accurately.. it seems to be that there are dead areas.. So now I'm thinking I broke something..lol..
Smoke break.
Took it all apart again, forgot to clean the smudges, removed and re-seated all the connections, and about 15 minutes later I had it back together again. I booted it up and waited.
Success!! It sees where I'm touching accurately now - I think the ribbon must have moved while I was putting it back together, I was shifting things a lot as I was trying to figure it all out, so I must have stressed the cable enough to move it slightly in the slot.. that, or I didn't have it all the way in / straight the first time I did it. Either way, it works fine now. I was successful on the 2nd attempt, and now the only difference is that this glass feels..rougher? less smooth? not sure how to describe it.. it feels different, anyway.. and the at&t logo of course. Aside from that, you'd never know it was in pieces an hour ago..lol.
Would I do this again? ..I hope I don't have to. Its not impossible, but man, if you're going to try this BE SUPER CAREFUL!! lol..
edit: and no - it didn't come with the double sided tape, but it seems to be staying without having to replace it.. it wasn't too hard to remove it from the panel, but getting it back on straight took some finesse.. lol.. it comes apart easier now when you're tryingn to disassemble it..but seems to be holding together fine on its own.
travisxcore said:
Send it to HTC then? You get a 1 year warranty when you buy the phone.
Honestly, I think Corning had another incident of releasing faulty glass. I've dropped mine numerous times, from pretty high up and I don't have a single scratch on my phone.
Click to expand...
Click to collapse
Corning makes the glass on the Raider/Vivid?
I would suspect it to be more sturdy if its corning, my SGS has been without a screen protector and still does not have any scratches. Yes i know SGS is Gorilla Glass and this is not but i would think it would be stronger.
@ bproulx
You should take it apart again and make a tutorial . I hope i never have to go though what you did. Knock on wood.
lol..might take it apart again..
So..I have smudges on the inside of the glass. Stupid sweaty fingers. Now I'm tempted to pull it apart again ..but not far enough to make a tutorial lol.. besides.. I'm glad I didn't have a camera on me - you guys woulda had a good laugh at me breaking into a sweat trying to pry loose the glass panel the first time..lol. I know it was already broken but (a) I was trying not to cut myself on it and (b) I was also trying not to break the lcd underneath. Which I believe also has smudges on it. Oi.. I guess I'll have to get in there and clean it. Probably not tonight tho. I'm just glad the thing still works - I was scared I was going to bust something. There are a LOT of little things in there. For the record the CPU looks neat. Its smaller than a sim card, a little bigger than a micro sd. Pretty impressive.
bproulx said:
So..I have smudges on the inside of the glass. Stupid sweaty fingers. Now I'm tempted to pull it apart again ..but not far enough to make a tutorial lol.. besides.. I'm glad I didn't have a camera on me - you guys woulda had a good laugh at me breaking into a sweat trying to pry loose the glass panel the first time..lol. I know it was already broken but (a) I was trying not to cut myself on it and (b) I was also trying not to break the lcd underneath. Which I believe also has smudges on it. Oi.. I guess I'll have to get in there and clean it. Probably not tonight tho. I'm just glad the thing still works - I was scared I was going to bust something. There are a LOT of little things in there. For the record the CPU looks neat. Its smaller than a sim card, a little bigger than a micro sd. Pretty impressive.
Click to expand...
Click to collapse
I've taken apart laptops (MacBooks at all) and successfully reassembled them so I think I'm up to the job. I'm reaaaally thankful that it says AT&T at the top and not HTC like the pic shows (since I'm on att).. Another question though, did you successfully get the "void" plastic piece back over the screw? Because, I want to keep this phone as "under warranty" as possible
Getting better at taking it apart..lol..
Chism87 said:
I've taken apart laptops (MacBooks at all) and successfully reassembled them so I think I'm up to the job. I'm reaaaally thankful that it says AT&T at the top and not HTC like the pic shows (since I'm on att).. Another question though, did you successfully get the "void" plastic piece back over the screw? Because, I want to keep this phone as "under warranty" as possible
Click to expand...
Click to collapse
No, the little void sticker on mine was less like a sticker and more like... glue, with paint on it.. lol.. it just flaked apart when I tried to lift it.. but I wasn't concerned with preserving it. Maybe if u use an x-acto or something like that you can lift it intact..? Let me know how you do.
I started getting some random touch input glitches yesterday, and today they got worse.. then my son spilled hot coffee on me and I dropped my phone on the carpet where it of course popped apart..lol..and then when I booted it back up I had some *major* touch glitches.. it was seeing input higher up than the actual contact point, and just acting real buggy..the phone was lagging.. so I took it apart again, completely.. took my sweet time reassembling it this time - I even got out the micro-fibre cloth and cleaned all the glass, and voila.. this time - its like new. I can already tell its put together right this time, which tells me something wasn't quite right before - I'm guessing I didn't get the ribbon cable seated properly before.. there are a lot of tiny, offset contacts on the end of that little cable. Anyway, I guess the moral of the story is screw warranties, and the more times you disassemble your phone the better you get at it.. lol.. it wasn't anywhere near as intimidating this time around. Felt kinda easy, actually. I think I just psyched myself into thinking it would be hard to do the first time around.
I do miss my original glass tho.. I'm thinking about contacting HTC and ordering an oem panel lol.. this one feels.. grippy. The HTC one felt smooth as silk.. I dunno this one kinda feels more like window glass. Meh.. better than a broken ghetto phone. At least now I can whip it out in public without hanging my head in shame and peeking around to see who's looking at my ugly screen. I never even tried HTC directly..I just googled the part and went with the one with good reviews..
OMFG...FML..
Sooo.. I got angry at my Raider today.. started doing the weird touch input glitches again after a battery pull, got frustrated and slammed my phone down on the table in anger...and.... smash. Brand new panel is now ten times as shattered as the old one was. AND...now the phone won't even light up. AND..it looks like I may have cracked the actual LCD this time.. just a small crack at the very bottom - wouldn't even be visible with the shell on the phone.. but.. I'm not very optimistic. I get absolutely nothing on my screen when I boot the phone, all I get is one haptic "bump" and thats it. Nada.
Sooo... looks like I need a new phone. Again.
Lame.
There goes $600.00
....sigh.
Anyone wanna donate an old android device to a guy who's now really really sad and has no phone? LOL.. why did I give away my legend????
Not giving up my phone!! LOL!
Ok so I decided to try my luck at replacing the LCD as well as the busted digitizer that I just re-broke..lol.. back to tmart, and ordered both. I really wish I could have found the whole assembly pre-built, but the only company I found selling both as a single unit had a minimum order of 5 pcs. Out of my price range for repairs, although with my track record maybe it wouldn't have been a bad idea? lol.. anyway, I just bought both parts from tmart and am still waiting for one of them to show up. The good news is I was able to replace the LCD already. It really is just held in there with tape. Like.. there's nothing really holding it all together..you'd think with all those screws and tabs they could have come up with a better way?? Ah well. I have a display again, but until I can get the digitizer and install it I'm without input.. so I can just watch the phone boot and then sit on my lock screen. Or boot into recovery mode and use the vol and power buttons to mess about.. But why..lol. I'll just wait.
I'm just happy that nothing else seems to be affected. I had my alarm going off still with no screen, so that tipped me off that everything else should still be ok. I won't know for 100% certain til I complete the repair, but it looks promising. I picked up a used HTC Magic (ugh) from kijiji for $80 and it came with 3 batteries, 3 chargers, 3 usb cables, 3 leather cases, and a bunch of other crap in threes. Just so I'm not completely without a phone in the meantime. Overall not bad for $80 but man is this phone slow. I installed a custom rom **THANKS XDA!!** on it and it improved the performance and look of the OS a little, but it lags a lot even overclocked when just typing a text.. I can't wait to get my phone back!!
Aside from the screens, this phone is pretty tough. I slammed that sucker down pretty hard that day.. Cmon HTC - why didn't you give us gorilla glass on a $600 LTE phone!?!?!?!? I wish I could find an aftermarket panel that was made from gorilla glass. That would totally rock!
Yeah, i really wish they would've put gorilla glass on it. I used to have the atrix and ive dropped it on tile floor at least 3 times... Nothing. Keys in the same pocket as phone.. No scratches at all.
I didn't want to try my luck, so I just got a replacement vivid

Categories

Resources