i put 2.6.34_AVS-925mV_CFS_20100517_1023.zip in my sd card
turned off phone and rebooted into recovery
selected the flash from sd card
saw 2.6.34_AVS-925mV_CFS_20100517_1023.zip.zip
rebooted normally
way simple steps i took (did a backup first ) and now it says my kernal is by intersectr and not cyan. i know thats the point HAHA but thats how its done right? i dont know any commands or anything and didnt know if this was a correct method to update it.
You did everything correctly. Enjoy
Related
i have a class 6 adata 8gb 2gb ext4 64mb swap rest fat32
im running cyanogen 4.0.2 or 4.0.4 whichever one i load up from sd at the time, but both are stable. i have newest radio and spl also. the issue is simple. i can get into recovery mode and bootloader menu. everytime i reboot it goes to bootloader menu(3 skateboards). camera button is not held down either or stuck. the only way to get past this screen is to evertime i reboot to factory wipe and install new rom which is a pain. i was wondering if by having the original image DREAIMG file in a folder on my sd is whats causing this. but now that i cant get past this screen i cant remove it from sd. i also already tried mounting sd to comp from console using: "ums_enable" it does nothing(tried it on 3 computers). im tired of reseting and reflashing. pls some assistance.
Have you tried to reflash the SPL? You could just redo the entire root process and replace everything.
New Isuue, Same Problem
Sorry it took so long to get back here. No I haven't tried that. How could it be the SPL? Im asking it in a meaningful way, like why and/or how could it be?
I will reflash the SPL tonight and edit post if it works.
I also erased my sd card and re partioned in in "parted" it booted fine. The battery died today and i rebooted it and BAM! bootloader screen again. So i factory reset and flashed a new ROM image. then it worked fine. now only problem is the private apps i have installed wont work and they get stuck on uninstalling....Whats the fix for that?
Thanks XDA!!
You need to start over and replace everything. It sounds like you have multiple problems. Use THIS guide starting with the downgrade bacause it will reflash EVERYTHING on your phone. If the problem persist then it's hardware issues. Redownload everything, don't use anything you already downloaded because these files might be bad too.
Ive got a big problem, recently my old SD card **** out so i replaced it with a brand new one with nothing on it. Upon first boot nothing was loaded because obviously APP2SD puts everything on the SDCard, however not even market was loaded on the phone itself so it was impossible to even download anything
Now the big issue!!
In my stupidness i thought i would just wipe and reflash a new CM with the new SD card and see if that fixed everything.. However i wiped and then i realized i didnt have a new ROM on my SD card to flash back too!! so now when my phone boots it just boots to a black screen and nothing appears because there is no rom to run... my phone itself is wiped data/cache and my SD card is completely clean due to it being a brand new one
How can i get my phone working again? right now it is INOP as i dont have any rom on it whatsoever and it wont even boot, i dont have a microSD adaptor to put it on my computer with and load a rom on it
is there some failsafe way to get it back to stock firmware incase something like this happens?
This should be in the Q&A section.
But,
What recovery do you have?
[edit]
oh right, drop into terminal Alt+x, type ums_enable and connect your phone through usb and copy over the rom and Amon Ra's latest recovery.
Joe92T said:
Ive got a big problem, recently my old SD card **** out so i replaced it with a brand new one with nothing on it. Upon first boot nothing was loaded because obviously APP2SD puts everything on the SDCard, however not even market was loaded on the phone itself so it was impossible to even download anything
Now the big issue!!
In my stupidness i thought i would just wipe and reflash a new CM with the new SD card and see if that fixed everything.. However i wiped and then i realized i didnt have a new ROM on my SD card to flash back too!! so now when my phone boots it just boots to a black screen and nothing appears because there is no rom to run... my phone itself is wiped data/cache and my SD card is completely clean due to it being a brand new one
How can i get my phone working again? right now it is INOP as i dont have any rom on it whatsoever and it wont even boot, i dont have a microSD adaptor to put it on my computer with and load a rom on it
is there some failsafe way to get it back to stock firmware incase something like this happens?
Click to expand...
Click to collapse
You could try posting in the right section.... or you could go to recovery, drop to console and type ums_enable- then connect your phone and move a rom over
Joe92T said:
Ive got a big problem, recently my old SD card **** out so i replaced it with a brand new one with nothing on it. Upon first boot nothing was loaded because obviously APP2SD puts everything on the SDCard, however not even market was loaded on the phone itself so it was impossible to even download anything
Now the big issue!!
In my stupidness i thought i would just wipe and reflash a new CM with the new SD card and see if that fixed everything.. However i wiped and then i realized i didnt have a new ROM on my SD card to flash back too!! so now when my phone boots it just boots to a black screen and nothing appears because there is no rom to run... my phone itself is wiped data/cache and my SD card is completely clean due to it being a brand new one
How can i get my phone working again? right now it is INOP as i dont have any rom on it whatsoever and it wont even boot, i dont have a microSD adaptor to put it on my computer with and load a rom on it
is there some failsafe way to get it back to stock firmware incase something like this happens?
Click to expand...
Click to collapse
Go buy an sd reader. Or if you have aman ras recovery you can set it to go to usb fro the recovery menu.
first - wrong section
second, if you have a custom recovery - go to the shell and type
ums_enable with usb plugged in
inop
You need a card reader and the ra dream recovery and you would of fixed it
Wow all of you said the same thing?
And repeated it
Even ^ copied the rest of you by saying got rec mode.
ur first card prooly didnt go bad, u prolly didnt flash the ext-fix from cm..correct? thats what happened to me and i then realized my sd was fine, i was also stuck at the g1 screen b4 i flashed the fix. also from what i read all u did was wipe so ur rom is still there, see if u can grab the old card and getter dun. and stop being a jackass and post this where it goes!!
Post in the correct section, next time, please.
Moved.
Long story short:
I was running this: http://forum.xda-developers.com/showthread.php?t=926116
and decided to reflash it. After flashing Firerat's Recovery another time (from the same file on the SD card that I have used many times before,) I rebooted into ClockWorkMod recovery and went to flash zip. from sd card but it could not find the sd card and then crashed. I then went into the rom that already existed, it could not read the sd card either. Not knowing what to do, I then went and followed the instructions for "if you found yourself stuck without recovery:" http://forum.xda-developers.com/showthread.php?t=831139 here. From there I did a hard reset and now the phone is running Android 1.1, but the Sd card slot still doesn't work.
(Kind of unrelated, when I just got the phone the camera would not work, and would Force Close whenever I tried it. Same thing on any Rom I tried on the G1. After the hard reset however, it started working.)
Anybody know what to do?
I rooted my nook yesterday using the autonooter 3.0 which i guess is not official, but anyways, I'm just not happy with it and I would like to get my Nook back to stock. However, when I try to do 8 failed boots, it won't cancel the boot when I press the power button. I mean I am jamming it down and it still goes through the boot.
Unfortunately, I also have not figured out how to get adb working. I followed the instructions on nookDevs and adb devices kept showing my SN as 11223344556677. Mind you it was showing up fine in device manager as Android composite ADB device. I figured heck with it I'll just root it. Now its not showing up at all.
So it seems like I'm hosed as far as resetting my nook. Any way out of this?
install clockwork recovery and use that to flash the stock rom.
ok well I installed ROM manager and then flashed CWR to my SD card. I then made a backup of my current rom in case I somehow decided to go back to it. But after selecting reboot system now in CWR it keeps booting into CWR. How do i get out of it?
Is the SD card flashed to CWR still in there? Is like a pc set to boot from the cd drive before hdd, no matter what, if theres a sd card in it, it will try to boot from it first..
You can remove the sd card when in CWR just remove it and then select reboot
Sent from one of those missing Droids
Yeah, I took it out. But for some reason it didnt recognize it wasnt in there. so it was pretty much boot cycling just it was going into CWR. I just flashed the stock 1.0.1 ROM so it's working now, just have to reregister the nook.
Hey,
Been trying to reset the tab to factory defaults the tab does his mojo untill it reboots into android 2.3.6 and then everything is still on the internal SD card.
Then i went to hook it up on the pc tried manually deleting everything on the internal SD pc say's its done i look in the tab and its all still there.
Tried copy'ing files over to the SD card but does not wanne stay on it.
Ok now then i went on booting odin up and rooted it + cwm recovery on it it does it like a charm and works can boot into the recovery.
Now since i cant hold any roms on the internal sd card i went on using an external sd card put on cm 10.2 and gapps,
Installed the rom then reboots into a newer version of cwm and it tells me its not rooted.
ok fine i restarted the tab and went back into recovery then it was rooted.
Went on to install the cm 10.2 and gapps now its hanging at the cm logo on boot
So i went on to flash dbdata.rfs.tar wich normally gets me passed a bootloop.
This time however it dident work.
Anybody has any ideas i can still try to get it to work ?
I think its more of a lock on the internal SD card since it can't hold any files nor delete's anything but im not sure hopefully some1 with some more experience then me can help me further on this problem
Thx
Not locked. The internal SD chip is failing.
You will see many post that has symptoms such as: previous owner info cannot be removed. New data cannot be saved. Wiping failed.
My mind was vaguely thinking that but still hoping it wasent