I have a cpl of questions:
1. Has anybody used Blackberry Connect app for WinMo on B7610/I8000?
2. Have u been successful?
3. Where can u get the Blackberry Connect?
A million thanx in advance!
Related
I have seen many many threads on how to use bluetooth internet sharing to set up a connection on your PC using your phones GPRS/3G but is there an opposite way to do this so i can use my dsl at my office on my phone via a bluetooth connection to my work pc? i remember doing it on my SE phone a year back but i have yet to figure out how to do this on Windows Mobile 6.1
it has already been asked many times. but to make it easier on u, yes u can, when u have the machine connected via activesync
Hi there,
I got a car-pc since a while and have been using my sony ericsson with it... calls get transferred via bluetooth to the computer, as like phonebook in integrated into the car-pc software... all transmitted via bluetooth...
Now with the diamond, how do i set it up as a phone? winXP doesnt recognize other services than the moden funxtion
you should enable Remote SIM access on you Diamond: Start -settings - connections bluetooth SIM acces and also activate the service for your BT connection (do this in the first tab of the BT settings dialogue after connectig)
already done :-( But the Computer doesn't list other functions than modem for the HTC
Do i need any drivers for XP? Usually not...
Using Diamond & CarPC Via Internet sharing over BT
I have a CarPC in my car, it has a 7" touch screen & it is running WinXP and have built in Bluetooth. So for surfing in the internet , MSN, Skype in my car over the carpc i am using my HTC Diamond with the Internet Sharing icon and connecting it via Bluetooth to the carPC so i get FAST Internet over Bluetooth between my carpc and my HTC Diamond.
It works very good - very stable.
Matter of fact it is "capturing" my 3G Internet and pass it over Bluetooth to the carpc.
Solution works very well.
k, but i am not interested in using it as internet connection, i want to phone via the computers hardware, so the car-pc should act as an headset... besides that, he shoult be able to access the adress book and to begin calls... that for, i neeed 2 comports emulated, but how to create them?
could it be because the device is seen as a PDA, and not as a mobile phone?
I know somewhere here on XDA there is a reg hack for earlier devices to make them appear as a mobile phone to car kits. maybe the same thing will help here. I don't know where it is, can only suggest searching, unless anyone else can point you in the right direction....
I used to have PhoneConnector on my CarPC, with PhocoAdapter on the phone. It worked, but now this software is not supported anymore and unfortunately it does not work with WM6.
Freefone is not compatible either.
My good Blackbaron, I believe we users of CarPCs and Windows Mobile are scr...d!
By the way, sharing the 3G connection workds a treat, by USB, BT, Wifi... I just wish Vodafone would allow other ports than port 80
I still didnt realize what 3G is... ^^ I never owned a ppc before...
Well, on the CarPC the internet speed is as great as a DSL line, here is France I measured it at more than 3.5 MB/s (KS20 is limited to 4 MB/s with HSDPA, who knows why). Coming from the crappy Edge Motorola phone I had before, the browsing is truly amazingly fast!
help
golympio can you tell me step by step how to connect htc diamond via bluetooth for internet?
Try this app called JetWare
gerardo66 said:
golympio can you tell me step by step how to connect htc diamond via bluetooth for internet?
Click to expand...
Click to collapse
1) Launch the Internet Sharing application on your phone (all WM6 phones have it)
2) Select your 3G connection, and BT or USB, tap "Connect"
3) USB: have ActiveSync installed on the PC, connect the USB cable, it's done.
4) BT: you have to set up a BT PAN hosted from your phone, add your PC to it, it's done.
5) If your provider uses a proxy, setup Firefox to use it (Tools/Options/Advanced/Network)
6) If your provider has a filter on User Agent, then you need the plug-in "User Agent Switcher", to put the same User Agent string as on your phone.
There you go!
zmob123 said:
Try this app called JetWare
Click to expand...
Click to collapse
Looks interesting, I'll give it a try when I have some time. Do they have a trial version?
Yes they have, i leeched it... But i don't find the difference between now and before installing it...
So i have installed Athine lite, PDACornerUltimate.V17, and HyperDragon IV. Athine lite and PDA v17 are both based on WM 6.5 and i can not get WM remote desktop to work it just hangs @ connecting with no error messages. Hyperdragon based on 6.1, RD works just fine.
Any1 have a solution to get this working on v6.5? i have installed Mocha Remote Client and Terminal Services 2002 and both of those work just fine on WM6.5, but i really want to be able to map my device to the machine.
im currently running Athine lite as its fast and clean.
would you mind explaining how you got it to work the first time? im a little confused about the domain and ip address and such
so what is no one having a problem with this?
same problem here, just sitting on connect...
And there's no traffic since HSDPA doesn't kick in (switching between H and 3G symbol).
I've been trying Anryl's latest ROM's. 21202 rev 8 or 9 had RDP as part of the ROM at that connected ok.
I've just upgraded to his 21500 rev 5 and RDP is not embedded so installed from the .cab I used with WM6.1 and I get the hang at 'connecting' problem.
Don't really want to downgrade but may have to...
Same here. It worked with 6.1 but I install the same cab on 6.5 (Tai BlueCalm ROM) and it just hangs when trying to connect. I can't figure it out.
I found this link in XDA Developers and it works now for WM6.5.
http://forum.xda-developers.com/showthread.php?p=3592033
Was anyone able to establish a connection with this version of rdp 6.5? I only get connection errors when I try to connect to my Vista SP 2 System (works from any Windows XP and Vista device, so its no issue with my pc).
TyTN II & WinXPpro Remote Desktop connection without router or internet
Hello Everyone, forgive me if this question sound stupid but
I need to remote control my laptop using TyTN II Winmo6.1
1. I have installed WM6_RDP on winmo
2. I dont have router or any other intermediate communicating device.
3. Laptop & Mobile both Wifi capable.
can i use wifi capability of both devices and communicate between them. like ad hoc in windows XP
IF this is possible,
1. can you please tell me settings on winXP pro machine and what needs to be installed
2. Using Remote desktop on winmo how can i connect - settings please in winmo.
baseline: I need Remote desktop running on winmo over wifi with just one laptop and without router or modem
thanx in advance
sarang.hanwante said:
Hello Everyone, forgive me if this question sound stupid but
I need to remote control my laptop using TyTN II Winmo6.1
1. I have installed WM6_RDP on winmo
2. I dont have router or any other intermediate communicating device.
3. Laptop & Mobile both Wifi capable.
can i use wifi capability of both devices and communicate between them. like ad hoc in windows XP
IF this is possible,
1. can you please tell me settings on winXP pro machine and what needs to be installed
2. Using Remote desktop on winmo how can i connect - settings please in winmo.
baseline: I need Remote desktop running on winmo over wifi with just one laptop and without router or modem
thanx in advance
Click to expand...
Click to collapse
Yes you can with an ad-hoc connection. You'll have to google it though, as no one can tell you the exact details for your network as you will have to use an internal IP address. Start by googling how to use the "ipconfig" command in dos, as that's a good way to find out internal addresses quickly.
Start here:
http://www.microsoft.com/windowsxp/using/networking/setup/adhoc.mspx
Thanx for Reply Stuntdouble, but need more info
Thanx for reply stuntdouble but i need some more info regarding the same.
1. Link u have forwarded - I have already did before made a adhoc connection on my laptop and connected it from my winmo.
2. winmo cannot connect thru wireless though when connected thru USB get working fine.
3. I cannot even see a different machine other than my own PC in network neighbourhood.
4. I have installed Network access from HTC but it also dont show any computer in LAN conected while connected on adhoc.
please reply if this could be sorted.
thanx in advance.
Sounds like there's a firewall blocking the connection on your pc.
hey guys. just wondering if anyone knows of any software that i can connect my diamond to via bluetooth to by laptop when I am at home so all sms i recieve pop up through the laptop? and so I can also reply to them by typing it on the laptop rather than the phone.?
thanks.
Ryan
there are a few things you can use...
1. If you got a free data plan then try something like dashwire... just google it and its the first link. Its web based so you'l need internet access from your computer... i've tried it and works great.
2. Otherwise i use Jeyo mobile Companion 2.1
I use this when my HTC is connected by USB to my laptop through activesync. It also keeps my htc charged up
Jeyo mobile is like a mini outlook program, and works brilliantly. cant see why a bluetooth connection via activesync wont create the required partnership and once you tried it i can guarantee its what you need. i used to use it at work as i had to tell staff off for texting on ther phones and didnt want to be seen as a big hypocrit... hmmmm i have no morals!
3. There is also SOTI pocket controller, which puts the diamond device on your PC desktop. Again this requires activesync and from when i used it, it was a bit slow. I use to use this for my MDA compact3, but after i found Jeyo mobile ther was no going back.
Jeyo mobile also backs up contacts, call history, sounds and other personalisation. I hardly use it anymore but its one app really worth paying for... i think there is a 30 day trial on the download. Hope this helps pal.
Jeyo mobile is like a mini outlook program, and works brilliantly. cant see why a bluetooth connection via activesync wont create the required partnership and once you tried it i can guarantee its what you need.
Click to expand...
Click to collapse
I use Jeyo ME with both USB and with a Bluetooth partnership, works great.
Hi, does anyone know how I can get blackberry connect on my Omnia 2? I love the phone but would like to use push mail as on the BB. Cheers