Related
sorry if this post seems to be a repeat , but i tried the search option and the results were not fruitful
a friend of mine , while trying to upgrade to a TNT ROM , didn't HardSPLed the device first , and successfully changed the ROM of the device , now it is stuck on the blue screen with SPL and IPL versions , and no response . for some reason , the device can go to bootloader mode , but it can not be reflashed , and it does not respond to a hard reset command.
please advise on what to do
regards
When it is in the bootloader mode, and connected via USB, is there a little USB icon in the bottom left? If so, simply flash your phones carrier ROM and all should be fine with it again. You can then apply HardSPL and flash to the TNT or any other ROM that you want to. Is your device a G3 or G4 by the way? What are the numbers after IPL and SPL?
well my friend says that the USB icon is visible there , and the device was indeed a G4. the thing is , what exactly should he do , in order to flash the ROM , since non of imate roms work for it. should he use any special software?
i'll greatly appreciate your help
Is he using Vista or XP?
he is using Windows XP , could it be the PC OS that caused interference?
Well, only if it is Vista does it really matter. He needs to get ahold of an original carrier ROM, such as the O2, or T-Mobile one and flash it to his phone, then HardSPL it, then upgrade to 6 or 6.1.
Download and flash Wizard_love Rom,it might do the trick,then HardSPL and upgrade to any wm6 or 6.1 rom.
What exact error it gives while flashing imate official rom ?
well the wizard has been an imate ,and it was flashed with an Original imate ROM already , but no success , any other suggestions?
thanks again
error [294]invalid vendor ID :
This Update Utility can not be used for your PDA phone.Please check your update utility.
here is the picture
http://i35.tinypic.com/29v03rl.jpg
and could you please give a link to the Love ROM?
thanks
Download wizard_love Rom from this link:-
http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
well he first got this error while upgrading
http://i33.tinypic.com/ivjz8o.jpg
then he managed to upgrade , but had the very first screen after ugprading on PPC screen , and nothing happens
it also gives a failure message while trying to manually Hard Reset after upgrade
please advise on what to do next
greatest appreciations
No SD Upgrade even tough... MTTY hahahaha
king_dani said:
well he first got this error while upgrading
http://i33.tinypic.com/ivjz8o.jpg
then he managed to upgrade , but had the very first screen after ugprading on PPC screen , and nothing happens
it also gives a failure message while trying to manually Hard Reset after upgrade
please advise on what to do next
greatest appreciations
Click to expand...
Click to collapse
It seems you need to follow the drugstore MiniSD upgrade but...
I guess you dont have another wizard to make a bacuk up... so wait a minute...
You don have hardspled yopur device...!!!
HAHAHAHA forget it!mmmm
Maybe mtty... folow mi signature maybe works
See you There Men!!!!
HELP PLEASE!!
Ok so i think i bricked my wizard!
I have the t-mobile MDA wm5 unlocked g3.
I've flashed it to the WM6 Rom and everything had been working well, except there was no MMS feature on the phone at all which sucked! . My girlfriend thought it would be better if she did the "windows mobile update" icon feature that was on the phone to speed up the phone....She downloaded the updates & my phone shut off!! When it rebooted everything seemed normal...
1st.
T-mobile screen
IPL 2.26
SPL 2.26
GSM 02.25.11
OS 10.1.0.811
-Then i get the green windows mobile splash screen, but after i get an error message!!
*Device Authentication*
“Device authentication failure. Please contact the product manufacturer. For reference, please provide your device ID.
3563820017905901 38000050bf3f5173”
Ive tried to boot in safe mode to try & flash my phone again but for sum reason my computer wont recognize my phone is plugged in! What do i need to do?!? Please help, any help is thankful!
is not a bricked wizard men
easy men easy... but please tell to your girl dont push everything that she dont nderstands... Everybody knows that upgrade official is only for original OS like windows XP or VISTA..
Firs of all
Put your Wizard on bootloaders mode... plug in via usb the PC Active sync wont recognize your phone.. then run the original shipped Stock ROM and then your Coocked rom...
But if the PC at the same time you place your Device on Bootloaders and plug it via USB... shows a pop up message that said Windows cant recognize your device or unknown device or something... Restart your Pc... Hard reset your PDA... and replug your Device as I said it before... if not check your USB cable maybe a broken cable failure...
IF NOT?????!!!!!!!! then Use another PC with XP!!!!!
If it still on his not reconized message you are in serious problem but your girfriend Too...
Good luck
Easy..."Device Authentication failure" is caused by your ROM. Just flashing another custom ROM and the message should go away.
I'm surprised that the chef that made your WM6 rom left the Windows Update feature in there, it was bound to crash a cooked rom, since the update service never worked properly anyway.
I'm sure flashing another rom will resolve this.
yeah, flash the rom (you might want to try WizFlo 20273 v6.1.1.3 - i'm on it, and loving it). heck, you can even do a hard reset and that would probably resolve it.
HI Guys,
is it possible to flash (or check if R3 is existing ) via SEUS when i have installed hardSPL?
When I follow the instructions in SEUS the application doens't check my firmware...
I got in tricolor mode and attached usb cable but nothing happens?
do i have to revert to stock spl or is there a special trick?
thanks & greets from austria
Alex
No, u dont need to revert to stock SPL for using SEUS..
Just make sure u have sync ur X1 properly with activesync/windows mobile device center before using SEUS.
But if u'r using cooked ROM, i suggest u revert back to Stock ROM first.
hm, weird..Im having the same issue..
perhaps its win7 related
That's odd. I thought the new SEUS should work well with Win7, itje.
I just tried on my laptop with vista...It started with no problem
but I dont get any r3 updates, just to reinstall the stock rom I now have...
itje said:
hm, weird..Im having the same issue..
perhaps its win7 related
Click to expand...
Click to collapse
I think it's not Win7 problems. I've tried it with Vista, SEUS didn't work when I was using cooked ROM, then i revert to stock ROM and it works.
lol, did you think I tried with cooked rom?
I have try it with hard-spl olinex and with my own custom rom that is a light version of official rom (without videos and ringtones) made be me. jejeje
And seus works ok. Not problem at all..
Bthw i use win xp pro sp3
i have tried it now several times, only one time the status screen "checking version" came up but didn't really do anything....
reinstalling of seus didn't change anything
What ROM r u using? Cooked or Stock ROM?
I'm using generic_AT_R2 rom / stock...
but i have just discovered that my battery is < 50 %
will charge it now and try again later... maybe sw checks the status? (error message would be fine )
hy all
Small seus guide
1.unplug the phone
start seus and click next till it asks to connect phone
2.pull the battery
press volume down and power (enter bootloader)
3.connect the phone
and seus will recognise it
br
Hi Jerpelea..
Can you confirm if SEUS works with Cooked ROM? Some ppl reported SEUS worked with it, but in my experiences, it never worked with WM6.5. Or maybe SEUS only works with WM6.1 cooked ROM? or maybe I miss something?
I have use seus with my own custom rom that i made with an original wm6.1
R2AA from LAM i just take out the videos and other stuffs like bigs mp3...
And seus has work well...
hi!
i justed tried it with a full battery but same mistake again...
went through all instructions, phone is in tricolor, connected usb but then nothing happens...
i'm using SPL-0.72.OliNex
any suggestions?
thanks!
hi again!
just tried it again on a differnt computer, now i tried it with windows XP
and it worked
so there is a big problem with vista sp1..
tried to reinstall drivers and so on but it simply doesn't work
-> win XP worked great now I have 3RAA007 generic AT
greetz from AT
Well i think the problem is Vista/Windows 7.
The odd thing is that it can discover the device when it's not in bootloader mode(though not flash it because it's not in the bootloader mode).
It tells you the device couldn't be verified, but to me it seems like the program will only work if your device has an established partnership with ActiveSync/Mobile Device Center. But the device in bootloader mode isn't capable of establishing partnership, and therefor it doesn't get detected by the application.
That's my theory atleast.
I've used seus with a custom rom. But it definitely doesn't work in win7.
XP it works everytime, and vista seems a bit hit and miss..
I got my phone last friday and tried SEUS almost straight away, Windows 7 really doesnt like it. Had to use my xp laptop
Hmm... weird. I'm on HSPL with an original ROM, but not stock.
SEUS goes as far as "Checking connected phone" and then exits.
Any ideas?
-KJ
Hey everyone. I'm tearing my hair out trying to get this sorted but I just don't know what to do!
So, when I got my X1 as everyone on here should do, was flash my X1 with the HardSPL and some custom roms, this was a few months back. Then, shock! Horror! My case went and broke, (cracked near the volume button build W44) so I sent it back to SE for repair. I sent it back reset back to defaults but left the hardspl on there.
SE sent me a brand new phone (I think... This one says under the battery build w50, but the battery says w32..) I received it today. I thought it would be my old one repaired but SE had other ideas. Booted up and have Image Version: 1.03.931.10 and HardSPL 72.000 I think I said that correctly...
Now since sending it for repair and receiving it back, their seems to be quite a few wm6.5 roms floating about, and obviously I can't use the stock software as that wouldn't be right!
Now I have tried flashing the hardspl to the phone through my Vista PC and all it keeps giving me is connection errors. I thought maybe it was already flashed so I tried flashing just a rom, and that just made the phone get stuck on loading (flash by memory card). I thought it might be Vista, so I tried doing it on my other PC (XP) and I get the same issue. This bloody thing won't flash!
I have had "Connection Problems" - "Update Errors" with different numbers. The current one being Error [260] CONNECTION.
Now I have been searching around through the hardspl thread and other places trying to find out what I need to do or how I can fix it, but everything I try doesn't make a difference. I did read some other people with recently repaired phones having the same problem and perhaps SE have put a new spl thingy-ma-jiggy on there. (Please forgive the technical jargon, I have no idea what im on about.) I have also tried the ticking/unticking advanced network functionality, but that hasn't made a difference either.
So by the end of typing this, I have little hair left. Let's hope you can all help, before I have none left!
I would appreciate ANY help! Really.
Just wanted to add, I was at first getting the phone to a loading bar when flashing, but it would stay at 0% then flag up an error on the PC. Now after the tri-colour bars, the phone just sticks on Loading...
Well just to update. I have been trying to sort this since posting. I flashed the rom to an old UK generic one, as I read in another topic people had to do that before HardSPL. Done that, and tried flashing the hardspl. Same thing, just getting connection errors.
I tried going into bootloader and running the hardspl from there. It works and the phone gets to 10% and then gives an UPDATE ERROR. The phone is now bricked, and I have to reflash the original wm rom to get it back.
Though the Tricolour screen now shows 0.52.Olinex
Any ideas?
Shameless bump for help.
very stupid situation.
i have the same situation in puncto of flashing.
i get my phone three month ago.
after hardspl i .... sorry, no hardspl ... the phone says at 0% bla bla bla
i solve the problem by consulting one night absolutly stressing again and again and again .... google ... xda ... google
than 3 thinks at one time was the solution:
0. need activesync - connect !!!!
1. SDA_ApplicationUnlock.exe for desktop pc
2. enterbootloader.exe for pocketpc (please, the right version, it exist for eten too, but we need the xpediaversion ..)
3. changing registry-entries
how to:
activesync-connect, than copy "enterbootloader.exe" to pocketpc. it must be root, not sd-card. use a pocketpc-registry-program to change these values :
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001001 = 1
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001005 = 40
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001017 = 144
HKEY_LOCAL_MACHINE \Security\Policies\Policies\0000101b = 1
if not exist than add the key.
now, start desktop-program, follow instruction EXCEPT reboot.
start "enterbootloader.exe" on pocketpc. now, you can install hardspl and the device is flashable for ever.
thats works on me, hope it could help you too.
Thanks for the reply. Not had time to try it till this morning. Ok so, after spending about an hour trying to find the correct enterbootloader.exe I finally realized, that the hardspl package includes it. *Duh!* So that was time wasted.
I changes the registry values as you said with Resco registry editor, and follower the unlock then enterbootloader.exe Start HardSPL package. Starts to install. Gets to 10% then I get
ERROR [262] : UPDATE ERROR
The rom update utility has encountered communication errors during the update process.
So im open to suggestions if anyone has any. I just can't understand why it's not working. It's not a problem with my computer or cables. I flashed the phone before I sent it for repair and I have tried doing it on two computers one with XP 32bit and one with Vista 64bit.
hmm. would u like to install a custom rom, or a stock rom?
msg me, and i hope, i can halp u.
I want to have the hardspl on there so I can flash custom roms.
If it's a case of the software/firmware/hardspl whatever you call it, has been updated by SE. How would one go about getting it flashed? Would we have to wait for an update HardSPL to be released?
U read this thread?
My first hardspl was from this thread. New X1 will come tomorrow back from SE (vibration was defect +++ some more problems with case), and i will try it again with this thread.
hope, this will help u mate.
Yeah, I have been through that thread with a fine toothcombe trying everything suggested to see if I can make it work.
When you get yours back, if you have to do anything out of the ordinary to get it to flash or can't do it. Please come and let me know in this thread. If they have updated yours like mine, and yours won't flash, at least I won't be the only one!
k, i will msg u tomorrow around 2pm.
Cheers.
In the meantime. Does anyone have any other suggestions I could try?
Bump, for some help.
now i know, what is exatcly your problem.... <--- SAME Problem
i hope, i will find a solution and msg u then. if u´ll got a solution for this prob, msg me too plz.
Solution found in this Thread!
Download this and unzip it to your device. ++ run it. It will start your X1 in Bootloader menu and say "0.52.OliNex".
Then start hardspl while X1 is in Bootloadermenu....
FINISH =)
Thanks for the reply matey. Glad you got yours sorted. Just tried what you said and I get 0% then it switches to ERROR [262] : UPDATE ERROR.
vwrmic said:
Thanks for the reply matey. Glad you got yours sorted. Just tried what you said and I get 0% then it switches to ERROR [262] : UPDATE ERROR.
Click to expand...
Click to collapse
hmmm... it works fine on my new x1. are u sure, that u start the ssplmanual on your x1 and not on your computer?
Yea, im not sure what the problem was with it. Thankfully I have it done and dusted today! Because I flashed it earlier to an older official version, and you said you got it working. I presumed you had - had yours flashed to the newest version due to it being off for repair. So I reflashed the official update and fully updated it. Then tried hardspl which didn't work. Tried with the advanced USB thing off, tried again with how you said you did it above, and Viola!
Hip hip hoorah! Thanks for the help. Can finally use me bleedin phone now!
no problem mate hf with your x1
hello,
i see smilies and yea's ...
for me to understanding (for next time or other users):
1. complete official update (if exists)
2. flashing (hardspl) without "advanced usb"
thats all?
cool.
Qhen I put the latest version of the radio on my Blueangel i see the error messege. I see how I can pot new version of Radion on the blue angel here.
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.15_Upgrade
i make step by step everything but show me error messege then I make 7th point from this link again show error messege in the program.My pocket PC now is don't show anything. When put the phone on the stand now show only USB and V2.08 under them. nothing light and nothing power on. I try to make hard reset on the phone (press restart buton and power on buton) but do nothing on the screen. I outside the battery and sim card about 10 minutes , then put again into the phone now the phone doing nothing when i try to turn on. I don't know whats happened can anybody help me?? Is my phone dead ?? ;(
now i try to make other way to put another radio but nothing work ... i am dissapointed pls help ...
ok, i understand your situation and i think your phone is not dead, but to find out and to find a way to a solution, you have to give a little more information about what happened:
-what error did you get?
-at what point exactly?
- what os are you using on your pc?
- what rom are you using on the blueangel?
- are you sure, it is a blueangel and not a harrier?
- was your battery fully charged at the point of the first upgrade attempt?
- was the sim card in the device?
- was the sd card in the device?
many people get stuck in bootloader (ok, most of them with a rom upgrade, not the radio, but anyways). until now, we got them all out of that problem and got their devices running again, but it is hard to guess from here, what went wrong, when you only describe your emotional status and not the device's
with best regards,
Chef_Tony
thanks now everythink is write ..
now if you can help me i want to put into my qtek 9090 phone new radio version and another rom with manila because it's easyly to using for me.Now can you help me to install new radio version now is 1.12 I install 6.5 rom but now i want change it with radio and new rom with manila.Now i don't have any error in the phone after flashing rom now it's ok.
I use in my PC windows 7
now in blue angel (qtek 9090) is 6.5 but don't know which version or distribution
I dont have sim card or sd card in phone wehn installing
battery is goot charged more than 90%
sorry for my don't good english if you can i want help me pls and I can't find accurate links in this forum. it's very good forum but I am not professional in flashing rom but I want make it.
for flashing with windows 7 you need to install a special driver first, you find a tutorial and the download of the driver -=here=-.
it never worked for me though (windows 7 ultimate x64) because the x64 is somehow strange. i hope this was helpful, because i didn't really understand your question
tony i need your help