Database Develop

CRASH after updating Rom 1.32 to 1.34 !! :(:(

Hello everybody, my name is sebastien and i come from belgium.
I have a problem with my mteor mobile phone. I was one version 1.32 and i tried like everybody to upgrade it on 1.34. Now the phone doesnt work anymore (freezing on the startup screen).
The bootloader is working (power + cam button), but i have different versions of rom upgrade utility on my computer. Only one version works (v3.12.3.0, properties of ROMUpgradeUt.exe). This version of upgrade rom utility came with the 1.34 rom.
The others one give me an 260 Error : Update Error. (crash on "verifying information on your smartphone, please wait").
So i tried the working Upgraderom Utility with all the roms i have (1.13, 1.32 and 1.34) and i have always the same error after 1% updating : 294 invalid vender ID.
I tried to put the firmware on the root of my microSD card (rename BREEIMG.nbh). The bootlaoader checks the firmware ("checking") and then it says "00028002" "Not allow" and then it goes back to the bootloader. I tried this method with the three firmware i've got.
Could you help me please !! Thank you very very much. Sebastien.

Hi
I have a same problem

Hi lacenko!
just put your mteor in bootloader mode
connecto to pc (disable activesync usb connection)
and start the mtty (usb console program) -> infos about in wiki!!
now just use the info command and look what cid you have!!!
after you know that search/ask provider for an update !!!
only this can help!!
after you have the original shipped rom, please upload it to rapidshare and we can link it...
when you have flashed you can reflash with a other newer better rom!!
but theres no way now until you become a rom that matches your cid to flash the phone to working state!

I Can't Upgrade my device

Heloo every one ... i'm tired from this pda p3600 ... since 4 day's i wanna to upgrade my rom from wm5 to 6 & the upgrade process didn't work ... i try everything .... but non is work ...
first i was trying to make upgrade through windows vista home premium but didn't go well & this is the photo for my problem :
http://www.freewebtown.com/Haitham/CIMG0511.JPG
http://www.freewebtown.com/Haitham/CIMG0512.JPG
http://www.freewebtown.com/Haitham/CIMG0513.JPG
http://www.freewebtown.com/Haitham/CIMG0514.JPG
http://www.freewebtown.com/Haitham/CIMG0516.JPG
then i try to upgrade through my freind windows xp ... and also didn't work good .. the error message say that the phone is unable to upgrade do u rom flash or something like that ... so i try to instal the unlock & also same message ....
i'm in **** mood ...
any one can help me please

Until the new version of WMDC is released with fixes, I suggest you use XP computer to do upgrade.
New WMDC v.6.1 coming soon: http://windowsvistablog.com/blogs/w...ows-mobile-device-center-6-1-coming-soon.aspx
The XP computer needs to have Active Sync 4.5 installed. Reboot xp computer before starting, to clear any existing syncs. Delete current sync profile on Trin. Connect to pc via usb as usual, let ASync run, but cancel when it tries any profile, you are left as: Guest sync
You should be connected now. Upgrade rom file should be extracted in explorer, e.g., so you can see all files. Run RUU wrapper or ROMUpgrade exe, depending on rom you're using.
If you go through process, & get error message. Don't disconnect Trinity. Close that page & start again. It should work the 2nd time. When it's working, you will see the boot screen, color bars & at bottom usb notation. (If it says serial, you'll have to, unhook usb connection, reboot computer, re-sync to guest status, & start again.) Then the update screen on Trin will show % bar, if process is working correctly.
If you still get error message, then check Trinity Wiki info as rom upgrade problem FAQ is there. I'll assume your Trin is unlocked. Check boot screen on Trin to see boot loader info. Wiki explains how.
Also: Use SSPL software Bootloader solution from "Des" - this loader ignores the CID and the upgrade will work also with wrong CID. See also http://forum.xda-developers.com/showthread.php?t=293632
If you still have problem, come back here & give info:
1. What rom is currently on Trin? What radio?
2. Did you buy an unlocked Trin? Exactly, what device do you have?
3. What wm6 rom do you want to upgrade to?

Blocked on the bootloader screen : Connection error

Hi,
I try since 3 days to update my rom with the file from HTC e-club (RUU_Trinity_HTC_FRA_1.23.406.2_103_6275_1.38.00.11_108_Ship.exe) but when I execute the file there is the bootloader (tricolor) screen with the SPL version 1.06 and nothing until there is an 'connextion error 260' on my PC screen.
I don't know how to do please help !
thanks

using vista or xp?

stevaz said:
Hi,
I try since 3 days to update my rom with the file from HTC e-club (RUU_Trinity_HTC_FRA_1.23.406.2_103_6275_1.38.00.11_108_Ship.exe) but when I execute the file there is the bootloader (tricolor) screen with the SPL version 1.06 and nothing until there is an 'connextion error 260' on my PC screen.
I don't know how to do please help !
thanks
Click to expand...
Click to collapse
try this: http://vimafeje.com/splxploit-windows.zip

I'm using XP !
racerx_ said:
using vista or xp?
Click to expand...
Click to collapse

vimafeje said:
try this: http://vimafeje.com/splxploit-windows.zip
Click to expand...
Click to collapse
I tried it but I have :
=== Trinity splxploit by pof - pof[at]eslack[.]org
=== Exploits stack overflow on HTC Trinity SPL
[] SPL file: TRIN_HardSPL.nb
\\.\\WCEUSBSH001: No such file or directory
cannot connect to \\.\\WCEUSBSH001
My ActivSync USB connection is disabled just like they ask!

hmmm... i'm not too sure about this one.. have you tried just flashing hard-spl or something while you're in bootloader screen?
also, sometimes it takes trying more than once to get splxploit to do its thing.. Is there a message with the 260 error? i can't remember which one the 260 is

I tried to install the HardSPL but still the same error : ERROR 260 : CONNECTION ERROR !!!
My usb cable is conected
racerx_ said:
hmmm... i'm not too sure about this one.. have you tried just flashing hard-spl or something while you're in bootloader screen?
also, sometimes it takes trying more than once to get splxploit to do its thing.. Is there a message with the 260 error? i can't remember which one the 260 is
Click to expand...
Click to collapse

stevaz said:
Hi,
I try since 3 days to update my rom with the file from HTC e-club (RUU_Trinity_HTC_FRA_1.23.406.2_103_6275_1.38.00.11_108_Ship.exe) but when I execute the file there is the bootloader (tricolor) screen with the SPL version 1.06 and nothing until there is an 'connextion error 260' on my PC screen.
I don't know how to do please help !
thanks
Click to expand...
Click to collapse
When there is the "connection error 260" close the upload application and try to relaunch the installing file without deconnecting your usb cable from your ppc.
Besides, in the bottom of the bootloader screen (the white part), it must be written "USB", not "Serial".

It's it was just my ActivSync driver ! I have update it and now it's working.
Thank you for your answers !

First off...what version of active sync did you update to? Second....what if the white part of my bootloader screen doesn't say "usb" or "serial"?

I have had the same issue and for some reason only Ro update issue 3.14.4.1 seems to be able to connect to my phone too...
Expolit no longer sees my phone after upgrading to Mary Rom 1.2,
Some one else on here may be able to assist with these details...
I am using vista but my xp machine is the same too

stevaz said:
I tried it but I have :
=== Trinity splxploit by pof - pof[at]eslack[.]org
=== Exploits stack overflow on HTC Trinity SPL
[] SPL file: TRIN_HardSPL.nb
\\.\\WCEUSBSH001: No such file or directory
cannot connect to \\.\\WCEUSBSH001
My ActivSync USB connection is disabled just like they ask!
Click to expand...
Click to collapse
There's a slight syntax error in the prog. Just edit the unbrick.bat file, and replace \\.\\WCEUSBSH001 at the end by \\.\WCEUSBSH001 (one less '\'). Did it today after experiencing exactly what you did, worked perfectly, now running just fine with new loader, new radio, new ROM
1) manually start in bootloader mode
2) disable USB in activeSync
3) check 'usb' appears at the bottom of the tricolor screen and that he device is recognized by XP. If not, try unplugging/repluging
4) run the corrected unbrick.bat
5) while still in (new) tricolor screen after loader update, upload a new ROM (might have to reactive USB in activesync, don't remember)
It worked just fine for me, after quite a scary day when I couldn't get anything from my device but 'connexion' errors or 'corrupted image' errors
Cheer up, everything's gonna be fine
M

christopaaron said:
First off...what version of active sync did you update to? Second....what if the white part of my bootloader screen doesn't say "usb" or "serial"?
Click to expand...
Click to collapse
Yes - no good asking the question - getting help and then not providing the final answer
Tell all - so that ALL can learn from your experience!

Hi.
I've got windows Vista, and i have the same problem. How can i solve my problem?
I already downloaded all the updated software...

Bootloader reads "Serial" and not "USB"
I am using Kamba_a 6.2 EN, and I can not flash at all my trinity. When it goes to the bootloader, reads "Serial" and then freezes. I've tried to flash the bootloader also, but always get at the end a "CONNECTION ERROR". What should I do?

rafaelegomezb said:
I am using Kamba_a 6.2 EN, and I can not flash at all my trinity. When it goes to the bootloader, reads "Serial" and then freezes. I've tried to flash the bootloader also, but always get at the end a "CONNECTION ERROR". What should I do?
Click to expand...
Click to collapse
If you have HardSPL (Olipro 1.20, Olipro 1.30 or Des' Crash Proof) installed, check this and this.

First of all, thanks for your attention. I've been going through all the related links starting from those you sent. The CID on my trinity is HTC__001, and I can't find any cooked ROM with such CID so I can flash from the miniSD. By the other hand, the white strip of my bootloader reads "Serial". Is there any way I can change that to "USB". Otherwise, all the other ROMs I'm trying are giving me the same 206 communication error.

To whom it might be useful: My bootloader was giving me only Serial connection, and I couldn't make any flash. It ended up being the USB Cable!!! The bad one let me sync, upload/download files, everything exept flashing.

rafaelegomezb said:
First of all, thanks for your attention. I've been going through all the related links starting from those you sent. The CID on my trinity is HTC__001, and I can't find any cooked ROM with such CID so I can flash from the miniSD. By the other hand, the white strip of my bootloader reads "Serial". Is there any way I can change that to "USB". Otherwise, all the other ROMs I'm trying are giving me the same 206 communication error.
Click to expand...
Click to collapse
rafaelegomezb said:
To whom it might be useful: My bootloader was giving me only Serial connection, and I couldn't make any flash. It ended up being the USB Cable!!! The bad one let me sync, upload/download files, everything exept flashing.
Click to expand...
Click to collapse
Every WWE ROM available here is HTC_001 CID. So you can flash any WWE ROM with the RUU or by SD.
As for the Serial issue, connect the Device to the PC with the USB cable an it will change to USB.
Be shure to read the Bible first!!!

htc not working
i tried to run splxploit-windows on windows vista, but there is a problem:
[]Spl file: TRIN_HardSPL.nb
\\.\WCEUSBSH001: no such file or directory
cannot connect to \\.\WCEUSBSH001
in my trinity in the red rectangle shows in white letters:
TRIN100
IPL-0.50
then in yellow letters:
Trin100
SPL-1.07.0000
The green and blue rectangles show nothing and the white shows USB.
how can i fix this
help plz...

Cant Update P4350 With Official Wm6

Ive downloaded official wm6 sve rom from HTC website. My herlald is stuck on bootloader ipl 1.08 spl 1.08. When i connect to computer usb is shown on the screen bottom ,but when i try to flash the rom ,error 300 invalid update tool is shown.
how can i fix this??
Official rom matching my p4350 is supposed to work,but it doesnt.
please help!!!

Hi there,
I recently had a similar problem as you, what I did was to:
- remove the battery for 5-10secs
- put the battery back
- press and hold the camera button (do not release it)
- press the power on button ( the one at the top of the phone, used for the soft resets)
- The phone will display three different colors and "IPL ...."
- Connect your phone via the USB cable to the computer, Windows XP detects that as a new hardware and installs the USB drivers for it. Pockect PC ...., just accept the driver installation when it warns you that the driver is not signed.
- Past all of that you should now be ready to use the Official ROM file from HTC, run the file, and go through the steps. It should start the ROM upgrade.
Well I hope it helps you as these steps did bring my phone back after a failed ROM upgrade.
Cheers

thanks for your instructions .
i will try and post results

Is your phone CID locked?
Because if so, you have to go to your phone provider and see if they have their own official rom!

I Dont Understand ,if Htc E-club Recognises My Serial Number,and Gives Me The Possibility To Download Sve Rom ,doesnt That Mean That I Should Be Able To Flash That Rom Into The Bricked Herald?

elizag said:
I Dont Understand ,if Htc E-club Recognises My Serial Number,and Gives Me The Possibility To Download Sve Rom ,doesnt That Mean That I Should Be Able To Flash That Rom Into The Bricked Herald?
Click to expand...
Click to collapse
Yes same i also have same problem i get Norway rom from my serial number but giving me invalid update tool
my phone
ipl 1.08.00001
spl 1.08.00001
please help me in that case
thanks in advance

i asked the costumer,the herald was cid unlocked when he bougt it,he flashed succesfully pdaviet ,then he wanted to flash wm6 but after uspl the p435o went into bootloader mode,ive been trying with many flashes with no result,please help!!

I had the same problem, and i did the download again. and it worked. try to download the upgrade again and dont forget to take of the memory card of the device.
I hope this can help you.

Can't flash anything to phone anymore

Hello,
I installed the latest kernel(the very last one of clemsyn of post 199) from the kaiser kernel thread and now my phone doesn't flash or even boot into ANDROID
When I try to boot into Android, the final lines are:
Install module for this kernel
apply modules/androidupdat.tgz
Failed
from sourceforge​
When I try to flash another kernel:
1. I get the tri-colour screen with the following on it:
KAIS130
SPL-3.34.0000
CPLD-8
Serial (this is written in the white part of the screen)​
2. I get the white screen past the tri-colour screen with an consistent loading.... on it. This doesn't change​
THE 1 AND THE 2 ARE DIFFERENT SD CARDS.
I flash with:
KAISDIAG.NBH from http://forum.xda-developers.com/showthread.php?t=680518
KAISIMG.NBH from different sources and the RUU_signed.nbh renamed to KAISIMG.NBH from ''Kaiser_HTC_ASIA_HK_WWE_3.34.721.2''
PLEASE HELP...

1st DO NOT DOUBLE POST.
2nd, did you install Hard SPL ?

If you want a answer to your question please change the title of the thread.
I'll edit the post with the answer after that.

http://forum.xda-developers.com/showthread.php?t=433835
For flashing windows mobile I used the above link, the link talks about using HardSPL so I suppose I have HardSPL installed, but I don't know for sure cause this was so long ago. Is there another way to check...
Also if we are able to flash kernels, isn't that to be seen the same as flashing Windows Mobile roms. If that's the case I must have hardspl installed. Because Dave Shaw says that you can't flash roms with a sd card unless you have Windows Mobile installed: http://forum.xda-developers.com/showthread.php?t=423486&page=34
DaveShaw said:
IIRC you cannot use the SD card to flash a ROM unless you have Hard SPL.
Ta
Dave
Click to expand...
Click to collapse
As a solution I tried to put Windows Mobile back, I got the update utility on the pc and the phone loading for 1% and then it would give an error: Invalid Vendor ID, anyone knows how to bypass this??
**I forced the phone into tri-colour screen mode, it was recognized by Active sync but it said to be not connected

Download the original windows mobile rom from htc site
download hard spl from tytn thread
put it in boot mode (tricolor)
flash original rom
do all steps for the new phone
flash hard spl (follow the guide in tytn thread)
flash the radio if needed
follow all the steps in atools guide
Merry Christmas!!

l1q1d said:
Download the original windows mobile rom from htc site
download hard spl from tytn thread
put it in boot mode (tricolor)
flash original rom
do all steps for the new phone
flash hard spl (follow the guide in tytn thread)
flash the radio if needed
follow all the steps in atools guide
Merry Christmas!!
Click to expand...
Click to collapse
There are a couple of problems with flashing the original rom, first I am unable to establish a active connection with active sync, one of the requirements to flash. ALSO MORE IMPORTANTLY when I flash it continues for 1% but then I get the Invalid vendor ID error and before my Android adventure this simply worked and I COULD flash the rom.
According to the HTC Kaiser wiki this can be fixed with flashing HardSpL, but when I try to do so it says error 260 the first time and error 262 the second time.

Dude, download the original rom from here:
http://www.htc.com/us/support/tilt-att/downloads/
Then switch your phone ON, holding the camera button, which will get you in a tri-color screen. Then plug the device in the USB cable with your PC. Active sync will not work. Don't worry, run the downloaded original ROM.
Then after that follow the steps from the previous post.

hom.hom said:
There are a couple of problems with flashing the original rom, first I am unable to establish a active connection with active sync, one of the requirements to flash. ALSO MORE IMPORTANTLY when I flash it continues for 1% but then I get the Invalid vendor ID error and before my Android adventure this simply worked and I COULD flash the rom.
According to the HTC Kaiser wiki this can be fixed with flashing HardSpL, but when I try to do so it says error 260 the first time and error 262 the second time.
Click to expand...
Click to collapse
Did you test with my instruction before posting?

IT WORKED!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Apparently it matters whether you use the stock version for the HTC Kaiser while having the MDA Vario III from T-Mobile, which seems to require a different rom.
THANK FOR YOUR HELP!!