Hey all,
i am searching for something special, which none of the well known kernel designers could offer. I myself cant create kernels
Here is what i am looking for:
Device: Nexus FroYo with root
Kernel features:
OC: 1.13 GHZ
UV: 800mV
Audiohack
Ramboost
Is there anyone that could create a working Kernel with the given features?
Thx a lot
Tigger
The closest one you'll find with everything you need is: http://forum.xda-developers.com/showthread.php?t=653598
It doesn't have OC but it's not necessary anyways. It has everything else you want.
mrandroid said:
The closest one you'll find with everything you need is: http://forum.xda-developers.com/showthread.php?t=653598
It doesn't have OC but it's not necessary anyways. It has everything else you want.
Click to expand...
Click to collapse
i know, but its exactly what i need. OC AND UV...thats why my request. but thanks for ur help,
im using intersectravens atm bfs .34 now...but it doesnt have OC
Froyo = pimpin'
With Froyo, you dont need OC... I thought I NEEDED it... but with SetCPU on active you'll see that the phone really only needs to run around the 245Mhz mark on the home screen and it'll rarely use all 998Mhz that it has...
RinTinTigger said:
i know, but its exactly what i need. OC AND UV...thats why my request. but thanks for ur help,
im using intersectravens atm bfs .34 now...but it doesnt have OC
Click to expand...
Click to collapse
I'd say it's a want, no so much a need, but I digress.
Wait for Ivan to update his kernel. He's been MIA though. Maybe he's dealing with real life. Look for his kernels a couple pages back and PM him. Or maybe send an email.
RinTinTigger said:
Hey all,
i am searching for something special, which none of the well known kernel designers could offer. I myself cant create kernels
Here is what i am looking for:
Device: Nexus FroYo with root
Kernel features:
OC: 1.13 GHZ
UV: 800mV
Audiohack
Ramboost
Is there anyone that could create a working Kernel with the given features?
Thx a lot
Tigger
Click to expand...
Click to collapse
I agree with not really needing OC on froyo but I guess its nice to have the option so here yah go
http://www.mediafire.com/?tzxwm0mjweo
Flash through the recovery menu or push to the phone just like you do with Raven's kernels but make sure you do a nandroid backup just in case something happens.
You didn't specify if you wanted BFS or CFS so I used CFS in this because personally I think CFS runs better overall on froyo.
(Although BFS really makes the launcher super silky smooth, it really chugs when I try to load Flash content in the browser but maybe this is happening to me only, I don't know )
wildmonks said:
I agree with not really needing OC on froyo but I guess its nice to have the option so here yah go
http://www.mediafire.com/?tzxwm0mjweo
Flash through the recovery menu or push to the phone just like you do with Raven's kernels but make sure you do a nandroid backup just in case something happens.
You didn't specify if you wanted BFS or CFS so I used CFS in this because personally I think CFS runs better overall on froyo.
(Although BFS really makes the launcher super silky smooth, it really chugs when I try to load Flash content in the browser but maybe this is happening to me only, I don't know )
Click to expand...
Click to collapse
But this oine is 950mV ...i wanted 800mV for better Battery!
RinTinTigger said:
But this oine is 950mV ...i wanted 800mV for better Battery!
Click to expand...
Click to collapse
beggers cant be choosers
xXJay_RXx said:
beggers cant be choosers
Click to expand...
Click to collapse
But its why i opened the Thread. Im not to dumb to find the pershoot with 950mV...but i am requesting something different.
And it might be that requesters wont get what they ask for but for me, its totally worth a try!!!
RinTinTigger said:
But this oine is 950mV ...i wanted 800mV for better Battery!
Click to expand...
Click to collapse
Oops.. sorry about that... I uploaded the wrong one... here yah go:
http://www.mediafire.com/?xni3mduojj3
wildmonks said:
Oops.. sorry about that... I uploaded the wrong one... here yah go:
http://www.mediafire.com/?xni3mduojj3
Click to expand...
Click to collapse
Testing it...who made it?
Does it have audi and ram boost?
RinTinTigger said:
Testing it...who made it?
Does it have audi and ram boost?
Click to expand...
Click to collapse
No, BMW but they're both German so you're okay...
djmcnz said:
No, BMW but they're both German so you're okay...
Click to expand...
Click to collapse
I thought the same thing too when I read "audi"
RinTinTigger said:
Testing it...who made it?
Does it have audi and ram boost?
Click to expand...
Click to collapse
I compiled it using the code that Raven publicly provides on his Github (latest as of 5/27/2010) and i added the overclocking code that you requested.
http://github.com/intersectRaven/ir-kernel-2.6.34/commits/master/
So it has everything that Raven's kernel has like the audio boost, 21MB ram, optimization flags, etc.
I decided to give this a try. Running great so far. Not sure if it's just a placebo effect, but it definitely feels snappier with that added .1 ghz.
halorin said:
I decided to give this a try. Running great so far. Not sure if it's just a placebo effect, but it definitely feels snappier with that added .1 ghz.
Click to expand...
Click to collapse
Nice, glad to hear it working out well so far for someone. Yah, after testing this out for a day I notice the same thing, a little more responsive, linpack has increased from 36ish to around 40 and flash heavy sites load quicker.
I'll probably use this kernel in my phone now for everyday use but use SetCPU to keep it at 998MHz until I need that little extra boost.
(Reason being because in order to run at 1113MHz the AVS has to boost the voltage up even higher then usual to keep it stable.)
Hm. Didn't know that, the voltage. Thanks.
RinTinTigger said:
But this oine is 950mV ...i wanted 800mV for better Battery!
Click to expand...
Click to collapse
Ummm... didn't we test this out in some huge blind test of kernels and conclude that 950 gets better battery life than 800?
pjcforpres said:
Ummm... didn't we test this out in some huge blind test of kernels and conclude that 950 gets better battery life than 800?
Click to expand...
Click to collapse
I guess there are those few who see better battery life when using 800 .
Personally I use 950 because 800 makes my radio erratically switch between 2G and 3G in my workplace which in turn causes a big drain on my battery. This doesn't occur when I'm home though, probably because I'm so close to a cell tower.
wildmonks said:
I thought the same thing too when I read "audi"
I compiled it using the code that Raven publicly provides on his Github (latest as of 5/27/2010) and i added the overclocking code that you requested.
http://github.com/intersectRaven/ir-kernel-2.6.34/commits/master/
So it has everything that Raven's kernel has like the audio boost, 21MB ram, optimization flags, etc.
Click to expand...
Click to collapse
THANKS a LOT! Its working really good.
And to thos with the 950>800 opinion, i thought this at well, but, i testet so much kernels now, with my usage parameters and it worked better with an 800mV
Wildmonky, any chance you could also make an BFS Version?
I think you should give both kernels then to raven to add em to his repo! They are GREAT!
I was so much looking for this kernel!!!
THX a lot!
Tigger
RinTinTigger said:
THANKS a LOT! Its working really good.
And to thos with the 950>800 opinion, i thought this at well, but, i testet so much kernels now, with my usage parameters and it worked better with an 800mV
Wildmonky, any chance you could also make an BFS Version?
I think you should give both kernels then to raven to add em to his repo! They are GREAT!
I was so much looking for this kernel!!!
THX a lot!
Tigger
Click to expand...
Click to collapse
No problem Tigger
Here yah go. Still no changes from Raven for kernel version 34 so its still dated 05/27/2010 to match.
2.6.34_AVS-800mV_BFS_1113Mhz_052710:
http://www.mediafire.com/?j2kmytmhqjm
Raven really hates overclocking so this will never be in his repo. But what I might end up doing is compile and upload to mediafire when a new update is out, if there is enough interest in this.
Related
I have setcpu installed on my Nexus One, along with the Zimage and lib files I need to overclock it. Can anyone tell me what an appropriate temperature range is for the Nexus, as would be shown in the SetCPU widget? I want to be sure I don't cause my Nexus to overheat.
Around 21-36 for me.. highest it ever got was 40.3 degrees.
crawler9 said:
I have setcpu installed on my Nexus One, along with the Zimage and lib files I need to overclock it. Can anyone tell me what an appropriate temperature range is for the Nexus, as would be shown in the SetCPU widget? I want to be sure I don't cause my Nexus to overheat.
Click to expand...
Click to collapse
rjhay22 said:
Around 21-36 for me.. highest it ever got was 40.3 degrees.
Click to expand...
Click to collapse
Is that in Celcius or Fahrenheit?
i would hope its in Celsius, or it would mean that the CPU is cold enough to freeze water
Alright thanks mines been on average about 99 degrees Fahrenheit
that's what I get when I'm charging my phone, so that's pretty high if that's what you have on standby.
crawler9 said:
Alright thanks mines been on average about 99 degrees Fahrenheit
Click to expand...
Click to collapse
Would it matter if I have a silicon case on it? And how high is dangerously high?
I have the same case, I wouldn't want it to go over 40C or bout 102 F. Thats pretty hot, I notice my phone gets sluggish and starts forceclosing too... What ROM are you running? And are you using OC-UV kernel? If not I suggest you get it.
crawler9 said:
Would it matter if I have a silicon case on it? And how high is dangerously high?
Click to expand...
Click to collapse
rjhay22 said:
I have the same case, I wouldn't want it to go over 40C or bout 102 F. Thats pretty hot, I notice my phone gets sluggish and starts forceclosing too... What ROM are you running? And are you using OC-UV kernel? If not I suggest you get it.
Click to expand...
Click to collapse
At the time I had SetCPU and was overclocked, I had Cyanogen's latest stable ROM (5.0.5.3?) installed. I was using the UV kernel. Last night I switched to Alpha r20 of MoDaCo's desire ROM for Nexus along with whatever kernel that comes packaged with.
You should be able to flash the OC-UV kernel by pershoot over Modacos desire ROM.
Battery life means more than OCing to me so here's my SetCPU profile settings if it helps.
Default setting: 998/245
Charging: 844/245
Standby: 245/245
Power<35%: 883/245
Failsafe batt > 40: 729/245
I should add that I'm charging right now, music player on, using my phone non stop and my batt temp is 95F.
crawler9 said:
At the time I had SetCPU and was overclocked, I had Cyanogen's latest stable ROM (5.0.5.3?) installed. I was using the UV kernel. Last night I switched to Alpha r20 of MoDaCo's desire ROM for Nexus along with whatever kernel that comes packaged with.
Click to expand...
Click to collapse
rjhay22 said:
You should be able to flash the OC-UV kernel by pershoot over Modacos desire ROM.
Battery life means more than OCing to me so here's my SetCPU profile settings if it helps.
Default setting: 998/245
Charging: 844/245
Standby: 245/245
Power<35%: 883/245
Failsafe batt > 40: 729/245
I should add that I'm charging right now, music player on, using my phone non stop and my batt temp is 95F.
Click to expand...
Click to collapse
Sounds like a good profile, and I think I'll try that myself and see where my temperature lies with those settings. Just curious... what are the advantages of using the OC-UV without overclocking?
Here's information on the kernel with the ROM I'm using, directly copied from the page with the ROMs.
What kernel are you using? Any other tweaks worth knowing about?
The ROM has the usual MCR tweaks (tun.ko, openvpn, busybox, dropbear etc.) and is running a custom kernel by teknologist and myself based on the stock .33 source (check the changelog below for more details). Himem is enabled. The kernel runs at standard clock speeds, uniquely only using undervolt at the lowest clock speeds.
Good question, I had an option to just undervolt it, there is a UV @stock speed kernel by Persianone too, but I opt to get the OC-UV just incase I need to show off how fast my N1 is. LOL. Better to have the option to use it when i need it.
crawler9 said:
Sounds like a good profile, and I think I'll try that myself and see where my temperature lies with those settings. Just curious... what are the advantages of using the OC-UV without overclocking?
Here's information on the kernel with the ROM I'm using, directly copied from the page with the ROMs.
What kernel are you using? Any other tweaks worth knowing about?
The ROM has the usual MCR tweaks (tun.ko, openvpn, busybox, dropbear etc.) and is running a custom kernel by teknologist and myself based on the stock .33 source (check the changelog below for more details). Himem is enabled. The kernel runs at standard clock speeds, uniquely only using undervolt at the lowest clock speeds.
Click to expand...
Click to collapse
rjhay22 said:
Good question, I had an option to just undervolt it, there is a UV @stock speed kernel by Persianone too, but I opt to get the OC-UV just incase I need to show off how fast my N1 is. LOL. Better to have the option to use it when i need it.
Click to expand...
Click to collapse
Alright thanks for all the help.
My pleasure
crawler9 said:
Alright thanks for all the help.
Click to expand...
Click to collapse
Hey folks,
It was requested of me to make a thread regarding this. I have compiled an alternative kernel for aosp based roms. It should work with any of them.
1.0
All governors enabled, interactive patched in, conservative as default
Anticipatory scheduler vs. deadline ins stock cm6
Supports wired tethering
Latest source (may be newer than cm6?)
tun.ko support for vpn
More will be added later.
Thank you Koush, for providing me the fix for screen tearing and thanks sniffle, for helping me with making the kernel work with aosp
http://adrynalyne.us/files/kernels/cm6_ruby/
Source:
http://adrynalyne.us/files/kernels/cm6_ruby/source/
Nice job buddy! Thank you! I'll give it a shot tonight.
Sent from my ADR6300 using XDA App
oh hell yea.
maybe this will help all us aosp guys get a stable phone to use...
Just loaded it up. Will be back. To report.
Sent from my ADR6300 using XDA App
dnoyeb said:
oh hell yea.
maybe this will help all us aosp guys get a stable phone to use...
Click to expand...
Click to collapse
Thats the plan
Any plans to get undervolt and oc?
Trying now, thanks...
Is there a place I can find the Stock CM6 kernal, in case I don't like this one? Ill report back in a little bit
Its slower than the CM6 kernal. I ran a linpack of 27 and quadrant of 1277. This was both running "performance" mode, and turning set cpu to the max which was 1000. I Am going to give it a try, maybe the battery life will make up for the performance loss. If not, nandroid here I come.
bradm23 said:
Trying now, thanks...
Is there a place I can find the Stock CM6 kernal, in case I don't like this one? Ill report back in a little bit
Click to expand...
Click to collapse
ditto request backup stock cm6 kernel
I just hope it fixes my WiFi shutting off constantly.
Seems to be really solid, a bit slower than cm-6 but also took care my screen flicker and haven't found any negatives yet (1.0+ hr up time) . Looking forward to some overclock variations. Thanks for the work adrynalyne.
bradm23 said:
Its slower than the CM6 kernal. I ran a linpack of 27 and quadrant of 1277. This was both running "performance" mode, and turning set cpu to the max which was 1000. I Am going to give it a try, maybe the battery life will make up for the performance loss. If not, nandroid here I come.
Click to expand...
Click to collapse
Not sure what to tell you. The Sense version of this kernel has considerably better than that.
adrynalyne said:
Not sure what to tell you. The Sense version of this kernel has considerably better than that.
Click to expand...
Click to collapse
I wasn't complaining. I will take a slightly slower kernal thats rock solid and great battery, vs a quicker but less stable.. sorry I came off like i was complaining. I really appreciate all your hard work, thanks.
bradm23 said:
I wasn't complaining. I will take a slightly slower kernal thats rock solid and great battery, vs a quicker but less stable.. sorry I came off like i was complaining. I really appreciate all your hard work, thanks.
Click to expand...
Click to collapse
Oh I didn't take it as such.
I just don't know why
Unless the scheduler differences are doing it. Its possible.
Did you say that the top speed showed 1000 in setcpu vs. 998400?
unstable for me on 9/10 nightly wifi on and no setcpu, 3 random lockups/reboots in past 2 hrs
32.61 linpack and 1341 quadrant. Its not much slower than cm-6. @adrynalyn, do you plan on bumping up the clock speeds? Mine is showing 1000 max btw. Thanks again
I wasn't complaining. I will take a slightly slower kernal thats rock solid and great battery, vs a quicker but less stable.. sorry I came off like i was complaining. I really appreciate all your hard work, thanks.
Click to expand...
Click to collapse
Oh I didn't take it as such.
I just don't know why
Unless the scheduler differences are doing it. Its possible.
Did you say that the top speed showed 1000 in setcpu vs. 998400?
Click to expand...
Click to collapse
It shows 1k for me too
Yeah I plan on some future bumps.
THANK YOU ADRYNALYNE!!!!!!!!!! I was so pumped when you told me you did this .
adrynalyne said:
Oh I didn't take it as such.
I just don't know why
Unless the scheduler differences are doing it. Its possible.
Did you say that the top speed showed 1000 in setcpu vs. 998400?
Click to expand...
Click to collapse
1k max for me as well. 998 didn't seem to be an option.
I'm getting similar performance as I get with kernels i compiled from koush's source where i only changed cpu speeds for overclocking and udervolting. Not as fast as koush's even when i bumped it up to 1.19Ghz. Which i couldn't figure out why since i used exact same source
12/08/2011
Added an ICS branch.
08/15/2011
Support for voice call recording.
Adjusted voltage range to 700min 1375max. Good luck have fun.
07/06/2011
Fast charge USB
Patch to increase performance of a function often used in the kernel (memcpy)
http://www.incredikernel.com
If you would like incredikernel to keep improving, please turn off adblock for the domain. It is greatly appreciated.
06/27/2011
Fix for devices that use newer touch controllers
Read this: http://forum.xda-developers.com/showpost.php?p=15132827&postcount=3626
Get it at http://www.incredikernel.com
06/19/2011
2.6.38.8
Everything from the 4/19 release
A bunch of changes to fix smartass (I think finally)
Simple sysfs interface to enable/disable audio boost
http://www.incredikernel.com
12/23/2010 - Sense
incrediblec-MR3-2.6.32-g9a2fc16 base
Patched up to 2.6.32.27
OC up to 1.1136ghz
Screen on minimum 245mhz
Screen off 128/384
HAVS/UV
Improved smartass scaling (likes lower frequencies more) - default
BFQ I/O scheduler
Tiny RCU
CFS scheduler tweaks
GPU+
SD card speed fix
TUN + CIFS modules
ext4
Updated yaffs2/atmel touch/wifi
3/5 Multitouch support - NOTE: Some devices only support 2 touches
http://www.incredikernel.com
Use the +25v zip if you have stability issues
I recommend you don't change governors and don't set any profiles. Let smartass do its thing as it takes care of sleep.
If multitouch is not working, you may be able to get it to work by following this:
http://forum.xda-developers.com/showpost.php?p=10231055&postcount=1104
InrediControl:
https://play.google.com/store/apps/details?id=com.incredicontrol
IncrediControl AdFree key:
https://play.google.com/store/apps/details?id=com.incredicontrolAF
Fastcharge widget:
https://play.google.com/store/apps/details?id=com.incredicontrol.fastchargewidget
Because of many requests to add this:
chad0989 said:
Since I haven't seen a kernel from the latest HTC source I decided to cook one up. Scored 1529 on quadrant vs a best of 1306 with the stock HTC source. No overclocking or undervolting. May toy with that later.
incrediblec-MR3-2.6.32-g9a2fc16 base
BFS318 task scheduler
BFQ I/O schedular
GPU+
SD card speed fix
All cpu governors enabled
Screen off set minimum 245 max 384
http://www.multiupload.com/4X1BETLBZ0
Enjoy
Click to expand...
Click to collapse
looks nice, would you mind if i included this in my rom?
Can you mod a kernel for cm6
Its already made just add more features? ????
Sent from my ADR6300 using XDA App
I would imagine there's a few guys working on this? Good work getting it out first.
Gonna give it a go!
Question, is the original kernel BFS or did you add that in? Just curious as I really like the UI smoothness of the stock .17 and I have absolutely 0 knowledge of linux besides what i've picked up from reading xda.
Thanks so much for cookin this up, smells good!
scottylove said:
Question, is the original kernel BFS or did you add that in? Just curious as I really like the UI smoothness of the stock .17 and I have absolutely 0 knowledge of linux besides what i've picked up from reading xda.
Thanks so much for cookin this up, smells good!
Click to expand...
Click to collapse
lol htc wouldnt cook in the bfs scheduler
chad,
would you actually mnd whipping up a cfs version? i find that cfs is much more stable than bfs
sweet dling now ...ty
edit- holy benchmarks!
Sent from my ADR6300 using XDA App
Thanks Chad! Just flashed it.
I just flashed it. What is GPU+ anyway?
DopeShiziot said:
looks nice, would you mind if i included this in my rom?
Click to expand...
Click to collapse
Go for it.
DopeShiziot said:
chad,
would you actually mnd whipping up a cfs version? i find that cfs is much more stable than bfs
Click to expand...
Click to collapse
Did you have issues with this kernel? BFS really should be better suited for phones where a smooth UI is important.
Here's a little reading material:
http://www.google.com/url?sa=t&sour...qsCyDw&usg=AFQjCNG7ORB_chlUiype8OJZES-5bHzSjA
alexdeluxe said:
I just flashed it. What is GPU+ anyway?
Click to expand...
Click to collapse
Its a patch for sense kernels that increases 2d and 3d performance.
http://forum.xda-developers.com/showthread.php?t=825304
chad0989 said:
Go for it.
Did you have issues with this kernel? BFS really should be better suited for phones where a smooth UI is important.
Here's a little reading material:
http://www.google.com/url?sa=t&sour...qsCyDw&usg=AFQjCNG7ORB_chlUiype8OJZES-5bHzSjA
Click to expand...
Click to collapse
thanks!
and no, i havent had issues, but in the past ive found cfs to be much more stable and reliable.
Make this for aosp please. Ziggy stopped doing them, King's had some issues, and Koush's test doesn't have all the governors enabled.
Source needed
Please post or link your source changes. It is required under the GPL. Thanks for your cooperation.
overground said:
Please post or link your source changes. It is required under the GPL. Thanks for your cooperation.
Click to expand...
Click to collapse
is that by chance why the kings kernels were removed? j/w
DopeShiziot said:
is that by chance why the kings kernels were removed? j/w
Click to expand...
Click to collapse
You guessed it.
overground said:
Please post or link your source changes. It is required under the GPL. Thanks for your cooperation.
Click to expand...
Click to collapse
There you go.
i wonder why when i ask any if its possible for cm6
i always get ignored????
anybody have good resullts? battery life? about to flash, just curious?
thanks
DS36 said:
i wonder why when i ask any if its possible for cm6
i always get ignored????
Click to expand...
Click to collapse
What did you need done?
WARNING: This contains an OVERCLOCKED kernel. Here it the link for version 2.
http://www.megaupload.com/?d=F3FMTK5M
Please use PimpmyCPU to undervolt the Tegra CPU by downloading the latest version here
http://forum.xda-developers.com/showthread.php?t=1018411
LMK of any issues. Thanks.
BTW here are the Overclocked Components of the kernel
CPU = 1500mhz (default = 1000mhz)
System/Avp/vde BUS= 266400 (default = 240000)
GPU = 400mhz (default = 300)
BTW, if you like my work, pls buy me a BEER
Clemsyn, thanks for your efforts. any chance of getting your Kernel for Adam CM7?
Well...
...what can I say. It´s freakin' fast! Very quick touch respons. 1500MHz does not seem to be a problem. I was not able to find the specific gorvenor you mention.
Only issue I´ve run into is the auto-rotate. When it rotate to portrait it won´t rotate back to landscape mode. Changing cpu freq. did not help. Actually it seems the sensor does not work, as it only rotate if an app forces it to change mode.
As for beer - alcohol is no good mate! Sorry.
I got a Quadrant score saying 3273, a number My adam has never reach before.
Everything is fast and has a quick and stable responsiveness and surfing the internet is a bless. I would love the HC to have these qualities, maybe you could join the team? Maybe you already are on the team
The 1.5GHz overclock is doing a nice job and there has been no issues.
Still an issue, the sensor to rotate screen.
Am I talking to myself?...
So PimpMyGtab is here: http://forum.xda-developers.com/showthread.php?t=895825
And with Data2Loop on the Quadrant score is 4384...!!
Meekos, chould you check video, especially 720p or even 1080p that didn't work well with standard kernel?
Thanks in advance.
Raul^ said:
Meekos, chould you check video, especially 720p or even 1080p that didn't work well with standard kernel?
Thanks in advance.
Click to expand...
Click to collapse
It works. If you mean playback. 1080p with a little stutter though...
Thank you kindly
Meekos said:
So PimpMyGtab is here: http://forum.xda-developers.com/showthread.php?t=895825
And with Data2Loop on the Quadrant score is 4384...!!
Click to expand...
Click to collapse
Meekos,
I am currently trying to OC Adam's kernel but with no device at the moment, it's kinda difficult (but could be done). I built a new kernel (which will break wifi but needed to fix the accelorometer, I think). Here is the link, LMK how it goes
https://rapidshare.com/files/129862817/update.zip
BTW, THIS IS ONLY FOR MEEKOS TO DOWNLOAD.
Meekos said:
As for beer - alcohol is no good mate! Sorry.
Click to expand...
Click to collapse
As long as you drink responsibly and do it in moderation, it is OK
Fc. In some apps... also issue in rotation... I just disabled it.
Sent from my SGH-T959 using XDA Premium App
clemsyn said:
Meekos,
I am currently trying to OC Adam's kernel but with no device at the moment, it's kinda difficult (but could be done). I built a new kernel (which will break wifi but needed to fix the accelorometer, I think). Here is the link, LMK how it goes
https://rapidshare.com/files/129862817/update.zip
BTW, THIS IS ONLY FOR MEEKOS TO DOWNLOAD.
Click to expand...
Click to collapse
Thanks Clemsyn, I´ll try it as soon as I have my adam up and runnning again. I tried out the HC beta and it seems the recovery mode is not acessable any longer...Should have stayed with your version
clemsyn said:
As long as you drink responsibly and do it in moderation, it is OK
Click to expand...
Click to collapse
You are absolutely right. I just don´t want you to become less brainy because of alcohol that I have sponsored. A bio organic smoothie maybe?
great ROM!
Thank you so much for that rom.
It makes my Adam just the best tablet out there.
The speed is phenomenal...
OC 1500 UC 1150. Under 1150 it is too unstable.
But again what a speed!!
Battery is affected but well i haad like 4-5 hours with a full charge and left it at about 12 %...
WIFI Ok 3G Ok all ok!!
you are a star!!!
i own you a Smoothie then
Best
oooppp GPS not working
cedricj said:
Thank you so much for that rom.
It makes my Adam just the best tablet out there.
The speed is phenomenal...
OC 1500 UC 1150. Under 1150 it is too unstable.
But again what a speed!!
Battery is affected but well i haad like 4-5 hours with a full charge and left it at about 12 %...
WIFI Ok 3G Ok all ok!!
you are a star!!!
i own you a Smoothie then
Best
Click to expand...
Click to collapse
For some reason my GPS is not working... But orientation does...
So you know...
VERSION 3
Beasty 2.2.1+Clemsyn kernel combo 1.5 ver3
WARNING: This contains an OVERCLOCKED kernel. Here it the link for version 3
http://www.megaupload.com/?d=H2XD0DY7
from this thread
cedricj said:
For some reason my GPS is not working... But orientation does...
So you know...
Click to expand...
Click to collapse
You actually got it working before? ive never been able to get a lock since i got my adam..(No matter what rom)
Quick Video of power settings and response
If you want to see a quick video of it working and tips for the clock settings check out my video
no6969el said:
You actually got it working before? ive never been able to get a lock since i got my adam..(No matter what rom)
Click to expand...
Click to collapse
Well i have to agree here. i made it to work but never more than minutes...
with this rom (not try version 3) it does not work at all...
cedricj said:
Well i have to agree here. i made it to work but never more than minutes...
with this rom (not try version 3) it does not work at all...
Click to expand...
Click to collapse
(not tried version 3)...
load of apps not showing in portrait either but i blame the tablet/kernel...
Big thanks to my friend who upgraded his phone and gave me his Atrix. BIG THANKS to my wife for giving me a quad-core CPU to upgrade our desktop (after I replaced the starter and alternator of her car) and also allowing me some time off from the kids to give me some time to build this combo. Big thanks to Blades, pershoot, koush, faux123, cyanogen, the whole Atrix-dev team and the Cyanomodgen Team, and other devs whom I might have missed , to all users of Gtabs, Transformer and Atrix for testing out my work and giving back their precious input.
WARNING: ONLY FOR ELITE TEGRAS!!!
To find out if you have an elite tegra, please flash my Elite kernel on this link
http://forum.xda-developers.com/showthread.php?t=1354502
and see if you can boot your atrix and it works. If my kernel don't boot, then this combo is not for you.
Updated: 1/30/2012
1. Added some OpenGL changes in the ROM
2. Added memory tweaks in the kernel
Here is the link
http://www.tunerspotter.com/clemsyn/ClemsynCyanogenEGLCombo1.5.zip
BTW, Please
here and help me buy some diapers
---------------------------------------------
---------------------------------------------
UPDATE: 1/28/2012
Changes:
1. Played with some voltages making changes within Nvidia requirements
2. Increased overclock to 1.5 ghz (YAY!!! It's going to be pretty hot in there)
3. Increased audio bitrate for HD 1080p (since the older one had a lower bitrate)
LINK
http://www.tunerspotter.com/clemsyn/Clemsyn1.5cyanoElite.zip
BTW, I would like your opinion in HD 1080p recording. Thanks.
----------------------------------------------------------
----------------------------------------------------------
Changes:
1. ROM changes made to optimize overclock settings. This ROM will have a maximum speed of 1.4 ghz without the use of overclocking apps. If you wish to undervolt, then you can use PimpCPU, SetCPU, CPUMaster, System Tuner and etc....
2. Modifited bitrate and FPS for 1080p video recording for better result (IMHO but your input on this will be greatly appreciated)
3. The rest is regular Cyanogen gingerbread with fingerprint mods by the dev team
Your input will be appreciated
BTW, if you like my work, please click on the donations button under my signature or
and it will be appreciated. Thanks.
Here is the link
http://www.tunerspotter.com/clemsyn/ClemsynEliteCyanoCombo.zip
BTW, I would like input on HD 1080p video recording...Thanks.
Sources:
Atrix dev team github
faux kernel github
Cyanogenmod github
Now I have to try building Cyano for the Gtabs
Reserved....
Glad to see you here. I am one of the few who had boot problems with your other kernel.... but I'm still gonna try flashing this one.
I keep a backup of my current kernel on my ext-sdcard, so I'm not worried.
Do you know what what causing the issues with some phones not booting on your kernels? I can't remember what the problem was. Is it possible to fix?
Swiftks said:
Glad to see you here. I am one of the few who had boot problems with your other kernel.... but I'm still gonna try flashing this one.
I keep a backup of my current kernel on my ext-sdcard, so I'm not worried.
Do you know what what causing the issues with some phones not booting on your kernels? I can't remember what the problem was. Is it possible to fix?
Click to expand...
Click to collapse
It's the same kernel so it will not boot Didn't have time to play with the kernel because I was excited in compiling cyanogen mod in my new quad core which compiled in 23 minutes (last time I tried it on my laptop which was a core duo, it took me 7 hours).
It could be a couple of reasons.
1. GPU, AVP etc where overclocked
2. Memory timings where pretty aggresive
Exact same kernel? No changes to it? (Like patching to .53 from .48)
Notorious544d said:
Exact same kernel? No changes to it? (Like patching to .53 from .48)
Click to expand...
Click to collapse
Not yet but might soon, if time permits...building one for Gtab at the moment
clemsyn said:
Not yet but might soon, if time permits...building one for Gtab at the moment
Click to expand...
Click to collapse
Out of curiosity... do you own the Atrix now?
Notorious544d said:
Out of curiosity... do you own the Atrix now?
Click to expand...
Click to collapse
Yes (need to put more characters to post )
Any chance of getting voodoo to work on the atrix like with our transformers?
Sent from my Transformer TF101 using Tapatalk
That are some of the uv options in mv, on the faux kernel I can get the 216mhz down to 300MV so I was just wondering what I can expect from UV kernel with elite.
swyped from att gsii
Flashed this rom after using the CM9 port for a few days and missing my cam and LED flashlight. So far this is fast and no issues. I was a huge fan of the kernal and now I am a fan of the rom. Keep up the good work.
Sent from my cm_tenderloin using Tapatalk
All good here also. I am anxious to how battery life is.
OMG OMG!!!! Huge fan of your work and glad you now have Atrix
Your att kernel works for me, but cm7 however, doesn't
What exactly is a "elite tegra" :X
Battery use update:
9% drain overnight (8 hours) using a SetCPU screen off profile set to 416 max.
justflorin said:
That are some of the uv options in mv, on the faux kernel I can get the 216mhz down to 300MV so I was just wondering what I can expect from UV kernel with elite.
Click to expand...
Click to collapse
Obey the 100mv/step rule.
Feel like a NOOB
I was under the assumption that this was a combo and would work for either Cyanogen or a Gingerbread ROM but i can not get it to work with Wet Dream. However the ClemsynATT1.4elite works flawless.
rozzco said:
Battery use update:
9% drain overnight (8 hours) using a SetCPU screen off profile set to 416 max.
Click to expand...
Click to collapse
What is your wifi setting or 3g setting at? on all the time or just completely off ?? sleep policy?
mapobean said:
I was under the assumption that this was a combo and would work for either Cyanogen or a Gingerbread ROM but i can not get it to work with Wet Dream. However the ClemsynATT1.4elite works flawless.
Click to expand...
Click to collapse
This is a combo. Rom and Kernel. LOL.