Hi,
I have tried several ROMs, all of them work just fine until (after a period of time that may range from hours to days) and when I soft-reset my device, it acts like if I hard-reset it; goes through the setup, contacts gone.. etc. Anybody?
I do flash ROMs following the the steps in the related threads.
I've tried to search threads for anything like this, but I couldn't find any. (I hope I didn't miss any post, I know how annoying it would be for more to ask for something that was asked before).
Ah, and this is my first post! I'd like to thank all the devs for their outstanding work.
Thanks.
How do you reset the device from the back of the phone or from the software.
If you do it from the back of the phone, it should only do a saft reset not eraase anything.
If you do it using software on the phone, It maybe written to do a hard reset, I advise to check with the maker of the software or ROM what type of reset it is suppose to do.
Related
I know this is my first post here but I've done my best to search the forums and I haven't found anything that looks like it helps me.
I just got my AT&T Tilt yesterday. It came unlocked (I'm using it with T-Mobile) and has an HTC ROM installed as well as various other apps (Ms. Pacman, TomTom 6, SuperDoku, etc.). I had some issues with it locking up yesterday (similar to what I'm experiencing now but to a much, much lesser degree) when I was playing around with it but those issues somehow corrected themselves.
This morning I installed the Tilt keyboard fix that TaurusBullba posted on here back in June to fix some mapping issues. Since I installed and soft reseted, everything has been going kinda haywire. The Wi-Fi turned itself off and I can't turn it back on. When I slide out the keyboard the orientation stays in portrait mode. When I try to shut down the phone using the power button it hangs forever. Now, actually, half the time I press the power button nothing happens at all.
I've tried uninstalling the CAB but that didn't fix anything at all. I'm afraid to try a hard reset because, from my understanding, I'm going to lose everything that came pre-installed on my phone for me. I should probably also add that last night I installed the Google Maps CAB with no problems whatsoever. Is there some simple solution I'm overlooking? Thanks much!
I would advise that if you have tried soft resets to try and resolve the issues and it hasn't worked, then perhaps a hard reset?
It sounds as if the software you have installed as either caused the problems or exacberated them (ie made them worse).
With hard reset it wipes everything back to when you got it. If you are able I would suggest that you plug it into the computer and make sure ActiveSync backups up your contents. You may also want to use this get all the files on the main memory either to the storage card or to you're PC.
As this is yo're first post I don't know how au fait you are with the above that I have mentioned
The preloaded apps will be reloaded again. You won't have an empty ROM if you do a hard reset. It will be as if you just flashed the ROM again.
Thanks for the replies guys. I went ahead and did a hard reset and it looks like the only thing I lost (or at least the only thing I miss) was TomTom. I've already reinstalled that using a link I found on here, and everything seems to be good to go.
I still have no idea what might have caused the problems though, so I'm afraid that they might come back or I might repeat some dumb mistake I made. I guess I'll just have to live with that for now.
clear storage / hard resets no big deal, just expect to do it every other week while you're finding all the cabs that work (or dont work) for you..
I generally clear storaged every week when i first got my tilt until I found all the app's I liked that didn't have side effects
I've finally decided it's that time, Developers.
I really have no clue what I'm doing. I'm not well-versed with the inner mechanics of computer technology, or "flashing roms," or "cooking." Honestly, I just follow instructions very well.
With that said, I've flashed several roms from this site. My first was one of itje's, and it worked great. When I finally decided to try new ones and flashed the Open Touch line, it started to give me a hassle (now this isn't to say Open Touch is to blame, because I tried other one's after that, too).
Every time I flash a new rom, now, I'll put it on the device and say "this is incredible." I'll begin to customize it to my liking, manipulating the device settings and the such. Somewhere along the road, I'll say "time to soft reset!" At that point, the device will successfully power off, and power on. Then, the WM Loader screen appears, and stays right there. I've used a couple of troubleshooting techniques to figure out why, but I honestly have no clue what to look for. Hopefully, you do:
> This usually happens once I've FINISHED customizing it. I suspect (for some reason) it has to do with Windows Live Messenger.
> It also might be the "battery indicator" that I throw on the Today Screen.
> I STILL have no clue what "Hibernate" means, but I do it regularly because it seems to help.
> Soft resetting it again won't work. I actually need to use the hardware buttons to reset the device from factory defaults in order to make it run again (and of course it's no longer customized).
> Currently, I'm running the: Open Touch v2.7
In closing: If this is in the wrong sub-forum, I apologize. Please move it, and I'll know for next time. I didn't even really want to make this thread because I obviously sound like an idiot who doesn't belong holding a Wing. Hopefully one of you has an answer that will make some sense to me, because at this point I'm almost confused enough to digress back to a Samsung Blast.
are you overclocking it with battery status? if so try overclocking to 260mhz not 273mhz or even 243mhz.
I hope that helps.
You see, that's the problem. I don't even know what the heck "overclocking" means. All I know is it said "Be careful with this!" so I didn't even touch it.
Thanks for trying, though.
On wizard forum there were alot of people having trouble with "badflash" - I don´t even know what it is.
BUT before flashing a new rom they flash a stock rom!
AND they confrim a hardreset after flashing...
Maybe this helps
have you tried to flash then soft reset prior to cutomising the device? If it is OK it would point to something you are doing with your customisations, if not then I would look into what papamopps said.
if it is something you are doing then change one thing at a time and soft reset, eventually you will narrow it down to whatever you are doing that is causing this.
i know alot of you all dont want me to start a new thread but my phone is acting crazy and i need help ASAP its giving me plenty of problems but only going to ask to help a couple....
1.) i installed psShutXP Power key on my phone and it worked great and actually still does but after it has been on my phone my phone will soft reset at any given moment(mainly when im on a phone call)...i have uninstalled and installed to see if that was the problem and unistalled again and still no fix please help on this problem first
2.) sometimes when i hit my power key to wake up the phone from sleep mode it gives me either an all black screen or an all white screen so i will have to put it back to sleep and try 2 or 3 times
P.S. i own the htc fuze from at&t in the US and same ROM as it came with...PLEASE help and dont flame and i will not add another thread of this kind again
No worries friend. This site is here to help.
Your best bet is to try a hard reset. This will wipe the device and set it back to factory fresh state. Just like you took it our of the box.
The downside to this is all of your data and programs in memory will be wiped out. The SD card will be fine, but to be safe, remove it befre you hard reset.
To hard reset, do the following:
1. turn the device off.
2. press and hold the volume down and Enter Button (round one on front)
3. Soft reset and keep holding down volume.
4. follow instructions on the screen.
Since you are faced with this, you may want to try flashing a new ROM or deleting some of the ATT "bloat" that comes pre installed. Check here for new ROM advice. Check here for a lighter set-up of the factory ROM.
Good luck.
Doug M.
is it any other way i might be able to fix without hard reset...just want that to be a last resort
P.S. my phone have seen some water it fell in outside during a rain storm so didnt know if that would have something to do with it also but this also happen a couple of months ago
It sounds like you have already tried the normal procedures. Your best bet for future stability is to start over. If you follow one of the 2 guides in my earlier post, you will have a much more stable device going forward. It takes a bit of time, but is worth it. Once you get the hang of it, it gets easier.
Doug M.
just try to hard reset it. you always can go back to factory ROM.
now im using wm 6.5, and my device performance is spectacular. XDA is the best.
thx guys.....i will try the energy rom 3 wm 6.5 that i have heard alot about
energy rom is a good choice and my current rom .
don't worry , once you figure out the rom scene you will hard reset all the time and will learn how to backup your contacts and texts .
a good thing is that nrg's rom even has a good restoring program built in . Pim restore . i use it religiously .
If you run into problems flashing another ROM or the phone still "acts" up, the drop or the water may have damaged some circuitry in the device.
You may need to restore to a factory state and send it in for service.
thx guys i was out of town.........but yea i got a replacement coming in so back to the drawing board with adding all the software i had on the old one to the new one but once again thx
my phone would turn off randomly and when slid it shut. bent the battery pins out a bit and all good now. just thought I'd add that as a possible problem/solution
lol wish you told me a few days sooner i just filed insurance claim and got a new but thx anyway because i might just have to do that with phone....im not hard on phones just bad luck if you know what i mean
Other things to do in the future if you come across similar problems:
1. Uninstall the last app you installed prior to having the problems.
2. See if problem is still there...
3. Repeat 1&2.
Always back up your data... There are some very nice backup programs available.
If above doesn't work.
Hard Reset and load programs one at a time after hard reset until problem reappears...or hopefully does not reappear.
If you load a bunch of apps on your phone, it can be more difficult to narrow down because of the amount of changes made by each app it may not return to the same state after uninstalling a program. That is why Hard Reset can be your friend...
Hi folks, I've been using abusalza's Ulitmate-X roms for a good few months now, and recently I decided to update to his WM6.5 beta version, after doing that whenever the phone needs a soft reset, it will boot and say 'preparing your device for first use', and format everything on the phone and then boot up.
So I decided to flash his Ultimate-X2 V11 rom, same issue, and now I've gone back to his Ultimate-X V9, which I'm pretty sure is the same ROM I've been using for some months now (never had any issues before), and whenever it requires a soft reset it will do the 'preparing device for first use' thing, it will do the customization install, then the connection setup, then reboot itself and just sit there on the PDA Corner Ultimate screen until I reset it, soft resets just keep hanging on the PDA Corner Ultimate screen, and unless I hard reset it (soft keys and press the reset button, that's a hard reset isn't it?) it won't get passed that point. I've just this minute had to hard reset it and it's booted, but it takes a good 5-10 minutes each time which gets annoying.
Has something packed up in my Kaiser to make it do this? Seems out of 3 ROM's I've tried they all now have the same issue, including a ROM I'm pretty sure I used to use with no issues.
Sorry if this is a common problem and easy to cure, I did search for 'preparing your device for first use' and something came up from months ago, but a totally different issue.
Thanks for any advice, Dom.
duuuuuuuudddeeeee!!! you have made TWO basic mistakes
1. this post belongs in the thread for the ROM you are using (same series as myself) where you will find...
2. you need to flash stock ROM first!!! it is written on the FIRST PAGE of the thread...i mean seriously, EVERY DAY on that thread, you will see this pattern:
noob writes a post..."my device hard resets after soft resetting...your ROM sucks, etc, etc"...then someone directs them to the instructions on the first page of the thread and problem solved. afterall, the instructions are there on the first page so that people can read them along with the FAQ.
I'm sorry!
I'll not bother you again I promise *goes to read the FIRST PAGE of the ROM topic*
The only reason I've never done this before is because I'm sure I've flashed ROMs in the past and not had to go back to OEM first
Thanks a lot, I'll go have a read now.
Dommo said:
I'm sorry!
I'll not bother you again I promise *goes to read the FIRST PAGE of the ROM topic*
The only reason I've never done this before is because I'm sure I've flashed ROMs in the past and not had to go back to OEM first
Thanks a lot, I'll go have a read now.
Click to expand...
Click to collapse
Well at least you didn't start a new thread in the rom development forum
And the OEM first, appears to be a 6.5 only thing, so how would you know...
But I still won't forgive you for not reading the first page or the FAQs. When the doctor gives you new medication to get rid of the flu, do you read the label , or do you just take two or three and figure that should be enough.
denco7 said:
Well at least you didn't start a new thread in the rom development forum
And the OEM first, appears to be a 6.5 only thing, so how would you know...
But I still won't forgive you for not reading the first page or the FAQs. When the doctor gives you medication to get rid of the flu, do you read the label , or do you just take two or three and figure that should be enough.
Click to expand...
Click to collapse
[sarcasm]I always thought the best way was to take all the pills at once? No wonder I feel a bit rough afterwards [/sarcasm]
I do feel like a tool at the moment so that's something to be chuffed about
Cheers, just downloading another updated rom and I'll give that a go, it's back to OEM now.
Thanks again.
I hope someone can help me with this before I go stark, raving mad.
I tried to search for this problem but it's hard to know just what to search for. I don't think this is Raphael specific but was unable to find a general software forum.
When an alarm or reminder goes off on my Fuze, I don't (usually) get the normal popup dialog. To get it, I need to tap on two tiny icons, which is a major pain. I've been fighting this for months. I've tried a hard reset followed by installing my software a programs one at a time with an alarm test after each install. I've tried restoring several old backups. I've still been unsuccessful in tracking it down.
After a hard reset, it works like it's supposed to, but as I continue to install software and use the device, it eventually stops working.
Can anyone give me a hint as to where I might be able to begin looking?
Thank you in advance!
Not a single reply. :-( Am I really the only person who has experienced this?
I've been fighting with this problem for literally months. I just recently went through several hard resets and restores, trying to find some specific application or condition that causes the problem. It started happening again a couple of days ago, and I'm absolutely sure that this time I had not installed any new applications. The only change from the time that reminders were working properly to the time that they stopped working was that I had downloaded some applications data (email, etc.).
If anybody has any ideas at all, I will be forever indebted.
Thanks,
Keith
I have the same problem, I think. I will go into my settings and tell it to give me pop ups for new SMS, MMS, notifications/reminders, and then they stop happening and I go back into settings and have to recheck the boxes. I'm not sure what's causing them to quit though. I just flashed a cooked ROM to my phone, but I don't like it so I'm trying to find something new. The problem was on the factory ROM that came with my phone.
I have the same issue, im using the ROMeOS 6.5 ROM and i dont get notification too...
gonna try and fiddle around the advanced config app