Related
Hi there, I'm new to this forum so forgive me if I'm not doing things quite right. I've recently purchased a new MDA III and am unable to install Jave programs (.jar) as the Midlet manager is not installed (eventhough it should be according to the manual!!)
T-Mobile have eventually realised that the Midlet manager is not included when it should and have asked me to run SETUP-MidletManagerAppSuite-1.0.0.4-MDAIII-ENG-14Jan05.exe which they sent me in an email. I've run this but it fails with message “Unable to install application. Please update your device ROM to the required version before trying again”.
T-Mobile then asked me to download latest ROM update from http://www.t-mobile.de/blackberry_solution/support/english (there is an update for an MDA III eventhough it says BlackBerry). I ran upgrade MDA3_TMUK_v106160_SHIP0307.exe which upgraded me to:
CE Image (1.06.00)
Extended CE Image (1.06.160)
Radio Image (1.00.00)
Ps. this was the previous version I had before the upgrade but I thought I'd run it anyway.
I then tried to re-run MIDlet manager installation program but it failed with the same error.
Is anybody out there able to suggest anything please? T-Mobile's answer was that I have to wait for HTC the manufacturer of MDA's to release a new ROM update.
Many thanks in advance,
Regards,
John
Hello,
I have an O2 XDA Mini S (HTC Wizard) which is a G4 device running the latest 02 carrier rom. I tried to flash it with the latest version of the Dutch Qtek 9100 rom. I did everything what's in the manual, after a few minutes shelltool says Make a hard reset now. When I make the hard reset I still get the startup screen of my old rom. The language, applications and the themes of the Dutch Qtek 9100 are installed fine.
I installed the cab files and disabled the Radio module before flashing the rom. After it failed the first time I tried again but just the same
michielc said:
Hello,
I have an O2 XDA Mini S (HTC Wizard) which is a G4 device running the latest 02 carrier rom. I tried to flash it with the latest version of the Dutch Qtek 9100 rom. I did everything what's in the manual, after a few minutes shelltool says Make a hard reset now. When I make the hard reset I still get the startup screen of my old rom. The language, applications and the themes of the Dutch Qtek 9100 are installed fine.
I installed the cab files and disabled the Radio module before flashing the rom. After it failed the first time I tried again but just the same
Click to expand...
Click to collapse
Shelltool only flashes the OS part of the DOC chip, not the splashes...
mestrini said:
Shelltool only flashes the OS part of the DOC chip, not the splashes...
Click to expand...
Click to collapse
Is it possible to replace the splash screens with the screens of the rom that I'm trying to install on my Wizard ?
Hi all,
I tried to upgrade my MDA compact II (HTC Charmer) to WM6, but during the first step, downgrading to the "no vendor" version I made a mistake. A used a wrong version, it was for Prophet. After the final reboot, the device froze in the splashscreen "T-Mobile". After that I tried to do exactly the same with a "Charmer" version, but it didn't help me, the situation was the same.
However, now I'm able to flash successfully only the last vendor provided ROM update "RUU_Compact_ll_2060227_20602110_021921_T-MobileUK_Ship.exe", but it doesn't help me anyway, my Charmer is still freezing in the splashscreen. I tried to downgrade it , but the application gives the following error: "UPGRADE ONLY". When I try to make a hard-reset, and after that to confirm the factory settings by pressing "Yes" (green) button, the result is "Format FAT partition" and then "format is failed".
Only the bootloader is working now as well as the battery charging. Please, help me to turn back to the life my Charmer!
And one additional question: can I perform a CID unlocking just by ROM-flashing or the device must be fully operable?
Flash this:
http://rapidshare.com/files/41754719/RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe.html
After that, you should be able to make hard reset. If you succeed, flash "RUU_Compact_ll_2060227_20602110_021921_T-MobileUK_Ship.exe" - that.
Hello there,
I am a new use an recently got an MDA PM200. I am in exactly the same situation as petrun. I have tried the flash suggested by vlodeck but it doesn't work, saying incorrect vendor ID (I guess that's because it's for a Prophet?).
What should I do next...?
Thanks.
OK, I succeed with a little progress. Many thanks to vlodeck, I will try to explain what happend...
I successfully flashed my Charmer with this Prophet ROM:
RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe
Full link:
http://rapidshare.com/files/41754719/RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe.html
But it was possible only by using this "No ID" update application, not original one, maybe because my device is still locked:
Full link:
http://www.windowsceportal.hu/tartalom/programok/htc_charmer_upgradeut_noid.zip
After that I succeed to format the FAT partition (finally ). But I cannot after all to flash the latest official MDA compact II firmware. There is two possible events, which I experienced:
1. When I try to use the original flashing application, I get the following response: "UPGRADE ONLY".
2. When I try to flash the official MDA compact II ROM, but through the "No ID" application, I get "INVALID COMMAND".
Just for explication, now my device cannot boot, it freezes in the splashscreen (it is Qtek now, not T_Mobile...) and the following versions could be read:
IPL 2.06
SPL 2.20.0000
GSM 02.47.21
OS 2.20.7.34
So, how I can do that? What should I do further? I would like to unlock my Charmer, but should I firstly make it operable?
Thanks in advance for your help, guys!
By the way, all described above I tried sevetal times with the same result.
The other thing is that... all links about the CID unlocking downloads, which I found here are no longer active. Any alternatives?
Rise from the dead!
Incredibly, but it's a fact! After successfull FAT formating I probably didn't wait long enough. Today I turned on my Charmer and several seconds after the splashscreen "QTEK" it successffully booted in WM5, performed all settings and finally started to work!
It's GSM module works, the Bluetooth works, I am able to start different applications. Just the camera does not work. And the most strange thing for me is that this ROM was for Prophet, not for Charmer
So, after all, how to proceed to upgrade to WM6? Now the bootloader is above ver.2.
Should I firstly flash it with proper ROM (for Charmer) or it's not necessary?
Should I unlock it as is now (Prophet ROM)?
Vlodeck, I rely mostly on you, since the WM6 with Touch FLO is your creation.
Thanks!
You dont have to CID unlock. Just flash that WWE T-mobile WM5 AKU2 for Charmer. Good luck.
Maybe I am boring, but steel need an advice: I cannot flash "WWE T-mobile WM5 AKU2".
1. The original RUU gives me "UPGRADE ONLY", maybe because my SPL after flashing the Prophet ROM is 2.20
2. This "NO ID RUU":
http://www.windowsceportal.hu/tartalom/programok/htc_charmer_upgradeut_noid.zip
reaches 2% and gives "INVALID COMMAND", after that - only bootloader screen.
3. This "NO ID RUU":
http://forum.xda-developers.com/attachment.php?attachmentid=42657&d=1183226200
cannot open the nk.nbf image (but works with other images), I don't know why.
What is the solution? Any ideas? Maybe some tool to downgrade the SPL to ver.1? I tried (it perhaps was bad idea)"RUU_Charmer_1120223_11202110_11220_T-MobileUK_Ship" and IPL became 1.12, but SPL remained 2.20... and Charmer didn't boot after that. After flashing the Prophet ROM it works again and IPL is 1.12, SPL is 2.20
In brief... how to flash successfully the last Charmer ROM?
If you cant flash the AKU 2 charmer rom, then go for AKU3.3 rom (can be german, that doesnt matter). Once done that, flash wm6.
Success
Yeah! Thanks to vlodeck now everitging is all right! I flashed the original German AKU3.3 ROM by using this RUU:
http://forum.xda-developers.com/attachment.php?attachmentid=42657&d=1183226200
(The original one gives "INVALID VENDER ID", of course, in German ) After that - successfully upgrade to WM6 TouchFLO.
Briefly:
1. First try to flashing WM6 - crash! The reason: old bootloader version (IPL/SPL = 1.12).
2. Flashing the Prophet ROM - success for FAT formatting. The Charmer turned back to life.
3. Flashing the German AKU3.3 ROM from T-Mobile, but through the No ID RUU.
4. Upgrade to WM6 TouchFLO by vlodeck. At the begining I reached the same problem, as described here:
http://forum.xda-developers.com/showthread.php?t=331717
but after istalling cert_spcs.cab and enablerapi.cab in my device I succeed to finish the process.
Thanks vlodeck, good job! This ROM is really amazing!
petrun said:
Yeah! Thanks to vlodeck now everitging is all right! I flashed the original German AKU3.3 ROM by using this RUU:
http://forum.xda-developers.com/attachment.php?attachmentid=42657&d=1183226200
(The original one gives "INVALID VENDER ID", of course, in German ) After that - successfully upgrade to WM6 TouchFLO.
Briefly:
1. First try to flashing WM6 - crash! The reason: old bootloader version (IPL/SPL = 1.12).
2. Flashing the Prophet ROM - success for FAT formatting. The Charmer turned back to life.
3. Flashing the German AKU3.3 ROM from T-Mobile, but through the No ID RUU.
4. Upgrade to WM6 TouchFLO by vlodeck. At the begining I reached the same problem, as described here:
http://forum.xda-developers.com/showthread.php?t=331717
but after istalling cert_spcs.cab and enablerapi.cab in my device I succeed to finish the process.
Thanks vlodeck, good job! This ROM is really amazing!
Click to expand...
Click to collapse
WHERE I CAN GET BOUTH FILES cert_spcs.cab and enablerapi.cab
AND WHAT VIRSION OF PROPHET ROM SEND ME WORKING LINK THX DEAR
Charmer Stuck At Splash Screen
CHARMER STUCK AT SPLASH SCREEN
--------------------------------------------------------------------------------
I HAVE A MDA COMPACTII ''MADE IN TIWAN'' I WITCH WM5 I WANT TO UPGRADE IN TO WM6 SO I UPGRADE THIS WM6 TouchFLO Charmer WM6 ver. 2.1 FINAL by vlodeck AT THIS HOME PAGE http://forum.xda-developers.com/show...harmer+cert_sp... AFTER THIS I HARD RESET MY MDA C2 ITA ON BUT THE LANGUAGE IS NOT ENGLISH I CANNOT UNDERSTAND ....
SO I CAN REFLASH IT WITH THIS ROM Charmer_Touch_GER_Beta_2.7 .. AFTER FLASHING COMPLETE I SOFT RESET MY MOBILE.
SO MY MOBILE STUCK ON SPLASH SCREEEN ONLY T-MOBILE IS SHOW
MY MOBILE DETAIL IS AS UNDER
IPL 2.06 .0001
SPL 2.06 .0001
GSM 02.19.21
OS 4.0.0.0
PLZ DEAR SIR WHAT IS SOLUTION OF MY MDA C2
MDA2 CANNOT CONNECT WITH ACTIVE SYNC
Of course it cannot connect with ActiveSync, the device doesn't boot. One certain solution for bricked Charmer is Prophet ROM:
RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe
Use this link:
http://rapidshare.com/files/41754719/RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe.html
In order to flash this, you should enter the bootloader, without using the ActiveSync. After that try to perform a hard reset, you probably will succeed to format the FAT partition.
if you cannot connect the pda to pc HOW CAN U PUT THE ABOVE PROPHET RUU ON CUREENT?
I have a charmer and I was trying to update to wm6. I can´t because the ipl is 1.12. I updated rom to german aku 3.3. But I can´t hard reset. format error. I´m trying to put prophet rom to format it, but when I send the prophet rom, it always give me an error at 95%. error 326 - this nbf file cannot be used fo your pda phone. please check your nbf file. the aku3.3 rom flashes ok. any idea?? I try tu send a radio rom. after that is the same. 95%error. please help. I can´t bring my charmerback to life.
Hello together,
I have the same problem like _mestre_.
I updated from T-Mobile AKU 3.3 GER to WM6 and flashed back to WM5 without problems, but when flashing again to WM6 from vlodeck my charmer didn't boot anymore and had that "Format is failed"-problem when making a hard reset. I could not recover my device until now with the method explained in this thread cause of the problems "error 326 - This nbf file cannot be used for your pda phone". So the Prophet Rom does not seem to work with boot loader 3.x. Has anyone any idea? Please help! Thank you very much in advance!
Yallah said:
Hello together,
I have the same problem like _mestre_.
I updated from T-Mobile AKU 3.3 GER to WM6 and flashed back to WM5 without problems, but when flashing again to WM6 from vlodeck my charmer didn't boot anymore and had that "Format is failed"-problem when making a hard reset. I could not recover my device until now with the method explained in this thread cause of the problems "error 326 - This nbf file cannot be used for your pda phone". So the Prophet Rom does not seem to work with boot loader 3.x. Has anyone any idea? Please help! Thank you very much in advance!
Click to expand...
Click to collapse
same problem here... any suggestions or is my charmer bricked?
Hi folks, I have just got a T-Mobile Compact iv after handling a few HTC Touch Diamonds through my company and loving it in comparison with my old Vario 2 (HTC TyTN 1)
As I am on Contract with T-Mobile I have gone for the Compact iv version as it was free to me however Once receiving it I noticed the rom including the TouchFlow is a really really old version compared to what's on the Touch Dimaonds.
I have spoken to T-Mobile and they told me they can't supply a newer version but they have given me full permission to use the one on the HTC Website for the Touch Dimaond and if anything was to go wrong they will still support me.
I have a serial from one of the Diamonds we have here in the company in order to download the rom for my compact but I thought I would check here first as HTC refuse to give me any information as its a T-Mobile branded phone that the rom for the Touch Dimaond is perfectly fine for the UK Compact iv?
Thanks in advance for any information.
Regards,
Max
max_carpenter said:
Hi folks, I have just got a T-Mobile Compact iv after handling a few HTC Touch Diamonds through my company and loving it in comparison with my old Vario 2 (HTC TyTN 1)
As I am on Contract with T-Mobile I have gone for the Compact iv version as it was free to me however Once receiving it I noticed the rom including the TouchFlow is a really really old version compared to what's on the Touch Dimaonds.
I have spoken to T-Mobile and they told me they can't supply a newer version but they have given me full permission to use the one on the HTC Website for the Touch Dimaond and if anything was to go wrong they will still support me.
I have a serial from one of the Diamonds we have here in the company in order to download the rom for my compact but I thought I would check here first as HTC refuse to give me any information as its a T-Mobile branded phone that the rom for the Touch Dimaond is perfectly fine for the UK Compact iv?
Thanks in advance for any information.
Regards,
Max
Click to expand...
Click to collapse
A Touch Diamond ROM will work fine on a Compact IV. It´s a T-Mobile branded HTC Touch Diamond with a different cover. Hardware specs are all the same. So there's no reason why it wouldn't work. Just know what you're doing when flashing it. It could go wrong.
Thanks for the reply. I have flashed a few phones including HTC's and Nokias so I am not worried about flashing it, its part of my job being in IT I just wanted to ensure that the rom would work correctly encase there were any slight differences in hardware but I have got an HTC Branded Serial code so I will go ahead and download the rom upgrade
Thanks,
Max
max_carpenter said:
Thanks for the reply. I have flashed a few phones including HTC's and Nokias so I am not worried about flashing it, its part of my job being in IT I just wanted to ensure that the rom would work correctly encase there were any slight differences in hardware but I have got an HTC Branded Serial code so I will go ahead and download the rom upgrade
Thanks,
Max
Click to expand...
Click to collapse
Rom's could be found here to. They are all orignal roms.
See I would do that but as T-Mobile would normally no longer support you if you change roms and they have told me they will but as long as its downloaded from the HTC website I think I am going to be safe this time.
I wouldn't mind trying the 6.5 roms I am very intrested but I think I will wait until I have a spare phone
Regards,
HELP!! Won't run
:-( I tried to use the rom update but it says invalid Vendor ID then restarts my phone. It actually checking and finding I am running T-Mobile. Is there anyway around that?
Regards,
Max
Max, have a read of the wiki and you'll see there are a few things you need to do prior to flashing a new one. The most important one is installing HardSPL - this removes the invalid vendor id probs. Like I say, read the wiki and all will be clear.... if it isn't clear - don't risk it!
max_carpenter said:
:-( I tried to use the rom update but it says invalid Vendor ID then restarts my phone. It actually checking and finding I am running T-Mobile. Is there anyway around that?
Regards,
Max
Click to expand...
Click to collapse
Follow this tutorial and it should work. You could take a look here to.
Hi, I had just read all the instructions downloaded and installed the HardSPL from the second link you provided and Installed the orginal version (not the latest on that link as its what it said to try first)
I flashed it ok came back on but the screen is jurky and very slow when it finally finished coming back on it went straight to the customization screen which is normal for a flash but took forever (alot longer than I have seen before) once complete I then re-connected it back up and went to run the HTC Rom upgrade and still says invalid Vendor ID.
Am I undesrtanding this wrong and I need to copy certain files out of the HTC Upgrade and use them along side the files I downloaded with the HardSPL and use a mixture of files to get it working.
Regards.
Max
max_carpenter said:
Hi, I had just read all the instructions downloaded and installed the HardSPL from the second link you provided and Installed the orginal version (not the latest on that link as its what it said to try first)
I flashed it ok came back on but the screen is jurky and very slow when it finally finished coming back on it went straight to the customization screen which is normal for a flash but took forever (alot longer than I have seen before) once complete I then re-connected it back up and went to run the HTC Rom upgrade and still says invalid Vendor ID.
Am I undesrtanding this wrong and I need to copy certain files out of the HTC Upgrade and use them along side the files I downloaded with the HardSPL and use a mixture of files to get it working.
Regards.
Max
Click to expand...
Click to collapse
Did you successfuly flash the HardSPL into your device? You can check this by doing this:
To confirm is Hard-SPL is on your device, manually enter Bootloader by pressing the Volume Down and performing a soft reset at the same time. If successful you will see the tri-colour screen and the following will be displayed
Hard SPL 1.40.Olinex
DIAM100 MFG 64M
SPL-1.40.OliNex
I've checked what mine said, and this is what I've got back.
DIAM200 64M
SPL-1.93.OliNex
MicroP-Diam (LED) v11
So I guess you need a different HardSPL. Can someone confirm this for me? Checked my own MDA Compact IV map on my laptop and saw to files that I've used for flashing the HardSPL. Used Unsigned-Hard-SPL-Diamond-OliNex.zip and RUU_Signed_1_93OliNex_HSPL_UnsignedEdition.zip. Needed to overwrite RUU_Signed.nbh in the map for Unsigned-Hard-SPL-Diamond-OliNex with the one out of the map from RUU_Signed_1_93OliNex_HSPL_UnsignedEdition. This worked for me then. Added the files for you. So maybe this works for you.
I get:
DIAM200 64M
SPL-1.40.OliNex
MicroP-Diam (LED) v11
Have I done it with the wrong version now then?
I have tried using the files you have supplied and that worked as all the other flash things fail now so let me give it a go now that I have completed with your files.
Regards,
Max
max_carpenter said:
I get:
DIAM200 64M
SPL-1.40.OliNex
MicroP-Diam (LED) v11
Have I done it with the wrong version now then?
I have tried using the files you have supplied and that worked as all the other flash things fail now so let me give it a go now that I have completed with your files.
Regards,
Max
Click to expand...
Click to collapse
I guess it had to work. Don't understand why it didn't. Because the HardSPL flash worked for you I don't understand why you stil had the invalid Vendor ID message. I hope my version will work for you.
Well after I did your flash and it finally came back on and finished the customization, the TouchFlo no longer appeared, just got a blank home screen and stayed like that. I have started the HTC Rom upgrade and it is actually flashing this time,
at 19% as I am writing this.
So I will post my results when it has finished.
Thanks,
Max
URGENT! Rom Update Failed!
Hi I need some urgent help.
The HTC Rom Update was running through gets all the way to 100% on screen and on mobile and then the phone restarts and the software says 'Update Error'
the phone then restarts to Bootloader and says:
DIAM200 64M
SPL-1.93.Olinex V11
MicrP-Diam (LED) V11
PSOC-VICT STAGE_PVT v0x20
Upgrade ROM Code error
Please Try Again
I have tried using a completly different computer and run the upgraded rom flash again and again it runs all the way through then fails at 100% again.
HELP!!! What do I do,,, I have no phone now :-(
Ok I have managed to flash it back to the posted by Crazyrooster, in this thread and its working again now the T-mobile branding has now gone and in Device Info it says:
Rom: 2.03.405.2 WWE
Date: 12/19/08
Radio: 1.09.25.23
Which is the latest version right? So how come the HTC Rom update failed but flashing the one contained earlyier on in this thread suddenly works and reports the latest vesion?
Regards,
Max
max_carpenter said:
Ok I have managed to flash it back to the posted by Crazyrooster, in this thread and its working again now the T-mobile branding has now gone and in Device Info it says:
Rom: 2.03.405.2 WWE
Date: 12/19/08
Radio: 1.09.25.23
Which is the latest version right? So how come the HTC Rom update failed but flashing the one contained earlyier on in this thread suddenly works and reports the latest vesion?
Regards,
Max
Click to expand...
Click to collapse
I really don't have a clue. So the phone is working now with a original HTC Touch Diamond ROM? Very strange that it gave problems. When I flashed a phone (MDA Touch) for the first time it worked for me. When I flashed my MDA Compact IV I didn't have any problems.
Right,
I didn't use the HTC Rom as the last flash it was the one listed a few posts back and it reports:
Rom: 2.03.405.2 WWE
Radio: 1.09.25.23
However I have the following problems and I am not sure they are related:
1: Sometimes on call its crackling
2: Loud speaker is awful and very distorted
3: Internet not working on all programs (just phoned t-mobile and requested internet settings to be resent see if that works)
4: My hang up button doesn't seem to be working once the screen has gone off.
5: Signal seems to be very week.
Any ideas anyone?
Regards,
Max
Ok I have just spoken to T-mobile and they reckon if I phone HTC they will supply me back with the T-mobile Rom.
But until then as they are shut I might experiment with further flashes to see if I can get it working better because I do want the latest software runs so much smoother but the problems I am currently having I can't live with.
Max.
Ok, hmm I have in theory 'downgraded' the rom now on version
1.93.405.1 WWE downloaded directly from the HTC website radio version 1.00.25.05 and I still have the same problems:
crackling or fuzzing on calls,
the loudspeaker is a bit better quality but still a bit distorted (even at lowest volume)
internet works but for some reason, activesync wont work with our exchange server, msn mess doesnt work, you tube app.
still feels quite warm but thats prob all the flashing I am doing.
The latest HTC rom from their website still gets to 100% then fails and leaves no os on my phone just the bootloader.
One problem fixed the hang up key now works fine.
So I guess its just experimenting with the radio now and get a better signal.
Hi everyone,
I try update my windows 6.0 to 6.5 yesterday, i fallow all steps and during the update, when the update is in 16% a error happen. I try user the recovery but doesn't work, and now when i start my phone, show the tri-color screen and stay.
What i can do to fix this?
Important remember, i need to use the jump spl 1.93 to get out of the white screen for update the windows.
Thanks all.
Charlles said:
Hi everyone,
I try update my windows 6.0 to 6.5 yesterday, i fallow all steps and during the update, when the update is in 16% a error happen. I try user the recovery but doesn't work, and now when i start my phone, show the tri-color screen and stay.
What i can do to fix this?
Important remember, i need to use the jump spl 1.93 to get out of the white screen for update the windows.
Thanks all.
Click to expand...
Click to collapse
Reflash your original carrier rom. from the tri-color screen.
Since WM 6.5 has not and will not be released for the Kaiser, I am assuming that you are trying to flash a custom 6.5 rom, and have followed all the steps described here:
http://forum.xda-developers.com/showthread.php?t=433835
I try install this ROM: http://forum.xda-developers.com/showthread.php?t=397121
Sorry, my english is very bad.
"Reflash your original carrier rom. from the tri-color screen." What do you mean?
Thanks
Charlles said:
I try install this ROM: http://forum.xda-developers.com/showthread.php?t=397121
Sorry, my english is very bad.
"Reflash your original carrier rom. from the tri-color screen." What do you mean?
Thanks
Click to expand...
Click to collapse
Did you follow all the steps in the link I gave you above before you tried to flash the Hyperdragon rom ?
What I mean is to find the original rom that came with your phone, in the Kaiser Wiki and reflash that on to your phone.
How can i know what is my original rom?
I remember, the visual is like this: http://pdadb.net/img/htc_tytn_ii.jpg
thanks
Charlles said:
How can i know what is my original rom?
I remember, the visual is like this: http://pdadb.net/img/htc_tytn_ii.jpg
thanks
Click to expand...
Click to collapse
Where and when did you get your phone and who is the carrier ?
I from Brazil, the carrier is CLARO, i buy of a friend in this month, i have no idea when he buy.
In the box of the phone, is write: "Windows Mobile 6 Professional"
have another way to fix this?
What is the built of your tytn II i.e. its HTC TYTN II or AT&T Tilt ???
if its of HTC then try to update the latest rom 6.0 or 6.1 with radio (as both are official) of HTC available on kaiser wiki page and vice versa for AT&T Tilt.
Hope it'll sort out ur problem.
Cheers
kashifmehmood said:
what is the built of your tytn ii i.e. Its htc tytn ii or at&t tilt ???
If its of htc then try to update the latest rom 6.0 or 6.1 with radio (as both are official) of htc available on kaiser wiki page and vice versa for at&t tilt.
Hope it'll sort out ur problem.
Cheers
Click to expand...
Click to collapse
htc tytn ii
A try a lot, and usualy the errors bellow happen:
ERROR [294] : INVALID VENDER ID
ERROR [262] : UPDATE ERROR
If help, what show in the screen is:
RUUNBH
KAIS120
SPL-1.94.0000
CPLD-8
USB
You need other information?
Thanks
Fellas,
I read in another topics, and i think this error happen because i don't have the HardSPL installed on my HTC TyTN II.
Now the question, how i can install HardSPL with my phone frozen on the tri color screen?
How can i know if HardSPL is install on my phone?
Thanks.