When I turn the device on it shows a tri-colour screen and below its written Serial.I took out the battery,SD,sim and all but it still shows the tri-colour screen.I even performed a soft and hard reset but no result when I connect it to my PC it says USB Device Not Recognized and Windows Mobile device Center doesn't detect it.On the device below the tri-colour screen it says USB when I connect it to my PC but nothing happens.Here is what is written on the tri-colour screen:
KAIS130
SPL-1.93.0000
CPLD-8
I've had this phone for more than one year and this is the first time I'm having this problem.The phone was on stand by and when I pressed the power button It showed the tri-colour screen since then it keeps showing this.I didn't note the radio version and normally when the phone starts it says smart mobilty before loading windows mobile. The phone is a first hand one and I didn't bought it from any carrier.It's made in Taiwan.Please help me I'm new to these things and I really want my phone back :'(
Did you search or read the wiki for the fix?
Hi, i was watching the wiki for help, but I couldn't find something like that, please if You have some solution for this issue, please help us, I can turn on my device when I connect the charger and press the power on button at the same time, but I can't connect it with my PC, It said "Unkown Device", sometimes before I could connect it but it doesn't work anymore.
You didn't see this in the wiki? If you can't find this link then I would think that you might not be able to follow the directions needed to fix the problem. Sorry I'm board today.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I searched for a fix but haven't find anything helpful
Open wide..
http://forum.xda-developers.com/showthread.php?t=354553
AM911 said:
I searched for a fix but haven't find anything helpful
Click to expand...
Click to collapse
I think you haven't read or search enough read here
ChumleyEX said:
Open wide..
http://forum.xda-developers.com/showthread.php?t=354553
Click to expand...
Click to collapse
LoL....mmm...that made me hungry...
Most likely he will try the above fix and really jack his phone up. If he can't look through the wiki and find the fix (right there in bold letters) I doubt he can use mtty.
Oh, thanks
I don't know what happen with the senior members, if you don't like help junior, ok don't do it, but It doesn't mean that we are not able to do something like that, thanks I found that thread, I can follow some instructions.
Suggesting where the thread was, IS helping..
I often answer questions with an answer, but thats normally when someone has searched and read the Wiki.. Yes I know searching at times can be pretty hardcore, infact this is mostly the hardest place to find stuff while searching. Thanks because you have to wade through so many useless threads.. But this was in the wiki bright and clear as the sun on a cloudless day. If it were a light it would have been so bright that the folks in the space station would have to close the blinds...
Also, wouldn't you say that the Senior members (Mods included) did help by putting together the Wiki and the thread that you need? All that hard work, time and effort, they put into making that wiki..
myANdrew16 said:
Oh, thanks
I don't know what happen with the senior members, if you don't like help junior, ok don't do it, but It doesn't mean that we are not able to do something like that, thanks I found that thread, I can follow some instructions.
Click to expand...
Click to collapse
And the link with the answer...that's not help?
ChumleyEX said:
Suggesting where the thread was, IS helping..
I often answer questions with an answer, but thats normally when someone has searched and read the Wiki.. Yes I know searching at times can be pretty hardcore, infact this is mostly the hardest place to find stuff while searching. Thanks because you have to wade through so many useless threads.. But this was in the wiki bright and clear as the sun on a cloudless day. If it were a light it would have been so bright that the folks in the space station would have to close the blinds...
Click to expand...
Click to collapse
You are always right ChumleyEX
Related
I hate for this o be my first thread on here, but I rendered my Tilt unusable and after searching around I can't find any information on how to fix this.
Last week I dropped my my Tilt, the battery fell out, and when I turned it back on all the settings had been reset to default. I was trying to fix this today and had just gotten around to reinstalling HTC Home when things started getting buggy. It said I didn't have enough memory, but there was pretty much nothing visible in file explorer for me to delete and I was unable to open "remove programs." I tried to just do a hard reset but being an idiot I guess I misunderstood the directions and nothing has been working since.
The first thing I saw was the tri-color screen with "Serial" at the bottom and "KAIS1*0 MFG, SPL-1.0.Olipof, CPLD-8" up top in the red. When I hit the soft reset button I et he AT&T screen and the regular numbers in red but it stalls there. I can get back to the tri-color screen by soft resetting while holding down the power and camera buttons, but otherwise I always soft reset to the AT&T screen and stall there. Can anyone tell me what I might want to do? Thanks.
By "stall" how much time have you given it? The first boot after a hard reset is always going to be much longer
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You have just Bricked Your Phone. But I think you can Recover. Press and Hold Down the Caera And Power Buttons and Stick yourstylus in the Soft RESET Hole. Hold Them And See if you get back to the Tri-Colour Screen. If you can then Bonus And you may be able to recover.
It's definitely 100% stuck at that screen, I left it for 15+ minutes.
I really hope its not bricked I CAN get back to the tri-color screen...
Edit: I just realized that it flashes "No Image File!" right before going to the tri-color screen.
Do you see "USB" at the bottom of the bootloader screen if it is connected to your PC when you turn it on?
You also have the option of trying to flash a new ROM using a microSD card.
NotATreoFan said:
Do you see "USB" at the bottom of the bootloader screen if it is connected to your PC when you turn it on?
You also have the option of trying to flash a new ROM using a microSD card.
Click to expand...
Click to collapse
That was going to be my next Step. If you can See USB when you plug it into your computer You are in luck. Also, DO you have an MicroSD Card?
Actually I haven't had a chance to connect it to my PC yet, I'm not at home. I also have never flashed a different ROM onto it or done anything that should void the warranty so I'd be really surprised if I was able to brick it this easily.
Edit: I should be back at my PC later in the week so I'll try that, thanks. I also DO have a micro SD card.
infiniteengine said:
Actually I haven't had a chance to connect it to my PC yet, I'm not at home. I also have never flashed a different ROM onto it or done anything that should void the warranty so I'd be really surprised if I was able to brick it this easily.
Edit: I should be back at my PC later in the week so I'll try that, thanks. I also DO have a micro SD card.
Click to expand...
Click to collapse
Then all is not lost. Let us know what happens when you get to a PC with a Sync Cable.
Alright, will do, thanks for your help!
infiniteengine said:
Actually I haven't had a chance to connect it to my PC yet, I'm not at home. I also have never flashed a different ROM onto it or done anything that should void the warranty so I'd be really surprised if I was able to brick it this easily.
Click to expand...
Click to collapse
Actually it looks like your device is HardSPL'd so your warranty is VOID. But I don't think that is your problem. It looks like this is something your going to be able to fix as suggested once you get to a computer. Many devices have been saved from this point as long as you take your time and be very careful on what you do. Esp if you have to get in useing the command line.
infiniteengine said:
The first thing I saw was the tri-color screen with "Serial" at the bottom and "KAIS1*0 MFG, SPL-1.0.Olipof, CPLD-8" up top in the red.
Click to expand...
Click to collapse
I need help, I finish installing a rom and when finish the phone wont start nothing comes. I even plug the charger and it does not even turn any light on. I try hard reset and nothing. Can anybody help or maybe is not good anymore. Or anybody could fix it for me. Let me know.
Thanks.
sinverguenza said:
I need help, I finish installing a rom and when finish the phone wont start nothing comes. I even plug the charger and it does not even turn any light on. I try hard reset and nothing. Can anybody help or maybe is not good anymore. Or anybody could fix it for me. Let me know.
Thanks.
Click to expand...
Click to collapse
Well - here is what I would do -
1. remove the battery and put it back in.
2. make sure that you have it plugged in - with it plugged in do you have any lights flashing?
3. My understanding from your post is that you have NO EVIDENCE of power on your phone whatsoever - meaning no lights - if so and what i have suggested to you does not work - then you will have to take it back to whom ever you purchased it from and hope the warranty works.
You did not indicate:
1. where you are located
2. who your carrier is
3. what you had on the phone before you flashed
4. what you tried to flash to
You also did not indicate if the phone was SPL'd before you flashed?
(Not that ANY of those things matter if you have no power on the phone as no recovery can occur if you really need a "resurrection"
Bill
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Keiser
No lights what so ever. It had SPL'd on it I flash a new rom and when it finish that was it. The carrier is Cingular in New Jersey. Also I bought it from a person, not from a store. I took the battery out over night and nothing, still no lights. I guess is dead. Thanks
sinverguenza said:
No lights what so ever. It had SPL'd on it I flash a new rom and when it finish that was it. The carrier is Cingular in New Jersey. Also I bought it from a person, not from a store. I took the battery out over night and nothing, still no lights. I guess is dead. Thanks
Click to expand...
Click to collapse
That sound you hear is the fat lady singing I am afraid my friend.
I DOUBT it - but you COULD try a new battery or play around with touching the battery several times to the circuitry (I have seen this in some of the other threads that talk about battery issues and charging issues - hey what have you got to lose?)
Bill
Maybe use it to keep a door open or build a fancy mailbox that kids won't kit with a baseball bat.
Yeah the no lights is bad.
Be honest here. What did you try to flash? What ROM?
sinverguenza said:
I need help, I finish installing a rom and when finish the phone wont start nothing comes. I even plug the charger and it does not even turn any light on. I try hard reset and nothing. Can anybody help or maybe is not good anymore. Or anybody could fix it for me. Let me know.
Thanks.
Click to expand...
Click to collapse
the person who can help has already responded: gsleon3. Explain your problem to him in detail and he can help you recover.
See people, take note: this is why its VERY important to read wiki/faq/stickies before doing anything to your precious and expensive devices.
Hello,
I've had my tilt for less than a year now. Today, my screen, when I turned it on, shook and while it was shacking, it was showing multiple lines on the screen. At the end, the screen was complete white. I can still make/receive calls, however, I wouldn't know what's going on since the screen was white. It seems to me it was a loose connection???? It got me extremely worried. I took off the battery, made a hard-reset, tried to physically move the screen, non worked. all of a sudden, the screen was fine. Later today, it happened again.
Can anyone please explain this problem to me and how to fix it. I would really appreciate that...
Thank you
Not sure what "shacked" means.
But given you are under 1 year, you probably have a warranty. Would be best to try and get a warranty exchange.
To have you dig around inside checking connection and voiding your warranty, would not be wise with an active warranty.
JimmyMcGee said:
Not sure what "shacked" means.
But given you are under 1 year, you probably have a warranty. Would be best to try and get a warranty exchange.
To have you dig around inside checking connection and voiding your warranty, would not be wise with an active warranty.
Click to expand...
Click to collapse
I'm sorry, I meant to say "shake". Anyways, My phone is unlocked and I bought it from ebay... currently using it in Canada
iamcanadian said:
I'm sorry, I meant to say "shake". Anyways, My phone is unlocked and I bought it from ebay... currently using it in Canada
Click to expand...
Click to collapse
Ahh Booo.
Ok, Find mikechannon's disassembly guides and wiggle all your connections. Sounds like a loose connection to me.
Hello,
Thanks for the reply, I dismantaled my device and made sure all the connections are fine. The problem still appears....
Ok Next Thing it, The LCD panel is "dieing" you will probably need to replace it.
JimmyMcGee said:
Ok Next Thing it, The LCD panel is "dieing" you will probably need to replace it.
Click to expand...
Click to collapse
oh damn
I noticed that when it happens, if I touched the OK and the end call button together, it would sometimes solve the issue. I would have to do it several times though. Is that any hint? are there screen related connections underneath those buttons?
Thank you for your continuing support, much appreciated!
OK, I've noticed that once I click on the call button, the white screen shows up. As I said, I dismantled my device and checked all the connections. However, I didn't go further than the 15th page, i didn't go further because I though that it wasn't necessary.. That's the websites of the tutorial I followed:
http://www.mikechannon.net/PDF Manuals/Replacing the LCD on a Kaiser.pdf
So the two connections I made sure they are properly in was the small and big one only like in the picture below....
Connection #1:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Connection #2:
Another view of Connection #2:
I appreciate any help possible.... Thank you all...
Thank you again for the continuing support
bump...
Please help as this issue is really bothering me. Anyhelp is much appreciated!
Those connections you have pointed out in those pictures are the keyboard ribbon connections....I think you might have to dismantle a bit further to get to the screen.
mic_888 said:
Those connections you have pointed out in those pictures are the keyboard ribbon connections....I think you might have to dismantle a bit further to get to the screen.
Click to expand...
Click to collapse
OK, I went further and was able to see the screen ribbon. I made sure the connections are in tight. However, after putting everything back, the problem still persist. Now, I'll be more than happy to buy a new screen IF it solves the problem... Please correct me if i'm wrong, doesn't seem more like a connection problem; maybe the chip that holds the ribbon cable is loose? In this case, it would need soldering???
Moreover, I noticed that the screen ribbon is underneath the talk button. Like I said before, touching the talk button solves the white screen*. Isn't that more proof that its not a screen issue?
I am very grateful for any advice...
Thank you
* Before completely dismantling the phone, it used to be touching the talk button brings the white screen problem, now its the opposite
WTF?! starting yesterday, every time my phone resets it completely restores my phone as if it's the first boot everytime! It's happened with 2 different roms. I'm eligable for an upgrade but I'm trying to hold out for the touchpro2 for att to come out... please advise!
WTF?!? starting today, i can no longer use my mind reading skillz!!!
plz post more information, ESPECIALLY when starting a NEW thread, ESPECIALLY when this is a common problem with quite a few new WM6.5 ROMs and ESPECIALLY because there is a known workaround listed in the FAQs of the affected ROMs. have you read those FAQs? have you read the threads for the ROMs?
Yes I have oh mighty computer nerd that sits at a keyboard and spits out insults so he feels better about himself! Turns out I have to get into a bootloader and run some program except that I also can't get into bootloader by holding down camera and power buttons.. another problem I've searched but found no answer to. Also after checking the kaiser FAQ and the FAQ for the rom I'm using I couldn't find the answer to this problem.. would love to try :
Procedure:
1. bring the device to bootloader.
2. Launch ActiveSync on PC
3. Go to connection settings
4. Uncheck the Allow USB Connection
5. Now, run mtty1_1_.42_538 on PC.
6. CMD>task 29
7. Flash the ROM of your choice.
And, Voila!!! the device is back to stable condition. (I hope)
As my device is running now on my own cooked ROM for the past few hours and no prob at all......
but like I said I can't get into bootloader. If anyone else has any ideas or can link me to a solution, I would love nothing more than to be proven an idiot and get my phone up and running.
ericmcintire said:
Yes I have oh mighty computer nerd that sits at a keyboard and spits out insults so he feels better about himself! Turns out I have to get into a bootloader and run some program except that I also can't get into bootloader by holding down camera and power buttons.. another problem I've searched but found no answer to. Also after checking the kaiser FAQ and the FAQ for the rom I'm using I couldn't find the answer to this problem.. would love to try :
Procedure:
1. bring the device to bootloader.
2. Launch ActiveSync on PC
3. Go to connection settings
4. Uncheck the Allow USB Connection
5. Now, run mtty1_1_.42_538 on PC.
6. CMD>task 29
7. Flash the ROM of your choice.
And, Voila!!! the device is back to stable condition. (I hope)
As my device is running now on my own cooked ROM for the past few hours and no prob at all......
but like I said I can't get into bootloader. If anyone else has any ideas or can link me to a solution, I would love nothing more than to be proven an idiot and get my phone up and running.
Click to expand...
Click to collapse
Well bootloader is hold in Camera button aprx 2-3 sec and insert the styli into reset hole and hold while keeping Camera pressed
And how is this an EMERGENCY!!!!! Someone dying from a heart attack is an EMERGENCY, not having problems with your stupid phone.
oh and the Tilt 2 comes out tomorrow.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Why in the heck would anyone come HERE with a Heart Attack Emergency...first they would have to do a search and read 75 pages of information about heart attacks, then, after having attempted 1934 different variations of CPR, the poor f***er is dead!!! Heck, all we had to tell him was "You can't do CPR on a duck."
i was flashing with a rom and i gotted bored so i turen off my computer now phone wont work adn idk how to fix cuz now i want phone for the phone to mak ework. i need phone to make my calls
how do i fix?
wats the point of flashing it just break my fone and why want to break phone anyways?
Assuming that you are flashing through your computer, if you turn off your computer then the phone cannot get all the data needed to successfully flash.
You'll most likely need to do this.
Power your computer back on.
Power your phone off and have the usb cable plugged in.
Hold the volume down button and press the power button (leaving the volume down button pushed) until you get tri-color screen and it should say USB at the bottom.
Flash the phone as you normally would.
Make sure to pay specific attention to all steps listed in the stickies when flashing your rom and never power down the data source.
Don't ask "what's the point in flashing", since the only reason your phone is messed up is because you screwed up and didn't follow the instructions.
You got bored during the flash and turned your computer off? It only takes a couple minutes!
redpoint73 said:
Don't ask "what's the point in flashing", since the only reason your phone is messed up is because you screwed up and didn't follow the instructions.
You got bored during the flash and turned your computer off? It only takes a couple minutes!
Click to expand...
Click to collapse
people that post like you make me want to go clean IN on you. But if you spent all day helping those that may have made small mistakes (like you never had) you wouldn't have a life. So it doesn't happen often. I just chose to acknowledge your ignorance (as i see it)
time to help someone waisted. spent to put them down...hope you got your phone fixed....
If you look at my posts, you will see I try to spend quite a lot of time helping people. But you chose to judge somebody based on one post.
The post above mine already told him how to fix it, so I didn't see the need to rehash.
Also, so many people on here spend tons of time making the stickied guides, detailed instructions in the individual ROM threads, FAQs, etc. that its a bit ridiculous when someone doesn't spend 2 minutes to read them, and then breaks their phone and asks silly questions like "what's the point in flashing".
I really hope this is just a troll post...
vHatch said:
I really hope this is just a troll post...
Click to expand...
Click to collapse
Agreed, this is kind of ridiculous. Even if this person had never performed a flash before, there is a progress bar displayed on the PC screen. It takes literally less than 5 minutes to flash. If this person got that bored in that amount of time, then he will probably be too bored to read the replies here to solve the problem.
It's like he's taken A.D.D. to the extreme.
bijan588 said:
i was flashing with a rom and i gotted bored so i turen off my computer now phone wont work adn idk how to fix cuz now i want phone for the phone to mak ework. i need phone to make my calls
how do i fix?
wats the point of flashing it just break my fone and why want to break phone anyways?
Click to expand...
Click to collapse
HAHAHAHAHAHA, you got BORED?? oh man.... way to go brother. i was gonna tell you how to fix it, but im wwaayy too bored
Ohhhhh boy..... Alright... If you got bored and turned your phone off WHILE it was flashing then it's nobody's fault but your own that you "borked" your phone...
Take the battery out and then put it back in. Turn it on and it "SHOULD" go to a tri-color screen known as the bootloader screen.
While it's in this screen, connect it to your computer and proceed to flash the FACTORY STOCK ROM for your phone. This should fix your phone...
That being said... Try to have a bit more patience and not get so "bored" while it's flashing. If you want to keep your phone as a functional phone and not a paperweight, you'll follow instructions next time...
Now... Before you get flamed any further...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}