Quick question - Hero CDMA Q&A, Help & Troubleshooting

Ok i did a search for whats the best ROM and it really didnt pop up with much so i figured i would ask, im fairly new to this all im running damagecontrol 2.08.1 my pri is 1.70_003 i guess what im looking for is there a better ROM that has everything working (or at least the big features) with sense as its launcher.
also my RA is 1.6.2 that i installed via freshkitchen is there a newer/better version i should use?
the reason i ask is because dmgcontrol is working fine except when i try to go in and change my USB settings to connect to pc settings crash, and the nexus live wallpaper doesnt load properly

I like Fresh but I am not sure how much longer it will be developed if at all.
This situation is one of the good thing about nandroid backup. Do a backup in recovery and then try out a bunch of ROMs. You can always go back to your original setup and if you did a lot of wipes then going back to that will help transition over to a new ROM you pick.

Related

Need help choosing rom

Hi guys I just recently did the "How to Root Sprint 2.1 Release for CDMA Hero" in the developers area and I need help choosing rom. I mostly use my phone to surf the net/update my FB/ check my gmail/ download music from music junk etc. I want to be able to do everything I normally do on a normal 2.1 updated hero minus the usesless nascar apps/footprints etc. I want to be able to have live wallpaper and be able to tether as well as save apps to my SD card.
Can you guys suggest me at least 3 separate roms that will allow me to do this? Each one I click seems tempting and really considering giving them a shot. I hear everyone saying do a NANDROID backup what is that exactly? Where do I go to see how to do this? I definitely need help. I also want to know how can I go back to my stock 2.1 sprint rom if in the end I just don't end up liking any of these modified roms (doubt it). I will try and keep browing and reading. Thanks guys for helping me out.
Try them all. It's the only way.
But how it's my question I don't see tutorials...I just wanna make sure I don't f up my phone. i have insurance but still i'm cautious about it. I was thinking this one
ALOYSIUS 2.1
Crown510 said:
But how it's my question I don't see tutorials...I just wanna make sure I don't f up my phone. i have insurance but still i'm cautious about it. I was thinking this one
ALOYSIUS 2.1
Click to expand...
Click to collapse
I just responded to your PM
I used the 1.5 Versions of Aloysius, it was good. Haven't tried the 2.1 versions.
Crown510 said:
I want to be able to do everything I normally do on a normal 2.1 updated hero minus the usesless...apps...
Click to expand...
Click to collapse
Question is, do you like Sense? If not, go for DarchDroid. (Unless you use MMS, then go for Ic3Rom). If you like sense, go for DamageControl.
Damagecontrol is a great Rom. Very stable and has built in UI program for disabling Sprint apps, launcher, live wallpaper or even sense all together. There's also apps2sd, JIT compiling, memkiller adjustments, dalvik to SD and swapping options. Just be cautious you don't change a setting without prior research to see what effects it will have on your system. I've been on DC for about a month now and can say this Rom is killer.
And as ALWAYS...do a nandroid backup before making any changes.
-------------------------------------
Sent via the XDA Tapatalk App
To do a nandroid you will need a program that can flash a recovery image (allows you to boot up your phone without your OS). I have ROM Manager. But there are others. Once you have flashed a recovery image, backup your OS. This will do a complete backup of your device, so you can always restore where you previously were. I would also recommend making a copy of your backup to your computer HD for safe keeping. Android Police has a couple excellent tutorials on accomplishing this.
-------------------------------------
Sent via the XDA Tapatalk App
Personally, I recommend Fresh. Simple, it's got everything you need, and it just seems to work better than DC on my device. DC had some issues with su and felt slow to me.

[Q] Some hero rooting/rom questions.

Ok so this is my first post here, and I'm sort of a noob so I'm sorry if these questions are too noobish...
First, I rooted my HTC hero last night, but I tried to install the rom (fresh 2.3.3) before wiping so I got stuck in this perpetual loop of the startup screen, had to wait until the phone ran out of battery and then did a wipe of data/ext and rebooted. Everything worked fine from there, and it seems to be working normally, BUT I'm wondering if this means everything installed correctly, or if I should just go through the process again.
Second, when I connect my phone to the computer I notice that I have the .zip of the image still in my phone's root. Can I delete this or is it necessary for the phone's function?
Third, are there any other roms people would suggest? I like vanilla android (not a sense fan), and I heard of a rom called Darchdroid. I was wondering how this stacks up to fresh 2.3.3...I'm looking for the smoothest experience possible (not a fan of the minor lag that happens in fresh)
And fourth, if I decide I want to get rid of Fresh and try a new rom, what is the procedure for wiping my phone clean and installing the new rom? (sorta noobish I know...)
Dr. Falken said:
Ok so this is my first post here, and I'm sort of a noob so I'm sorry if these questions are too noobish...
First, I rooted my HTC hero last night, but I tried to install the rom (fresh 2.3.3) before wiping so I got stuck in this perpetual loop of the startup screen, had to wait until the phone ran out of battery and then did a wipe of data/ext and rebooted. Everything worked fine from there, and it seems to be working normally, BUT I'm wondering if this means everything installed correctly, or if I should just go through the process again.
Second, when I connect my phone to the computer I notice that I have the .zip of the image still in my phone's root. Can I delete this or is it necessary for the phone's function?
Third, are there any other roms people would suggest? I like vanilla android (not a sense fan), and I heard of a rom called Darchdroid. I was wondering how this stacks up to fresh 2.3.3...I'm looking for the smoothest experience possible (not a fan of the minor lag that happens in fresh)
And fourth, if I decide I want to get rid of Fresh and try a new rom, what is the procedure for wiping my phone clean and installing the new rom? (sorta noobish I know...)
Click to expand...
Click to collapse
a bit noobish myself, but I think I can answer a bit regardless, anyone feel free to correct me...
1: if everything is working, great! if you dont feel comfortable, and dont mind resetting everything up, go ahead, do it again, cant hurt. whenever reflashing/new flashing, Dont Forget to make a nandroid and wipe! (and you can rename the backups in USB disk mode so you know which ones are what, otherwise go by the embedded date in the autogen'd title. in the nandroid folder on your SD card btw)
2: as far as I know, leave it?
3: HUGE fan of Darchs work, cant go wrong... keep in mind it does not have VisVoicemail in it, fix flash needed.
4: reboot into recovery, make a nadroid backup, WIPE!, flash the new one according to cookers intructions! done! (if ya dont like it, buggy, nandroid restore back to your last good one you did like!)
well I reinstalled the rom and wiped first...and everything is running way smoother than last time. I don't know what in the world happened or what was going on but I'll take it as it is

[Q] on flashing rom to rooted phone

Hi all, I'm going to not try and sound too noobish, but after reading for hours I still have a couple questions. I have a Moto Droid with 2.2 Froyo that I just rooted. I use Rom Manager last night to put on Cyanogen but when it booted I had lost all apps, contacts, market so I reverted back to stock. I just got titanium backup pro which I read should load all my apps/contacts etc once I load Cyanogen? I just want to make sure I'm running the programs in the correct order.
One other issue I have is that I am currently using Setcpu to overclock to the max it's allowing which is 800 megahertz. Do I need to uninstall this before I load Cyanogen? Because I know that it is going to max me out at 600 unless I load another Kernal to go higher which I would like to do, which is another thing I was looking for instructions to do but having difficulty at least for my model.
I've found some P3 kernals, I'm not sure if theyre compatible with Cyanogen or how I would know which one to get though.
Any help is appreciated, I'm new to the rom stuff but learn fast.
oh man, I was hoping someone would know
anyone? please?
Allright well I've figured out which P3 kernel I am going to use. My latest issue is when I install Cyanogen, all my apps except for Rom Manager and Terminal Emulator are gone. Now I backed up everything with Titanium, but that is gone as well. It seems like a catch 22 to try and restore your apps and the restoring app itself is gone. Any ideas?
Go download titanium from the marketplace and reinstall. Your apps will then be able to be restored. I run cm 6.1 RC4 and use the P3droid 250/1100 MHz kernel. You'll also want to install setCPU from the marketplace to set the cpu speed profiles. Good luck! You'll really dig it once you have everything dialed in.
----
Sent From My AI using my own mediocre intelligence.
Hey Maxnicks, maybe you know the answer to this one as well:
I've only been using CM since 6.0 and I want to finally update it to 6.1 but just a few questions. As far as updating goes, do you have to wipe your data in Rom Manager like you would do going from stock to CM? 2nd, when you update, do you lose all your apps like you do going from stock to a new rom? I used titanium backup before to restore after 6.0, but this time I'm going to update the rom through Rom Manager so it's a little different. Last,I have the P3 Kernal overclocked, will this stay at my current settings or do I need to reinstall it after 6.1 is on there. Sorry for the questions but I tried googling and not much exists comparing CM update vs installing it over stock.
First make a back up of current rom in rom manager in case want/have to flash back. When updating same rom, might be able to get away without wiping, try without if any trouble with 6.1 flash back to previous then try a wipe. On kernel you will have to go into recovery to flash back to the p3 as all roms come with one, usually top out at 600/800 or so. Once flash new rom with gapps all apps should download thru market. I currently am running 6.1 with p3 125-1100 kernel with no problems other than usual launcher re-draw. Good luck
Sent from my Droid using XDA App

Custom Rom help!?!

I have tried a couple of custom roms and they have all worked fine at first but then after a while most of them would do something like force close whenever i try to open anything. This is getting really frustrating. I have a build 1009 and im looking at phoenix 3.0 and perception 10.0 both look really nice. Could someone tell me what im doing wrong and how to fix it. Every time i try to enable third party apps recently or something else ( I can't remember specificly what it was but it was rooting it or something) it will do the blah blah something apcore stoped working force close so right now im just going to use my phone on stock firmware and use it like normal and see what happens but could someone help me. I have used gingerclone, Assonance (force close problem), Darky 8.0 with the captivate workaround (force close problem), and maybe a few others but those are the only ones i can remember.
Custom roms are rooted with side loading enabled. So if you are trying to do this after you have the rom loaded, that could be a problem. I also would like to know what you are restoring on these roms. Should only be user apps.
To pin point your problem please provide more detail
I have put apps from custom roms onto the stock rom and other roms. Could that be the problem? And also this is what im going back to.
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
Im only doing the first part im not going to jh7. would that have something to do with it. Any help is greatly appriciated.
yamato2 said:
I have put apps from custom roms onto the stock rom and other roms. Could that be the problem? And also this is what im going back to.
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
Im only doing the first part im not going to jh7. would that have something to do with it. Any help is greatly appriciated.
Click to expand...
Click to collapse
What apps?
I do not think only going back to jh7 would cause your issue. Tell me more about what you are trying to do to enable side loading, and why you are doing it on as custom rom
I had the ones i downloaded and i sideloaded one wireless tether app a long time ago then i backed it all up with titanium backup and i would install a custom rom and it would have roms preinstalled on it. I would want to put on a different custom rom so i backed up again and the flashed back to stock the to the new rom. and i would restore all the apps including the one from previous roms. If you are asking for the specifics it would take a while and about the side loading i followed the guide http://forum.xda-developers.com/showthread.php?t=738376 and did the method 3 it seemed to work fine until i rebooted and then it did the force close thing. And i didn't go to jh7 i went to jh6 or jh2 or something like that but im going to try going to jh7 and see if that helps.
dont restore ALL apps in Titanium Backup. safest option is "restore missing apps+data"
all the custom 2.2 roms have tethering/wifi hotspot built into them...no need for another app for it.
for custom roms, you DO NOT need to root or sideload...they are enabled by default on all custom roms.
Thank both of you for your help. I will probably for now only install roms specificly for captivate and with specific instructions.

[Q] Is Enoms 1.6 rom still the overall best for the G1?

After 3 years, I am still rocking the G1 as my MAIN everyday general use android phone. (Because honestly.. aside from a G2 HTC nothing has come out that really replaces the overall usefulness of the G1)
I still use Enoms 1.6 rom. I checked before about updating, but back then, everyone had gripes or issues, or slowdowns that didnt really make it worth updating from. Anyways, just checking on if anything is different now. For someone who uses a partitioned sd card, apps installed to SD card automatically (not just moved) and so, is there really something worth upgrading to or is enoms rom still overall the better stable rom for us G1 users? Thanks. =)
you will always get the best speed and stability out of donut roms, there are lots of good ones to chose from so take your pick there. if you want to stick with 1.6 then you still might consider the 2708+ updated radio/spl that allows for 14 more megabites of ram, you will definitely notice this! after the update just reflash your rom and a compatible kernel over it.
there nice 2.1, 2.2, and 2.3 roms out there, plenty good enough for a daily driver but there are some lags compared to any good donut rom. if you want a taste try froyobylaszlo if you like it than there are lots more new roms that compare well to that.
2708+ updated radio/spl?
Usually I have about mid 20s-30 for memory free. Which seems decent for the most part, since everything else runs off the sd card. Only reason its lower since I use that compcache stuff.
As for the info, thanks, yea, figured donut is still better least for a every day use and general purpose.
Pls don't mix up RAM and internal memory. Internal memory is comparable to the hard disk of your PC, while RAM is memory which is used for executing programms.
The 2708/0013d combo will give you more RAM (112MB instead of 97MB), so most likely you can renounce on using compcache, but you will need an adapted kernel otherwise you will get bootloops.
Sent from my Gingerbread on Dream using XDA
Ah ok. Is enoms rom able to work with this new spl? Not even sure what would be the best way to do this.. Nandroid backup, flash new spl, and nandroid restore?
always do a nandroid.
the method i would do is backup everything via titanium backup, back up any sms or my call log via sms backup +, then i would make sure i have all the requirements and then flash the updated radio and spl. after this i would flash whatever rom i choose (stick with your donut if youd like) then i would flash rom and a compatible kernel over it, reboot, restore and be happy. also i would make sure i have all the files i need ahead of time, this being amon_ra (may need it) radio, spl, orange.nbh (in case of emergency) my rom of choice, and kernel of choice (if needed)
this is the way i'd go about it, you can try any method youd like there are tons of threads about this update so i would recommend reading a few first
oh and even if it sounds complicated its well worth it
I know, G1 was the 1st I ever did heh, now I do alot of em, The others I dont stress about as they arent my main everyday device.. I am just protective of my G1 lol.. My main device.
Does anyone know of enoms works on this new spl radio.
hanvet used enoms with the new radio/spl but i have used other 1.6 roms with it so im sure this will be fine too. just make sure you flash the appropriate kernel over the rom. if you take a look at ezterry's thread on kernels or even on the 2708+ page you will find plenty to choose from
Mysticales said:
I know, G1 was the 1st I ever did heh, now I do alot of em, The others I dont stress about as they arent my main everyday device.. I am just protective of my G1 lol.. My main device.
Does anyone know of enoms works on this new spl radio.
Click to expand...
Click to collapse
Yes, it works. I've tried it just some minutes ago. Not sure if everything works, because I did only a quick check, but it's booting, you can log in browser is working, ...
The only thing you need to do is flashing a different kernel which supports the 2708 radio on top of the ROM. I flashed Terry's BiffTest Kernel but also the newer one should work.
If you like to get some more internal memory you could also use MTD-Partitions set to [67,2] which would give you a data partition size of almost 145MB
Btw.: I suppose I could not run such a ROM as my daily driver, it looks like it's already 10 years old ...
Hah found better rom called supertinhte 2.2 rom. Based on T-Mobile myTouch 3G.
Very Very fast ,comes with 82.19 free internal space.I think it is faster than froyo by lazlo with ramhack. Type it in google cant post link cause i am new here
I really like two [email protected] ROMs on my two G1s. I use them as my daily drivers.
I use SuperFroyo on one and I use SuperCDSIv4 (Donut) community edition (looks soooo much better than Mlign, etc...) on the other.
They are both great. I uninstalled virtually everything from SuperFroyo that I could. I can verify that you have no issue with deleting Talk, News and Weather for sure. Also, if you use another keyboard, you can delete the android keyboard. I did that on another installation. I delete stuff to have all apps internal.
SuperCSDIv4 is a little faster most of the time, but the niceties of Froyo are good too so I use and really like both. I recommend Lightning Launcher, then unistall ADW and LauncherPro if you go with Superfroyo. That launcher is hard to set up, but it is really light. Just go into themes and select "Zune" and try that. It is a cool theme and fast.
I think 2.2 is more fit for G1. some apps can't work on 1.6 ROM
True but the fastest 2.2 is slower then the fastest 1.6, if all you need is speed then donut is the way to go. You can push some apks onto donut roms that aren't found in the market but if you need some apps and other things froyo offers then you may need to move up
Sent from my HTC Vision using xda premium
Apps for 2.2 arent really needed on the G1 screen, cept maybe those Authenticator apps. I have a diff android if I need those higher end apps.
I am a very proud G1 user too!
But I will suggest going too the CyanogenMod 5 Mod. With the proper tweaks, it reallly runs like a charm. Super E and Super F are also good ideas. Just google them up and look how to install them!!!!
So are people still using the volume increase thing for their G1 as well? I rem using the script and so to tweak that.
To be honest this GinSense rom is very fast and stable, its 2.3.7 using a cyanogenmod base.
There is that one problem with watching movies on it (were the sound keeps going but the video resets) but that's because its a problem with the cyanogenmod base, I know because every cyanogenmod rom I had, had this problem.
I would go to a 1.6 for speed, but then I would lose out on all the apps, and this is a quite snappy rom.
Sent from my GinDream/GinMagic using XDA
So question, to flash that ram increase radio. I could do that and do a nandroid restore afterwords?
No I'm pretty sure you would need to flash your rom again from scratch and then flash a compatible kernel over that
Sent from my HTC Vision using xda premium
Well I see the kernel in this thread I should be flashing, but I am very confused. Ok, my SD card has its apps installed to it, the rom auto uses it for storage. I dont know if I should just be relying on Titanium backup for a backup and restore or nandroid.
Im "open" to the idea of upgrading the rom if its speedy. I just dont wanna lose all the apps and work I had on this rom already. Just so confusing atm. Been a LONG time since I had to flash or work with the G1. (Never need to mess with something that works flawless) My other androids I flash the **** out of and update heh. My g1 is my baby, so always was careful. I wouldnt mind that extra ram tho if it really helps.
So what do you all think is the best way to secure keeping my stuff and easily update this?
Edit: Gonna be basing my study off this. http://forum.xda-developers.com/showthread.php?t=831139
Just wondering how my apps 2 sd will be, since on Enom, I did this the old school way and not the apps2sd thing. Which makes me think Titanium backup is the best way to restore apps on to a new rom (without data or should I be able to backup with data and restore with data, so used to not restoring with data)
Edit 2: Ok is is possible to do this, based on that thread. I use nandroid to backup, then do the steps, restore using nandroid and before I boot into the phone, I flash that biff any kernel thing, THEN reboot into the phone. Would that work and not lose anything?

Categories

Resources