I'm trying to unroot from Cyans latest.
I'm following these instructions
[HOW TO] UNROOT, get phone to STOCK firmware
After I formated to FAT32 and placed the original SPL (renamed to update.zip) and DREAIMG.nbh on root of sdcard.
I get into Cyans 1.4 recovery. When I hit [ALT+S] Apply update.zip
I get E: Can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0)
(Invalid argument)
E:Can't mount SDCARD:update.zip
Installation aborted.
Any help please?
Go back to your PC and make sure it is really update.zip. if you don't have your file extensions turned on, it may really be update.zip.zip.
I'm sure its update.zip. I'm on a mac and I can see my file extensions.
CaliLove310 said:
I'm sure its update.zip. I'm on a mac and I can see my file extensions.
Click to expand...
Click to collapse
If you go to choose .zip do you see the file listed there?
You did say you're using cyan's 1.4 recovery, right?
rp1783 said:
If you go to choose .zip do you see the file listed there?
You did say you're using cyan's 1.4 recovery, right?
Click to expand...
Click to collapse
Yes, CyanogenMod v1.4 + JF
When I click on apply any zip
I get the same error message
E:Can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0)
(Invalid argument)
E:Can't mount SDCARD:
CaliLove310 said:
When I click on apply any zip
I get the same error message
E:Can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0)
(Invalid argument)
E:Can't mount SDCARD:
Click to expand...
Click to collapse
That sounds more like a problem with your sd card tham the file itself. I would try to format your FAT32 partition again. I know you already did it, but I can't see another reason, unless the file ext is wrong, which we've already established it's not.
rp1783 said:
That sounds more like a problem with your sd card tham the file itself. I would try to format your FAT32 partition again. I know you already did it, but I can't see another reason, unless the file ext is wrong, which we've already established it's not.
Click to expand...
Click to collapse
If I place it into a card reader, I can see it perfectly. Also, if i place it into a spare G1 I have, I'm able to mount it and see the files perfectly.
I have this particular sd:
A-DATA 8GB Micro SDHC Flash Card Only Model MicroSDHC 8G card
CaliLove310 said:
If I place it into a card reader, I can see it perfectly. Also, if i place it into a spare G1 I have, I'm able to mount it and see the files perfectly.
I have this particular sd:
A-DATA 8GB Micro SDHC Flash Card Only Model MicroSDHC 8G card
Click to expand...
Click to collapse
Is the spare g1 rooted? If you have a "recent" custom recovery on that phone, I would try the apply any .zip and see if it lists the file.
rp1783 said:
Is the spare g1 rooted? If you have a "recent" custom recovery on that phone, I would try the apply any .zip and see if it lists the file.
Click to expand...
Click to collapse
Yes, my spare G1 is running the same, Cyans latest, with cyans 1.4 recovery. I tried the same SD card on the spare on and it also gives me the same error as the other phone.
Format FAT32 again, re-download the SPL and try again. The issue has to either be with the SD card or the file.
rp1783 said:
Format FAT32 again, re-download the SPL and try again. The issue has to either be with the SD card or the file.
Click to expand...
Click to collapse
Thanks alot for your help. Wish there was someway to thank you.
I reformatted the SD through windows XP in my bootcamp side.
That worked, I guess it doesn't like Apple's FAT32 formatting.
CaliLove310 said:
Thanks alot for your help. Wish there was someway to thank you.
I reformatted the SD through windows XP in my bootcamp side.
That worked, I guess it doesn't like Apple's FAT32 formatting.
Click to expand...
Click to collapse
Well you're more than welcome to DONATE Although, your thanks is enough.
You don't need to go through all that. just put the RC29 image on the root of your phone and press power. As long as you don't have a custom bootscreen, everything will be replaced
Most of the people are complaining about I9000M internal sd card.
After flashing the original firmware, you stuck on S logo of i9000M .
Does it indicate the sd card failure or it can be another problem.
How can you confirm that your internal sd card has gone.
:/
go into recovery mode (volume up + home + power)and if it shows below, then your internal is gone
E: can't mount /dev/block/mmcblk0p1
(no such file or directory)
E:copy_dbdata_media:cant mount SDCARD:
copy default media content failed.
Hello
I have a problem with my N1. It happened while flashing a custom rom - what caused it, I don't exactly know. The problem is, that now, my N1 wont boot. When i turn it on it is just stuck at the 4-colored X. I can boot into recovery and everything, but it can't mount my sd card from here, all i get when trying to do anything related to the card is this message:
E:Can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0)
(No such file or directory)
E:Can't mount /sdcard
All my phone can do now is to get to the bootloader, recovery and fastboot. I'm unable to install a new rom or a new recovery. Actually i'm unable to use my phone for anything.
Hope you guys can help me out
Did you do the obvious and try another SD card?
Or try and fix sd card errors or just full wipe the card??
Yeah, i did try another card and got the same message. Both cards works fine when i tried them in another phone. And yes i did try and wipe the card as well.
You can go to Amon/Mounts and mount card or try a repair sdcard
If you have backup of card, I would reformat (sdformatter) and repartition
Do you use Temasek's System Only Wipe zip between new roms in addition to data/cache wipes?
Hi guys,
I've tried sideloading some stuff onto my device, but constantly get an error from adb:
" failed to write data 'protocol fault (no status)' "
After some searching I found this was because CWM cannot mount sdcard, so I went into mounts and storage and tried mounting sdcard, and it didn't work.
I've tried updating CWM but that didn't help =[
Why can't it mount sdcard? =[
I recently bought a Galaxy Tab off of eBay with the seller saying they couldn't get it to get past the bootloader thinking I could fix it. Easy right?
I've been working on this thing for over 3 hours trying to re-partition and flash the stock firmware via Odin and it's getting me nowhere. After installing the stock firmware I get stuck in a bootloop on the main screen. Recovery says:
E:format_volume: rfs format failed on /dev/block/mmcblk0p2
when trying to format all the partitions, thus it cannot mount any filesystems:
E:Can't mount /cache/recovery/recovery_kernel_log
E:Can't mount /cache/recovery/log
E:failed to mount /cache (No such file or directory)
... etc
I've come to the conclusion that my SD card is dead. I have an extra micro SD just laying around, is there any way I can force the tablet to use the external storage as the internal storage so I can revive this thing?
what tab model?u have repartitioned the tab that's why the internal is gone