Database Develop

CyanogenMod v4.0.1 Question?

It states in the relases notes that "Not vulnerable to the "one click root" exploit"!
Is he talking about Recovery Flasher that was just leaked/released.
Basically can i use Recovery Flasher and then Flash this Rom right after with No SPL Change or Radio Change From a Never Rooted Phone

What it means is that kernel was patched against this volunerability. You can flash recovery and then this rom but if you were to try using one-click afterwards it would not let you since cyan patched it. Shouldn't matter though cause if you're flashing this rom you already have root.

answer
He is talking about the kernel vulnerability that allows the one click rooting program to work.
If you don't have a rooted phone and have received no patches or security updates from your carrier, then you are able to take advantage of the vulnerability with the one click root program because if you will flash 4.0.1 after you exploit the kernel vulnerability.
I would suggest upgrading to the hard spl or engineering spl at the very least and the danger spl only if you plan to run a hero ROM. I would also suggest upgrading to the latest radio so you can take advantage of improved wireless capabilities (ie better reception, bluetooth etc)

Thanks Both of you im thinking of rooting but dont know if it would be worth it since last time i did i got a brick but i was so dumb and full of myslef after rooting i flashed the danger spl without upgrading the radio and just booted up my phone without going into recovery
Sorry Direct i found the semi relevant post to this one that you were helping out a bunch of noobs

No problem, hope you found what you were looking for somewhere at least.
You might want to take a look at nephron's latest guide. It is really n00b friendly, well written, and updated with all the latest tips and tricks that everyone has amassed since October and months of rooting/modding.
Check it out and good luck.
http://forum.xda-developers.com/showthread.php?t=548924

DirectMatrix said:
No problem, hope you found what you were looking for somewhere at least.
You might want to take a look at nephron's latest guide. It is really n00b friendly, well written, and updated with all the latest tips and tricks that everyone has amassed since October and months of rooting/modding.
Check it out and good luck.
http://forum.xda-developers.com/showthread.php?t=548924
Click to expand...
Click to collapse
Omg awesome thread cover just about everything including sd partitons which is what ive been searching for thanks alot

Original question(s) seem to be solved.
Closing thread

Help a newb get on his way w/ Rooted G1

My G1 is rooted and I have updated it to RC33. (during the process, I used HARDSPL)
1. If I plan on using a theme from Drizzy (champion V2) do I still need to do the cupcake update AND the radio update?
2. Is installing this theme as simple as renaming the .zip to "update" and dragging it to SD card. THEN, do I Alt+W, or only Alt+S when I get to restore screen?
Please help if I am way off.

stevedawg85 said:
My G1 is rooted and I have updated it to RC33. (during the process, I used HARDSPL)
1. If I plan on using a theme from Drizzy (champion V2) do I still need to do the cupcake update AND the radio update?
2. Is installing this theme as simple as renaming the .zip to "update" and dragging it to SD card. THEN, do I Alt+W, or only Alt+S when I get to restore screen?
Please help if I am way off.
Click to expand...
Click to collapse
If you are going to use a theme, you need to make sure the theme is intended for that specific rom. You should always update your radio, without updating it you will have BT problems and possibly dropped calls. If you have Cyanogens recovery 1.4 you don't have to rename anything to update any more cause it can flash any .zip file. And you don't have to wipe before flashing a theme.

Thanks for the help.
How do I find out which rom I have and which rom's the .zip support?
I followed a youtube tutorial from anthonymoreno24 and these are the files I used:
Recovery image & HARDSPL from:
http://koushikdutta.blurryfox.com/G1RootWalkthrough/
I will update to cupcake during lunch (I have to use friends SIM cuz I have no data plan )
--------------
EDIT:
Just found this, do I follow these instructions after I update to Cupcake?:
Download image (right-click, save as): http://n0rp.chemlab.org/android/cm-recovery-1.4.img
MD5Sum: f5135a878c705215f4012786e4261cfe
To install image: copy it to your sdcard and run:
Code:
flash_image recovery /sdcard/cm-recovery-1.4.img
If you have problems with a "no space on device" error, try using fastboot and erasing first:
Code:
fastboot erase recovery
fastboot flash recovery cm-recovery-1.4.img

So have you not even loaded any rom yet? If you go to about phone under settings whats the info say?

Sorry, Im a newb, I'm literally following step by step instructions from the youtube vid
FW: 1.1
baseband: 62.33xxxx_1.22xxxx
kernel:2.6.xx-xxx-gfea
[email protected] #1 (kool!!! just noticed this )
Build: kila-user 1.1 PLAT-RC33 126XXXX-xxxwordsxxx
This help? what specific info you need?

Bud, you are a long way off. Drizzy's is not a theme, it is a hero rom which I would not suggest you try since it needs the danger spl and I can see a brick happening already, download cyanogen 4.02 rom and flash that and stick with it before you consider anything else, read the sticky's at the begining of each forum here to get an idea of how android works instead of relaying on a couple month old out of date video. A lot has changed since that was made. Oh and make sure that your file you want to flash is in the root of your sdcard and not in a sub folder otherwise it won't work, biggest thing make a nandroid backup in cm-recovery 1.4

gridlock32404 said:
Bud, you are a long way off. Drizzy's is not a theme, it is a hero rom which I would not suggest you try since it needs the danger spl and I can see a brick happening already, download cyanogen 4.02 rom and flash that and stick with it before you consider anything else, read the sticky's at the begining of each forum here to get an idea of how android works instead of relaying on a couple month old out of date video. A lot has changed since that was made. Oh and make sure that your file you want to flash is in the root of your sdcard and not in a sub folder otherwise it won't work, biggest thing make a nandroid backup in cm-recovery 1.4
Click to expand...
Click to collapse
Took the words right out of my mouth.
OP: If you want to flash anything hero related you need to read read read, if you are asking questions like this, and are this confused then you shouldn't/aren't ready to go hero. Try cyanogen or jacxrom (if you want a different look, it has a nice theme built into it) and after a week or 2 of studying them give hero a shot.
Has anyone else noticed how many people have been posting sh*t like this lately? It seems like noone can read anything anymore and wants us to give them specialized instructions instead of using the GUIDE's like we all did.

crpercodani said:
Took the words right out of my mouth.
OP: If you want to flash anything hero related you need to read read read, if you are asking questions like this, and are this confused then you shouldn't/aren't ready to go hero. Try cyanogen or jacxrom (if you want a different look, it has a nice theme built into it) and after a week or 2 of studying them give hero a shot.
Has anyone else noticed how many people have been posting sh*t like this lately? It seems like noone can read anything anymore and wants us to give them specialized instructions instead of using the GUIDE's like we all did.
Click to expand...
Click to collapse
Agreed. I've noticed that people are like how to I root!?!? I'm such a n00b. There is plenty of literature out there and should learn how like the rest of us did. If you need to be babied into root maybe you shouldn't have root.. or let someone else do it.

agreed
I rooted my phone a couple months ago without asking any ?s, I have still not asked a ? Yet, before I even got my phone, I studied up on it, there is a ton of info and a lot is in the stickysand has been covered countless times. Now it is even easier to root and flash your phone than ever but the problem is people are following videos and blogs that do not provide enough info. I was lucky to find xda back when I had my wing so I knew right were to go from the begining. If people just took notice to the info here they would have no problem at all

gridlock32404 said:
I rooted my phone a couple months ago without asking any ?s, I have still not asked a ? Yet, before I even got my phone, I studied up on it, there is a ton of info and a lot is in the stickysand has been covered countless times.
Click to expand...
Click to collapse
I completely agree, I too read the tutorials many times before I got my phone !
And when I got the phone, I invested almost 2 days ( around 20 hrs) to try different things (Thanks to all for providing guides to everything) and now I am running a fantastic ROM with root.
It feels much better now that instead of asking "How, Why,etc), I am writing "THANK YOU ALL" for fantastic guides and tutorials !

crpercodani said:
Took the words right out of my mouth.
OP: If you want to flash anything hero related you need to read read read, if you are asking questions like this, and are this confused then you shouldn't/aren't ready to go hero. Try cyanogen or jacxrom (if you want a different look, it has a nice theme built into it) and after a week or 2 of studying them give hero a shot.
Has anyone else noticed how many people have been posting sh*t like this lately? It seems like noone can read anything anymore and wants us to give them specialized instructions instead of using the GUIDE's like we all did.
Click to expand...
Click to collapse
FYI, JACxROM requires Haykuro's SPL to run properly as well. If you're using the HardSPL, then your best choice is Cyan's 4.03 or enomther's rooted version of the stock Cupcake CRC1 build.

my bad, I guess since I flashed haykuros spl and the new radio when I first rooted I never relized you needed it for the xrom.

crpercodani said:
my bad, I guess since I flashed haykuros spl and the new radio when I first rooted I never relized you needed it for the xrom.
Click to expand...
Click to collapse
Yeah, actually even the devs didn't realize this until a couple of us did some experimenting. Fortunately, I had two G1s and the only difference with them were the SPLs... one worked and one didn't.

[Q] I need some advice on updating my G1.

So I just picked up an original T-Mobile branded G1. It's got the stock 1.6 firmware on it now. I would like to try running 2.2 on it but I have absolutely no idea how to go about it.
So far I have determined that there are more flavours to choose from than at a baskin robbins. I'm also completely lost when it comes to radios, kernals, bootloaders and other things expressed as three letter acronyms.
Could anyone suggest a good solid 2.2 firmware and the specific supporting bits and pieces I will need to make it work? I really want to see this phone shine.

Like everything else, read the development forum on the ROM. Do a research on what each ROM will do. Some ROM needs a specific SPL (HBOOT) and radio in order for it to work properly. As you already know (from your post) there are many different flavor of ROMs. Some deal with speed, and performance. Other deal with functionality of the apps. Most of them if not all are on 2.3 at this point.
You will have to sit down and read the instruction once you decided which ROM you wants.
Most everyone love Gingerbread series (specifically Gingerbread Yoshi and ezGingerbread).
I, myself, started with CM 6.0.0 RC1 (2.2) and after it crashed on me I end up loading SuperAosp DM 2.8.2 (with 2.3 on it) with the recommendation by one of the member here. It is fast performance, and that what I need.
So, you'll have to decide what you want to do with your G1 before you flash it with a custom ROM.

I have done this, this week end.
Here there is a post about the ROM
http://forum.xda-developers.com/showpost.php?p=4647751&postcount=1
and this one for the radio i find
http://forum.xda-developers.com/showthread.php?t=640535
i suggest you to do a Nandroid backup before, and format your SDCARD ( i didnt done this, but i read about some problems to install the rom) and you will reboot your device after changing Recovery and After flashing the rom. and htc logo take a while befor showing cyanogem mod.
tell here if you find problems

So everyone says good things about http://forum.xda-developers.com/showthread.php?t=811620. It seems a good place to start. But I'm still a n00b. What, precisely, do I need to do with my bone stock (But unlocked) G1 to install it? Do I need to root it first?
"If you refuse to upgrade or can't upgrade because you have a 32a (1.2 or classic) device: you will need an alternative kernel as described in step 4.b 4.c or the phone will not boot
Note: 2.22.27.08 will also work but is not how the ota was shipped
* Uesrs of other SPLs can either use Danger (dream only), any sapphire SPL on the magic/sapphire/MT3G or alternatively Custom MTD I recommend "87 2" (system/cache) {as of test3 06bindcache will work if you install the parts package, thus if you use CustomMTD parts is mandatory to avoid market issues} "
Does that just mean I need http://forum.xda-developers.com/showthread.php?t=831139? Then why does it say "Please note this includes my 20101106 - 2708 ported kernel"
What is an SPL? What's this about Danger? What's fastboot?
I'm much better with a soldering iron than software.

Jax184 said:
So everyone says good things about http://forum.xda-developers.com/showthread.php?t=811620. It seems a good place to start. But I'm still a n00b. What, precisely, do I need to do with my bone stock (But unlocked) G1 to install it? Do I need to root it first?
Click to expand...
Click to collapse
You will need to root your phone, if you want to flash custom ROM. Unlocking it is just so you can use it on other network.
BTW! I was a noob at this probably a week or so ago, when I first started to work on upgrading my G1. Now I am learning the rope and helping others.

Upgrading G1 from a 2 years ago

Hello all. I have been researching for about 3 days regarding the upgrade of the G1 to the new radio 2.22.28.25 and Spl:1.33.0013d so I can install [ROM][CyanogenMod 7.2.0][The Official "KANGED" CM7 for DS][11/24/2011] FINAL!. I have HSPL10.95.3000 and radio 2.22.19.26I and android 1.6 . I seem to have a problem with flashing via fastboot as it gives error " remote : partiotion does not exist " . Furthermore, I tried flashing the radio via recovery but it said that my SPL is not recognized so it is best that I flash it via fastboot . What should I do? I am afraid of bricking the device and I cannot flash any rom with the current settings ( I presume ). Any advice will be really helpful. Also, which one should I flish first , RADIO or HBOOT ? Also, IS Hboot same as HSPL? Thank you guys! Have a merry CHRISTmas.

Nobody out there willing to help?

jojo_angelov said:
Hello all. I have been researching for about 3 days regarding the upgrade of the G1 to the new radio 2.22.28.25 and Spl:1.33.0013d so I can install [ROM][CyanogenMod 7.2.0][The Official "KANGED" CM7 for DS][11/24/2011] FINAL!. I have HSPL10.95.3000 and radio 2.22.19.26I and android 1.6 . I seem to have a problem with flashing via fastboot as it gives error " remote : partiotion does not exist " . Furthermore, I tried flashing the radio via recovery but it said that my SPL is not recognized so it is best that I flash it via fastboot . What should I do? I am afraid of bricking the device and I cannot flash any rom with the current settings ( I presume ). Any advice will be really helpful. Also, which one should I flish first , RADIO or HBOOT ? Also, IS Hboot same as HSPL? Thank you guys! Have a merry CHRISTmas.
Click to expand...
Click to collapse
Read ldriftas guide in the dev forum
Sent from my T-Mobile G1 using xda premium

can you provide more details? what command did you type when trying to flash via fastboot?
but if you are on 1.6 like you said than your not even rooted so you have a lot of work to do

ldrifta said:
can you provide more details? what command did you type when trying to flash via fastboot?
but if you are on 1.6 like you said than your not even rooted so you have a lot of work to do
Click to expand...
Click to collapse
I am rooted, did it many many years ago and at that time only 1.6 was available as a good option.
I used " fastboot flash radio ........img" and It did not work... Any idea ?

what recovery are you using (amon ra? clockwork?)
also make sure you dont try flashing the most current radio/slp over what you have know, im under the impression if you do you will have at least a soft brick
dig through the forums and you are bound to find your answers. if all else fails right back and im sure i or someone else will help with your next steps

I believe I am using Amon Ra's ( Ra-dream-v1.7.0) recovery. That is what I am trying to figure out is to write over me existing SPL and radio so I can start updating to different roms. This is my stumbling block right now. I've searched for over 3 days in a row, and I see different ways to do it but I need answers whether , like you said, it will soft brick or brick my phone...

My recomendation is to start from the link at the end of my post. I'm not new to the G1,I'm kinda old hat from the JF days in the begining,but I basicaly used that thread to refresh myself on the G1 again. My advice is to read through the entire thread from the link at the end of my post,even tho it might take a while. For the most part,flashing the radio and spl isn't recommended through recovery,its better to flash through fastboot,but,I was on vacation and got bored and didn't have my laptop with me so I took a chance and it was fine,but that's because I had a very good idea as to how the G1 is configured. I spent a lot of time here in the forums back in the day. Just keep in mind,if you don't flash the right radio/spl combination,at best it won't boot the rom,at worst{which is more likely} you will brick your G1. Just some things to think about. Wes Garner over on Android Spin(I think that's the site),has a good page still up from back in the day,its the perfect guide going from downgrading to 29 and up to 1.6,just jump in from where you already are. Might not hurt to start over with the downgrade so you can make sure you don't mess up your phone. Sorry I don't have the link to his page at the moment,but when I find it ill post it. Something else i highly recommend is installing Droid Explorer,mainly because it sets up Adb for you and its mostly idiot proof for installing and works on Windows 7. I dont recommend using the Interface tho,there are some advanced settings with it where if you dont know what your doing it can deff brick your phone. If your comfortable with it tho check out all the options it has. It can flash recoveries,take screen shots,has an explorer to edit or delete files,and has a package installer for apk's. It can be tricky sometimes with a G1 because it was created for Moto Phones,but when you connect any Android Phone it starts ADB and has reconized every Android phone Ive connected to my laptop,so its a prettty good tool to have.Also,keep in this in mind,ive been playing with the Gingerbread Roms based on CM7 for the last week or so,they are all pretty laggy because CM7 isnt designed or supported officially from Cyanogen for the G1. The most stable and dependable for everyday use is CM6. The Gingerbread roms for pretty much (imho) proof of concept that the G1 can run them,but arent really a route id go if you want to use your G1 as a good back up phone. Anyways sorry to ramble on,i hope this info helps you out or anyone else with questions.
Droid Explorer Link:http://de.codeplex.com/
AdroidSpin Link:http://http://forum.androidspin.com...g-your-G1-MT3G-(easiest-method)-by-Wes-Garner
http://forum.xda-developers.com/showthread.php?t=983834
Ps. The Laszlo Rom is pretty awesome,been running it for a few days now and its pretty tight. Check it out for sure.
http://forum.xda-developers.com/showthread.php?t=929678
Sent from my HTC Dream using xda premium

Self-rebooting ROM's and solving it with an older ROM.

Hi all,
Since a view month i have an HTC Dream G1. I have bought it second hand aleady rooted.
It had Hero ROM on it. And it was awfully slow. So i have looked around and found an ROM (froyobylazslo) that supposed to be good combination of recent and pretty good working (ok speed) ROM. But it was still rebooting sometimes. So i looked around once more trying to find older ROM so that it would work faster and stabler. And came across ginger yoshi. Tryed it to. And it rebooted to sometimes. I also had downloaded older cyanogen builds. 4 and 5 but they dont boot up at all. Maybe it has something to do with the radio that i have on it or something.
Here are the things like radio and spl that i have on it:
DREAM PVT 32B SHIP S-ON
HBOOT-1.33.0013d (DREA11000)
CPLD-4
RADIO-2.22.27.08
Oct 21 2009,22:33:27
Any suggestions how i can get back to some older ROM? I guess it has no sence to unroot the phone to be able to do it? And i guess i just need some good radio version that would be compatible with and older ROM? Any Donut / or maybe Eclair stable ROM u can suggest i can install? Or what do i have to do to be able to install CM 4 or 5 on it?
Thanks in advance,
Nikolai

you have a ram hack created by your spl(1.33.0013d)
older roms will need a custom kernel flashed above them.
try searching for super e -- download this one
now search in the developers forum for ezterrys thread on the 2708+ update
here you will understand what you have and why you dont want to get rid of it (dont unroot or change radio/spl)
you will also find kernels that can be flashed over older roms
try the biffmodtestkernel
i feel you should be happy after this

basically this 2708+ thing i did myself, because fbl needed that. (it had something else before) But i dont clearly remember what it was again. ill check the super e (i think this is not the first time i hear about that).
cheers