Related
Anybody expereinced this problem with Kaiser?
My vibration alert sometimes (many times actually) did not stop until I manually press the power on/off button. I have set vibration on when I receive new email messages, etc. When a new email message came in, the device just kept vibrating (I can only stop it by pressing the power button). When it was working properly, it would emit just 3 intermittent vibrations instead of a long one.
Any advice on how to resolve this? Thanks.
I get same effect with push e-mail. After three or four e-mails it goes into infinite vibration and will not stop until I acknowledge that e-mail. Please, any suggestions really appreciated.
Yes, that's similar to what I have encountered. Anybody has any advice please?
Lol, sorry to laugh, but it reminded me of something that constantly vibrates
Any solutions for this? I have the same issue.
I've found that when the phone is on non-vibrate option but volume is turned down to min, the phone continually vibrates!
When in normal vibrate-only mode, it does the usual 3 buzzes!!!
Try it and see
I encountered the same issue with the Tilt.
Tilt Won't Stop Vibrating!!
Has anyone found a solution for this? As mail is pushed through, my tilt vibrates continuously until I hit the power button. This happens several times every day (and needless to say, it is very annoying).
Seems not much advices from the guru here .... or maybe this problem only happened to just a few of us?
For me, I still can't figure out the pattern. It just happened spontaneously so I can't really pinpoint at a specific fault or something. But I would be very interested to find out how come this problem is only bugging a few of us here .... hmmmm ...
I changed my settings when new email message received to non vibrate mode.
I'm also having this problem intermittently and it is very annoying. Please help on this one.
I am also having this issue but can't seem to track it down to a single set of circumstances.
I have the same thing - when volume is not set to mute and vibrate is on, it vibrates normally. When the volume is muted, sometimes, but not always, it vibrates continuously. I haven't found any kind of solution yet...
I have the Tilt with stock AT&T ROM.
I'm maybe just being stupid - but I can't get my diamond to vibrate when I get a text. I think I've set it correct, but its not working.
Using TouchFlo - I go into "Settings", then "Sound".
I press "Advanced", and then choose the "Notifications" tab.
From the "Event" drop down list I select "Messaging: new Text Message"
Then I tick the "Vibrate" box.
Is there something else I need to do?!
BTW - my ROM version is 1.37 if thats relevant
If you mean that your phone should 'wake up' and vibrate when you receive an SMS, then have a look at the 3rd point from the link below:
http://forum.xda-developers.com/showthread.php?t=398265
If it won't vibrate at all, and only will make a sound I don't know the answer. Hope this helps.
Thanks for the reply.
Unfortunately it won't vibrate at all on receiving an SMS.
Even if the phone is awake and I get a message it does nothing apart from a little green 1 appears on the messaging icon - and the directional pad light flashes.
The other thing I've noticed when testing this is that the phone takes about 5 seconds to actually start 'ringing' when getting a call!
p3eps said:
Thanks for the reply.
Unfortunately it won't vibrate at all on receiving an SMS.
Even if the phone is awake and I get a message it does nothing apart from a little green 1 appears on the messaging icon - and the directional pad light flashes.
The other thing I've noticed when testing this is that the phone takes about 5 seconds to actually start 'ringing' when getting a call!
Click to expand...
Click to collapse
Yep ive noticed that on mine as well...im running 1.37 rom uk spec diamond and it takes a good few seconds before my phone will ring when i have an incoming call. Annoying but liveable i guess..also my phone wont vibrate either when receiving a text as well...just get the alert and notification.
p3eps said:
Thanks for the reply.
Unfortunately it won't vibrate at all on receiving an SMS.
Even if the phone is awake and I get a message it does nothing apart from a little green 1 appears on the messaging icon - and the directional pad light flashes.
Click to expand...
Click to collapse
Mmm, bummer... Just tested it with my phone. I previously used the 'wake on SMS' edit, and now selected 'vibrate' and unchecked the sound alert for Messaging: New text message. It worked like a charm.
The other thing I've noticed when testing this is that the phone takes about 5 seconds to actually start 'ringing' when getting a call!
Click to expand...
Click to collapse
Same here, even with my previous HTC Wizard. I guess it has to do with WM devices in general!?
Hmmm... now I've just realised that my phone doesnt chime or anything when I get a text - despite me having a tone set.
I tried a soft reset - but this did nothing. I dont really want to try a hard reset as I will lose all my proggies etc.
I've maybe give the tweak above a try!
I've tried the above tweak, but I'm still having no success.
I'm getting absolutely no alert at all when i get a text message. With the tweak, the phone comes out of standby and the screen displays the message - but it won't chime or vibrate at all.
Any ideas?
A phone that won't alert me of a text is no use as most of my communication is through texting!
Finally resorted to a hard reset - which solved the problem.
Spent the last few hours reinstalling everything!!
Now time to make a sprite backup whilst I have everything sorted!
How to stop the light from flashing when you've missed a notification?
For example, when the battery reached 10%, it gets a low battery notification. Normally, if you press Dismiss, the light on the navigation control button will not flash anymore. But if you don't press Dismiss, the light will keep on flashing. However, if you wait too long or if your device is locked, you may miss the notification and the light will keep on flashing. How do you turn this off manually after you've missed the notification? I still want the notification to be enabled for next time, I don't want it disabled permanently, I just want to know how to press "Dismiss" again so that the light will stop flashing for this time.
Thanks.
Someone please help, thanks.
my diamond had the same problem.
what's even worse, when the battery reached 10% and i pressed Dismiss, the light on the navigation control button keep on flashing about every 30 seconds until i had it rebooted.
jackyking said:
my diamond had the same problem.
what's even worse, when the battery reached 10% and i pressed Dismiss, the light on the navigation control button keep on flashing about every 30 seconds until i had it rebooted.
Click to expand...
Click to collapse
What version of ROM are you using? I'm using the official 2.03 and as long as I pressed Dismiss, the light will not flash. The problem is, sometimes I will miss to press Dismiss. This also doesn't only apply for low battery, it's for any type of notifications, but some notifications such as missed call and SMS, I can still stop the flashing even if I missed to press Dismiss, I just have to open the missed call tab or read the SMS.
CE version 5.2.21109
rom version 2.03.109.1 CHS
radio 1.11.25.01
i'm using some kind of cooked rom from a chinese pda forum.
now i can see that this seems to be a bug from this non-official rom.
could someone be able to tell me how to solve this problem without
flashing my diamond ?
Hi to all,
as you know, when new sms is received on Topaz and the screen is not active, green led starts blinking. That usually happens as well on my device, but sometimes there is no sound neither blinking when message is received.
But when I activate the device, the notification of new message appears. The problem is that the message is usually hour or even more older. Anyone has the same problem? Or is it just me?
The blinking light will stop after 5 min, by default. I changed mine to flash indefinitely.
1. Go to Settings - Sounds & Notifications - Notifications
2. Select Messaging: New text message
3. For the "Flash light for ..." option, change it to "No limit"
Message received sound notification
I have the same problem when it comes to playing the message received sound notification when my phone is locked. When I receive messages I can only see the blinking light notification then after I unlock the phone the sound plays. Its really annoying. Does anyone have a solution?
same here. But not always. I think it happens when the device is not locked and the screen is in stand-by
common issue...ROM issue!!! hopefully it will be fixed with the next ROM release
Yes I'm getting this to, it seems to be intermittent... And its annoying...
I picked it up yesterday off the table turned it on and Yep the SMS sound notified me and said it had a new sms and the green led started blinking, its like it goes into some sort of sleep mode and when you pick it up to turn it on, it then lets you know you have a message..... I hope there's fix for this soon..
R..
Hi
I had this issue and fixed it.
I used Advanced Config and under the power settings changed 'Battery resuming from suspend timeout' changed this from 1 second to 10 seconds.
The problem is the device wakes up, often gets enough time to signal the LED to flash but the device suspends again too quickly for the sound to play.
Regards
Phil
PhilipL said:
Hi
I had this issue and fixed it.
I used Advanced Config and under the power settings changed 'Battery resuming from suspend timeout' changed this from 1 second to 10 seconds.
The problem is the device wakes up, often gets enough time to signal the LED to flash but the device suspends again too quickly for the sound to play.
Regards
Phil
Click to expand...
Click to collapse
The problem is that the device even does not start blinking. So it behaves like there is no new message until you press power off button and the screen becomes active. Not sure whether we are talking about the same problem
Hey guys, I have a SGA S5830C, running 2.3.6
Yesterday I was going to call a contact and, when I touched the contact to select him, the phone has stopped responding. I had to remove the battery to turn it on.
Well, let's try again. Select the contact, started to call and, instead of showing the options screen after press the call button, the screen turned black, showing only the status bar and stopped responding again. Battery off, battery on, phone on again. The same. Tested several times with a friend who works with me.
I stopped using the phone until I go out the work. I went to my gf's house and tested several times again. Same issue all the times.
Reset the phone to factory settings didn't work. All wipe didn't work. Reinstall original rom (Claro BR), didn't work. Install original 2.3.6 w/o carrier customizations didn't work.
I have no idea what to do
Can somebody please help? :highfive:
Edit:
I forgot some information
The call is completed, even if nothing apears on screen, but I can't use the phone until I restart it.
When I recieve calls, I choose to answer the call and the options (end call, keypad, etc) appears. I can hear the person and he/she can hear me, but only they can end the call, cause the phone doesn't respond, freezed on the options' screen.