Related
Hi,
I used to upgrade roms all the time on my 8125 and never had a problem - until a couple of days ago. I tried installed the wm6 "most beautfiul" rom on my ppc and it bricked my phone. After many attempts I finally realized that I needed to install the official cingular 225 rom (available on the site) in order to get my phone to work. Since then I have tried downgrading to button and to wizard love with no success. My ultimate goal is to get to WM6. I have tried unlocking and have read all the threads and followed the directions but I cant switch roms. Can someone please help me with this. I am getting desperate.
thanks
ecomajor said:
Hi,
I used to upgrade roms all the time on my 8125 and never had a problem - until a couple of days ago. I tried installed the wm6 "most beautfiul" rom on my ppc and it bricked my phone. After many attempts I finally realized that I needed to install the official cingular 225 rom (available on the site) in order to get my phone to work. Since then I have tried downgrading to button and to wizard love with no success. My ultimate goal is to get to WM6. I have tried unlocking and have read all the threads and followed the directions but I cant switch roms. Can someone please help me with this. I am getting desperate.
thanks
Click to expand...
Click to collapse
do you have a G3 or G4?
What are your IPL/SPL?
Which other ROMs have you had installed on this wizard?
ecomajor said:
Hi,
I used to upgrade roms all the time on my 8125 and never had a problem - until a couple of days ago. I tried installed the wm6 "most beautfiul" rom on my ppc and it bricked my phone. After many attempts I finally realized that I needed to install the official cingular 225 rom (available on the site) in order to get my phone to work. Since then I have tried downgrading to button and to wizard love with no success. My ultimate goal is to get to WM6. I have tried unlocking and have read all the threads and followed the directions but I cant switch roms. Can someone please help me with this. I am getting desperate.
thanks
Click to expand...
Click to collapse
So, you start a new thread with the same problem you posted in another thread hoping to get an answer??
My answer to you is the same one I posted to you before --
READ THE STICKY ABOUT UNLOCKING AND FOLLOW IT STEP BY STEP!!
Then -- and ONLY then -- will you be able to flash to a custom ROM.
newbie2 said:
So, you start a new thread with the same problem you posted in another thread hoping to get an answer??
Click to expand...
Click to collapse
Yep, I've replied to ecomajor's various posts in various threads and have basically given up. Very little info each time and having a problem that nobody else that has followed the steps has had.
Sorry ecomajor, don't know what else to tell you that hasn't already been said numerous times.
One Last Try -- Then, I Give UP!!
Read the following post on how to flash ANY Wizard (yes, that includes the 8125) --
http://forum.xda-developers.com/showpost.php?p=1177659&postcount=1
Now, follow the directions in that post WORD FOR WORD and STEP BY STEP. The only reason it wouldn't work is that you're NOT READING and/or NOT FOLLOWING THE INSTRUCTIONS STEP BY STEP.
If you CAN'T read and follow directions, then don't be trying to flash different ROMs to your phone. If you're not willing to do what's necessary to help yourself, then noone else is willing to help you, either. . . especially when your problem has already been replied to with the same information over and over in 2 DIFFERENT THREADS now.
Let me detail you the exact steps I have taken. I have read through those posts, many times so I am certain I took those steps
1)device starts normally goto step 3.6 since unsure if unlocked.
2) read farias thread
3) download buttons rom
4)attempt to downgrade rom - failed
4a)tried 1.08 rom instead of button - failed
4b)tried wizard love- failed
5)download lokiwiz
6)followed all directions -failed - since was not able to downgrade rom.
Obviously these directions are not 100% foolproof - I know that the first time I tried installing WM6, I did not read through all the threads and after much effort I discovered that if I installed the official cingular 225 rom then I could get my ppc back working but since then I have had no luck getting flashing to work. Please tell me what I am doing wrong because noone has had my exact situation. there is no need to act all holier than thou and accuse me of not reading because since I screwed up the first time I have read through all these threads numerous times.
Ok, one more thing to try (shot in the dark, but I have no clue what is happening here)...
On your PC (its running XP, right???), do you have Firewall and/or Antivirus? If so, reboot your pc and don't start anything and then turn off your Antivirus and Firewall programs (I found a couple of threads where people were getting the error 260 when ZoneAlarm is active). Now try flashing the button rom. Don't try doing any other roms, don't try doing lokiwiz, just try to get the button rom on. If that works, then continue on with the steps here:
http://forum.xda-developers.com/showthread.php?t=285435
You might even try booting your computer into safemode and try flashing that way (I doubt activesync would be there, so put the phone in bootloader mode, and if you see USB above the left softkey then you should be able to flash it this way from safemode. Never tried it, but it pretty much eliminates anything that may be on your PC thats causing problems).
If none of that works, then get back to an official stock rom again and report back here with exactly what you did, what you saw, and all. Don't worry about the post being long, because to me, too much info is better than just short posts that don't tell us anything. Also, only update this thread. Forget all the other threads you have stuff going on about this problem.
Final question, I asked this before (and I don't remember if you answered or not)... Have you tried to flash your device from another PC?
And I've attached the ROM Update Utility Readme.doc that describes the error messages and how to fix them.
The weird thing is I never get code 260 with the cingular rom update just with the other roms. I will have to try the disabling all firewalls, antivirus etc at home bc at work there is all sorts of stuff i dont want to mess with. Problem if I do it in safemode is then the activesync driver wont be loaded and it will give me an error for that.
mfrazzz said:
Ok, one more thing to try (shot in the dark, but I have no clue what is happening here)...
On your PC (its running XP, right???), do you have Firewall and/or Antivirus? If so, reboot your pc and don't start anything and then turn off your Antivirus and Firewall programs (I found a couple of threads where people were getting the error 260 when ZoneAlarm is active). Now try flashing the button rom. Don't try doing any other roms, don't try doing lokiwiz, just try to get the button rom on. If that works, then continue on with the steps here:
http://forum.xda-developers.com/showthread.php?t=285435
You might even try booting your computer into safemode and try flashing that way (I doubt activesync would be there, so put the phone in bootloader mode, and if you see USB above the left softkey then you should be able to flash it this way from safemode. Never tried it, but it pretty much eliminates anything that may be on your PC thats causing problems).
If none of that works, then get back to an official stock rom again and report back here with exactly what you did, what you saw, and all. Don't worry about the post being long, because to me, too much info is better than just short posts that don't tell us anything. Also, only update this thread. Forget all the other threads you have stuff going on about this problem.
Final question, I asked this before (and I don't remember if you answered or not)... Have you tried to flash your device from another PC?
Click to expand...
Click to collapse
ecomajor said:
The weird thing is I never get code 260 with the cingular rom update just with the other roms. I will have to try the disabling all firewalls, antivirus etc at home bc at work there is all sorts of stuff i dont want to mess with. Problem if I do it in safemode is then the activesync driver wont be loaded and it will give me an error for that.
Click to expand...
Click to collapse
I've never tried it in safemode so I don't know if that will work or not, it was just an idea as we are grasping at straws here. But if you boot to safemode, and with the phone at the bootloader screen (hold down the camera button while you turn it on to get to the "rainbow" bootloader screen), if it shows USB above the left softkey then the computer and phone are communicating and Activesync does not matter. BTW:You can try the safemode way there at work as you will have no network connectivity in safemode so you don't have to worry about violating security policies.
You still have not answered my one question directly... Have you tried flashing the button rom to your phone on multiple computers? Or have you always done it from the same PC? And are the PC(s) that you are using running Windows XP?
What DOC chip does your device have? G3 or G4?
If you have a G4 then i guess you ruined your bootloader since G4 devices don't have and don't accept 1.xx IPL versions!!
I have tried button from multiple pcs. This time it gets up to 98% on button and then dies and it gives error 302 - update error for the button. This is a problem that I was having before.
Did you read the document I posted?? If you're getting Update Error 302, you're not going to be able to recover with anything other than the stock Cingular ROM.
Chances are that you did indeed ruin the bootloader when you tried using the ShellTool to flash a G3 phone. And I doubt seriously that you'll be able to do a warranty exchange if you can run the stock ROM successfully, so I'm afraid you're stuck now with the stock-shipped ROM.
So you are saying there is no way to fix the bootloader (like flashing it or soething) I was figuring I had screwed something up. I actually had read the document before but thanks for your help. Why is it that you can fix many other issues with the 8125 but not the bootloader?
I'm not saying it CAN'T be done. What I AM saying is that in the year I've been registered and active here, I've not seen any posts/threads about recovering from a bad bootloader. But that doesn't mean that there ISN'T a way to do it.
You might want to do a search of the Wizard section for bootloader error or recovering bootloader to see what might come up.
Good Luck!!
I apologize in advance if my questions are trivial and I am just dense.
I am pretty sure I've read through all the threads for "n00bs" but I still can't get a grasp of what exactly hardSPL does or is. I ran the search function and found that I don't NEED it per say and has claimed that it actually is "safer" to use USPL.
I own a Tmobile Wing (IPL > 4.xxx)
1. What exactly is the difference between USPL and hardSPL?
2. What are the limitations of either one.. will flashing a cooked rom without hardSPL cause problems?
3. I currently have flashed the newest Open Touch 4.0 and haven't had any problems at all (USPL), but I noticed in the thread for Touch-IT, it says that hardSPL is required. What does that mean exactly? If I flashed it w/o hardSPL.. will my wing crash/brick?
4. At some point, I'd like to sell the phone, so I don't want to do anything that is irreversible. My understanding was USPL is reversible, hardSPL is not?
5. I was on the verge of flashing the hardSPL but chickened out.
I installed the three cab files (canonyang.cab aserpolicy.cab disablesecurity.cab) but decided I wasn't ready to flash.
Will that cause any problems (installing the .cabs but not flashing)?
any help/input would be greatly appreciated. Sorry for all the n00b questions. Thanks
Essentially what you are doing is changing the Bootloader so you can install a different ROM regardless if it's signed.
USPL and HardSPL is a matter of having it done temporarely or permenantly.
USPL (temporary), is the safe route. This will allow you to Install one USPL capable ROMs per USPL. So if you're not a big flasher, and thinking about selling your phone in the near future, then you might want to stick to this method.
HardSPL (permenant), is the only TRUE way of bricking your phone. You will flash the bootloader for good so that you can constantly flash new ROMs without having to worry about flashing your bootloader of making sure it's a signed ROM. For heavy flashers, like myself, this is the ideal route.
HardSPL is reversible, there are some threads on how to do that. If I remember correctly, you have to flash back to a Stock T-Mo ROM.
Some ROMs require HardSPL because sometimes the cooks use different methods to flash ROMs onto devices other than ActiveSync (which is needed for flashing via USPL).
For example, ttran001's Open Touch V4.0 Micro ROM flashes onto your device using your SDCard, the phone is never connected to you PC so no opertunity to USPL. If it was not HardSPL'd, the ROM would be rejected. If it was, the flash would continue flawlessly.
I hope this answers your questions, and please, if I got anything wrong, correct me.
Regards,
three4seven said:
5. I was on the verge of flashing the hardSPL but chickened out.
I installed the three cab files (canonyang.cab aserpolicy.cab disablesecurity.cab) but decided I wasn't ready to flash.
Will that cause any problems (installing the .cabs but not flashing)?
any help/input would be greatly appreciated. Sorry for all the n00b questions. Thanks
Click to expand...
Click to collapse
Oh and from what I understand, installing those cabs wont hurt your device if you dont HardSPL. I believe you can uninstall them from the "remove program" which can be found under Settings/System/Remove Programs.
Everyone's allowed a Noob question every now and then I only know all this info because I read, so im sure if you read u'll be just fine.
nKiwan, thanks for quick and throrough reply
I get a little lost with this:
nKiwan said:
This will allow you to Install one USPL capable ROMs per USPL.
Click to expand...
Click to collapse
what does that mean exactly?
perhaps I should start by asking the USPL acronym stands for - I've googled it and I couldn't find the right acronym.
From my understanding.. the only real difference (besides one uspl rom per uspl vs infinite - i'm still a little hazy on that) is that hardSPL allows for flashing outside of activesync?
thanks again... I swear I tried my best using the search function and reading
Well, correct me if i'm wrong, if you do not HardSPL, then you must USPL your device everytime you wish to flash your device. This will temporarely change your bootloader so it will allow you to flash a non signed ROM, a.k.a. an "outside" ROM. USPL capable ROMs, are ROMs that you can flash using USPL, therefore, ActiveSync.
Well there are two differences I guess... HardSPL, basically, allows for flashing outside of ActiveSync; and will allow you to flash any ROM as many times as you would like, once HardSPL'd.
As far as the acronym goes, I have NO clue lol. Never bothered to find out, I guess it would be helpful to know .
nKiwan said:
Well, correct me if i'm wrong, if you do not HardSPL, then you must USPL your device everytime you wish to flash your device.
hardSPL.... will allow you to flash any ROM as many times as you would like, once HardSPL'd.
Click to expand...
Click to collapse
Technically then.. I could also flash any rom as many times as I want using USPL as long as I run USPL.exe? I read the flashing guide several times. The only difference I found was that you run USPL.exe and it goes through a loader instead of just running the RUU flaser. Is that right?
i apologize once again if I am being incredibly dense.
thanks again for putting up with my n00bness
there ya go! you got it. As you become more experienced you'll start to understand the need of HardSPL.
I was once a noob myself, so i understand where u coming from . Just glad I can help.
Regards,
nkiwan - thank you so much for answering my barrage of n00b questions.
You have been a great help. I really appreciate it.
Wow I think this is the coolest thread I have read ...it is just awesome what the WWW has done for all of us and thanks for the info
Glad I can help
I can understnad the use of USPL but I would recommend the use of hard SPL if you are planning to flash multiple roms. Either way I think it is just a matter of whether or not you actually want to run the USPL everytime you want to flash a rom... Don't quote me on that.
Just to doublecheck myself....
If I use USPL method and hard reset my phone - will I have the stock rom or the flashed one?
if I understand correctly USPL will bring back the stock one after hard reset and HSPL the new one.
very sorry to ask this now..from what i get is there are 3 ways of turning ur phone from phone to super phone:
1. install .cabs
2.soft flashing
3.hard flashing???
am i rite??
nKiwan said:
As far as the acronym goes, I have NO clue lol. Never bothered to find out, I guess it would be helpful to know .
Click to expand...
Click to collapse
I found this thread that you might find useful for the acronyms:xdasite.com/showthread.php?t=1104
Same was with me.....
three4seven said:
I apologize in advance if my questions are trivial and I am just dense.
I am pretty sure I've read through all the threads for "n00bs" but I still can't get a grasp of what exactly hardSPL does or is. I ran the search function and found that I don't NEED it per say and has claimed that it actually is "safer" to use USPL.
I own a Tmobile Wing (IPL > 4.xxx)
1. What exactly is the difference between USPL and hardSPL?
2. What are the limitations of either one.. will flashing a cooked rom without hardSPL cause problems?
3. I currently have flashed the newest Open Touch 4.0 and haven't had any problems at all (USPL), but I noticed in the thread for Touch-IT, it says that hardSPL is required. What does that mean exactly? If I flashed it w/o hardSPL.. will my wing crash/brick?
4. At some point, I'd like to sell the phone, so I don't want to do anything that is irreversible. My understanding was USPL is reversible, hardSPL is not?
5. I was on the verge of flashing the hardSPL but chickened out.
I installed the three cab files (canonyang.cab aserpolicy.cab disablesecurity.cab) but decided I wasn't ready to flash.
Will that cause any problems (installing the .cabs but not flashing)?
any help/input would be greatly appreciated. Sorry for all the n00b questions. Thanks
Click to expand...
Click to collapse
Hi Brother,
Same problem with me i have also search every where but failed... no answer about Hard spl.Every body say do hard spl and search in fourm and so on. There was no proper guide what it is and how to do. i was really puzzel. Now i have come to know that axect what it is Hard Spl.
Hard Spl mean CID unlock. If you unlock CId of the phone its mean you have done Hard SPl. Without CID unlock you can not write ROM.
Thanks
Br Raja
I have a T-Mobile Wing. I hardSPL'd it, installed a custom ROM, then I used the RUU to flash the original ROM back to it. It doesn't show the CanonYang startup screen, but the SPL version is still 4.70.Yang. Is it still HardSPL'd?
Stargazer418 said:
I have a T-Mobile Wing. I hardSPL'd it, installed a custom ROM, then I used the RUU to flash the original ROM back to it. It doesn't show the CanonYang startup screen, but the SPL version is still 4.70.Yang. Is it still HardSPL'd?
Click to expand...
Click to collapse
You can always check in the bootloader screen (the RGB screen).
Even if you have a 4.70.Yang you still need the IPL to be higher than 4 to flash custom ROMs. That is what is important.
If you ever see any of these number's change, Run the HardSPL folder again.
I am new to completely flashing a custom ROM. I've been trying to flash a new ROM on my tilt, with the latest AT&T updates(ROM 1.62.502.0 Radio 1.27.14.09). Each time I try to flash a custom ROM I get Error 262 Update Error. The progress bar never gets past 0%. I've tried multiple PCs and tried reinstalling ActiveSync. Am I missing something, or do I have to do something first before being able to flash the new ROM?
Any help is greatly appreciated!
Steve
i suggest u read all the wiki's and stickies regarding flashing a custom rom before taking any action...u obviously havent read it or havent got a good understanding of it which is why ur getting this error...and btw..i also suggest u search for solutions rather than just posting a thread like this which can be answered through a brief search of the forums.
I am about 100% sure you searched, didn't you?
Here, baby boy, let me spoon feed you and you can ask your mommy if she can whipe your drool:
http://www.digwin.com/view/schaps-wm6-pro-roms-update-error-262
bapssystupr3m3 said:
i suggest u read all the wiki's and stickies regarding flashing a custom rom before taking any action...u obviously havent read it or havent got a good understanding of it which is why ur getting this error...and btw..i also suggest u search for solutions rather than just posting a thread like this which can be answered through a brief search of the forums.
Click to expand...
Click to collapse
I have searched the forums over the past week or so. The solutions suggested such as soft reset, hard reset, reinstall activesync, switch USB ports, etc have not done anything. I also came across this thread:
http://forum.xda-developers.com/showthread.php?t=370205
which would suggest that I there is an incompatibility. I was hoping someone could point me in the direction of which radio version etc I would need to update to in order to update to a WM 6.1 ROM.
edit:yes I have run CID unlock.
Steve
AT&T 1.62.502.0 w/ 1.27.14.09 radio should flash fine on any Tilt even without CID unlock, since it's signed by AT&T. While I'm glad to hear your phone is CID unlocked, it's still strongly suggested that you flash HardSPL & Security Unlock your device.
Regarding your current issue, have you:
* Tried another computer to flash from?
* Entered tri-color bootloader mode on your phone prior to flashing? You can find out how to on the wiki.
Hope this helps!
_Alex_ said:
AT&T 1.62.502.0 w/ 1.27.14.09 radio should flash fine on any Tilt even without CID unlock, since it's signed by AT&T. While I'm glad to hear your phone is CID unlocked, it's still strongly suggested that you flash HardSPL & Security Unlock your device.
Regarding your current issue, have you:
* Tried another computer to flash from?
* Entered tri-color bootloader mode on your phone prior to flashing? You can find out how to on the wiki.
Hope this helps!
Click to expand...
Click to collapse
Thanks Alex! Tri-Color mode worked!
Steve
My error 262 fixed
I don't know if this is the best place to put this, but I didn't want to open a new thread.
I too had been getting repeated error 262. And I spent a couple of hours searching for answers, and while there have been many questions raised on this subject, there have been few clear solutions (and certainly none that worked for me).
I have the HTC branded Kaiser installing from Vista. (By the way I am new to this, but as I had such a hard time working this out, I thought I should at least post what worked for me.) I unlocked the CID with pof's Hard-spl v1 tool. Then (as I want to stay with Mobile 6.1) I upgraded the hard spl to v3.28 by JockyW. I then downloaded a number of Roms I wanted to try. That is where the trouble started.
Each ROM I tried would get past the tri-color screen with no problem. Then it would hang at the 0% until finally showing the error 262. A soft reset would reload my previous rom unchanged. I tried many things: removing all USB's, firewall, virus protection, hard reset, reboot windows, every suggestion I could find (and understand).
While the hard spl I had should have worked, I thought I should try version 3.29. When trying to upgrade to that I had a similar problem with error 260 this time. Looking over spl update instructions I realized I had forgotten to uncheck "disable usb connections" in "Activesync" at the proper stage. Once that was unchecked, the new spl loaded. After that I was able to load the cooked roms with no problem.
It appears there was something wrong with the HardSPL v3.28 I was using or in how I installed it. The tricolor screen was showing 3.28. In any case, after I reinstalled a new hard spl (this time 3.29), I had no more error 262.
A bit long-winded, but hopefully this might help someone else.
Uhh......yea......I was trying to upgrade my Rom to Dutty's Diamond V1 Build 19588. I was using the instructions from Flash-Your-Tilt . I got to Step 4 CID-Unlock it installed 100% rebooted and then nothing. Now the phone will only play the intro with no sound, then go black. It shows in the lower right hand R 1.70.02iNex, G25.65.30, D1.62.00.00. The phone will allow me to do a hard reset but after it it goes through the intro with screen alignment and installs the extra apps, it reboots and then goes black. I did a ton of reading through the wiki's if someone could point me in the right direction or tell me if its toast, it would be much appreciated.
Thanks
Be strong. I think it's only bricked when you can't power it on.
I have a poor net connection and not time atm. So a suggestion if you haven't already, search the forum for the word bricked. I'm sure this has happened before..
There are several tricks that people know so you might be ok. good luck.
Calihoe said:
Uhh......yea......I was trying to upgrade my Rom to Dutty's Diamond V1 Build 19588. I was using the instructions from Flash-Your-Tilt . I got to Step 4 CID-Unlock it installed 100% rebooted and then nothing. Now the phone will only play the intro with no sound, then go black. It shows in the lower right hand R 1.70.02iNex, G25.65.30, D1.62.00.00. The phone will allow me to do a hard reset but after it it goes through the intro with screen alignment and installs the extra apps, it reboots and then goes black. I did a ton of reading through the wiki's if someone could point me in the right direction or tell me if its toast, it would be much appreciated.
Thanks
Click to expand...
Click to collapse
Flash an OEM Rom/Radio Combo. Also it wont hurt if you already CID unlocked to to go ahead and flash a new SPL to it. Should fix any and all issues as your phone is still actually booting and Not bricked
Installing windows the 6.1 ROM from HTC's site worked. Thank you very much for the great advice. If I wanted to now put Dutty's ROM on my phone can I go straight to that, or do I need to restart the whole ROM flashing process(installing Jump SPL, Hard SPL and CID) ?
If you have unlocked it, just put duttys onto the SD card and rename the .nbh to KAISIMG.nbh
Put the phone into bootloader and install Its the fastest most successful method. No worry about a data cable coming out mid flash ( happened once to me....not fun )
Shouldnt have to install hardspl again ( or use JumpSPL )
Just make sure that if you are installing a WM6.0 rom that you have a WM6.0 radio. If not, the flashing process for the radio is the same ( rename to KAISIMG.nbh )
Is there a way to see if I the hard SPL install and CID unlock worked ? Can I just restart the whole process regardless. Sorry for the noob questions.
Calihoe said:
Is there a way to see if I the hard SPL install and CID unlock worked ? Can I just restart the whole process regardless. Sorry for the noob questions.
Click to expand...
Click to collapse
Go into bootloader. If your screen says hardspl somewhere near the top then you're good to go. Check which version because you can have radio problems if you use a WM6.0 spl with a WM6.1 rom. Most recent roms are WM6.1 so try HardSPL 3.29 or higher.
If you don't have hardspl, get it here for wm6.0 roms or here for wm6.1 roms.
many thanks, your advice with the links were invaluable. I read and read and read, but i guess i did not read enough. This site rocks.
Hi, I have been reading this forum for some weeks and I am thinking of unlocking my Touch 3G by using this Hard-SPL thing which is available here.
However I am still hesitating because I have never done such an "intervention" in the past, so please allow me to ask you if you did it and if yes if it worked without problems (from the thread I wasn't able to understand if more that 2-3 people have really succedded!)
Thanks, lila
I actually tried few times yesterday and today, but I am getting "Server is down" message .
i manage to solve it. how? i have exit my antivirus, then, go to control panel/windows firewall and put it on off, and will work. each time, i have install enablerapi.cab on device memory.
I disabled firewalls and antivirus software. I tried on three different computers with different (working) access to internet. Still no joy . I guess I will try later.
I've unlocked my Jade without any problem, but to be honest i didn't flash another ROM yet because i want to be sure i can go back to original one (just in case of waranty), and i don't know how to rebuild my dumped original ROM.
I'm still trying to figure this out, gonna succeed as long as i keep reading this excellent forum.
Anyhow, flashing a new ROM isn't that difficult, but you have to follow the guidelines very well and keep on your reading glasses..)
Hi. I am very happy Thank you OLINEX. I have HTC 3G (Jade 100) I make HARD SPL and I install http://rapidshare.com/files/15981107...30.09_Ship.exe
rom. It is very good rom and stable. Now I have english language and my phone rings best. Thank you OLINEX.
fenikso said:
I disabled firewalls and antivirus software. I tried on three different computers with different (working) access to internet. Still no joy . I guess I will try later.
Click to expand...
Click to collapse
So, I finally got it to work. I will post my "story" to Hard-SPL thread .
i did it with the first attempt with v3, no problem and i'm really happy
Hard-SPL
With hard-spl you will not unlock your jade . It´s only necesary to upload others roms to device.
estancolaplaza said:
With hard-spl you will not unlock your jade . It´s only necesary to upload others roms to device.
Click to expand...
Click to collapse
Oh yes you are right, however that's what I meant; in fact I have a Jade with French ROM and I want to change it to English.
for me dont work the hard spl....
I've been trying for the past 3 days to Hard SPL my jade without any luck. always the phone restart without entering to tri color mode.
I even tried to exit the antivrus and disable the firewall but always same error.
Any suggestions here please?
fenikso said:
So, I finally got it to work. I will post my "story" to Hard-SPL thread .
Click to expand...
Click to collapse
Ca you post your story please maybe you can give us a little help.
Thank you
no luck with the one i tried, just restarts. dont know why this phone is so special, every other one ive done is so easy.
stock loader version is 1.40.707.2 tried using windows xp sp3 .net3.5, tried using hardspl v2 and v3 (tried v2 just in case that worked)
the link is dead!!
lots of problem, the HardSPL from Oli doesnt work, but the radio update from HTC works
keep trying and win
SPL does work. But you must keep trying. I got "server down"
and so on. After a week and hundred times try, I got unlocked the phone.
Now I can enjoy any wm6.5 roms. It is free software and not perfect.
But It does the job . well done Olipro and Cmonex.
Which phone do I have ?
My phone is supposed to be a Touch 3G but the processor is a Marvell PXA310 @ 624 MHZ.
The phone says it's a T3238, can someone tell me which phone I have please?
It's a clone I think.
When I boot holding the volume key I get a white screen saying USB update model
Hi,
I have a TOUCH 3G and I did the HARD-SPL. The better thing in here is that developers and always available to help you. For example, i had some problems doing hard-spl to my Jade but with the help of cmonex(developer) i've done it without any problems. You have a lot of support in here. SO, If I were you, I would do it.
it works like a charm
hi
Yes i did my HSPL today and it worked like a charm it was so easy and
i had a gene(P3400i) and the HSPL for this phone was so difficult
compare to the HSPL for Jade
the Jade HSPL took only around 10-15 mins
now i need to flash some cooked rom will do it today right now downloading ironegles ROM
Note : u need to off ur Firewall or it wont work OK