Hello,
i'm planning to buy a dual sim adapter for my tattoo.
I found two adapters, but they are both a little expensive:
Adapter 1
Adapter 2
Does someone has experience with these adapters? Or with another one, cheaper?
I just need something that allows changing the active sim without turning the phone on/off.
Problem with these adapters is, that you have to cut out the chip out of your SIM cards and put them into the adapter...if they dont sit firmly in the chip slots, you'll experience loss of signal all of a sudden...Oo
Also you can damage you SIM...badly!...it's somewhat risky...the first adapter you mentioned provided once the service to cut the chips out for you, but I think they don't do it anymore...
I didn't know we can use external dual SIM adapter. Thanks I'll try it today.
I brought a MHL to HDMI adapter and I do not get a picture from it with my i9305 LTE
When I connect/disconnect I get a toast message to say HDMI connected/disconnected. and the phone charges.
When I connect a i9300 phone to the HDMI adapter it works OK.
Has anyone else had this problem?
Some early ones (9300) are wired differently and our 9305 will not work
Is there a specific adapter for the i9305 or have they removed the functionality
wstevew said:
Is there a specific adapter for the i9305 or have they removed the functionality
Click to expand...
Click to collapse
11-pin MHL-HDMI Adapter/Dongle
The Samsung Galaxy S III and Galaxy Note II use a connector that is similar to the original 5-pin MHL-HDMI adapter/dongle, but it uses 11-pins in order to achieve a few functional improvements over the 5-pin design.
It supports the use of USB and MHL simultaneously. (Note that the new Samsung 11-pin MHL-HDMI adapter also has a USB On-The-Go port).
Samsung’s Galaxy S III/ Note 2 can power the MHL-HDMI adapter (when used with a non-MHL-compatible-TV). Although this can theoretically also be done with the standard 5-pin micro-USB connector, the Galaxy S III's 11-pin connector is believed to be the first smartphone that supports this functionality.
http://www.mobilefun.co.uk/samsung-galaxy-s3-note-2-mhl-hdtv-adapter-epl-3fhubegstd-p35119.htm
OK so I checked and the model I have is 11 pin
EPL-3FHUBEGSTD
Which is the one you linked too.
Have you checked the USB debugging in advanced settings
I just checked mine today for the first time since I bought it from Amazon about 2 weeks ago. Cost me £9 - works fine. Although sometimes, it does lag a bit.
http://www.amazon.co.uk/gp/product/B00A2OBO6S/ref=oh_details_o01_s00_i00
I have tried with USB debugging on and off. Its usually on for dev purposes.
I spoke to Samsung who suggested I have a faulty MHL.
I have just had another thought though. I am running Nova Launcher, maybe touchwiz is required. I will give it another try tomorrow.
I was right, change back to touchwiz and the HDMI adapter works.
Thanks for the help
Do hdmi works on aosp custom rom?
no Samsung mhl is proprietary the 11 pins make it unique compared to standard mhl ports. as far as I know I have not heard of any aosp rom that has mhl enabled or working
Any luck?
Can anyone recommend a cheap mhl hdmi adapter from eBay?
Hi.
Can anybody tell me, is there a flawlessly workind dual SIM adapter (perhaps without cutting the mini sim card ) for the S5 which works with DSC 2.3 and CM7 Roms?
(An adapter, please no additional devices)
push?
So, the phone is faster than towers have had in the past. I know that with the right cable I can get HDMI out to a monitor, but I also want to use a USB card reader and speakers at the some time. Has anyone made a dock that would work for this or have an idea about how to hack one together. I want to make sure the adaptors will pass the signal. Micro USB port replicators? Searching google didn't give me any results.
Also, can you use a bluetooth keyboard and mouse with the HTC one?
Anyone's 2 cents on this project?
If no one knows I'll start trying to figure it out and update the thread with what works and what doesn't
So the other day i was wondering if there was a way for us to add microsd card to this phone which is specially needed for those with 8/128 variant
Because Rog 2 has 2 usb type c ports there are lots of possibilities, maybe we could use one of them to connect to a microsd card slot(if we could find a tiny microsd to type c connector)
or maybe we could make a case with a built-in type c connector and the ability to put microsd in!
as we know there has been some case models for some phones that have had a built-in battery that could connect to phone with an also built-in micro-usb/type-c port, or some other cases/covers that have a type-c connection and ability to connection controllers, like the Rog 2 kunai case that bundles with kunai game pads
My third thought was to find(or make) something like the picture attached below, a microsd adapter that can be bent and attached to the back of the phone, it wouldnt be that hard, would it??
any ideas or suggestions on this matter?