I can't figure out how to enter a '0' on the keyboard. All the other numbers are available, but nothing gives a 0. I need this to enter my APN along with passwords etc...
anyone else have this problem?
Use software keyboard for now. Tap on the text entry area and it should pop up.
this thread fixed me:
forum.xda-developers.com/showthread.php?t=669699
Related
Does anyone know if it is possible to have the phone default to the business number instead of the mobile number of a contact?
This can save me quite some usage costs.
How is it you are calling people? Do you use the default WM6 contact's list?
I type in some of the keys of the keypad until the right contact is found and the press the green button to call the person.
This takes the mobile number as default.
Got it...
I'll explain step by step what i did, just so we know we're on the right page...
Pressed Green Phone button
Typed in name using On-Screen Button's (I typed in Kenny, so dialled 5 3 6 6 9)
When Kenny's name appeard, I pressed and held his name, so a menu appeared from my stylus
I selected "Work"
I immediately hung up (cos i didn't actually want to call him, just test this theory )
From then on, whenever I dialled Kenny, it would default to his work number.
Try this and see if it works, I know it's not an ideal solution, but let me know how you get on...
EDIT: Alternatively, I've just found out you can use the D-pad to change the default. SO step by step again...
Press Green Phone button
Use on-screen dialler
when your desired contact appears, press down on the D-Pad untill you highlight them
When highlighted, press right on the D-Pad to change the default number (for reference; h = home, m = mobile, w = work)
That seems to work.
The problem is however that it takes me to remember I actually called this person before.
The trouble is that I have 700 colleagues with a short (cheaper) business number and a mobile number.
An alternative I tried was to switch the business number and the mobile number in the contacts, but the I get in to trouble when I want to send an SMS.
Thanks for letting me know about the PAD
I was actually calling people and hanging up all over the place until I realized through Your note that I can just go into contacts and while scrolling down the contacts with the nav-pad change their default number by pressing the nav-pad sideways... No need to call people hanging up on them
That sounds excellent.
I tried it and it works for me.
Thanks for the tip.
Hello here,
I have lost Autocomplete of Contacts when writing a name in the To: Field of an Sms message.
I have Fun Contact installed, which gives the contacts an iPhone type look, since then it's been playing up. I have since uninstalled this, but it still doesn't provide suggestions of names in my contacts list, when I begin to type a name in the To field.
It's very annoying and one of my favourite features of using Sms on Windows Mobile.
Any Suggestions would be really appreciated.
Regards.
Y.
Does other predictive input work fine with your default keyboard? One more thing, when you try entering a contact name, the predictive function searches only for the contacts with numbers entered in the "mobile number" field. Check if your contact has the number there.
Regards,
Carty..
I lost that feature when I installed touch keyboard + keypad from dutty's collection
but after uninstalling them its fine now
Hey Carty,
Thanks, that's something I hadn't checked. My other predictive imput isn't working either. I have an idea why it might be. I downloaded KaiserTweak and, changed quiet a few things with it.
I set the Autocomplete to suggest me 6 words and this option is not available from the Drop down menu in the settings menu Of WordComplete.
It is not working anymore even though I have set them both to 3 words and after entering 3 letters. I have since Soft reset the device? Help would be really appreciated.
Thanks
Found the Answer
As I was saying I had made some changes with the KaiserTeaks app.
One of the changes I had made was to Enable XT9 under the Text Message options.
I realised this just now as I was going through the options and have set it to disable XT9, which is the default and this has fixed the problem
Hope this helps someone out there.
thanks y0u5uf,
will try it out seems like your suggestion is the easiest way out since i installed app like kaiser tweak, touch keyboard+keypad
is there any way that i can erase the words that i have wrote in my predictive text, are they stored somewhere where i can just go into and delete them, i want to start all over??
nvm i got it lol sorry
SMS Input
I have a similar issue. When I enter a character in the "to" field I dont get a list of choices to pick from. BUT, if I hit backspace and erased a character the names and/or numbers pop up.
Does anyone have a suggestion on how I can fix this?
Have a peculiar problem whenever i search for a contact.
i use the phone keyboard with t9.
On a few occasions i get numbers regardless of what letter im typing in, and this is genius because the number 1 gets hit on a-b-c and the number 1 in any number and the letter in any name...
But i cant find å way to figure out how the settings should be for this to be enabled?
This seems to work in the phone log but not for every contact, but as said earlier ive managed to get this function for the entire contact list when fumbling around a bit..
Anyone?
plugg3n said:
Have a peculiar problem whenever i search for a contact.
i use the phone keyboard with t9.
On a few occasions i get numbers regardless of what letter im typing in, and this is genius because the number 1 gets hit on a-b-c and the number 1 in any number and the letter in any name...
But i cant find å way to figure out how the settings should be for this to be enabled?
This seems to work in the phone log but not for every contact, but as said earlier ive managed to get this function for the entire contact list when fumbling around a bit..
Anyone?
Click to expand...
Click to collapse
it depends on where the focus(cursor) is, if it on the list then you'll have digits and search in Contacts, if your cursor in TextBox over the list, then you'll have just T9
So this means there is no way to get this function to f.ex in new/reply sms/mms/email ?
plugg3n said:
So this means there is no way to get this function to f.ex in new/reply sms/mms/email ?
Click to expand...
Click to collapse
why not ? when you click to the address line you'll see the same windows as in Contacts
ohh, got it now, would still be nice if this var standard and you could just type inn the numbers directly without entering the contact list manually like that if you see what i mean
thanks for clearing things up
For the sms thing, it works for me.. but with the name.
I use Full Keyboard (t9 off).
in the TO: field, I enter V and it shows me the first name starting with V.. as I go on.. it matches the name and usually by the third letter, I have the name I was looking for.
I have set suggest words after 1 letter. Doubt it has anything to do with it, though.
Hi,
recently I flashed my SGS with JM8 / Tatyuma. Since then the device fails to send SMS. The GUI just says "failed".
What can I do?
cu
mathiase
If you've got all your APN settings right, and can receive SMS but not send, you may have to put in your SMSC number.
Looks like I can't post links yet, so google "smsc numbers" and you'll see some results where your country/carrier should be listed.
Hi,
sry for not telling but I already tried that. I dial *#*#4636#*#* and type 00491722270222 in the SMSC field. There are two buttons: Update and Refresh. Update seems to do nothing, Refresh removes the number from the field.
Any suggestions?
cu
mathiase
mathiase said:
Hi,
sry for not telling but I already tried that. I dial *#*#4636#*#* and type 00491722270222 in the SMSC field. There are two buttons: Update and Refresh. Update seems to do nothing, Refresh removes the number from the field.
Any suggestions?
cu
mathiase
Click to expand...
Click to collapse
You need to be entering SMSC number in Octal-Hexadecimal format with special leading numbers, to tell android which format is that.
Basically go to (damn xda do not allow me to post links, as I am new user). DO search in google on "Online PDU Encoder and Decoder" - go to first link.
At the bottom, there is a converter for sms message to pdu format. Do the following, remove everything, except you smsc number (with plus sign) convert to pdu. Copy first 16 numbers from pdu. And enter them in your android SMSC update field. Click update - enjoy. It should be working.
Hi,
thank you very much for that advice! My SMS is working again
cu
mathiase
Hi I tried this and entered 07916174080001F6 into the SMSC field and hit update.
I then refreshed and the phone shows me it recorded 0791617408000166
I tried this 3 times, everytime it refuses to take alphabets as part of its SMSC number.
I even tried entering abcd -- it became 1234 when I refreshed.
What's wrong?
I have a huge problem. After I updated to GB, my smart dialer seems to be broken. When I start tapping numbers, no contacts start filtering out, then delete what I tapped and press on the info field and it gives me info about smart dialing. I start the process again and nothing happens, erase the numbers, tap on the info, I get the info, I remove the message telling me how smart dialing is and then it works as it should. It looks like a hickup but I am out of ideas on how to solve it.