Hello, I need some help, I tried to upgrade to the latest factory rom ( Diamond_MRII_RUU_Diamond_HTC_WWE-ME_2.03.456.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship.exe ) which I downloaded from the HTC site.
The previous rom on my diamond was the previous factory release. Before that, the phone had originally been given to me by a stupid shop in Greece wearing that hacked Swtos greek version.
I run the setup, the phone restarted, the progress bar went all the way up to 100% and the i got "error 270" the communication has been interrupted.
Now the phone stays in bootloader mode (the red-green-blue-white stripes that's what it is right?) and it displays:
DIAM100 MFG 64m
spl-1.40.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
Upgrade ROM code error
Please Try again
Any suggestions?
Thank you in advance!
Hey,
Just got my rhodium today... It came from a sample batch (some problems with my old Raphael - the distributor offered this free upgrade).
When I load the boot manager it has a big notice "Security Unlocked" on the top. Could someone please explain what it means? Does it mean I can flash any HTC ROMs without needing HardSPL? Or any ROMs at all?
Security unlocking is another level of unlocking for the radio. It allows you to flash radios (you need Hard though) from another device for example.
It also allows plenty of other stuff, but that's all most users take advantage of.
You're lucky, we normally have to wait for Olipro to get this
Dave
I have one like this as well. What exactly will it allow me to do?
slartiii said:
Hey,
Just got my rhodium today... It came from a sample batch (some problems with my old Raphael - the distributor offered this free upgrade).
When I load the boot manager it has a big notice "Security Unlocked" on the top. Could someone please explain what it means? Does it mean I can flash any HTC ROMs without needing HardSPL? Or any ROMs at all?
Click to expand...
Click to collapse
oh **** me sideways you have a prototype device.
put it in bootloader and tell me the SPL version - does it also say MFG?
slartiii said:
Hey,
Just got my rhodium today... It came from a sample batch (some problems with my old Raphael - the distributor offered this free upgrade).
When I load the boot manager it has a big notice "Security Unlocked" on the top. Could someone please explain what it means? Does it mean I can flash any HTC ROMs without needing HardSPL? Or any ROMs at all?
Click to expand...
Click to collapse
it will give you nothing without a HardSPL, but we can safely assume you are also SuperCID (these devices usually come with that feature too, even if the SPL isn't MFG) so you can flash any signed HTC ROMs
RHOD100 MFG 32M SS-BC
0.8.1000
Let me know of this helps you in any way. I have two of them.
I guess it may be a prototype - the rom on it is dated to around March
Pasting for your the bootloader info here:
RHOD100 32M SS-BC
SPL-0.79.0000
MicroP-Rhodium (LED) v7
MicroP-Rhodium (KEY) v4
TURBO HW/TURBO SW
TP MFG DATA
508,518 800,846
792,198 212,194
227,852 Calibrated
Btw - will it need a different HardSPL than standard devices?
slartiii said:
I guess it may be a prototype - the rom on it is dated to around March
Pasting for your the bootloader info here:
RHOD100 32M SS-BC
SPL-0.79.0000
MicroP-Rhodium (LED) v7
MicroP-Rhodium (KEY) v4
TURBO HW/TURBO SW
TP MFG DATA
508,518 800,846
792,198 212,194
227,852 Calibrated
Btw - will it need a different HardSPL than standard devices?
Click to expand...
Click to collapse
I don't reckon so, unless...
BTW: You're SPL is the same as almost every one elses.
Dave
will check my hardware info with qmat later today/tomorrow
checked with qmat - same samsung
sorry I can't be of more help
mike2037 said:
RHOD100 MFG 32M SS-BC
0.8.1000
Let me know of this helps you in any way. I have two of them.
Click to expand...
Click to collapse
exact version please? 0.8x.1000 where x is not shown currently.
cmonex said:
exact version please? 0.8x.1000 where x is not shown currently.
Click to expand...
Click to collapse
Sorry about that: 0.85.1000
mike2037 said:
Sorry about that: 0.85.1000
Click to expand...
Click to collapse
ah, nice, I have that one though
My bootloader shows a slight variation:
RHOD100 32M SS-BC
SPL-0.79.0000
MicroP-Rhodium (LED) vA
MicroP-Rhodium (KEY) v4
TURBO HW/TURBO SW
TP MFG DATA
508,534 804,862
807,213 209,210
202,852 Calibrated
Anything interesting to conclude from this?
Wiz said:
My bootloader shows a slight variation:
RHOD100 32M SS-BC
SPL-0.79.0000
MicroP-Rhodium (LED) vA
MicroP-Rhodium (KEY) v4
TURBO HW/TURBO SW
TP MFG DATA
508,534 804,862
807,213 209,210
202,852 Calibrated
Anything interesting to conclude from this?
Click to expand...
Click to collapse
You have a bog standard Touch Pro 2, the same as the other 99% of us .
Dave
DaveShaw said:
You have a bog standard Touch Pro 2, the same as the other 99% of us .
Dave
Click to expand...
Click to collapse
Damn, I knew HTC would not consider me to be special enough ;-)
Hi,
I am to flash my friends Blackstone, he bought it in china (were he lives) and his SPL number doesn't match anything what I get on the prompt is the following:
BLAC100 32M
SPL-1.19.0000
MicroP-BlackStone (LED) v6
When I search SPL-1.19.0000 it shows up an Elfin Hard-SPL releaser. Could this phone have been flashed and locked as an Elfin?
I am not familiar with this phone so I don't want to brick it, I was wondering which HSPL I should use in order to unlock. With google translate I think I can find a rom to flash with chinese text. Thanks in advance.
KW TP said:
Hi,
I am to flash my friends Blackstone, he bought it in china (were he lives) and his SPL number doesn't match anything what I get on the prompt is the following:
BLAC100 32M
SPL-1.19.0000
MicroP-BlackStone (LED) v6
When I search SPL-1.19.0000 it shows up an Elfin Hard-SPL releaser. Could this phone have been flashed and locked as an Elfin?
I am not familiar with this phone so I don't want to brick it, I was wondering which HSPL I should use in order to unlock. With google translate I think I can find a rom to flash with chinese text. Thanks in advance.
Click to expand...
Click to collapse
If your query is regarding HSPL, it should really be posted in the HSPL thread, no need for another thread.
To answer your query, you can use either HSPL 1.14 or HSPL 1.56, booth should work but it all depends on what rom you are going to flash. Any rom based on pre 1.56 should use HSPL 1.14 and any rom based on 1.54+ should use HSPL 1.56
unlock my diamond with HTC UNLOCKS.COM ALL WENT WELL WITH THAT AND I INSTALLED OMJ ROM AND ALL IT DOES IS STAY IN THE SMART MOBILITY SCREEN WAS ABLE TO GET IT TOO THE BOOTLOAD SCREEN OR TRI COLOR SCREEN BUT UN ABLE TO LOAD ANOTHER ROM THE BOOTLOAD SCREEN SAYS THIS SPL 135.0000 DIAM100 mfg 64M micro p - diam (led) V11 psoc- Diam stage_pvt vox30 and that all need help with this please any body dont want to thow it away htc p3700 unlock
Hey, go on http://www.htc.com/wwe and go to Support, select Touch Diamond, and install an Official ROM update. Cheers.
~codeslicer
Hi,
I got my second-hand HTC diamond touch. I tried to see what type of SPL I have by looking at the boot-loader screen. That is what I see:
---------
red:
DIAM100 MFG 64M
SPL-1.24.Hard
MicroP-Diam (LED) v11
green:
PSOC-Diam STAGE-PVT v0x30
blue:
(empty)
White:
Serial
---------
Does that mean I have hard SPL? If so, what kind? Will that allow me to install a new ROM (I am looking to improve the speed of the device)?
Thanks!
Ran