Database Develop

Need Help Newbeeee

Hi
I just got a dopod c800 AKA p4350.
Its got WM 5 on it. I wanted to upgrade the same to WM6.
Have read the threads but couldnt figure the english rom version and also need some help on upgrading.
can someone point me to the right rom and the instructions.
thanks

Whatever you do, if your SPL is currently 1.XX do NOT hardSPL or use USPL. Use the official RUU to attemp to flash your device. IF it changes your SPL and IPL to 4.xx then you can use HARDSPL and USPL.
Other than that, you can download the official WM6 from the thread that's stickied that talks about all the ROMs.

Radio problem

Hi can somebody tell me a radio rom which is for german cards like a vodafone card. I had the problem that i can not turn the phone on by every rom that i flashed. I had use the 1.17.25.26W and the 1.09.25.14 but both does not work

Have you installed the correct rilphone.dll? Is it Simlocked?

rilphnone.dll? what is this an where can i find it? It isn't simlocked

There is a radio thread why not use it???

crose1990 said:
Hi can somebody tell me a radio rom which is for german cards like a vodafone card. I had the problem that i can not turn the phone on by every rom that i flashed. I had use the 1.17.25.26W and the 1.09.25.14 but both does not work
Click to expand...
Click to collapse
are you using a WM 6.5 ROM? and, did you flash HardSPL (1.56 OliNex) to your device before flashing? not being able to turn the phone on with "every ROM you flashed" suggests that you have the wrong SPL (e.g., have not used HardSPL or USPL to prep your device before flashing).

I had used Hardslp 1.56 before flashing

I'm assuming from above post that HSPL 1.56 was successfully flashed then? Did you check SPL?
You can find rilphone for each radio in radio thread (which is where you should have posted your query!)
Please post further queries in that thread
Ta

Downgrade SPL and to Stock to return to Orange

Hi, I'm due to return my Touch HD back to Orange for a swap for a replacement handset, but I would like to make sure I return it back with the original Stock ROM and SPL.
If I switch on my phone with the vol key pressed, it shows that I have:
SPL-1.56.OliNex
And I am currently using the latest MaryOne ROM.
I have downloaded: RUU_BlackStone_Orange_UK_1.14.405.3_Radio_52.49a.25.26_1.09.25.14_Ship which I believe was the original Stock ROM for my phone. It appears that this ROM is the older 1.14 version.
Before flashing my device with this ROM, do I need to downgrade my SPL first? Or is there a way to make the phone use the Stock SPL? (The reason I ask this is because I remember reading the "dummies guide" and it said that in order to use the newer 1.56+ ROM's I had to upgrade the SPL, so my guess is I may need to downgrade now to install a 1.14 ROM?)
Could anyone clarify for me?
Thanks,
WizzKidd

wizzkidd said:
Hi, I'm due to return my Touch HD back to Orange for a swap for a replacement handset, but I would like to make sure I return it back with the original Stock ROM and SPL.
If I switch on my phone with the vol key pressed, it shows that I have:
SPL-1.56.OliNex
And I am currently using the latest MaryOne ROM.
I have downloaded: RUU_BlackStone_Orange_UK_1.14.405.3_Radio_52.49a.25.26_1.09.25.14_Ship which I believe was the original Stock ROM for my phone. It appears that this ROM is the older 1.14 version.
Before flashing my device with this ROM, do I need to downgrade my SPL first? Or is there a way to make the phone use the Stock SPL? (The reason I ask this is because I remember reading the "dummies guide" and it said that in order to use the newer 1.56+ ROM's I had to upgrade the SPL, so my guess is I may need to downgrade now to install a 1.14 ROM?)
Could anyone clarify for me?
Thanks,
WizzKidd
Click to expand...
Click to collapse
You are correct, if you are using a rom based on 1.14 you need to match the SPL or you'll get screen issues etc. You can either use HSPL 1.14 or return stock 1.14 SPL. All info can be found in this thread including how to return to stock rom & SPL (bottom of first post - section called 'How to reflash Stock/Shipped SPL - STEP BY STEP - FOR WARRANTY REASONS ONLY!')
Post further queries in that thread
Thread closed

htc diamond touch 100 stops at 0% when tryn to flash hspl

htc diamond touch 100 stops at 0% when tryn to flash hspl
pls help me out.
dia100 64m
spl-1.37.00
microp-diam[led] v11
psoc-diam stage pvt v030

You shud try SSPL method first to pass the HSPL. search for the SSPL here.

ayyu3m said:
You shud try SSPL method first to pass the HSPL. search for the SSPL here.
Click to expand...
Click to collapse
where should i search 4 it

here. see the attachments. first download and do JUMP SPL (SSPL) and then flash ur HSPL or the one i have attached here (1.93)

Downgrade your radio to one below 1.02.xxxxx before hardspl flash

Hey all,
I would like to add one thing that helped me - I had the same issue:
- Restore to original (eventually branded) stock ROM (this is needed for branded versions, worked for me also with radios higher than 1.02.xx.xx)
- Then install Hard-SPL
- Then MTTY
- Then newly cooked ROM
Hope our support can help you
Greets from Switzerland

dominica said:
htc diamond touch 100 stops at 0% when tryn to flash hspl
pls help me out.
dia100 64m
spl-1.37.00
microp-diam[led] v11
psoc-diam stage pvt v030
Click to expand...
Click to collapse
i have the same problem like but my SPL ver is 2.03.0000
the problem is that i cant use jumpspl anymore because i first tried to flash the device using MTTY so i formated my device and now i cant access its internal memory...can someone give me a rom for SPL 2.03 or tell me how to change SPL from USB because i can enter only in bootloader

magicdave26 said:
Downgrade your radio to one below 1.02.xxxxx before hardspl flash
Click to expand...
Click to collapse
pls help me with the steps to downgrade

Christoph21x said:
Hey all,
I would like to add one thing that helped me - I had the same issue:
- Restore to original (eventually branded) stock ROM (this is needed for branded versions, worked for me also with radios higher than 1.02.xx.xx)
- Then install Hard-SPL
- Then MTTY
- Then newly cooked ROM
Hope our support can help you
Greets from Switzerland
Click to expand...
Click to collapse
can u give me the site to download this files

ayyu3m said:
here. see the attachments. first download and do JUMP SPL (SSPL) and then flash ur HSPL or the one i have attached here (1.93)
Click to expand...
Click to collapse
hi
write file jump and finish but error 260 for HSPL 1.93

[Q] Can I install dynamics v2.0?

I want to install HSPL to be able to install custom ROM dynamics v2.0. But, it says you should not continue if you have SPL version 4.xxx or 5.xxx. I should have1.xx, 2.xx, or 3.xx to install the HSPL.
I came to know another solution to the problem by downgrading the SPL using NoDo.
What should I do? Can i install HSPL after downgrading my HSPL version using NoDo? Will that brick my phone?
My plan is to use NoDo to first downgrade my SPL from 5.xx to anything that is supportedby the HSPL, then I'll install HSPL by DFT, and then finally install a custom ROM called Dynamics v2.0.
Should I go through the whole process for installing a custom ROM on my phone?
Do let me know if you want to know something about the phone like the OS version, exact SPL version, etc

Have you searched for it?
You must use Y-Cable and the goldcard method... It is written in several threads, I recommend you "noobs guide no android", search for it I won't give you any lazy link...