Related
Hi Guys,
I have just found the (newest) ROM for my Mteor (RUU_MTeoR_1.34.251.1_1.38.00.10_HTCEUR_SHIP.rar) But I dont have ANY experience flashing my device with new ROMs
Should I just install this ROM and see what happens or do I have to make some extra actions to get this ROM properly installed?
Could anyone please help me (in a N00B language) to get my device updated?
I saw that some versions of the IPL (?) en SPL (?) makes differences, but I don't know what versions I use. What versions of IPL and SPL should I have?
THNX!
the original shipped rom updates depends on your device...
there is a "Code" called CID in the background...
with that upgrade you talking about you can flash only orig. HTC Devices (CID = QTEK_Z12) russian devices have QTEK_A07 ....
you can find that out when you connect with the term tool mtty for example...
but you could also try easiely flashing the shipped upgrade... when all works fine... if you have another cid there will be an error that you cid does not match... then you have to find a matching shipped upgrade..
if you want to flash a upgrade that not matches your cid you have to use sp3devs, DEV SSPL (have to use customRUUpdater) or his 77.7 SSPL (you can use orig. Shipped Updater)
i recommend that you first flash the latest orig. shipped update (1.34/1.38er Radio) after that you have to App unlock the device and then go on with WM6.1 ROM!
futureshock said:
the original shipped rom updates depends on your device...
there is a "Code" called CID in the background...
with that upgrade you talking about you can flash only orig. HTC Devices (CID = QTEK_Z12) russian devices have QTEK_A07 ....
you can find that out when you connect with the term tool mtty for example...
but you could also try easiely flashing the shipped upgrade... when all works fine... if you have another cid there will be an error that you cid does not match... then you have to find a matching shipped upgrade..
if you want to flash a upgrade that not matches your cid you have to use sp3devs, DEV SSPL (have to use customRUUpdater) or his 77.7 SSPL (you can use orig. Shipped Updater)
i recommend that you first flash the latest orig. shipped update (1.34/1.38er Radio) after that you have to App unlock the device and then go on with WM6.1 ROM!
Click to expand...
Click to collapse
Alrighty!!!
I shall keep you informed about my progress. (first try to flash my device only using the original ROM)
I did it... JOEHOE!!!
The Rom only did not work... so I downgraded te SPL (?, via this forum) After the downgrade the Rom worked!!!
DaLuca said:
I did it... JOEHOE!!!
The Rom only did not work... so I downgraded te SPL (?, via this forum) After the downgrade the Rom worked!!!
Click to expand...
Click to collapse
how did you downgrade the SPL?
version 1.10 is the new version from HTC (1.10>2.05)
version 2.05 is the old version from Qtek
BR
jerpelea said:
how did you downgrade the SPL?
version 1.10 is the new version from HTC (1.10>2.05)
version 2.05 is the old version from Qtek
BR
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=319448
Read the third reply... This worked for me!
DaLuca said:
http://forum.xda-developers.com/showthread.php?t=319448
Read the third reply... This worked for me!
Click to expand...
Click to collapse
you did not downgrade the SPL you upgraded it
1.10>1.09>2.05
jerpelea said:
you did not downgrade the SPL you upgraded it
1.10>1.09>2.05
Click to expand...
Click to collapse
oh... hmm... okay... sorry! Thats why the topic-title is "Rom update for a N00B"
But thanks that you cleared this question.
Needed
1.an BREEZE device[The phone must be able to enter bootloader (3color screen)]
2.TerraTermPro http://rapidshare.de/files/39206549/TeraTermPro.rar.html
3.An rom matching to your device
GUIDE
1.Disable active sync - uncheck
file->connection settings->allow usb connection
2.Put the phone in bootloader mode
power the phone pressing power and camera keys
read and note all displayed info
3.Launch TerraTermPro on the pc
un the connection window check serial and choose USB
in the new open window type
info 2
and note the information
RIGHT - HTCSQTEK_A07„§m»HTCE
WRONG - HTCSF kEØ(HTCE
close terra term
4.Figure out wich rom you need
till now i have roms for
Russian Rom
QTEK_A07
HTC__A07
http://rapidshare.com/files/109782599/RUU_BREE100_1.34.261.1_1.38.00.10_HTCRUS_SHIP.rar.html
WWE Rom (QTEK,HTC,Dopod,OCH)
QTEK_Z12
HTC__Z12
http://rapidshare.de/files/39206931/RUU_MTeoR_1.34.251.1_1.38.00.10_HTCEUR_SHIP.rar.html
DOPOD001 - Chinese Rom
http://www.megaupload.com/se/?d=YD49L7JD
5.
Flash the rom corresponding to your CID
6.
Boot the phone and application unlock it
7.
Run SSPL and UPGRADE to 6.1 rom and latest radio version
8.
Save the rom that saved you for latter - it colud help you again
IF YOU CANT FIND THE CID AND ROM HERE WAIT TILL SOMEBODY POSTS IT.
IN CASE OF "HTCSF kEØ(HTCE" IN TERRATERM IS VERY HARD TO REPAIR DUE TO DAMAGED BOOTLOADER
you can repair it using this guide
http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES
wich requires some advanced skills
OTHER ROMS - wich i dont have
i_mate_SP_JAS_1.15.301.0.exe
RUU_BREE100_1.15.71.6_1.06.00.00_OCH_Ship.exe
ruu_bree100_1.15.707.3_dopodwwe_ship.exe
ruu_bree100_1.15.709.3_dopodcht_ship.exe
Please help me to improve this list sending me CID's and ROM's
this is what i get
iinfo 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCE
Cmd>
what do you mean by very hard to repair? it's impossible?
this is the ROM i flashed back to my phone (although the flashing is 100% completed successfully, it is still stuck at 2nd boot WM logo screen)
RUU_BREE100_1.15.707.3_DopodWWE_SHIP.exe
i just uploaded th dopod rom in case anyone needs it
http://rapidshare.com/files/109798242/RUU_BREE100_1.15.707.3_DopodWWE_SHIP.exe
alexnvidia said:
this is what i get
iinfo 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCE
Cmd>
what do you mean by very hard to repair? it's impossible?
this is the ROM i flashed back to my phone (although the flashing is 100% completed successfully, it is still stuck at 2nd boot WM logo screen)
RUU_BREE100_1.15.707.3_DopodWWE_SHIP.exe
i just uploaded th dopod rom in case anyone needs it
http://rapidshare.com/files/109798242/RUU_BREE100_1.15.707.3_DopodWWE_SHIP.exe
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES
use this wisely
jerpelea said:
http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES
use this wisely
Click to expand...
Click to collapse
how do i put breeze into KITL Mode? is it the camera+power button tri-colour thing?
reads what stands on hermes wiki page...
maybe i'm talking ****, but i think too enter kitl mode you must have a running windows mobile...
just find the kitl mode "reset" on hermes its "now for your Hermes: hold the Comm button and soft reset and wait for the KITL dialog to appear, now is the CRITICALLY missed step; you need to press the small OK button on the LEFT of the device to activate USB KITL. "
futureshock said:
reads what stands on hermes wiki page...
maybe i'm talking ****, but i think too enter kitl mode you must have a running windows mobile...
just find the kitl mode "reset" on hermes its "now for your Hermes: hold the Comm button and soft reset and wait for the KITL dialog to appear, now is the CRITICALLY missed step; you need to press the small OK button on the LEFT of the device to activate USB KITL. "
Click to expand...
Click to collapse
exactly.. that's the worrying part for me now. i have no idea how do i enter KITL mode in breeze. any ideas?
alexnvidia said:
exactly.. that's the worrying part for me now. i have no idea how do i enter KITL mode in breeze. any ideas?
Click to expand...
Click to collapse
no
i did this on my hermes once
having the same problem as you have on breeze
hermes and breeze share the same platform
we have to find the answer
How did you manage to screw the bootloader
can you provide us a list of what you have flashed on the device?
what is the brand,model(herm 100/herm160),vendor,region of your device
i am triing to figure an solution
all others upgraded succesfully to 1.34 rus getting HTC__A07 CID and after that radio and wm 6.1
what did you do ?
BR
jerpelea said:
no
i did this on my hermes once
having the same problem as you have on breeze
hermes and breeze share the same platform
we have to find the answer
How did you manage to screw the bootloader
can you provide us a list of what you have flashed on the device?
what is the brand,model(herm 100/herm160),vendor,region of your device
i am triing to figure an solution
all others upgraded succesfully to 1.34 rus getting HTC__A07 CID and after that radio and wm 6.1
what did you do ?
BR
Click to expand...
Click to collapse
ok. i have no idea hoiw i screwed up the bootloader too. this is what happens.
i have a dopod 595 device, the breeze with forward facing video call camera, so it's a breeze 160. it's a Qtek_Z12 device and the region is WWE.
before you posted the new herm radio, i successfully updated to your beta WM6.1 using your unlocking SSPL guide. i never upgraded the SPL though. the original phone's IPL and SPL are IPL0.9 and SPL2.05.
so what i did was first to upgrade to the latest WWE 1.38 using your unlocking/SSPL guide, then upgrade to your WM6.1 beta. everything worked fine. i do notice that only the IPL has been upgraded, and the SPL remains 2.05. so i ignored it.
it was when you posted the new herm radio upgrade i then decided to update my SPL as well. so as per your instructions in the unlocking guide, i first unlock the phone (WM6.1), perform the SPL1.09 update. it was successful. phone booted up just fine. then i run the official WWE 1.38 (the same one i used before upgrading to WM6.1 beta). and this time i did not run the DES soft SPL ( i must have forgotten and thought the phone is unlocked anyway). the RUU started, and the flashing failed at 1% giving an invalid vendor ID error message (as expected because my phone is not superCID and i forgot to run DES SSPL). after this little incident, i canot boot my phone anymore.
so i tried to recover it using various methods. and i successfully flashed back the original WM5 WWE dopod 595 ROM by using the latest RUU from 1.38 with old WWE WM5 nbh. the flashing completed 100%, the phone reboots, and still stuck at the second boot screen. IPL has been downgraded to 0.9 and SPL remains 1.09.
what should i do now? i really appreciate you/anyone taking the time to look into this issue. thank you.
have you tryed a hardreset??
and did you cid is now screwed up??
alexnvidia said:
ok. i have no idea hoiw i screwed up the bootloader too. this is what happens.
i have a dopod 595 device, the breeze with forward facing video call camera, so it's a breeze 160. it's a Qtek_Z12 device and the region is WWE.
before you posted the new herm radio, i successfully updated to your beta WM6.1 using your unlocking SSPL guide. i never upgraded the SPL though. the original phone's IPL and SPL are IPL0.9 and SPL2.05.
so what i did was first to upgrade to the latest WWE 1.38 using your unlocking/SSPL guide, then upgrade to your WM6.1 beta. everything worked fine. i do notice that only the IPL has been upgraded, and the SPL remains 2.05. so i ignored it.
it was when you posted the new herm radio upgrade i then decided to update my SPL as well. so as per your instructions in the unlocking guide, i first unlock the phone (WM6.1), perform the SPL1.09 update. it was successful. phone booted up just fine.
Click to expand...
Click to collapse
here you needed the sspl to flash official rom
i think that i have this im my tread
then i run the official WWE 1.38 (the same one i used before upgrading to WM6.1 beta). and this time i did not run the DES soft SPL ( i must have forgotten and thought the phone is unlocked anyway). the RUU started, and the flashing failed at 1% giving an invalid vendor ID error message (as expected because my phone is not superCID and i forgot to run DES SSPL). after this little incident, i canot boot my phone anymore.
Click to expand...
Click to collapse
here you screwed the botloader
now you have an older ipl that does not know how to load the new SPL
so i tried to recover it using various methods. and i successfully flashed back the original WM5 WWE dopod 595 ROM by using the latest RUU from 1.38 with old WWE WM5 nbh. the flashing completed 100%, the phone reboots, and still stuck at the second boot screen. IPL has been downgraded to 0.9 and SPL remains 1.09.
what should i do now? i really appreciate you/anyone taking the time to look into this issue. thank you.
Click to expand...
Click to collapse
did you try to hard reset?
the two "-" keys and power
???
futureshock said:
have you tryed a hardreset??
and did you cid is now screwed up??
Click to expand...
Click to collapse
yes. i tried hard reset (two soft keys+power then press 0) many times. doesnt work. tried the mtty to format the phone, doesnt work.
here you screwed the botloader
now you have an older ipl that does not know how to load the new SPL
ok, firstly, when i loaded up the SPL1.09, the phone boots up fine. it only got stuck when the flashing to WWE1.38 failed. at this point i still have the new IPL.
the old IPL was flashed in during the recovery attempt when i tried to flash the old official WM5 ROM back hoping it would also downgrade the SPL, but it didnt. it only downgrade the IPL to 0.9. SPL remains 1.09
alexnvidia said:
here you screwed the botloader
now you have an older ipl that does not know how to load the new SPL
ok, firstly, when i loaded up the SPL1.09, the phone boots up fine. it only got stuck when the flashing to WWE1.38 failed. at this point i still have the new IPL.
the old IPL was flashed in during the recovery attempt when i tried to flash the old official WM5 ROM back hoping it would also downgrade the SPL, but it didnt. it only downgrade the IPL to 0.9. SPL remains 1.09
Click to expand...
Click to collapse
im my guide i wrote to use sspl
if you use sspl you finish the 1.34 upgrade from spl 1.09 and is everything fine
if not no
from here you had spl A07 so you could flash ONLY original htc Rus rom
you flashed an older ipl instead
an older ipl that does not load correctly the new spl
the spl can not be downgraded from 1.10(1.09) to 2.05
here is the problem
and as long as you dont have an rom with your CID od HARDSPL the phone can only be flashed using my hermes guide if we find the buton combination on breeze
BR
jerpelea said:
im my guide i wrote to use sspl
if you use sspl you finish the 1.34 upgrade from spl 1.09 and is everything fine
if not no
from here you had spl A07 so you could flash ONLY original htc Rus rom
you flashed an older ipl instead
an older ipl that does not load correctly the new spl
the spl can not be downgraded from 1.10(1.09) to 2.05
here is the problem
and as long as you dont have an rom with your CID od HARDSPL the phone can only be flashed using my hermes guide if we find the buton combination on breeze
BR
Click to expand...
Click to collapse
so what you mean now is my IPL 0.9 is WWE and my SPL is 1.09 Qtek A07? and this is causing the problem? so can i flash the IPL on the phone to the lastest one in tri-colour mode so that it can read the 1.09 SPL? can u please provide me with the SPL upgrade file and utility?
any solutions so far? guys?
alexnvidia said:
so what you mean now is my IPL 0.9 is WWE and my SPL is 1.09 Qtek A07? and this is causing the problem? so can i flash the IPL on the phone to the lastest one in tri-colour mode so that it can read the 1.09 SPL? can u please provide me with the SPL upgrade file and utility?
Click to expand...
Click to collapse
no
your problem is that ipl 0.9 cant load spl 1.09
the memory load address differs and it cant load it correctly
i havent found an solution
you need an valid spl loaded to flash
you can try all the original roms (don't edit them)
and see if any one of them tries to push ipl and spl before actualy flashing
also try the official 1.09 spl flash
BR
nowaday, I found this thread useful. thanks
what happened? I was upgrading to futureshock ver. 4 and during phone'd swiched off ... I was looking for original ROM posted here in Breeze forum, but I didn't find it ... after read this 1st post I recoginze, that Czech ROM official is RUS .. that news for me (of course good ).
KITL Hermes
I had ROM 6.1 from Futureshock...still problem with radio (my phone couldn´t accessble but signal icon shows good signal, radio version 1.38.0000), so I decided flash some original ROM. Aftet that my booting stuck on HTC logo or Windows Mobile logo. So I can´t use normal way to flashing. Only from SD card or first turn on phone to boot loader mode and than attach usb cable and start flashing. From SD card (where is renamed ROM BREEIMG.NBH) after enter into bootloader mode start loading and than just turn to trhreecolour menu where is BREE100 - IPL-0.90 and BREE100-1.10.0000 and doesn´t want continue. If I flash ROM via USB cable (first go to threecolour mode, than attach cable) than run ROMUpdateUtility.exe and flash process is being started but always die on 2%, than autoreboot and again stuck on HTC logo.
I tried hard reset, I tried lot of ROM versions HTCRUS, HTCEUR, QTEKEUR, FUTURESHOCK but still same problem during flash ROM stop on 2%...
I tried KITL Hermes unbrick method but same problems like had others on this forum, I don´t know how to turn my MTeoR to KITL debug mode because device is different like Hermes so key combination doesn´t matches with Breeze. MTTY - info 2 command show me CID: waiting interpreter failed...
Any ideas how to back life to my MTeoR?
Can I use application like MTTY? Could me help this program?
Thanks for any help...
DOPOD601
which RUS update rom can i use?thanks
HTCSDOPOD601in眘HTCE
which rom?
can somebody email to : [email protected] or [email protected] ?
thank you
Hello All,
I am living in israel and I bought HTC Diamond unlocked from US about 2 weeks ago, when i enter phone S/N in order to download ROM upgrade I get a message: "Sorry, this software download is not suitable for your device. " so I try to enter different S/N and finaly succeed to download: RUU_Diamond_HTC_Europe_1.93.401.2_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe
I tried to upgrade but I get a message: "this upgrade utility cannot be used for your pda phone"
why? does anyone had such a problem?
thanks in advance.
hello dude,
You will need to flash HardSPL first, to flash the rom.
or get the CID unlocked.
Search this site it has all the answers you need.
if you can post the seril number you used to download the rom, here so we can use it to down load roms that would be great.
hi to u 2 : )
can you explain about Hardspl?
serial I used: HT827GN20545
htako75 said:
hi to u 2 : )
can you explain about Hardspl?
serial I used: HT827GN20545
Click to expand...
Click to collapse
Everything you need to know about Hardspl can be found at the link below.
http://forum.xda-developers.com/showthread.php?t=416211
How can I know which HardSPL is suitable for my Diamond?
You can see my Diamond ver at my signature, if it is necessary for determine the HardSPL I need.
Thanks.
htako75 said:
How can I know which HardSPL is suitable for my Diamond?
You can see my Diamond ver at my signature, if it is necessary for determine the HardSPL I need.
Thanks.
Click to expand...
Click to collapse
follow the link: http://forum.xda-developers.com/showthread.php?t=415955
download tool for hardSPL
your HTC diamond will be unlocked and you can flash any ROM
With regards to attempting an upgrade using the recently released "official ROM" from the HTC website, am I correct in thinking the following:
* With a HTC Touch Diamond on Orange UK, I only need to use the SIGNED HardSPL because the phone is locked but the ROM offered on the HTC website is from HTC itself and therefore signed??
* With just this offical ROM, does the "Radio" also needed to be updated separately somehow? Or if I don't want/need to change the radio on my Diamond, then I just install the ROM update only?
Thanks in advance..
I download: Hard-SPL-Diamond-OliNex.zip
when I tried to install HardSPL it was written: 1.30 OliNex.
should it supposed to be 1.40 OliNex?
please advice.
Thanks.
In addition, I finaly take a risk and upgraded that HardSPL - it is 1.30 Olinex instead of 1.40. (I still don't understand why?)
The problem is that I tried to upgrade 3 different 1.93 ROM but every one of them don't really working it's stuck on 0% and after ~5 min I get Error 264.
Does anyone had such an Error?
please advice.
Thanks in advance.
try 1.40 oilnex
I used 1.93Olinex Unsigned for mine
Hi everyone,
Finally I succeeded to upgrade the ROM. (1.93.401.2 WWE)
The problem was that I tried to upgrade it with singed HardSPL (that is why it was 1.30 ver instead of 1.40).
Newbie life isn't so easy
Thanks to all of you.
hi
i've need some help urgently on this as the phone is being picked up in the morning and its currently going really bad
i had dutties 3.9 rom on, but i found a 1.19 orange rom in the wiki, so installed this.
however the display is very bad, and is only showing 16 colours so looks rubbish
I belive this is to do with the SPL
This is what i did:
1. put phone in bootloader mode (was displaying SPL 1.56)
2. ran blac_uspl.exe in USB mode which changed the SPL to 1.15 (USPL)
3. installed the rom
did i do something wrong?
any help VERY appreciated
Thanks
Did you tried to flash back your original SPL??
USPL is just a temporary patch of the SPL...
I think you have to flash back to SPL 1.15...
To check if you have the right version put phone in bootloader mode it should displaying SPL 1.15...
Read here http://forum.xda-developers.com/showthread.php?t=431217
D'rath
Ikkari said:
Did you tried to flash back your original SPL??
USPL is just a temporary patch of the SPL...
I think you have to flash back to SPL 1.15...
To check if you have the right version put phone in bootloader mode it should displaying SPL 1.15...
Click to expand...
Click to collapse
thats the problem
i dont know how?
D'rath said:
Read here http://forum.xda-developers.com/showthread.php?t=431217
D'rath
Click to expand...
Click to collapse
Thanks but thats for Hard SPL, where as i used USPL
or am i getting it all wrong?
D'rath said:
Read here http://forum.xda-developers.com/showthread.php?t=431217
D'rath
Click to expand...
Click to collapse
Just look in the first post under:
How to reflash Stock/Shipped SPL - STEP BY STEP - FOR WARRANTY REASONS ONLY!
very strange
its working now
just needed a hard reset!
thanks for your help
edit------------
scratch that, its displaying them stupid colours again
GREAT!
m.r.davies said:
Thanks but thats for Hard SPL, where as i used USPL
or am i getting it all wrong?
Click to expand...
Click to collapse
You are getting it wrong!
USPL is a temporary patch to allow you to flash a unauthorized ROM!
You have currently SPL 1.56 installed, but you need flash back stock SPL 1.15
Ikkari said:
You are getting it wrong!
USPL is a temporary patch to allow you to flash a unauthorized ROM!
You have currently SPL 1.56 installed, but you need flash back stock SPL 1.15
Click to expand...
Click to collapse
thanks
i understand the problem now
but the link that was posted talks about hard spl, and when it says about reverting the rom, it talks about using hard spl, which is where i'm getting confused
Could you clarify which steps i need to take as its still showing spl 1.54
thanks
m.r.davies said:
thanks
i understand the problem now
but the link that was posted talks about hard spl, and when it says about reverting the rom, it talks about using hard spl, which is where i'm getting confused
Could you clarify which steps i need to take as its still showing spl 1.54
thanks
Click to expand...
Click to collapse
go to http://forum.xda-developers.com/showthread.php?t=431217
view the very last part of first post. It teaches you EVERYTHING. I think the part that you confused is going from step3 to step4. Read carefully. =)
good luck.
m.r.davies said:
hi
i've need some help urgently on this as the phone is being picked up in the morning and its currently going really bad
i had dutties 3.9 rom on, but i found a 1.19 orange rom in the wiki, so installed this.
however the display is very bad, and is only showing 16 colours so looks rubbish
I belive this is to do with the SPL
This is what i did:
1. put phone in bootloader mode (was displaying SPL 1.56)
2. ran blac_uspl.exe in USB mode which changed the SPL to 1.15 (USPL)
3. installed the rom
did i do something wrong?
any help VERY appreciated
Thanks
Click to expand...
Click to collapse
1. dnload the stock spl from the said thread.
2. dnload the hspl 1.56 olinex wrapper
3. connect ur fone to pc in the bootloader mode.
4. run the hspl 1.56 olinex wrapper and do nothing to the onscreen utility.
5. wait fr the files to be xtracted in the window from where u ran the hspl wrapper.
6. replace the self extracted ruu_signed.nbh with the stock spl 1.15 that u downloaded.
7. continue with the ruu utility.
thats all thts needed..
ultimatepichu said:
go to http://forum.xda-developers.com/showthread.php?t=431217
view the very last part of first post. It teaches you EVERYTHING. I think the part that you confused is going from step3 to step4. Read carefully. =)
good luck.
Click to expand...
Click to collapse
Thanks
yes you're right, it solved my problem
the reason i didn't try in the first place was becuase the title said HARD SPL and i didn't want to mess it up as i used USPL
i used Restore_Stock_SPL_115.zip and swapped the nbh file after initilizing installation (after extraction) and it worked great
thanks for all your help guys!!!!!!
i really appreiciate it
My god, I was feeling your anguish while reading this topic until the end...
Black Antitoon said:
My god, I was feeling your anguish while reading this topic until the end...
Click to expand...
Click to collapse
I eventually went to bed at 2:30am
all sorted now and got my new phone!
woohoo
I have a SFR S300+ unlocked and hardspl, and all function of it are ok. But when I put my device into bootloader, I saw the red text "WLAN ERROR" under the text USB on bootloader screen. I don't know how to fix this problem, but I think if my device use the official rom, the bootloader will be downgrade to the original bootloader and solve this problem. But I can't find the official rom for SFR S300+, it only have official rom for DOPOD and HTC. Can I use DOPOD or HTC official rom for my device. Anyone can help me? Thank you.
phuonglev said:
I have a SFR S300+ unlocked and hardspl, and all function of it are ok. But when I put my device into bootloader, I saw the red text "WLAN ERROR" under the text USB on bootloader screen. I don't know how to fix this problem, but I think if my device use the official rom, the bootloader will be downgrade to the original bootloader and solve this problem. But I can't find the official rom for SFR S300+, it only have official rom for DOPOD and HTC. Can I use DOPOD or HTC official rom for my device. Anyone can help me? Thank you.
Click to expand...
Click to collapse
Official rOm from sFr and everything to get back to original can be found here, instructions in french :
Official sFr rOm
Official rOm from hTc can be found here :
Official hTc rOm
I would suggest you try to hard spl again with version Olipro 1.2
I had Olipro 1.3 and also ended with this WLAN error message,
plus flashing issues, so for me return to 1.2 and no problem ever
So, happy flashing.
brds,
nAr
narshorn said:
Official rOm from sFr and everything to get back to original can be found here, instructions in french :
Official sFr rOm
Official rOm from hTc can be found here :
Official hTc rOm
I would suggest you try to hard spl again with version Olipro 1.2
I had Olipro 1.3 and also ended with this WLAN error message,
plus flashing issues, so for me return to 1.2 and no problem ever
So, happy flashing.
brds,
nAr
Click to expand...
Click to collapse
Thank you so much. I'm going to flash these Rom.
I tried to flash with the NBH SPL in this SFR official Rom, but now when I put my device to Bootloader, it shows 3 bootloader screens:
- The fisrt is:
Trin 100
IPL -0.5
Trin100
SPL 1.3Olipo
USB
WLAN ERROR
- The Second is: Loading
- And the last is:
Trin 100
IPL -0.5
Trin100
SPL 1.3Olipo
USB
I don't understand what's happen with my device. Can anyone explain for me? Thank you.
If you mean there re 3 colors plus white, then it's normal
I see you have olipro 1.3, to get rid of the WLAN error install bootloader Olipro 1.2
Then, flash the so called "ROM".
narshorn said:
If you mean there re 3 colors plus white, then it's normal
I see you have olipro 1.3, to get rid of the WLAN error install bootloader Olipro 1.2
Then, flash the so called "ROM".
Click to expand...
Click to collapse
No, there are 3 screens appear in turn after I press Camera+Power buttons and reset. Thank for your repply.
The 3 screens are not normal. You should see a single, stable tricolor screen.
Could you try to return to Olipro 1.2 then tell me the result ? does it correct bootloader ?
brds,
nAr
narshorn said:
The 3 screens are not normal. You should see a single, stable tricolor screen.
Could you try to return to Olipro 1.2 then tell me the result ? does it correct bootloader ?
brds,
nAr
Click to expand...
Click to collapse
I try to use Olipro 1.2, and the result is the text "Wlan error" disappear, but my phone still have 3 bootloader screens. I think if I flash original rom with original bootloader, my phone will go back to normal. The rom you sent to me only have origin SPL, OS, and radio, not have original bootloader. Thank you (sorry for my English)
What about those "3 screens" ? here attached is a normal photo of the bootloader, eg style of screen
narshorn said:
What about those "3 screens" ? here attached is a normal photo of the bootloader, eg style of screen
Click to expand...
Click to collapse
Sorry for my late, narshorn. My first and last bootloader screens are same as the picture you attached, but the second screens only have grey colour with the text "Loading....".
phuonglev said:
the second screens only have grey colour with the text "Loading....".
Click to expand...
Click to collapse
This is not normal. Huuh, I think maybe need to be repaired.
narshorn, my last question: Can my SFR S300+ flash Dopod official rom which have IPL, SPL, Radio and OS?
phuonglev said:
narshorn, my last question: Can my SFR S300+ flash Dopod official rom which have IPL, SPL, Radio and OS?
Click to expand...
Click to collapse
Is there someone can answer my question?