Hi all, just looking for some advice. I was recently running CM6 on my G1 but I got a vibrant yesterday. With that said, i'm giving my g1 to my sister and was just gonna throw a Super D, or quicker donut rom of some sort so she doesn't have to deal with lag/learn how to use apps like setcpu and such, itd confuse her too much. When I try flashing back to any Donut ROM, i'm getting stopped at the boot animation. It's not even looping it, just consistently going. Any reason as to why? Here's some specs.
Danger SPL
Amon Ra 1.7.0
Newest G1 Radio
Thanks guys.
Try another 1.6 rom, there are faster out there. Just make sure that you wiped clean.
Use every wipe option on there.
Did you do a full wipe
sent from my badass slide running eugene's port of cm6
If you are using Firerat's MTD hack, you need to downgrade your recovery to ra-1.6.2. Remember that the new recovery does not agree with the old apps to sd. From there, do a full wipe, flash DRC83_base_defrangled, and super D. You should probably install the market ADW as well, (superD uses an old version of it), and also remove the spareparts and terminal just so she doesn't mess with it.
Related
i have done quite a few searches on this and yet have found nothing so i hope i dont get reamed for posting this.
if someone has a link for this answer id be very thankful.
if not then PLEASE SOMEONE EXPLAIN!!!!!!!
at the moment i am running drizzy hero rom. to do the update i did use the one touch root. on a second phone i did it manually. on both i added the hard spl and am running the RA v 1.2.1 recovery. I liked this ROM and wanted to see what bugs it had. after a few days i wanted to switch and try a different ROM I have dl most of the ROMs available and already have them on my sdcard once i did this no ROM would load except for Drizzy(new Vision v2.8). after trying a few things and accomplishing nothing i decided to redo EVERYTHING. unrooted my phone rooted again applied recovery made sure radio was to date and spl. and still nothing i cant even run the original jf1.5 that i was using before deciding to port. this issue is occuring on both phones. 1st phone was again done with one step root and the 2nd phone was done completly manually. I REALLY REALLY REALLY want to try these other roms SO PLEASE SOMEONE HELP. if you need more information on what i did with these phones ill gladly tell you step by step on what i did.
sorry for that.
I was using my G1 and also had a friends. On my g1 i used the one step root. I used the Instructions from The Unlocker.com. It uses flashrec.apk and also Amon Ra's recovery image. After that i went over to the How to Load a Custom ROM. same site. It asks you to check the Radio and the Spl. The radio is 2.22.19.26I and the spl used was the HARDSPL 1.33.2005.
Once i finished that i went and formated the sdcard to Fat32+Ext2+LinuxSwap also converted Ext2 to Ext3.Then I did-Move Dalvik Cache to SD. last 3 steps to speed up hero. after all of that I loaded 4 ROMS CyanogenMod ROM, jACXHeroSkiv Hero ROM v1.8, Drizzy’s NewVision TouchFlo ROM, and JF v1.5 Cupcake ROM. I have only flashed Drizzy's until last night.
I was unable to flash any other one and when i flashed back to drizzy I had problems loading it back but eventually loaded fully the issue was running the startup wizard it kept crashing. after a reboot it was ok.
Give us step by step on what you did and USE PARAGRAPHS
that whole thing looked like mumbo jumbo to me
put new lines where they belong to help separate out the steps you took
FIXED! thanks!
hobbitton said:
FIXED! thanks!
Click to expand...
Click to collapse
did you do a data wipe? you need to wipe going from hero to cupcake/donut
When I first did all of that I did. Am I supposed to data wipe everytime I switch the Rom?
hobbitton said:
When I first did all of that I did. Am I supposed to data wipe everytime I switch the Rom?
Click to expand...
Click to collapse
when your using hero rom's, yes.
if your upgrading cupcake roms (ie cyan 4.0.4 to 4.1.9.2 ), no
If its not working, WIPE
you cant go from hero to cupcake without wiping and not expect a lot of problems. they cause too many issues.
hero roms use the data partition differently
also remember to wipe /system/sd/ to clear all of that out. pull your /system/sd/ to your computer first though
thanks you guys it helped alot
I have a tmob G1 and I've been running cyanogen for months with no problem. When I updated to 4.2.12 I noticed performance issues that I'd never seen before. This is commented on a lot at the cyanogenmod site and thats where I did most of my research. I read a post where someone factory defaulted, and then re-installed 4.2.12 and said it was flying again. They use DRC83 defanged? I know where to find that but I'm not sure what it is or if I need that. Many ppl made like comments. I read that I should get the radio and recovery imgs at the htc site so I did and flashed both. This is where (I think) I made my first mistake as I have a G1 and not an ADP1. My phone is now running fine with stock 1.6 and the above radio but instead of G1 it says my phone is a ADP1 (obviously). I've tried to install cyanogen 4.2.13 but I'm guessing that I am not rooted anymore because I can't? I've tried the rooting ADP instructions from cyanogen wiki and that doesn't work. Looking at the same instructions for the G1 it says I need to downgrade to RC29 but that seems like a big step backwards. Is that what I need to do? Do I have to start all over again? I don't know what my next move should be? Thanks!
Gonna have to Use the DreaIMG and go back down(make sure dont have danger SPL,but you went back down so dont think you do) then get the "signed-dream_devphone_userdebug-ota-14721" and a recovery (i like amon ra 1.5.2) and get your fav rom( i would give superD 1.2 a try[1.6 requires danger SPL] and 1.2 seems the most stable) but if your goin to use cyan rom get the latest cyan rom, from there after flashed recovery go into recovery do a wipe then flash the dev ota, dont reboot, then flash cyans rom after do a reboot and should be back on cyan's rom
Brilliant! I'm back up and running latest cyanogen. I completely missed the part about dreaimg in the wiki instructions. Thanks for the help.
Also, out of curiosity, why do you like super d? Whats the difference between it and cyanogenmod? Thanks again.
Super D is, in a way, one step faster then the current CM build. It comes with a 10mb ram hack pre-installed as well which is always nice. Don't get me wrong, CM has a dedicated thread on 10mb ram hacks.
Ultimately, it comes down to user experience. And it's always nice to try something new.
jkapernicus said:
Brilliant! I'm back up and running latest cyanogen. I completely missed the part about dreaimg in the wiki instructions. Thanks for the help.
Also, out of curiosity, why do you like super d? Whats the difference between it and cyanogenmod? Thanks again.
Click to expand...
Click to collapse
I like Cyan roms just as much as anybody, to a personal pref. i had lot of problems, gapps went missing after updated, FC's and what not, and i did everything from going back down(dreamimg) to update from latest, still had problems, then i wen to superD and i notice a great increase of speed and all around well stabled rom
Alright well first off I've looked all over XDA for an answer if theres is one out there a Mod can remove this post. I'm not new to this at all I have been flashing roms since the Dream was released, just the other day i was thinking about trying out a new from King's new Legend coming from CM 4.2.15.1 as usual i wiped everything reformatted my SD partitions and installed the Legend rom, now for some reason i cannot get past the G1 screen on that or any other rom there is out EXCEPT CM 4.2.15 I attempted the same thing on my 32B MT and get the same problem it will not go past the MT green screen has anyone had this issue or would anyone be able to tell me whats going on I've tried everything i could think of and nothing works. Thanks for any help people!
theres a lot of other roms that require a different SPL than CM does. make sure you have the correct one installed. also, make sure to wipe before flashing.
I have kept that in mind and yes I have wiped before every flash I once again just now tried the CanNNoN202 rom correct SPL and all also running the latest radio still no go on either the MT3G or G1
wut does it say in bootloader screen ?
so lets see, i had my g1 running just fine with with cyans froyo, when i go to start using the mtd partitions that works out quit fine, more memory =]
but i start tryna flash other ROMs like speedteam and super froyo and i start realizing i get no market app anywheree i go
whether it be 1.6,2.1 or 2.2... i unrooted this morning but now i tried rooting again and i have the same issueee.. can some one please help me figure this one out, pm me if you got any ideas..
512 ext2
96 swap
danger spl
newest radio
amon ra's 1.7.0
and now supercdsi (no market )
g1 market app
looks like you need to flash google addon over cyanogen 6. its included in the download page of the rom
from what i know, the name of market starts with "v". since g1 has a very low memory, there where a lot of apps that were cut when you flashed it including youtube.
i see what your sayin, but i flashed all the gapps and for donut ive seen that i dont need too, and still it wont give me the market, but it will sync to my gmail account and load all my stuff, just no vending.apk
I have been trying to flash the CM7 Rom to my G1 and continue to get the same error messages... I tried uploading a pic but the app wouldn't let me, so I will try and get the pic posted asap
Sent from my LG-P999 using XDA App
what is your radio/spl?
also have you flashed many other roms before?
Please using following combination for Radio and SPL. Also note, flash radio first and then SPL otherwise G1 will not boot. Also make sure you have Clockworkmod recovery for CM7. This recovery helps for smooth flashing for CM7.
update_2.22.28.25_S - Radio
hboot0013d-signed - SPL
kudlinux said:
Please using following combination for Radio and SPL. Also note, flash radio first and then SPL otherwise G1 will not boot. Also make sure you have Clockworkmod recovery for CM7. This recovery helps for smooth flashing for CM7.
update_2.22.28.25_S - Radio
hboot0013d-signed - SPL
Click to expand...
Click to collapse
OK, this might be sorta a strange question, but this looks to be the best place to ask it.
Will the Dream be bootable if you flash only the Radio and SPL, leaving untouched the stock Android 1.6?
While I am a Linux geek, I am new to android and prefer to take things one step at a time. That explains why I have a Rooted dream with Amon RA with the stock 1.6 backed up with nandroid.
TheLexx said:
OK, this might be sorta a strange question, but this looks to be the best place to ask it.
Will the Dream be bootable if you flash only the Radio and SPL, leaving untouched the stock Android 1.6?
While I am a Linux geek, I am new to android and prefer to take things one step at a time. That explains why I have a Rooted dream with Amon RA with the stock 1.6 backed up with nandroid.
Click to expand...
Click to collapse
never tried, theoretically it should be as if you did a factory reset and you would just use your recovery to replace anything lost. but if you want to be safe maybe someone who has will chime in.
besides the point go ahead and flash a new rom, even if you stick with 1.6 firmware the developers have come out with much superior roms over the stock android. if you want only 1.6 try super d or super csdi
ok so i decided to test this out, updating a g1 to the 2708+ radio/spl and not flashing a new rom -------- stuck on g1 boot screen, hit call+menu+power then hit home to reboot to recovery, reflashed rom and gapps, rebooted, now everything is good as can be, so to answer your question --- yes it appears you need to flash a rom after you update your radio/spl