Database Develop

How to connect XDA IIi to broadband through WiFi connection?

I have BELKIN broadband router (Irish Eircom broadband). Is it possible to connect XDA IIi (alpine) to this router through WiFi connection??? If Yes - Help me!

Yes it is. If the router is on the default settings you just need to touch the antrenna symbol at the bottom of the Today screen, then the green square at the bottom right, then the WLAN box and turn on WLAN.

Does anyone have a guide on how to setup a secure connection between PC & Phone on WI-FI?
It's baffling the heck out of me!

symondavis said:
Does anyone have a guide on how to setup a secure connection between PC & Phone on WI-FI?
It's baffling the heck out of me!
Click to expand...
Click to collapse
Depends on the router, what ya got?

I dont have a router, I have a WI-FI PCI card and my router is conected via ethernet

So you are trying to set up an ad-hoc connection.
You need to set your wireless on both the computer and the PDA to ad-hoc.
To do this on the PC depends on your operating system and device. Set up your wireless connection on the PC first making sure it is set up as an ad-hoc network.
On your XDAIIi Start>Settings>Connections Tab>Network Cards
You should see the network you have set up on the PC, make sure the ad-hoc box is ticked and connect to it.
You may have to set the TCP/IP settings manually. If you have a problem with doing that post up what you have done and how far you have got.

Yes, I'v got a connection! But NetFront_v3.2 says "Cannot read page." So, i can not surf Internet.

krayvid said:
Yes, I'v got a connection! But NetFront_v3.2 says "Cannot read page." So, i can not surf Internet.
Click to expand...
Click to collapse
Do you have the DHCP server turned on on the router?

Yes1 DHCP server IS turned on on the router.

OK, when you are connected and you click on the Wi-Fi icon on the bottom of the screen, does the network address match that of the router or has it set a default one?

Internet Connection Sharing
Depeding on your OS (is it windows/linux etc.) you'll nmeed to set up some form of proxy server or other packet forwarding to persuade the machine to accept packets on the WiFi card and to forward them to the Internet.
If you are using XP (or from memory 2K) you can switch on Internet connection sharing, follow the wizard and then browse to your hearts content.
Dave

Hi,
I also have a laptop with build-in Wifi and a qtek 2020i. I've shared the lan connection on the laptop and created a wirelles network. The laptop and qtek 2020i see each other but i can't surf on the qtek. i have windows XP.
The ip address on the qtek is fixed by default and is supposed to be 192. etc i read somewhere...
I use a modem/routeur (thomson 530) on which the laptop is connected (lan).
Could you please explain me how should i setup or manuallay choose the ip on my qtek?
Many thanks
john

Hey there
I also have a Qtek 2020i and an access point USR9106.could you plz tell me how you managed to connect to your laptop ? Plz give me instractions so i can do it myself.Thanks

Re: Hey there
nkonte said:
I also have a Qtek 2020i and an access point USR9106.could you plz tell me how you managed to connect to your laptop ? Plz give me instractions so i can do it myself.Thanks
Click to expand...
Click to collapse
I have O2 XDA 2i. I changed RADIO. Was 1.00.00 now 1.03.00. No problem with connection straight to Wi-Fi router!!!

Re: Hey there
krayvid said:
I have O2 XDA 2i. I changed RADIO. Was 1.00.00 now 1.03.00. No problem with connection straight to Wi-Fi router!!!
Click to expand...
Click to collapse
perhaps i'll give that a try, it might work for me, i hope it does as i'm not having much luck

Hi Guys,
This is starting to get confused - there are two types of connection being set up here: -
Firstly a cabled connection between the PC and the router with a wireless card in the PC. in this instance you need to forward the packets from the wireless card to the ethernet card and then onto the router.
In this case, if you are using Windows 2K or XP use the Internet connection sharing wizard, this will then enable packet forwarding on your PC, with a "DHCP server" (not fully functional) on the wireless card, when you establish the Ad Hoc (set exactly the same SSID on both cards - remember it's case sensitive and that should be all you need for Ad-Hoc) wireless connection between the 2020i and the PC you should then find that you are assigned an IP address (192.168.0.x is the default from memory). You should then have the IP address of the Wireless Interface Card on the PC set as your default gateway and DNS server - you need each of these entries in order to able to connect to the Internet.
If you want to secure this connection, you can use WEP (40 bit or 128 bit Same Key same position on both SSID configs), though remember that if a sniffer collects about 300K packets, it is possible to use AirCrack to regain the wep key - paranoid but true.
If you have a wireless gateway, this should (in all probability) already have a DHCP service up and running on it (it's probably giving your PC all of the IP settings it needs) so all you should need is to establish a connection between these two devices. Switch wireless on on the 2020 and you should be prompted with a message box saying Your_SSID connects you to and offer you work and Internet, select Internet if there is a WEP key or other form of encryption enabled you will be prompted for a key. In theory you will have set all of this up on the router in the first place so probably have some idea of what you are doing.
Hope this helps, if not feel free to throw abuse.
Kind Regards
Dave

try this link:
http://www.mtekk.com.au/browse/page1090.html
I tried it last night and it got it working in about 5 minutes!! was well pleased . I'm using the infrastructure mode, got a XDAIIi and a D-Link G604T. I dont have any authentication setup, the only thing I use is the MAC based access list, so I had to add the XDA MAC into the router access list and for the rest I followed what the above link said.
Tip: make sure you do a reset for the settings to take effect, did'nt realise thats why it took me five minutes!

hiya... sorry to bug anyone about this... but i have a problem logging on wifi connection on my Xda IIi...
using a dell TrueMobile 2300 wireless router...
(( i got a stinking feeling i might not able to do this.. cos been trying the last 4 hours and i just recalled whenever a com wants to link up with this router.. that com have to go thru it's Cd to Authz it first.. . ))
Any help would be greatly appreciated!

WPA WiFi connection
The only secure WiFi connection I can use on my XDA IIi is via WEP. For some unknown reason I cannot connect using WPA.
Any ideas...

Confused: WiFi setup please....

I'm confused. My IE instance quite happily connects to my 3G t-mobile connection when no connections are enabled. However, when I enable the WiFi - the little mast icon says connected... but IE can't find anything. I'm assuming its a DNS issue. I've tried disabling MAC address security, and it made 0 difference to the failure to connect - so I'm assuming the MAC address I typed into my router was the right one. (Can't even find the TyTnII MAC address now!)
So - what do I need to do to ensure that the TytnII loads the WiFi connection when at home, and actually allows me to surf? I tried putting in the router address as DNS - and it didnt make any difference either. What next? Too many options!!!!
Graham

If its over a wep network(which it probably is) you need the key(passcode)...

Nope - got that - (and it only prompted for the passkey once - so I guess it stored it somewhere). Its got something to do with DNS - because it cannot resolve names (like google.com!) - but I don't know how to check this out. Are thetre tools like TRACEROUTE / IPCONFIG etc for WM6??
Graham

Try removing any proxy servers that might be configured.

Go to settings/connections/wi-fi and tap your connected Wireless Network to configure. In next screen check if "Connects to:" is set to "The Internet" . If set to "Work" IE will use your 3G dataconnection. When set to "The Internet" IE will use your WI-FI connection. When you are outdoor and your home WI-FI connection is not available IE will then automaticly use your 3G connection again.
Hope this helps as it works this way with me.
Klipper

I am having this same problem , did you manage to sort yours out ?

Does your WiFi network use a proxy to get to the internet?

installer09 said:
I am having this same problem , did you manage to sort yours out ?
Click to expand...
Click to collapse
Yep - I reset my wireless router - and everything started working. Looking in the wrong place as always!
Graham

And how do you connect to public wi-fi spots without havin TyTN try to connect over 3G?
Thanks

Can you access the internet when connected via ActiveSync?

With my trusty old Ipaq 5550 i could, but for some reason i cant with my Kaiser.
I had a look in the manual but couldnt find this.
Any tips?

It should work automatically.
Perhaps in your comm manager, active sync is greyed out and needs to be enabled.
Or perhaps in your configuration screen: connections tab, usb on pc (or sometinglike that), you can (un)check a box about advanced network connectivity.

yes for me work You must change in Connections->Advanced->Select network first field where you have your ISP to My Work Network.

Stay0Puft said:
perhaps in your configuration screen: connections tab, usb on pc (or sometinglike that), you can (un)check a box about advanced network connectivity.
Click to expand...
Click to collapse
EXACTLY.
Mine was checked, once i UNchecked it. I had internet conectivity.

I have all default and CHECKED use advanced network functionality and it works fine, even when syncing over bluetooth I can get to the internet through ActiveSync

Thanks, been wanting to do this for ages.
Now I have got it working.

Okay, this is a long message but I have had a unique problem in which I had to fiddle with activesync and my PDA for several days to figure it out. So in case this is your problem look here.
Scenario:
At my work we have a proxy server. When i connect my phone to my computer, even though activesync and my PDA are set to connect properly neither my phone nor my computers internet works. I fooled with this, posted on the forums and finally found a way to fix it.
Steps:
1)Change your PDA's advanced network settings in the network management area to BOTH be "mywork network". Do this before plugging in to activesync.
2)load an internet page with streaming content, or constantly refresh a web page if your work blocks all sites!
3)Ensure that your activesync is set to connect to the "work network".
4)Plug in your phone (be sure that data is still streaming on your desktop, if an active connection isn't streaming on your desktop Windows uses logarithms to decide which connection to use as an internet source).
5)Let activesync load and syncronize. Once it is syncronized, go back to your pda's network management page and change the two options BACK to MEdia Net or whatever data service you use on your cell phone. NOTE: Be sure that media is streaming all the way until you change your PDA's options BACK to the proper internet source for your phone and test it by loading a web page. Once the phone is set as it's own internet source and the desktop still has it's active LAN connection you should be golden.
I know you shouldn't have to do this but at least with my works network and their proxy server if i don't do it this way i will NEVER be able to use the internet on either device.
The reason for this is because of Microsoft's crappy network capabilities. In activesync 4.0 + they made activesync use an actual network connection, you can view it via the network connection page. So with some networks (not all) it tries to use your phones connection as the active internet network and vice versa at times.
Hope this helps somebody out there as this drove me nuts!
So far i'm the only person that has had the problem (on this forum, at least that has responded to my threads). But i'm sure there are a couple other people that have annoying problems with their work and activesync.
Thanks,
Luke

Thanks a lot alaiwy, worked just fine for me!

For the AT&T Tilt & AT&T ROM's you also need to disable the Proxy.

_Dejan_ said:
yes for me work You must change in Connections->Advanced->Select network first field where you have your ISP to My Work Network.
Click to expand...
Click to collapse
TY I was looking for this finally becuase that was getting very annoying as hell to me.

Please Please Please someone respond to wifi connection problems

hello all..ive posted several threads about this..even saw other people having the same problem..
connects to wifi route fine..i have mac address ip..etc says its connected..but thats it..cant do anything else with it..cant connect to internet at all
used the same settings i have with other wm6 unit..it works fine on that..but not my diamond
why why why !!!!!!!
had this damn fone for about 4 months now still cant get it to connect !!!
had wm fones since they first came out...never have i had this problem before

What about DNS??

plasticplanet said:
hello all..ive posted several threads about this..even saw other people having the same problem..
connects to wifi route fine..i have mac address ip..etc says its connected..but thats it..cant do anything else with it..cant connect to internet at all
used the same settings i have with other wm6 unit..it works fine on that..but not my diamond
why why why !!!!!!!
had this damn fone for about 4 months now still cant get it to connect !!!
had wm fones since they first came out...never have i had this problem before
Click to expand...
Click to collapse
If there are other treads about this subject, you should respond in those threads rather that cluttering up this forum.

ref clutter
jmermel said:
If there are other treads about this subject, you should respond in those threads rather that cluttering up this forum.
Click to expand...
Click to collapse
i would but seems like no one has bothered to help out in other threads either

are you sure that you are using the "right" encryption? perhaps you have wpa2
(tkip or aes) and the device checks only wpa? or you enter the wrong password in
wep, then the connection looks like it is established, but you can do nothing with it!
just a thought...

yep
TML1504 said:
are you sure that you are using the "right" encryption? perhaps you have wpa2
(tkip or aes) and the device checks only wpa? or you enter the wrong password in
wep, then the connection looks like it is established, but you can do nothing with it!
just a thought...
Click to expand...
Click to collapse
hello...yep..everything is entered correctly..as i say ive been setting them up for years..this one connects fine..have all the boxes ticked but cant actually use the internet..works fine on all my other wm units

Stupid question tbh but I see this sort of thing every day nearly..
Your subnet is the same as the router yes? Does dhcp allocate one out to you or have u got a static ip on the phone?
Despite being connected to the wifi access without being on the same network you will not gain net access.

Who is your carrier for cell service? If you're on AT&T, and you've run an auto-setup CAB file for your cellular network settings, then you may need to double check your connection and proxy settings. Usually the solution is to select the correct network connection and NOT try to use your carriers proxy when you're connected via Wifi.
If you ARE on AT&T, then do this... Go to Start > Settings > Connections tab > Connections > Advanced tab > Select Networks button. Set both drop down entries to MEdiaNet... for most this will have NO adverse impact (assumes you have a data plan too). OK to save selections.
Now go back to those MEdiaNet drop down selections. Edit either one of them. Go to the Proxy Setting tab. Uncheck the second box indicating this network connection uses a proxy. OK the settings... enjoy non-proxied Internet freedom via Wifi.
If you're not on AT&T, maybe the same proxy issue could be present. But I couldn't help you with your settings. Hope this helps.

ref
hotmail said:
Who is your carrier for cell service? If you're on AT&T, and you've run an auto-setup CAB file for your cellular network settings, then you may need to double check your connection and proxy settings. Usually the solution is to select the correct network connection and NOT try to use your carriers proxy when you're connected via Wifi.
If you ARE on AT&T, then do this... Go to Start > Settings > Connections tab > Connections > Advanced tab > Select Networks button. Set both drop down entries to MEdiaNet... for most this will have NO adverse impact (assumes you have a data plan too). OK to save selections.
Now go back to those MEdiaNet drop down selections. Edit either one of them. Go to the Proxy Setting tab. Uncheck the second box indicating this network connection uses a proxy. OK the settings... enjoy non-proxied Internet freedom via Wifi.
If you're not on AT&T, maybe the same proxy issue could be present. But I couldn't help you with your settings. Hope this helps.
Click to expand...
Click to collapse
hey..thank you for having little think about it..but im in the uk..t-mobile and those settings having nothing to do really with connecting to my wifi at home..except tell my phone it can..which i did..
all the settings are correct...exactly the same settings im using on other wm devices but when they say its connected i can actually do something..rather than on the diamond where it says its connected but doesnt allow me
ive set the phone up identical to another wm6 phone in every way..that connects fine and i can use my wifi ..this phone i cant

Have you tried connecting to a different wifi router, a friend or whatever?
If you can connect there, then that narrows down the problem to your settings, or your router, or the router setup
Do you know anyone else with a Diamond that could try to see if they could connect to your router?
If they can connect but you can't then you could take a look at their connections. Or it could mean a faulty device. If they can't connect either, then this will give you some clues.
I'm assuming that you've deleted the connection and reformed it. Did you choose work or the internet? Have you tried changing that.
Have you tried changing the Authentication to Shared?
Each time you make a change you need to let it 'set' for a few seconds and then reboot.
Can you connect to the internet via Activesync pass-through?
Sorry, that's all I can think of at the moment. If something else occurs to me I'll post back.

Hi.. I'm not sure if this will help or if you already have tried it.
But I had the same problem and the solution was this:
Pres start -> Settings -> Connection -> Wireless Lan -> power mode
Now use best settings, instead of battery save. ( Im not sure if the translation is 100% right. Translated from danish Diamond)
At the start I couldn't load any pages with Wi-fi, though there was no problem with the connection from the router. But now it works like a charm

hey
marisa4755 said:
Have you tried connecting to a different wifi router, a friend or whatever?
If you can connect there, then that narrows down the problem to your settings, or your router, or the router setup
Do you know anyone else with a Diamond that could try to see if they could connect to your router?
If they can connect but you can't then you could take a look at their connections. Or it could mean a faulty device. If they can't connect either, then this will give you some clues.
I'm assuming that you've deleted the connection and reformed it. Did you choose work or the internet? Have you tried changing that.
Have you tried changing the Authentication to Shared?
Each time you make a change you need to let it 'set' for a few seconds and then reboot.
Can you connect to the internet via Activesync pass-through?
Sorry, that's all I can think of at the moment. If something else occurs to me I'll post back.
Click to expand...
Click to collapse
i have tried all except find someone else with a diamond..activesync connects fine and can connect when in sync..as ive said before i have another wm6 device..connects exactly the same way and works fine..this just wont..well connects but doesnt allow me to go any further

yahoooooo or wifiiiiiiiiiiiiiiiiiiiiiiii
BottchDK said:
Hi.. I'm not sure if this will help or if you already have tried it.
But I had the same problem and the solution was this:
Pres start -> Settings -> Connection -> Wireless Lan -> power mode
Now use best settings, instead of battery save. ( Im not sure if the translation is 100% right. Translated from danish Diamond)
At the start I couldn't load any pages with Wi-fi, though there was no problem with the connection from the router. But now it works like a charm
Click to expand...
Click to collapse
well thank you guys very very much...ive used a combination of BottchDK and marisa4755
i removed my wifi connection and forced it to connect from default again..entered my passkey..wacked the old wifi on full power and NOW HAVE WIFI
it does seem devilishly slow though..but think ive read that on some thread before..think will have a looksy about that...
MANY MANY thanks again

Excellent news!

oh no it wasnt actually wifi !!!!!
marisa4755 said:
Excellent news!
Click to expand...
Click to collapse
hey all..sorry but the problem still exists !!!
cant connect..looking at lan settings..
status - Associated to network
it shows connected but status only associated..please tell me when the smeg is going on with this darn diamond before i through it against the wall !!!

This was the solution for me
I have had the same problem Imy phone even should be picked up by the repair centre then as a last try someone gave me the idea to change the leaver at wireless lan/energymodus to the left (best conection) and whala, I have tried it later whit my phone almost on the wirelesspoint to set it to best batterymode but not even at the middle it would do anything, it says conected but no data is comming to the phone, just when the leaver is at his almost left it will work.
Good luck.
Willem

-Have you tried a hard reset? (Data will get lost! Backup first)
-Mac filter activated on the router?

yep tried all
Mr.Eliot said:
-Have you tried a hard reset? (Data will get lost! Backup first)
-Mac filter activated on the router?
Click to expand...
Click to collapse
hello again..yes tried hard reset..have the power set to max..clicked my heals together 3 times also !!!
never in my life have i had such i problem..must have had dozen wm based phones which none of them i had this problem..still have wm2003 unit..wm5 and 6 unit all of which will connect just fine..i dont have the mac filter setup on my router
(

-Have you analyzed your router's log already?
-What is set under Start => Settings => Connections => Connections => Advanced => Choose Networks (translated it, not sure about the exact words)?
-Data connections via UMTS or GPRS do work?
-Go and try another router of a friend or internetcafe.

ive checked
Mr.Eliot said:
-Have you analyzed your router's log already?
-What is set under Start => Settings => Connections => Connections => Advanced => Choose Networks (translated it, not sure about the exact words)?
-Data connections via UMTS or GPRS do work?
-Go and try another router of a friend or internetcafe.
Click to expand...
Click to collapse
yep gprs works fine..looking in the wifi i have all the mac address ip speeds blah blah you could ever wish wish for..just as you would expect if it was connected..which it says it it..but only associated lol

wifi settings problem on kaiser

Hello friends, i am new to windows mobile but it doesnt mean that am a n00b , i got my Dad's TyTN 2 as he is now using a different phone ,so right now i am in my university hostel which provides free wifi internet facility, i have been using wifi without any issues on my nokia N82 and my laptop but i cant seem to configure my kaiser properly with the wifi settings assigned to me by the university network administrator, the settings which i have is
IPv4 192.0.11.9
subnet mask 255.0.0.0
proxy server 192.0.0.1 port 3128
when i configure these settings on my N82 or laptop ,wifi works fine but it doesnt works on kaiser even though it connects but it doesnt seem to open any web page or update quickgps or any other internet app ,3G/GPRS is working fine on it though and also internet works on it when its connected to the laptop through activesync
can anyone please help me and tell where should i put these three settings , maybe i messed up and inserted wrong setting in other places,
thanks in advance

utsav2707 said:
Hello friends, i am new to windows mobile but it doesnt mean that am a n00b , i got my Dad's TyTN 2 as he is now using a different phone ,so right now i am in my university hostel which provides free wifi internet facility, i have been using wifi without any issues on my nokia N82 and my laptop but i cant seem to configure my kaiser properly with the wifi settings assigned to me by the university network administrator, the settings which i have is
IPv4 192.0.11.9
subnet mask 255.0.0.0
proxy server 192.0.0.1 port 3128
when i configure these settings on my N82 or laptop ,wifi works fine but it doesnt works on kaiser even though it connects but it doesnt seem to open any web page or update quickgps or any other internet app ,3G/GPRS is working fine on it though and also internet works on it when its connected to the laptop through activesync
can anyone please help me and tell where should i put these three settings , maybe i messed up and inserted wrong setting in other places,
thanks in advance
Click to expand...
Click to collapse
Set your wifi settings > power mode > in best performance

that subnet mask does not look right to me. but it's not like I'm some expert network technician lol

gmaniac2008 said:
Set your wifi settings > power mode > in best performance
Click to expand...
Click to collapse
i have already tried that before, as i mentioned too that wifi connects but i cant open any web page on the device

where have you entered the proxy settings?
1. if the wifi connects, you should be able to ping the machines on the LAN that your device has "entered". first make sure this works.
2. for internet to work, the general convention for network admins is to set up a network with a gateway. however, it seems that your network admins have used the proxy approach (probably to better control/filter the content accessed by users on the LAN)...i am not certain where exactly the proxy information needs to be entered on your device for things to work properly but if the answer for (1) above was positive, then my money is on incorrect proxy settings on your device.