I don't know enough about compiling kernals, so I'm curious if this is something another dev will have to do after a proper version of 5.0.7 is released, or are there kernals that can be flashed now to have it?
I have CM7 7.0.3 on my nook color. There has been alot of nightlies since then and I heard that one of the more recent nightlies lets the nook go to sleep mode to save batt life. My question is can I just install the one nightly i want or do I have to install all of the ones before it too?
Just the nightly you want.
Just the one you want
Still rocking the Incredible with the XDA Premium App.
FYI anything above nightly 78 you need uboot 1.2 and kernel .32 Also there have been more than a few people that have been having problems with wifi on several of the latest nightlys. I would recommend to flash nightly 78 latest gapps and ext4 4/24 Oc kernel assuming you have the latest clockworkmod recovery. You will benefit from way better battery even though its not fully at deep sleep.
jzibit17 said:
FYI anything above nightly 78 you need uboot 1.2 and kernel .32 Also there have been more than a few people that have been having problems with wifi on several of the latest nightlys. I would recommend to flash nightly 78 latest gapps and ext4 4/24 Oc kernel assuming you have the latest clockworkmod recovery. You will benefit from way better battery even though its not fully at deep sleep.
Click to expand...
Click to collapse
I just instaled nightly #86 and Darlingrins latest OC Rom and everything runs fine. I have kernel 2.6.32.9. Don't know my uboot #
jzibit17 said:
FYI anything above nightly 78 you need uboot 1.2 and kernel .32 Also there have been more than a few people that have been having problems with wifi on several of the latest nightlys. I would recommend to flash nightly 78 latest gapps and ext4 4/24 Oc kernel assuming you have the latest clockworkmod recovery. You will benefit from way better battery even though its not fully at deep sleep.
Click to expand...
Click to collapse
Nightly 86+ has a custom uboot that installs with the nightly.
dvrdwn said:
I just instaled nightly #86 and Darlingrins latest OC Rom and everything runs fine. I have kernel 2.6.32.9. Don't know my uboot #
Click to expand...
Click to collapse
Are you able to overclock your NC using that combination? I have gone through the same steps multiple times on my device (upgrading from 7.0.2), using the exact same combination you list above, but my device won't OC above 925MHz.
Just wondered if your system is allowing OC above 925...
I'm able to oc to 1200 MHz with above combo
Sent from my NookColor using Tapatalk
ruggles531 said:
Are you able to overclock your NC using that combination? I have gone through the same steps multiple times on my device (upgrading from 7.0.2), using the exact same combination you list above, but my device won't OC above 925MHz.
Just wondered if your system is allowing OC above 925...
Click to expand...
Click to collapse
Yes, over clocking to 1100 just because 1200 is alittle new. Make sure you have the latest OC rom from darlingrin. It should be dated somewhere around 5/24 0r 5/25 I forget for sure but it's one of those dates. The older roms didn't work with 7.0.3. don't know if there was a prob with 7.0.2.
Which nightlies support Netflix?
[edit] nevermind. I found this thread. [/edit]
Any CM7 supports Netflix, but you will need to do the build.prop edit.
Rodney
dvrdwn said:
Yes, over clocking to 1100 just because 1200 is alittle new. Make sure you have the latest OC rom from darlingrin. It should be dated somewhere around 5/24 0r 5/25 I forget for sure but it's one of those dates. The older roms didn't work with 7.0.3. don't know if there was a prob with 7.0.2.
Click to expand...
Click to collapse
That's so weird. I seem to be using the exact same build as everyone else...getting no errors on install, but can't overclock above 925MHz....
Did you just install the kernel by copying the ZIP file to an SD card, then booting CWM??
Hey guys, loving CM7, but the nightly im using has a few quirks(no bluetooth, shuts off at 15% battery). I had tried phiremod before, but it didnt include any recent kernels and was stuck at 925mhz. So, i went back to what i had with the amazing 1300mhz. Since im trying it again, where would i get the latest oc kernel for the latest version of phiremod?
I forgot to ask, do CM7 specific kernels also work? If so, i feel stupid.
Pherimod is cm7+themes+apps so yeah cm7 kernels will work.
I was using the stable 7.0.3 with Dalingrin's OC at 1200, I just upgrade to cm7.1.0-RC1 and now I need to upgrade the kernel as well , the stock for RC1 it only allows OC to 925. So the questions is what OC kernel is recommend for RC1
I forget the exact version, it may be 0630 if someone can confirm, or just dig around for it.
Or update to the newer nightly releases, they have it built in.
I just install the [9/01/11] latest one and so far no issues.
okay now that I have spend some time with the RC1 and the new OC Kernel 9-1-11 when am listening to music it freezes some times and the continues
i need a kernel that supports both upto 1.5 or 1.6 OC and allows costum boot anim and root to stock rom thx in advance
btw is it worth swiching to CM7 or miui ?
You can try TalonDev
ST3MC said:
i need a kernel that supports both upto 1.5 or 1.6 OC and allows costum boot anim and root to stock rom thx in advance
btw is it worth swiching to CM7 or miui ?
Click to expand...
Click to collapse
If you are using CM7 you can flash the Glitch kernel. But I am warning you, it won't be stable. 1.4 is the usual upper limit, and even then a lot of games won't run properly.
theandroidboy said:
You can try TalonDev
Click to expand...
Click to collapse
but its only 1.2 oc i need 1.4 and above and for the other guy i dont have CM ihave stock rom
Tornado kernel Aureus Neutrino runs stable at 1.5, is rooted and proven.